1377 - 1377-01-692-4231, JP18 - JSF Cartridges as attached.

Forms / Attachments / Pricing Sheets

This document is a Contract Data Requirements List (CDRL) that outlines various data items required from a contractor for the F-35 Ejection Seat Items system under contract N00104-26-N-B001. It specifies the type of data, submission requirements, and distribution.

Each Data Item Number (e.g., A001, A002) represents a specific deliverable required from the contractor. These include:

• Product Baseline Index (PBI/PBL)
• Obsolescence Alert Notice
• Diminishing Manufacturing Sources and Material Shortages (DMSMS) Health Assessment Report
• Acceptance Test Plan
• Test/Inspection Report
• Failure Summary and Analysis Report
• Radiographic Test Technique (RTT)
• Radiographic Report and Film
• As Built Configuration List - Common (ABCL-C)
• Energetic Materials Analysis Report
• Ammunition Data Card (ADC)

For each data item, the CDRL specifies:

• Contract Reference
• Distribution Statement (primarily Statement E, authorized for DoD components only)
• Frequency of submission
• Submission dates (first and subsequent)
• Required copies (Draft, Final, Regular Reproduction)

This document is crucial for potential bidders as it details the specific reports, plans, and data that will be required under the contract. Understanding these requirements is essential for accurately estimating proposal costs and ensuring compliance if awarded the contract. It highlights the types of technical documentation and analysis expected for the F-35 Ejection Seat Items.

Statement of Work (SOW)

This Statement of Work (SOW) outlines the requirements for preparing Ammunition Data Cards (ADCs) for the USAF & USN.

• ADCs must be prepared in accordance with MIL-STD-1168 and tailored for the CAD/PAD program as per MIL-STD-962.
• Procedures for assigning lot numbers for energetic materials are detailed.
• Requirements for listing energetic materials include common name, manufacturer's part number & revision, lot number, and date of manufacture.
• Traceability for energetic materials must be ensured through documentation like Certificates of Conformance (COC), Certificates of Analysis (COA), or Quality Assurance Records (QAR).
• Contractors may list their own internal part numbers but must also include the actual manufacturer's information.
• Hardware components must be traceable to the original manufacturer's lot identification information.
• Organic materials (epoxies, sealants, etc.) require OEM traceability with DOM.
• Materials or components that do not affect the reliability or safety of the end item (e.g., solvents, paints) do not need to be listed.

Not explicitly stated in this document, but it pertains to the preparation of ADCs for ammunition.

• Traceability is a key requirement for all materials and components.
• ADCs must be entered into the Worldwide Ammunition-data Repository Program (WARP).
• A "sample" ADC must be generated and approved before submitting final production lot ADCs.
• A hard copy of the applicable ADC(s) must be included with each shipment.
• Access procedures for the MHP-WARP system are provided for both government/contractor employees with and without CAC accounts.
• Contractors must notify the system administrators of new contracts and provide specific information within 30 days of receipt.

Form / Attachment / Pricing Sheet

This document, "CAD/PAD Item Marking Instruction, Version 1.6," dated 06 March 2023, provides detailed instructions for marking Cartridge Actuated Devices and Propellant Actuated Devices (CAD/PAD) components. It outlines the requirements for both Human Readable Information (HRI) and Machine Readable Information (MRI) markings, specifically focusing on the implementation of Item Unique Identifiers (IUID) as mandated by DoD policy.

• Scope: Applicable to both new production and remanufacture of CAD/PAD components.
• Marking Requirements: Mandates the use of Data Matrix ECC 200 for MRI markings, adhering to MIL-STD-130 and the DoD UID Guide.
• HRI Data: Includes Item Nomenclature, Manufacturer's CAGE, Item Lot Number, Item Serial Number, and Manufacturer's Part Number. Optional markings like DOM (Date of Manufacture) are also detailed.
• MRI Data Construct: Specifies the Data Matrix ECC 200 format, including Data Identifiers for CAGE, Part Number, Serial Number, Lot Number, and Date of Manufacture (in Julian Date format).
• Placement: Details methods for marking items via data plates/labels, ink/laser etching, or self-adhesive labels for small items.
• Kit Marking: Outlines requirements for marking kits and ship-sets, including individual components within them.
• JSF F-35 Instructions: Specific guidance for F-35 components, requiring an Electronic Equipment Logbook (EEL).
• Waivers: Waivers to the UID requirement are not permitted; requests for waivers to marking methods may be considered.

This document is crucial for any bidder involved in the production, remanufacture, or supply of CAD/PAD components. It defines the mandatory marking standards that must be applied to items, labels, and packaging. Understanding and complying with these marking requirements, including the specific data elements and formats for HRI and MRI (Data Matrix ECC 200), is essential for successful contract performance and acceptance of deliverables.

Form / Attachment / Pricing Sheet

This document is a Request for Variance (RFV) Form (DD Form 1694) used to request a change or deviation from established contract requirements. It details a proposed variance for the JM60 Catapult battery voltage check.

• Variance Title: JM60 Catapult battery voltage check
• Variance Classification: Critical
• Description: Add a battery voltage check after the "NO-FIRE SENSITIVITY" test and before functional tests to ensure battery voltage remains above required levels.
• Need for Variance: To ensure that the No-Fire tests do not reduce the battery voltage below the required minimum.
• Corrective Action: An Engineering Change Proposal (ECP) is in process to update the Technical Data Package (TDP).
• Affected Items: Inflation Device, Water Activated FLU-11/A (Part Number 855AS110, 1812-172-01) and Training System XXX.
• Affected Systems: CKU-5C/A (JM60) system, F-16, F-22.
• Effectivity: Applicable to Lots K999-12345 and K999-67890.
• Cost Impact: No per unit or total cost impact is identified ($0.00).
• Schedule Impact: No impact to the schedule is anticipated.
• Contract Information: Associated with Contract N00104-23-C-K999, CLIN 001.
• Attachments: Includes "Block 12 - Additional Information.pdf".

This RFV indicates a potential change to the contract requirements related to testing procedures for the JM60 Catapult system. Bidders should review the attached "Block 12 - Additional Information.pdf" for further details on the proposed variance and its implications on the system's performance, testing, and potential contract modifications. It highlights a critical aspect of system testing and maintenance.

Form / Attachment / Pricing Sheet

This document is an Ammunition Data Card (ADC) Master, Revision 16, dated June 13, 2023. It serves as a "birth certificate" for a specific lot of ammunition, providing detailed manufacturing and quality control information. It is used for malfunction investigations and ammunition reclassification.

• Lot Information: Includes NSN, Nomenclature, Contractor, Lot Number, Net Quantity, Packing, Contract/Order Number, Drawing Number, Spec Number, and dates related to production and inspection.
• Technical Data: Details Net Explosive Weight (US and Metric), Zone Weight, Charge Weight, and Max Pack Depth.
• Testing Data: Specifies the number of Test Samples (LAT/FAT), Test Site, TS Date Shipped, and TS Mode Shipped.
• Components: Lists all components of the ammunition, including drawing number, revision, manufacturer, date, lot number, and quantity manufactured for each part.
• Remarks: Provides additional lot information, including delivery order details, lot serial number ranges, sample serial numbers (LAT/FAT, RETAIN, REJECT, OVREAGE/ATTRITION), and any rework information.
• Waivers and Deviations: Lists any approved variances (RFV) applicable to the manufactured lot, with descriptions.

While this document is primarily for internal government tracking and quality control, bidders involved in ammunition procurements may find it useful for understanding the detailed specifications, components, and manufacturing history of specific lots. It can provide insight into the quality and traceability requirements for ammunition components and assemblies. The document also outlines access procedures for the Worldwide Ammunition Repository Program (WARP), which may be relevant for understanding data management and reporting requirements.

Solicitation / RFP / RFQ

This solicitation, N0010426RK004, issued by NAVSUP Weapon Systems Support, is for the procurement of CCU-183/A, Automatic Deployment Units (ADU). The solicitation details various CLINs for these units, intended for use in F-35 aircraft across multiple countries and years (production and sustainment).

• The primary deliverable is the CCU-183/A, Automatic Deployment Unit (ADU), with specific MBA part numbers and drawing numbers provided for each CLIN.

• Technical Data, as detailed in DD Form 1423, Exhibit A, is required for several CLINs.

• Production Lot Test Samples and Investigative Units are required for CLIN 0001AB and 0001AC, respectively.

• DFARS 252.211-7003, Item Identification and Valuation, is applicable to most line items, requiring DoD unique identification or a DoD recognized unique identification equivalent.

• The contract type is not explicitly stated, but the solicitation includes "Offer" and "Offeror" sections, typical of solicitations.

• The period of performance is implied by the "FY26 Sustainment" and "Lot 20 Production" designations across various CLINs.

• Estimated value is not stated in this document.

• Offers are to be received electronically via email to andrew.e.emrich.civ@us.navy.mil until 01:00 PM local time on 23 Mar 2026.

• Section L provides proposal submission instructions.

• Section M outlines evaluation factors for award.

• No specific set-aside information is present in this document.

• This solicitation includes a "Critical Safety Item" (CSI) for CLIN 0001.

• The solicitation is rated DO-A6 under the Defense Priorities and Allocations System (DPAS).