36C25726B0001 | 549-23-601 Upgrade Chillers and Cooling Towers Energy at Energy Center

Amendment / Modification

This amendment (0003) to solicitation 36C25726B0001 extends the proposal receipt date and incorporates updated VAAR clauses related to personnel vetting and credentialing.

• Proposal Due Date: Extended to May 7, 2026, 10:00 CDT.

• VAAR Clauses: Updated to include VAAR Clause 852.204-70 (Personal Identity Verification of Contractor Personnel) with revised language and VAAR Clause 852.204-72 (Personnel Vetting and Credentialing).

• Related Directives/Handbooks: Compliance is required with VA Directive/Handbook 0735 (Homeland Security Presidential Directive 12) and VA Directive/Handbook 0710 (Personnel Vetting Program).

• The deadline for offer submission has been extended.

• Offerors must ensure their personnel comply with the new and revised VAAR clauses regarding personal identity verification, background investigations, and credentialing commensurate with the risk and sensitivity levels defined in the contract.

• The Contractor remains responsible for all contract requirements, and delays in vetting or credentialing will not excuse performance obligations.

Other / Unclassified

This document is an AHERA Asbestos Inspection and Management Plan for Buildings 70, 37, and the Turbine Yard at the VA Medical Center in Dallas, Texas. It details the methodology, laboratory analysis, and material assessment of asbestos-containing materials (ACM) identified during inspections conducted in 2010 and updated in 2014. The plan outlines the scope of work, required information, facility descriptions, and the results of bulk sample analysis.

This document is a technical report detailing the findings of an asbestos inspection and management plan. It is relevant to bidders who may be involved in future renovation, demolition, or maintenance activities at these facilities, as it identifies the presence (or absence) and location of asbestos-containing materials. The report confirms that no asbestos-containing building materials were identified in the inspected areas, which simplifies future work by eliminating the need for specialized asbestos abatement procedures. Bidders should note the dates of the inspections and the recommendation for future re-inspections to ensure ongoing compliance and safety.

Amendment / Modification

This amendment (0002) extends the hour and date for receipt of offers to April 24, 2026, at 10:00 CDT. It also serves to post responses to Request for Information (RFI) questions.

• The deadline for offer receipt has been extended.

• RFI responses are now included.

• Bidders have an extended deadline to submit their offers.

• The RFI responses provide clarifications and additional details that may impact proposal preparation.

Questions & Answers / Clarifications

This document contains responses to vendor questions regarding the "Upgrade Chillers and Cooling Towers" opportunity.

• Refrigerant Monitoring System: A new system is required to match new chillers, as old chillers used R-22. Confirm specific sensor requirements with the chiller manufacturer.
• Building Structure: The building is slab on grade with no basement. Overhead routing for replacement raceways is acceptable.
• VFDs: No exceptions for reusing existing Variable Frequency Drives (VFDs). Verify all electrical motor requirements for new pumps meet or exceed existing VFD ratings. If new VFDs are required, the contractor is responsible for removal, installation, electrical connections, programming, testing, and commissioning.
• Cooling Towers: Work on cooling towers is limited to connecting condenser water piping to new chillers and required controls.
• Commissioning: Commissioning is to be included in the contractor's proposal, not provided by the VA.
• Salvage: The contractor must provide chain of custody documentation showing proper salvage of old equipment.
• Piping & Valves: Existing valves and piping are to remain and be reused unless otherwise specified. The contractor is responsible for verifying existing conditions and providing any necessary valves (manual or motorized) to meet the sequence of operations. Upstream piping and isolation valves are to remain. Only piping modifications required to connect new equipment are included.
• Pneumatic to DDC: All pneumatic valves are to be replaced with DDC to meet latest VA requirements.
• MV Cabling: Existing 5kV medium-voltage (MV) cabling associated with new chiller equipment shall be removed back to its source, and new MV cabling installed to the new chiller VFD/Starter Panel.
• Work Hours: Work can be performed during regular working hours, but shutdowns for tie-ins should be coordinated with the VA. Some work may need to occur during weekends/after hours to minimize impact on patient care.
• BAS Integration: The contractor is responsible for all Building Automation System (BAS) integration, including programming, sequencing, graphics, and cabling for new equipment.
• Tax Exemption: The project is tax-exempt in Texas for materials incorporated into VA real property. Offerors should not include Texas Sales or Use Taxes in their bids.
• Hazardous Materials: Asbestos testing has been completed, and an asbestos report is attached. No abatement is needed.
• Proposal Due Date: The proposal due date is April 17, 2026, at 10:00 AM CST, as updated in amendment 0001.

Several clarifications impact the scope of work, particularly regarding VFDs, BAS integration, MV cabling, and piping/valve reuse. The proposal due date has been confirmed via amendment.

Form / Attachment / Pricing Sheet

This document is a "Safety Pin" form, which serves as a checklist and permit for pre-construction risk assessments (PCRA) and infection control risk assessments (ICRA) for construction, renovation, and maintenance activities at the Dallas VA Medical Center. It outlines required assessments and attachments.

• PCRA (Pre-Construction Risk Assessment): Includes sections for activity type, control measures, and affected adjacent areas. It references specific tables for detailed information.
• ICRA (Infection Control Risk Assessment): Pertains to infection prevention and control measures, categorizing activities and patient risk levels to determine necessary precautions.
• VA CATEX (NEPA): A form for determining the National Environmental Policy Act (NEPA) analysis level, including categorical exclusions.
• ILSM Assessment: An Interim Life Safety Measure assessment to identify and address potential life safety code deficiencies.
• Required Attachments: Lists necessary accompanying documents such as Scope of Work Description, ILSMRA Form (if applicable), Hot Work Permit (if applicable), and SHPO form (if applicable).

This document is crucial for understanding the safety and infection control protocols that will be in place during the project. Bidders need to be aware of the requirements for PCRA, ICRA, ILSM, and any other permits or assessments that may impact the execution of their work. It highlights the need for compliance with stringent safety and infection control standards, which may influence project planning, execution, and cost.

Form / Attachment / Pricing Sheet

This document, "Attachment 2 - 549-23-601 Upgrade Chillers and Cooling Towers - Specs.pdf", contains the specifications for the "Upgrade Chillers and Cooling Towers at Energy Center" project at the VA North Texas Health Care System in Dallas, TX. It is part of the 100% Construction Documents.

The document is primarily a table of contents for the "VHA MASTER SPECIFICATIONS" related to the project. It outlines various divisions and sections of the specifications, including:

• Division 00 - Special Sections: List of Drawing Sheets.
• Division 01 - General Requirements: Covers general intentions, safety, specifications, construction security, document control, operations, and restoration.
• Division 02 - Existing Conditions: Demolition.
• Division 03 - Concrete: Cast-in-place concrete.
• Division 04 - Masonry: Not Used.
• Division 05 - Metals: Not Used.
• Division 06 - Wood, Plastics and Composites: Not Used.
• Division 07 - Thermal and Moisture Protection: Firestopping, Joint Sealants.
• Division 08 - Openings: Not Used.
• Division 09 - Finishes: Painting.
• Division 10 - Special Construction: Seismic Restraint Requirements for Non-Structural Components.
• Division 23 - Heating, Ventilating, and Air Conditioning (HVAC): Common Work Results for HVAC, Noise and Vibration Control, Testing Adjusting and Balancing, HVAC and Boiler Plant Insulation, Commissioning of HVAC Systems, Direct-Digital Control System for HVAC.
• Division 26 - Electrical: Requirements for Electrical Installations, Medium-Voltage Cables, Pad-Mounted Liquid-Filled Medium-Voltage Transformers, Medium-Voltage Circuit Breaker Switchgear, Medium-Voltage Fusible Interrupter Switches, Low-Voltage Electrical Power Conductors and Cables, Grounding and Bonding for Electrical Systems, Raceway and Boxes for Electrical Systems, Underground Electrical Construction, Secondary Unit Substations, Motor Control Centers, Motor Controllers.
• Division 33 - Water Utilities: Hydronic Piping, Hydronic Pumps.

This document serves as a detailed index of the technical specifications for the project. Bidders should review this table of contents to understand the scope of work covered by the various specification sections, particularly those related to HVAC, electrical, concrete, and firestopping, to ensure they are addressing all requirements in their proposals. It provides a roadmap to the detailed technical requirements for the "Upgrade Chillers & Cooling Tower at Energy Center" project.

Form / Attachment / Pricing Sheet

This document contains the "100% Construction Documents" for the "Upgrade Chillers & Cooling Towers at Energy Center (Bldg. 70)" project, VA Project Number: 549-23-601. It includes a comprehensive set of architectural, structural, mechanical, and electrical drawings.

• Cover Sheet (G1000): Project overview, location, and consultant information.
• General Information (G1001): Abbreviations, codes, standards, and executive orders.
• Phasing Plan (G1002): Details the four phases of the chiller and cooling tower upgrade.
• Structural Drawings (SA001, SA010, SB101, SB301): General notes, special inspections, foundation plans, and details.
• Architectural Drawings (AS001, A-100, AD101, AE101): Site plan, overall floor plan, demolition plan, and reference plan for Building 70.
• Mechanical Drawings (M-000, M-101, M-201, M-401, M-501, M-701, M-702, M-703): Legends, demolition plans, renovation plans, enlarged plans, details, schedules, controls, and P&ID diagrams for the HVAC systems.
• Electrical Drawings (E-001, ED201, E-201, ED601, E-601, E-602): Legends, demolition plans, floor plans, and one-line diagrams for the electrical systems.

This document set provides the detailed technical specifications and design plans required for bidding on the "Upgrade Chillers & Cooling Towers at Energy Center (Bldg. 70)" project. It outlines the scope of work, existing conditions, proposed upgrades, and all relevant technical requirements for mechanical, electrical, structural, and architectural aspects of the project.

Solicitation / RFP / RFQ

This solicitation is for the "Project 549-23-601 Upgrade Chillers & Cooling Towers at Energy Center" at the Dallas VA Medical Center. The contractor will be responsible for providing all labor, supervision, materials, and equipment to complete the project.

• Site investigation for selective demolition, civil, mechanical, electrical work, grading, excavation, layout planning, and construction.

• Phased removal and replacement of four (4) existing 1,000 ton chillers with new ones.

• Installation of auxiliary components, including pumps, controls, and electrical distribution.

• Equipment commissioning.

• Coordination with the Government for salvaging and storage of removed parts.

• Adherence to applicable laws, regulations, policies, and specifications.

• Environmental/Occupational Safety and Health (EOSH) requirements.

• Professional appearance and qualified personnel.

• Contract Type: Firm-Fixed-Price.

• Period of Performance: 548 calendar days after notice to proceed.

• Estimated Value: NAICS 238220, PSC Y1DA. Construction Magnitude: Between $2,000,000 and $5,000,000.

• Performance and Payment Bonds are required.

• Site Visit: March 24, 2026, at 10:00 AM CST at Dallas VA Medical Center.

• RFIs Due: March 30, 2026, by 10:00 AM CST.

• Proposals Due: April 17, 2026, by 10:00 AM CST.

• Submission Method: Electronic PDF via email to specified addresses.

• Evaluation: Award will be made to the lowest responsible bidder whose bid conforms to the solicitation and is deemed most advantageous to the Government, considering price and price-related factors.

• This solicitation is 100% Service-Disabled Veteran Owned Small Business (SDVOSB) set-aside.

• Offerors must provide evidence of SDVOSB status.

• Bidders must acknowledge all amendments.

• A Bid Bond is required.

• Offerors must complete all bid items and adhere to submission instructions to avoid non-responsiveness.