6515--NX EQ Lifts: Patient Transfer: Floor Based: Bariatric
Overview
Buyer
Place of Performance
NAICS
PSC
Set Aside
Original Source
Timeline
Qualification Details
Fit reasons
- NAICS alignment with historical contract wins in similar service areas.
- Scope strongly matches core technical capabilities and delivery model.
Risks
- Past performance thresholds may require one additional teaming partner.
- Potential clarification needed on staffing minimums before bid/no-bid.
Next steps
Validate eligibility requirements, assign capture owner, and schedule partner outreach to confirm teaming strategy before submission planning.
DESCRIPTION
The Veterans Health Administration (VHA) Non-Expendable Equipment National Program has identified the NX EQ Lifts: Patient Transfer: Floor Based: Bariatric product line as a candidate for an Enterprise-wide (otherwise referred to as national ) single Requirements contract award.
The Department of Veterans Affairs (VA) Office of Procurement, Acquisition and Logistics (OPAL) Strategic Acquisition Center (SAC) on behalf of VHA is issuing this Sources Sought Notice to determine the availability and technical capabilities of qualified sources.
The SAC in conjunction with VHA is seeking a qualified source to provide EZ Way brand name or equal Lifts: Patient Transfer: Floor Based: Bariatric product on an agency wide basis. VA intends to award a Requirements Contract with Firm-Fixed Price (FFP) orders in accordance with FAR 16.503, to a supplier of this equipment. Vendors will be required to deliver Lifts: Patient Transfer: Floor Based: Bariatric to VA medical centers and facilities throughout the United States and its territories.
The anticipated period of performance is for one (1) 12-month base period with four (4) 12-month option periods from the date of award. However, the Government's decision as to whether or not to continue with the contract, upon annual review, will be based upon successful performance during each previous year and continued need. The Contractor must demonstrate the ability to meet all requirements for the solicitation.
The associated North American Industrial Classification System (NAICS) code for this procurement is 339113 Surgical Appliance and Supplies Manufacturing and the associated size standard is 800 employees. The FAR Provision found at 52.204-7 requires that All interested Offerors must be registered in SAM prior to submitting an offer or proposal. You may access the SAM website at Home | SAM.gov. All offerors must be certified with the appropriate NAICS code on the SAM website. All SDVOSB/VOSB offerors must be verified in the Small Business Administration (SBA) database at Veteran Small Business Certification (VetCert) database at: Veteran Small Business Certification (sba.gov) at the time of proposal submission.
This notice is for planning purposes only and does not constitute a commitment on the part of the Government to award a contract, nor does the Government intend to pay for any information submitted as a result of this notice. This Sources Sought Notice is part of a continuous process for obtaining the latest information on the commercial status of the industry with respect to their current and near-term abilities. The information provided herein is subject to change and in no way binds the Government to solicit for, or award, a competitive contract. It is emphasized that this is a notice solely for planning and informational purposes.
2.0 SCOPE
Lifts: Patient Transfer: Floor Based: Bariatric are designed for hoisting and transferring a patient safely and with minimal physical effort up to 1000 lbs. These lifts consist of a C-shaped or U-shaped support base usually including casters, a vertical mast, a pivoting boom, a swivel bar, a hanger bar or spreader bar with hook to accommodate clip-based slings, and the, lifting mechanisms; they are manually, electrically, or battery operated using hydraulic or screw jack lifting mechanisms. Patient lifts are frequently used to transfer patients (e.g., to and from a wheelchair, toilet, or bathtub), reducing the risk of injury to those assisting with the transfer (typically only one person) and of patient drop.
The following Contract Line Items are being considered:
Contract Line Item#
Brand
Part Number
Description
Base Period
Option Period I
Option Period II
Option Period III
Option Period IV
0001
EZ Way
L1000PN-02
1,000 lb. Smart Lift without scale with 2-inch casters (Upgrade)
3
3
3
3
3
0002
EZ Way
L1000PN-03
1,000 lb. Smart Lift without scale with 3-inch casters (Standard)
3
3
3
3
3
0003
EZ Way
L1000PS-02
 1,000 lb. Smart Lift with scale with 2-inch casters (Upgrade)
13
13
13
13
13
0004
EZ Way
L1000PS-03
1,000 lb. Smart Lift with scale with 3 inch casters (Standard
24
24
24
24
24
0005
EZ Way
500406
Deluxe Sling Wipeable XXXXL
13
13
13
13
13
0006
EZ Way
500405
Deluxe Sling Wipeable XXXL
13
13
13
13
13
0007
EZ Way
500412
Deluxe Sling Wipeable XXXL with Head Support
13
13
13
13
13
0008
EZ Way
500274
Deluxe Sling Mesh XXXL with Head Support
13
13
13
13
13
0009
EZ Way
500142
Deluxe Sling XXXL
13
13
13
13
13
0010
EZ Way
500629
Deluxe Sling Antimicrobial XXXL
13
13
13
13
13
0011
EZ Way
500630
Deluxe Sling Antimicrobial XXXXL
13
13
13
13
13
0012
EZ Way
500636
Deluxe Sling Antimicrobial XXXL with Head Support
13
13
13
13
13
0013
EZ Way
500914
Deluxe Sling XXXXL
13
13
13
13
13
0014
EZ Way
50325
Deluxe Sling XXXL with Head Support
13
13
13
13
13
0015
EZ Way
50701
Accessory Bag - Bariatric
13
13
13
13
13
0016
EZ Way
500232
Multi-Purpose Sling XXXL
13
13
13
13
13
0017
EZ Way
500418
Multi-Purpose Sling Wipeable XXXL
13
13
13
13
13
0018
EZ Way
500446
Limb Lifting & Turning Strap Kit Wipeable XL (includes 2 Wipeable Straps with 2 Carabiners)
13
13
13
13
13
0019
EZ Way
500463
Walking Harness XXL
13
13
13
13
13
0020
EZ Way
500384
Gait Training Sling XXL
13
13
13
13
13
0021
EZ Way
500944
Bi-Directional Turning Sling (Twin Turner) Bariatric
13
13
13
13
13
0022
EZ Way
500193
Hip Sling XXXL
13
13
13
13
13
0023
EZ Way
500325
Repositioning & Turning Sheet Black Spacer for Low Air Loss Beds & Skin Integrity 42"W x 75"L
13
13
13
13
13
The VA is seeking vendors who can provide EZ Way Lifts: Patient Transfer: Floor Based: Bariatric or equal as listed above which meet all the following salient characteristics (SC):
CLINs 0001-0004 apply to SCs 1-12. CLINs 0005-0023 apply to the SC 13.
SC #
SALIENT CHARACTERISTICS
METHOD OF EVALUATION
SC 1
Lift must be able to roll within a room while simultaneously suspending the patient. Must be able to take a patient to a toilet in an adjoining room.
Literature Review
SC 2
Lifting range that allows floor rescue and ambulation of patients, with Spreader bar that can reach 26.5 inches from the floor or lower and reach at least 65.5 inches or higher.
Literature Review
SC3
Leg clearance of 4.5 inches from the floor or lower.
Literature Review
SC 4
Lift options must be available with or without scale.
Literature Review
SC 5
Lift weight capacity that accommodates patients weighing up to 1000lbs.
Literature Review
SC 6
Lifting must be motorized using battery power.
Literature Review
SC 7
Vendors shall provide verification that Lifts and Slings are compliant with ISO 10535.
Literature Review
SC 8
Lift must provide emergency stop and manual emergency lowering.
Literature Review
SC 9
Emergency stop must not allow descent of a load unless emergency lowering controls are activated.
Literature Review
SC 10
Lift must demonstrate Max exterior width with legs closed 34.5 inches.
Literature Review
SC 11
Lift must be allowed to be used with ambulation slings.
Literature Review
SC 12
Lift must be allowed to be used with repositioning slings.
Literature Review
SC 13
Slings are available in sizes accommodating patients who weigh up to 1000 pounds.
Literature Review
3.0 SUB-FACTORS
Safety
All features and functions of the offered device will be evaluated for the ability to safely lift, evacuate, and transfer patients. Areas include but are not limited to the following:
Safety and transferring patients
Ease of lift base widening/narrowing at maximum capacity (such as stated force to use a lever at maximum capacity, or electrical widening/narrowing at maximum capacity)
Emergency lowering without tools
Scale display location at or near caregiver eye level, preventing having to reach over, above, or around a patient to read the measurement.
Ability to be disinfected using hospital approved disinfectants/cleaners and directions
Design
All design features and functions of the offered device will be evaluated. Areas include but are not limited to the following:
Patient weight capacity
Provide disposable, wipeable, and washable slings or allow use of other manufacturers slings
Availability of extra or optional features such as (sling styles, compatibility with other manufacturers loop-based slings, sling sizes, spare battery and remote wall charger)
Location and ease of use of features
Extra wheel height options
Legs adjust to wider interior width to accommodate bariatric equipment
Narrower total external width with legs closed
Loop-based hanger bar convertible between 2-point and 4-point
Disposable slings available
Whether scale lowers max lifting height below requirements
Is the scale internal or external
Scale option with capacity equal to the lift
Performance
Device will be evaluated for its ability to perform its intended function. Areas include but are not limited to:
Lifting/Weight capacity of device
Portability and Maneuverability of device
Ease of lift base widening/narrowing
Ease of transferring patients
Longevity of battery
Higher battery capacity and/or number of lifts at maximum weight on a fully charged battery
Quality/Construction
All aspects of the construction and quality of material of the device will be evaluated including but not limited to:
Required frequency of maintenance and replacement of parts
Service/Support Options
Training Options
Life Span/warranty
Buy American Act/Trade Agreement Act Compliant (TBD)
For each product (brand name and part number), the response must include descriptive literature demonstrating the product meets or exceeds the SCs specified above.
The Government's intent is to include all ancillary items to ensure the equipment can function as designed by the Original Equipment Manufacturer (OEM) and as clinically required. Vendors are encouraged to provide any product solution or configuration so long as they meet the SCs. Additionally, responses can include any additional product that may be beneficial. These items must be clearly identified by brand name and part number.
Responses to this Sources Sought Notice shall include the following:
Does vendor offer an annual service plan, Yes or No?
If Yes:
What does the plan cover?
Does plan cover software updates only?
Does the plan cover parts repair or replacement only?
Does the plan cover both software and parts?
If applicable, vendors are requested to provide documentation that shows information on their service plan.
Is the service provided by the OEM or a subcontractor?
Full name and address of company
SAM Unique Entity Identifier (UEI) / CAGE Code
Business Size
Manufacturer or Distributor
If the distributor, provide manufacturer s full name, business size and address.
Country of Origin designation for all products.
Ability to provide uninterrupted supply of products on a national scale.
Technical Literature that clearly shows product(s) meet the identified salient characteristics and page numbers where each salient characteristic is met.
Any additional product solution or configuration that would be beneficial to the clinical functionality of the product line identified.
Authorized Distributor Letter Certified by OEM with a current date.
Although not required, vendors responding to this Sources Sought may also submit a Capabilities Statement.