316 CES Washer Dryer and Cooktops Maintenance

Amendment / Modification

This document is Amendment 02 to the Combined Synopsis/Solicitation FA286026Q0011. The solicitation issue date was updated to 14 April 2026, with Amendment 02 issued on 26 May 2026. The response deadline has also been updated to reflect the SAM.gov posting date.

• Solicitation Issue Date
• Amendment 02 Issue Date
• Response Deadline

Bidders should note the updated dates for the solicitation issue and response deadline. The specific response deadline is now indicated from the SAM.gov posting.

Amendment / Modification

This document is Revision 9 of the Performance Work Statement (PWS) for Lease Washers/Dryers & Electric Cook Tops. The PWS details the requirements for the contractor to furnish, install, and maintain contractor-owned appliances.

• The PWS itself has been revised to Revision 9, dated May 26, 2026.
• Appendix A, "Appliance Requirement and Locations," lists the quantities and types of appliances required at various facilities on Joint Base Andrews.
• Section 5.0, "Transition Period," outlines the timeline and requirements for the transition of work, including a two-week period from June 16, 2026, to July 1, 2026.
• Section 6.0, "Lease Terms," specifies the lease period from July 1, 2026, to June 30, 2031, with a potential extension to December 31, 2031.
• Section 6.4, "Leased Equipment & Locations," details the base quantities of various appliance types, totaling 385 units.
• An optional requirement for 80 units for Building 1690 is acknowledged, with the government having no obligation to exercise this option.

This revision updates the PWS and associated details, including transition timelines and lease terms. Bidders should refer to this revised PWS for all requirements related to the lease, installation, and maintenance of washers, dryers, and electric cook tops.

Form / Attachment / Pricing Sheet

This document is the U.S. Department of Labor's Wage Determination No. 2015-4281, Revision 37, issued under the Service Contract Act. It provides the minimum wage rates and fringe benefits required for various occupations when performing contract work in specific geographic areas.

• Geographic Areas Covered: Virginia (Alexandria, Arlington, Fairfax, Falls Church, Fauquier, Loudoun, Manassas Park, Manassas, Prince William, Stafford), District of Columbia, and Maryland (Charles and Prince George's Counties).
• Occupational Listings: Includes a comprehensive list of job titles, corresponding occupation codes, and their minimum hourly wage rates.
• Fringe Benefits: States that fringe benefits are required and follow the occupational listing. Specific details on health and welfare, vacation, and holidays are provided in later sections.
• Executive Orders: Notes the applicability of Executive Order 13706 (Paid Sick Leave) and Executive Order 13658 (minimum wage rate adjustments).
• Conformance Process: Outlines the process for contractors to request additional classifications and wage rates if an occupation is not listed.

This document is crucial for bidders to understand the minimum labor costs associated with performing the contract. Bidders must ensure their proposed wages and benefits meet or exceed the rates and requirements specified in this wage determination to be compliant. Failure to adhere to these wage rates can lead to contract violations.

Form / Attachment / Pricing Sheet

This document is an Excel spreadsheet containing a contractor price estimate, specifically a breakdown of CLINs (Contract Line Item Numbers) for various supplies and services. It appears to be an attachment to Amendment 02 of the solicitation.

• The spreadsheet lists multiple CLINs (0001 through 0012, and repeated for CLINs 1001-1012, 2001-2012, 3001-3012, 4001-4012, and 5001-5012).
• Each CLIN specifies a 'Supplies/Service' item, quantity, unit, unit price, and total.
• Items include various types of washers, dryers, laundry centers, and cook tops, all referencing specific paragraphs in the PWS (Performance Work Statement).
• Option CLINs are identified for certain items (e.g., 0009, 0010, 0011).
• The document includes multiple identical tables, potentially representing different contract periods or task orders, each totaling 385 units.
• Unit prices and total costs are not filled in, indicating this is a template for pricing submission.

Bidders should use this spreadsheet to understand the specific items and quantities required for the contract, as detailed in the PWS. They will need to populate the 'Unit Price' and 'Total' columns to submit their pricing proposal or estimate. The repetition of CLINs suggests potential for multiple contract phases or task orders, which bidders should consider in their overall pricing strategy.

Form / Attachment / Pricing Sheet

This document is a "Condensing Dryer Dimension Guide" providing detailed specifications and installation clearances for Whirlpool dryer models WCD3090JW, WCD5090JW, YWCD3090JW0, and YWCD5090JWO. It is intended to assist bidders in understanding the physical requirements for installing these dryers.

• Dryer Dimensions: Front, side, and back views with precise measurements in inches and millimeters.
• Installation Clearances: Recommended and minimum spacing for various installation types, including recessed areas, closets, under-counter, and mobile homes. Specific ventilation requirements for closet installations are noted.
• Drain System: Details on connecting the drain hose to different outlets (floor drain, wall standpipe, floor standpipe, laundry tub) and important considerations to prevent siphoning and ensure proper function.
• Electrical Requirements: Specifies 120/240 V or 120/208 V, 60 Hz AC on a separate 30 A circuit.

This document is crucial for bidders to determine if the specified dryer models can be physically accommodated within the intended installation space. It highlights critical dimensions, required clearances for ventilation and servicing, and specific electrical and drainage requirements that must be met for successful installation. Understanding these specifications is essential for accurate equipment selection and site preparation.

Form / Attachment / Pricing Sheet

This document provides detailed specifications for the Speed Queen Commercial Top Load Washer – Military model. It is intended to inform potential bidders about the technical characteristics and performance capabilities of the equipment being offered.

• Model: LWN432SP115TW01
• Control Option: Manual
• Color: White
• Capacity: 16 lb (7.3 kg)
• Cylinder Volume: 3.19 cu. ft. (90.3 liters)
• Spin Speed: 710 RPM (150 G-Force)
• Motor Size: 0.5 HP (0.37 kW)
• Water Consumption: 27.9 gal (106 liters) per cycle
• Electrical Requirements: 120V/60Hz/1-15 Amp
• Water Pressure: 20-120 p.s.i.
• Cylinder Finish: Stainless Steel
• Net Weight: 186 lb (84.4 kg)
• Shipping Dimensions: 28" W x 30" D x 45" H
• Agency Approvals: cULus
• Available Cycles: Soak/Prewash, Heavy Duty/Permanent Press, Normal Eco, Delicate
• Available Water Temperatures: Hot, Warm, Cold

This specification sheet is crucial for bidders to understand the exact product being procured. It details the physical dimensions, performance metrics, electrical and water requirements, and available features of the commercial top load washer. Bidders must ensure their proposed equipment meets or exceeds these specifications to be considered compliant.

Form / Attachment / Pricing Sheet

This document provides detailed specifications for the Speed Queen Commercial Stack Dryer – Military model, including dimensions, electrical requirements, heating elements, and performance metrics. It is intended to inform potential bidders about the physical and technical characteristics of the equipment being offered.

• Model: Commercial Stack Dryer – Military (Manual Homestyle, Solid Door)
• Dimensions: Overall Height: 75.38" (1915 mm), Width: 26.875" (683 mm), Depth: 28" (711 mm)
• Capacity: 18 lb (8.2 kg) per dryer
• Electrical Requirements: Varies by model (e.g., 120/208/240/60/1-30 amp for electric, 120/60/1-15 amp for gas pilot)
• Heating Element: Electric (5350W, 240V or 4100W, 208V) or Gas (22,500 Btu)
• Performance: High efficiency exhaust blower (220 cfm / 105 liters/sec), industry's largest door opening (2.06 sq. ft.), quiet operation.
• Controls: Independent controls for each dryer, ADA Compliant for the bottom dryer.

This specification sheet is crucial for bidders to understand the exact product being procured. It details the physical size, power requirements, and performance capabilities of the stack dryers, which will influence installation planning, utility hookups, and overall suitability for the intended application. Bidders must ensure their proposed solution meets or exceeds these specifications.

Form / Attachment / Pricing Sheet

This document provides detailed specifications and dimensions for Whirlpool Electric Built-in Cooktop models, including RCS2002R, RCS2012R, RCS3004R, RCS3014R, and RCS3614R. It is intended for installation planning and ensures proper fit and safety clearances.

• Product Model Numbers: Lists the specific models covered.
• Overall Dimensions: Provides measurements (A, B, C, D) for the cooktop units.
• Electrical Requirements: Specifies a 4-wire or 3-wire, single phase, 240-volt, 60 Hz, AC only electrical supply on a separate, 40-amp circuit. Notes that 15" models require a 20-amp circuit.
• Cabinet Opening Dimensions: Details the required cutout sizes and clearances (A through L) for installation into cabinetry, including combustible area clearances and counter thickness limitations.
• Installation Notes: Includes specific instructions for a 21" model regarding rear of cabinet/wall clearances and counter thickness.

This document is crucial for bidders to understand the physical and electrical requirements for installing the specified cooktop models. It details the necessary dimensions for cabinetry and electrical connections, which are essential for accurate product selection and installation planning.

Questions & Answers / Clarifications

This document provides the government's responses to vendor questions submitted as part of a Request for Information (RFI) for the FA286026Q0011 opportunity, specifically concerning washers, dryers, and cooktops at Joint Base Andrews.

• Existing Equipment Identification: Vendors inquired about the specific model numbers or pictures of existing washers, dryers, and cooktops. The government provided specific model numbers for an electric cooktop (2 burners), stackable washer/dryer, commercial top-load washer, and front-load ADA washer. It also provided model numbers for ventless dryers.
• Attachment Clarification: The government clarified that attachments provided with the RFI are for illustrative purposes only. They demonstrate required dimensions, spatial configurations, and technical specifications or current contract models but do not represent an endorsement of specific makes, models, or brands.
• Evaluation Basis: The government will evaluate all offers based on meeting or exceeding the minimum performance and dimensional requirements specified in the Performance Work Statement (PWS), not solely on the illustrative models provided.
• Incumbent Contract Models: In response to a question about incumbent contract models and ventless dryers, the government provided specific model numbers for ventless dryers.

This RFI response clarifies that vendors should focus on meeting the PWS requirements rather than matching the specific illustrative models provided. It also confirms the availability of specific model numbers for various laundry and cooking appliances, including ventless dryers, which may be relevant for proposal development.

Form / Attachment / Pricing Sheet

This document is an Excel spreadsheet intended to collect base access information. It appears to be a form required for personnel requiring access to a base.

The spreadsheet contains columns for:

• Last Name
• First Name
• MI (Middle Initial)
• SSN (Social Security Number)
• DOB (Date of Birth)
• Start Date
• End Date
• Destination
• State/DL Number (Driver's License Number)
• State/Tag
• Company/Org

Bidders may need to complete and submit this form for personnel who will require access to a base as part of performing the contract. It is crucial for understanding personnel onboarding and base access requirements.

Form / Attachment / Pricing Sheet

This document, "Attachment 3_Contractor Price Estimate_Revision 2.xlsx", is a pricing estimate spreadsheet. It details the quantities and types of supplies and services required for the opportunity, broken down by CLIN (Contract Line Item Number).

• CLINs: Multiple Contract Line Item Numbers are listed, each corresponding to a specific type of appliance or equipment (e.g., Standard Washers, Vent-less Dryers, Built-In Electric Cook Tops).
• Supplies/Service: Specifies the item being priced, often referencing specific paragraphs in a Performance Work Statement (PWS).
• Quantity: The number of units required for each CLIN.
• Unit: The unit of measure (e.g., Each).
• Unit Price (USD): Placeholder for the price per unit (not provided in the extracted text).
• Total (USD): Placeholder for the total price for the CLIN (not provided in the extracted text).
• Building/Location Specificity: Some CLINs specify requirements for "building 1690".
• Total Quantity: A total of 385 units are listed across all CLINs.

This attachment is crucial for bidders to understand the quantities of specific equipment needed and to formulate their pricing proposals. Bidders will need to fill in the Unit Price and Total columns based on their cost estimations for each CLIN to complete their bid. The document also highlights specific requirements for certain locations (building 1690) and references the PWS for detailed specifications.

Form / Attachment / Pricing Sheet

This document is an RFI (Request for Information) Worksheet titled "FA28602626Q0011 Washer Dryer Cooktop RFI Worksheet". It is designed to collect information from vendors regarding washers, dryers, and cooktops.

The worksheet is structured with columns for "Vendor RFI" and "Government Response". It appears to be a template for vendors to submit their questions or information related to the RFI, and for the government to provide responses.

This worksheet is relevant to potential bidders as it outlines the specific RFI topic (washers, dryers, cooktops) and provides a structured format for submitting RFI responses. Bidders should use this document to formulate and submit their questions or provide relevant information to the government regarding this requirement.

Performance Work Statement (PWS)

This PWS outlines the requirements for leasing, installing, and maintaining contractor-owned washers, dryers, and electric cook tops for Joint Base Andrews (JBA).

• Provide and install new, fully operational washers, dryers, and electric cook tops.

• Perform preventive maintenance to ensure equipment is operational.

• Respond to service calls and repair or replace malfunctioning units.

• Address corrosion control in high moisture areas.

• Maintain service logs and provide accurate reports.

• Appliances must meet specific manufacturer standards and minimum capabilities (e.g., capacity, size, features).

• Service call response within 48-72 hours; operational within 5 business days.

• Unit replacement within 7 business days if repair is not possible.

• Preventive maintenance performed at least twice monthly.

• Accurate reports delivered within 30 days of the following month.

• Lease term: July 1, 2026, to June 30, 2031, with potential extension to December 31, 2031.

• Locations: Various facilities across Joint Base Andrews, MD, as detailed in Appendix A.

• Appliances must be new, fully operational, and free of defects upon installation.

• Specific dimensions and features are required for different appliance types (standard, stackable, ventless, ADA, laundry centers, cook tops).

• Contractor must comply with all security, safety, and base access regulations.

• Federal Criminal History Background Check required for all personnel accessing controlled areas.

• Contractor is responsible for all costs associated with fingerprinting and background checks.

• Government provides access, utilities (electricity, water), and reports malfunctions to the COR.

Amendment / Modification

This document is Amendment 01 to the Combined Synopsis/Solicitation FA286026Q0011. The solicitation issue date has been updated to 14 April 2026, with Amendment 01 issued on 23 April 2026.

• Solicitation Issue Date

• The response deadline is indicated from the SAM.Gov posting. Interested parties must complete a JBA base access request via Attachment #4 and submit to kala.kim@us.af.mil and ryan.lockard@us.af.mil no later than 27 April 2026 at 4:30pm EST. Failure to correctly complete a base access request, or to submit by 27 April 2026, may result in disqualified access to the base.

• Questions and Requests for Information (RFIs) are due by 07 May 2026 at 04:30PM EST and should be emailed to kala.kim@us.af.mil and ryan.lockard@us.af.mil no later than 07 May 2026 at 4:30pm EST.

• Quotes must be submitted via email to the Contract Specialist and Contracting Officer listed no later than the deadline date indicated from the SAM.Gov posting.

• Quotes must be valid for 90 days from solicitation response deadline.

• Pricing requires completion and return of Attachment 3: JBA Washer and Dryer – Pricing Matrix.

• Technical Acceptability requires quotes to meet all specifications without exception and demonstrate a clear understanding of and ability to meet all requirements in the PWS.

Form / Attachment / Pricing Sheet

This document is the U.S. Department of Labor's Wage Determination No. 2015-4281, Revision No. 35, for the Service Contract Act. It establishes the minimum wage rates and fringe benefits required for various occupations performing work under federal contracts in specific geographic areas.

• Geographic Area: District of Columbia, Maryland (Charles and Prince George's Counties), and Virginia (Alexandria, Arlington, Fairfax, Falls Church, Fauquier, Loudoun, Manassas, Manassas Park, Prince William, Stafford).
• Occupational Listings: Provides a comprehensive list of job classifications (e.g., Administrative Support, Automotive Service, Health Occupations, Information Technology) with corresponding minimum hourly wage rates.
• Fringe Benefits: Indicates that fringe benefits are required and follow the occupational listing. Specific details on Health & Welfare, Vacation, and Holidays are provided in subsequent sections.
• Executive Orders: Notes the applicability of Executive Order 13706 (Paid Sick Leave) and Executive Order 13658 (Minimum Wage) for covered contracts.
• Conformance Process: Outlines the procedure for classifying and determining wage rates for occupations not explicitly listed in the determination.

This wage determination is crucial for bidders to accurately estimate labor costs for their proposals. Bidders must ensure their proposed wages and benefits meet or exceed the rates and requirements specified in this document for all covered employees working within the designated geographic areas. Failure to comply can lead to non-compliance with federal contracting regulations.

Statement of Work (SOW) / Performance Work Statement (PWS)

This Performance Work Statement (PWS) outlines the requirements for the contractor to furnish, install, and maintain washers, dryers, and electric cook tops at Joint Base Andrews (JBA).

• Appliance Requirements: Specifies detailed technical requirements for various types of appliances including:

  • Standard Washers (16-pound minimum capacity, Energy Star qualified, non-coin operated)
  • Standard Dryers (14-pound minimum capacity, electric, 7.0 cu. ft. or greater, non-coin operated)
  • Washer/Dryer Laundry Centers (stacked units, specific dimensions)
  • Stackable Dryer/Dryer units
  • Built-in Electric Cook Tops (2- and 4-coil element options)
  • Vent-less Dryers
  • ADA compliant washers/dryers

• Installation: Contractor is responsible for all labor and materials for installation, including new, fully operational, and dent/scratch-free appliances. Installation must adhere to manufacturer specifications and National Electric Code.

• Maintenance: Includes preventive maintenance to ensure system efficiency and corrosion treatment control for units in high moisture areas. Malfunctions and damage are to be reported and addressed.

• Service Call Response: On-site service and repair within 48-72 hours of notification, with units operational within 5 business days. Unit replacement required if repair is not feasible within 7 business days.

• Quality Control: Contractor must develop and maintain a quality program to ensure services meet accepted commercial practices.

• Service Call Response: Appliances operational within 5 business days of notification.

• Preventative Maintenance: No more than three (3) units inoperable in a single month.

• Service Reports: Accurate reports delivered no later than 30 days of the following month.

• Corrosion Treatment: Routine inspection at least twice per month.

• Installation is anticipated to be completed within two (2) weeks after notification of contract award.

• The PWS covers appliances located at various buildings on Joint Base Andrews, Maryland.

• A transition period of 15 days is allocated for the change of work effort, with a specific transition window from June 16, 2026, to July 1, 2026.

• Security: Contractor employees require identification, may be subject to searches, and must undergo a Federal Criminal History Background Check. Weapons and illegal controlled substances are prohibited on base.

• Government Furnished Services: Government will provide electricity, police, fire protection, and emergency medical services.

• Safety: Compliance with applicable Occupational Safety and Health Administration (OSHA) and Air Force Office of Safety and Health (AFOSH) standards is required.

Solicitation / RFP / RFQ

This is a combined synopsis/solicitation for commercial items, issued as a Request for Quotation (RFQ), for the leasing, installation, and maintenance of 387 combined washers, dryers, and electric cooktops at Joint Base Andrews (JBA). The acquisition is 100% set aside for small businesses.

• Provide and install contractor-owned appliances: 70 Standard Washers, 2 Standard Dryers, 35 Vent-less Dryers, 11 Front-load Washers, 3 ADA-Compliant Washers, 52 Washer/Dryer Combo Units, 52 Stackable Dryer/Dryer sets, 4 Stackable Washer/Dryers, 100 Built-in Electric 2-Cook tops, and 60 Built-in 4 Electric Cook-tops.

• Contractor is responsible for providing and maintaining all appliances, personnel, equipment, tools, materials, supervision, and transportation.

• All work must be performed in accordance with the Performance Work Statement (PWS) and applicable rules and procedures.

• Contract Type: Not explicitly stated, but implied to be a fixed-price contract for commercial items.

• Period of Performance: Base Year (1 July 2026 - 30 June 2027) with four (4) option years. Includes FAR 52.217-8 Option to Extend Services for up to six months.

• Estimated Value: Not stated.

• Submission Deadline: Indicated from SAM.Gov posting.

• Site Visit: 23 April 2026 at 0900. Base access request required by 17 April 2026.

• Questions Due: 28 April 2026 at 04:30 PM EST.

• Quotes Due: Via email to Contract Specialist and Contracting Officer by the SAM.Gov posting deadline.

• Quote Validity: 90 days.

• Pricing: Complete and return Attachment 3: JBA Washer and Dryer – Pricing Matrix. Failure to complete will result in quote dismissal.

• Evaluation Criteria: Lowest priced technically acceptable quote. Price and technical factors will be considered. Technical evaluation is on an "Acceptable" or "Unacceptable" basis.

• 100% set aside for small businesses.

• NAICS Code: 532210, with a Small Business Size Standard of $47,000,000.00.

• Funds are available for this effort.

• The Government reserves the right to cancel this solicitation.

• Quoters must utilize Attachment #5: RFI Worksheet for questions.

• Quoters must provide make and model of proposed appliances to meet specifications.

• Attachments include PWS, SCA Wage Determination, Contractor Price Estimate, Base Access Form, and RFI Worksheet.

Form / Attachment / Pricing Sheet

This document is an Excel worksheet titled "FA28602626Q0011 Washer Dryer Cooktop RFI Worksheet". It appears to be a tool for collecting vendor questions (RFI) related to the procurement of washers, dryers, and cooktops, and for recording government responses.

• The worksheet is structured with columns for "Vendor RFI" and "Government Response".
• It is intended to facilitate a Request for Information (RFI) process.

Bidders interested in this opportunity should use this worksheet to formulate and submit their questions regarding the washer, dryer, and cooktop requirements. It serves as a structured method for vendors to seek clarification from the government and for the government to provide official responses, which will be crucial for understanding the full scope and requirements of the opportunity.

Form / Attachment / Pricing Sheet

This document is an Excel spreadsheet titled 'Attachment 4_Base Access Form.xlsx'. It appears to be a form intended for collecting information related to base access.

The spreadsheet contains column headers for the following information:

• Last Name
• First Name
• MI (Middle Initial)
• SSN (Social Security Number)
• DOB (Date of Birth)
• Start Date
• End Date
• Destination
• State/DL Number (Driver's License Number)
• State/Tag
• Company/Org

Bidders may need to complete and submit this form as part of the overall submission requirements for the opportunity. It is likely used to facilitate personnel access to a government base or facility related to the contract performance. Specific instructions on how and when to submit this form would typically be found in the main solicitation document or other related attachments.

Form / Attachment / Pricing Sheet

This document is an Excel spreadsheet titled "Attachment 3_Contractor Price Estimate.xlsx". It appears to be a pricing template or a detailed breakdown of CLINs (Contract Line Item Numbers) for supplies and services related to a Performance Work Statement (PWS).

The spreadsheet contains multiple identical sheets, each detailing CLINs from 0001 to 5009. For each CLIN, it lists:

• Supplies/Service description (referencing specific PWS paragraphs)
• Quantity
• Unit of Measure
• Unit Price (blank)
• Total Price (blank)

The items include various types of washers, dryers, laundry centers, and electric cook tops. A total quantity of 387 units is listed across all CLINs.

Bidders are expected to use this document to provide their price estimates for each CLIN. The quantities and item descriptions are pre-defined, referencing the PWS. Bidders must fill in the 'Unit Price' and 'Total' columns to complete their pricing proposal. This document is crucial for understanding the cost structure of the opportunity and for submitting a compliant bid.

Form / Attachment / Pricing Sheet

This document is the U.S. Department of Labor's Wage Determination No. 2015-4281, Revision No. 35, issued under the Service Contract Act. It establishes the minimum wage rates and benefits required for various occupations performing work on federal contracts within specific geographic areas.

• Geographic Area: District of Columbia, Maryland (Charles, Prince George's counties), and Virginia (Alexandria, Arlington, Fairfax, Falls Church, Fauquier, Loudoun, Manassas, Manassas Park, Prince William, Stafford).
• Occupational Listings: Provides a comprehensive list of occupations with corresponding minimum hourly wage rates.
• Benefits: Specifies required fringe benefits, including Health & Welfare ($5.55/hour or $222.00/week), paid vacation (2-4 weeks based on service), and a minimum of eleven paid holidays per year.
• Executive Orders: Notes applicability of Executive Order 13706 (Paid Sick Leave) and Executive Order 13658 (Minimum Wage), with specific rates and conditions.
• Special Provisions: Includes details on hazardous pay differentials (8% or 4%), uniform allowances, and the process for conforming unlisted classifications.

This wage determination is critical for bidders to accurately estimate labor costs for their proposals. Bidders must ensure their proposed wages and benefits meet or exceed the rates and requirements outlined in this document for all covered employees working on the contract. Failure to comply can lead to non-compliance with the Service Contract Act.