30 FSS PCC Sound Installation

Statement of Work (SOW) / Performance Work Statement (PWS)

To install and integrate a new Audio/Visual (A/V) system at the VSFB Pacific Coast Club, replacing outdated and failing equipment with modern, user-friendly components. The goal is to provide clear audio throughout the facility, with easy management for end-users and minimal IT support.

• Replace ceiling speakers throughout the building with 40 SAROS ICE6LPT-W-T-EACH speakers, and purchase additional units as needed.

• Repurpose existing JBL speakers in the Ballroom and Warrior Room.

• Install and configure 8 Shure UA864US or equivalent microphones in various rooms.

• Install 10-15 additional SAROS ICE6LPT-W-T-EACH speakers in the café/bar, requiring new cabling and ceiling holes.

• Install 8 SAROS SMT6T-AW-B-T-EACH exterior speakers for the café/bar and Heritage Room outdoor seating areas.

• Replace two wall mount touch panel faceplates in Warrior Rooms 1-2 with TSW-770-W-S.

• Install five TSW-770-W-S wall mount touch panel faceplates in Ballrooms 1-3, café/bar, and Heritage Room.

• Ensure touch panel faceplates can connect to phones via Bluetooth or wired audio.

• Enable direct TV box audio connection in the Café/Bar.

• Purchase and install 60 Cat6 drops for cabling.

• Set up a master TS-1070-W-S tabletop touch panel faceplate in the main office for facility-wide control.

• Configure speakers, touch panels, two DSP-1280 signal processors, 2 AMP-8150 amplifiers, and CEN-SWPOE-30 POE.

• Configure Shure wireless receivers for 13 microphones.

• Uninstall all old equipment and prepare it for removal by FSS IT.

• Installation should be completed no later than the month of August.

• The work will be performed at the VSFB Pacific Coast Club.

• Existing AV rack will be reused.

• Equipment must be configured to prevent tampering with cables and hardware.

• Seven touch panel faceplate locations are required for audio control.

• A master control in the main office will manage all rooms simultaneously.

• Contractor must possess required knowledge and skills for installation, voltage, audio tuning, programming, and user-friendly systems.

• Government will furnish electricity and emergency medical services.

• Equipment is already purchased and available for installation.

• Trenching is not required; all cables will be run through ceiling tiles.

Form / Attachment / Pricing Sheet

This document is a pricing schedule template provided for bidders to input their pricing information for the opportunity. It outlines the specific items for which quotes are required and provides fields for company details, pricing, and contact information.

• Company Information: Fields for Company Name, Type of Business, E-mail Address, CAGE Code, Tax I.D. (TIN), and DUNS #.

• Pricing Details: Line items for "Removal and Installation of Audio Equipment" and "PCC Audio Equipment." Bidders are to input Unit Price and Extended Price.

• Quotation Validity: Prices must be valid for at least 90 days.

• Payment Terms: Field for specifying payment terms.

• Period of Performance: Field for estimated period of performance.

• Quote Expiration Date: Field for the quote expiration date.

• Contact Information: Fields for Phone Number and Quoted By.

• NAICS Code and Size Standard: NAICS 334310 with a size standard of 750 Employees.

• Only input data into the highlighted yellow cells.

• Contractors shall NOT alter the RFQ other than to provide required information/pricing.

• Ensure compliance with FAR 52.204-7, System for Award Management (SAM). Registration in SAM is mandatory for award eligibility.

This document is critical for bidders to understand the required format for submitting their pricing proposal. It details the specific items to be priced, the required company information, and submission guidelines. Failure to complete this schedule accurately and according to instructions may render a bid ineligible.

Forms / Attachments / Pricing Sheets

This document lists clauses and provisions that are incorporated by reference into the solicitation (FA461026Q0018). It serves as a reference for bidders to understand the contractual terms and conditions that will apply to any resulting contract.

• Clauses Incorporated by Reference: A table listing clause numbers, alternate/deviation numbers, clause titles, year/month of the clause, and the section of the contract where they apply.
• Clauses in Full Text: Provides the full text for specific clauses, such as 252.204-7017, which addresses the prohibition on the acquisition of covered Defense Telecommunications Equipment or Services.
• Specific Clauses Highlighted: Includes details on:
  • Requirements relating to compensation of former DoD officials.
  • Prohibition on acquisition of covered defense telecommunications equipment or services.
  • Electronic submission of payment requests and receiving reports (WAWF).
  • Buy American-Free Trade Agreements-Israeli Trade Act.
  • Statement of Equivalent Rates for Federal Hires.
  • Safeguarding Covered Defense Information and Cyber Incident Reporting.

Bidders must review these clauses and provisions to understand their obligations and the terms of the potential contract. Key areas of focus include:

• Representations and Certifications: Bidders need to be aware of requirements for representations regarding business operations, telecommunications equipment, and compliance with trade acts.
• Payment Procedures: Understanding the electronic submission of payment requests via Wide Area WorkFlow (WAWF) is crucial for timely payment.
• Compliance: Clauses related to safeguarding information, labor standards, and prohibitions on certain procurements are critical for compliance.
• Offeror's Responsibility: Bidders must ensure they can meet all requirements and accurately represent their compliance status.

Form / Attachment / Pricing Sheet

This document is a Wage Determination issued by the U.S. Department of Labor, Employment Standards Administration, Wage and Hour Division. It establishes the minimum wage rates and fringe benefits required for various occupations under the Service Contract Act for a specific geographic area.

• Wage Determination Number: 2015-5647, Revision No. 26
• Area: California County of Santa Barbara
• Occupational Listings: Provides a comprehensive list of job titles, corresponding occupational codes, and their required minimum hourly wage rates.
• Fringe Benefits: States that fringe benefits are required and follow the occupational listing. Specific details on health and welfare benefits, vacation, and holidays are provided in later sections of the document.
• Executive Orders: References Executive Order 13706 (Paid Sick Leave) and Executive Order 13658 (Minimum Wage), outlining their applicability and requirements.
• Footnotes: Includes specific notes for computer employees and air traffic controllers/weather observers regarding applicability and pay differentials (night pay, Sunday pay, hazardous pay).

This document is critical for bidders responding to solicitations that fall under the Service Contract Act. It dictates the minimum wages and benefits that must be paid to employees performing work on the contract. Bidders must ensure their proposed labor costs align with these requirements to be compliant and competitive. Failure to adhere to these wage determinations can lead to non-compliance and potential penalties.

Form / Attachment / Pricing Sheet

This document is a "Single Source Justification (Simplified Acquisition)" used to explain the rationale for soliciting a brand name or equal product for the PCC Sound System Installation. It outlines why only one source is deemed reasonably available to meet the government's minimum needs.

• Project/Program Name: PCC SOUND SYSTEM INSTALLATION
• Supplies/Services Required: Design, installation, and testing of a complete, integrated audio-visual and sound reinforcement system for the Peterson Conference Center (PCC).
• Justification Basis: Cites FAR 6.302-1 ("Only one responsible source") and DFARS 206.103-170(c) for using a brand name or equal description.
• Reasons for Brand Name/Equal:
  • Interoperability and Compatibility: Ensures seamless integration with existing AV infrastructure.
  • Essential Physical and Performance Characteristics: Meets unique acoustic properties and physical constraints of the PCC, with performance benchmarks based on specific components.
  • Aesthetics: Meets the facility's requirement for a professional and uniform appearance.
• Efforts to Obtain Competition: States this is not a sole-source procurement and full competition will be sought among small businesses. Providing "brand name or equal" specifications aims to enhance fair competition by ensuring offerors understand minimum standards.
• Contracting Officer's Determination: Confirms that only a single source is reasonably available.

This document informs potential bidders that the solicitation will likely specify "brand name or equal" requirements for the sound system. Bidders should pay close attention to the salient characteristics detailed in the solicitation to ensure their proposed "equal" product meets the government's minimum technical, performance, and aesthetic needs. It also indicates that competition will be sought among small businesses.

Solicitation / RFP / RFQ

This document is a combined synopsis/solicitation (Request for Quotation - RFQ) for commercial services related to "30 FSS PCC Sound Installation." The government is procuring these services and is requesting quotes. A written solicitation will not be issued separately.

• Detailed description of requested parts and services are found in Attachment 1 (Statement of Work) and Attachment 2 (Salient Characteristics).

• Vendors are required to complete and return Attachment 3 (Pricing Schedule).

• The estimated award date is 01 May 2026.

• The period of performance is estimated from 1 August 2026 to 31 August 2026.

• Performance is required at Vandenberg SFB, CA 93437.

• Funds are not presently available and are contingent upon appropriation.

• Quotes are due no later than 1:00 PM (Local) on Thursday, 16 April 2026.

• Questions are due no later than 1:00 PM (Local) on Thursday, 9 April 2026.

• Submission of questions and quotes should be via email to SrA Christopher Mendoza (christopher.mendoza.17@spaceforce.mil) and Contracting Officer Rick Porter (rick.porter.1@spaceforce.mil).

• The government intends to award to the lowest priced quote that is technically acceptable.

• Evaluation will be based on Price and Technical Capability.

• This acquisition is a 100% Small Business Set-Aside.

• The applicable NAICS code is 334310 with a size standard of 750 Employees.

• The government reserves the right to award some or all line items, or to cancel the solicitation.

• Costs incurred in preparing a response are the responsibility of the firm and will not be reimbursed.

• Inspection and acceptance of deliverables will be performed by the Point of Contact (POC) in the contract award.

Form / Attachment / Pricing Sheet

This document outlines the Salient Characteristics/Requirements for the PCC A/V Install. It serves as a checklist for vendors to indicate whether their proposed products meet or exceed the specified requirements.

• Specifications and Requirements: A list of 12 specific items, ranging from "Installation of existing Crestron equipment" to "Belden PVC Pipe."
• Must be same as Preferred Brand name: Columns for "Equal To," "Greater Than," and "Lesser Than" are provided for each item, with pre-filled "1"s indicating a requirement to meet or exceed.
• Technical Review: Sections for "Vendor Name" and "Quote #" are included, followed by columns for "Vendor 1" through "Vendor 4" to mark "Yes" or "No" for meeting the requirement.
• Explanation of "No" Evaluation: A dedicated section for vendors to provide detailed explanations for any "No" responses.
• Notes and Line Item: Fields for additional notes and line item pricing.

This document is crucial for bidders as it details the exact technical specifications and requirements for the A/V installation. Vendors must use this form to demonstrate how their proposed equipment and services meet each salient characteristic. The "Technical Review" section will be used to evaluate vendor compliance, and the "Explanation of 'No' Evaluation" section is critical for any deviations from the stated requirements.