6973GH-26-Q-00071- Refurbish, repair, paint Ext. Maint. Bldg. TKO VOR in Mankato, KS

Solicitation / RFP / RFQ

This document outlines the specifications for the refurbishment of the EIFS (Exterior Insulation and Finishing System) siding on the TKO VOR building located in Mankato, KS. The Federal Aviation Administration (FAA) is procuring these services.

• Repair approximately 6 holes in the EIFS siding by replacing damaged underlying insulation and recoating.

• Replace damaged corner track.

• Re-attach loose wall-mounted A/C disconnects.

• Remove and replace existing sealant around wall-mounted boxes/conduit and other openings.

• Frame in and install new EIFS siding in an opening left by a removed aluminum vent fan.

• Clean and prep the entire EIFS surface and apply an elastomeric coating.

• Scrape and repaint the concrete foundation.

• Prep and paint 5 vent hoods and other previously painted surfaces/panels/conduits.

• Install wood support framing and vinyl soffit under the roof overhang.

• Prep and paint propane tank bollards.

• Clean and restore the site to its original condition upon completion.

• The work requires a long-term facility outage for the VOR, which must be requested at least 30 days in advance.

• Work hours are scheduled for a 40-hour work week, with potential for overtime if approved and funded by the FAA.

• Prospective bidders are strongly recommended to perform a site inspection prior to bid submission.

• Site access and storage space are limited and will be coordinated by the Contracting Officer (CO) or Contracting Officer's Representative (COR).

• Sanitary facilities and water are not available on-site; the contractor must provide these.

• Electrical power will be available from the facility, but the contractor is responsible for extension cords.

• Not specified in the provided document excerpt.

• All communications, authorizations, and approvals must be through the Contracting Officer (CO).

• A COR may be assigned to oversee the project.

• Drawings CE-D-TKO-4876 (VORTAC FACILITY SITE) are included as part of the contract documents.

Form / Attachment / Pricing Sheet

This document contains detailed engineering drawings and site plans for the VORTAC facility site in Mankato, Kansas. It serves as a critical reference for understanding the physical layout, topography, and infrastructure of the site.

• Site Layout: Depicts the location of the VORTAC facility, access roads, fences, gates, and surrounding land use (cropland, pasture).
• Topography and Profile: Includes contour lines, ground elevation data, and a profile view showing ground elevation along a specific transect.
• Infrastructure Details: Shows the placement and specifications of various components such as antenna poles, transformer pads, propane tanks, underground cables (TELCO, power), water tanks, septic tanks, and culverts (CM.P.).
• Grounding System: Details the counterpoise grounding system, ground rods, and copper grounding wires.
• Boring Log: Provides information on soil conditions at the site.
• Vicinity Map: Shows the general location of the facility relative to Mankato, Kansas.
• Reference Drawings: Lists related drawings for further technical details.
• Revision History: Documents changes and modifications made to the drawings over time.

This drawing is essential for bidders to visualize the physical environment of the VORTAC site. It provides critical information regarding site access, existing infrastructure, terrain, and the specific locations of key components that may be relevant for any construction, maintenance, or operational activities associated with the opportunity. Understanding these details is crucial for accurate bidding and project planning.

Other / Unclassified

This document is a General Decision Number (KS20260044) for building construction projects in various counties across Kansas. It specifies prevailing wage rates and fringe benefits for different construction trades, including:

• Asbestos Worker/Heat & Frost Insulator
• Bricklayer
• Elevator Mechanic
• Ironworker, Reinforcing
• Painter (Brush and Roller)
• Pipefitter (Excludes HVAC Pipe and Unit Installation)
• Pipefitter (HVAC Pipe Installation Only)
• Sprinkler Fitter (Fire Sprinkler)
• Sheet Metal Worker (Excludes HVAC Duct and Unit Installation)
• Electrician (HVAC/Temperature Controls Installation Only)
• Carpenter (Drywall Hanging Only)
• Carpenter (Excludes Drywall Hanging, and Form Work)
• Cement Mason/Concrete Finisher
• Electrician (Excludes Installation of HVAC/Temperature Controls)
• Form Worker
• Glazier
• Ironworker, Structural
• Laborer: Common or General
• Metal Building Erector
• Operator: Backhoe/Excavator/Trackhoe
• Plumber (Excludes HVAC Pipe and Unit Installation)
• Roofer
• Sheet Metal Worker (HVAC Duct Installation Only)
• Sheet Metal Worker (HVAC Unit Installation Only)
• Welders (Receive rate prescribed for craft performing operation to which welding is incidental)

The document also includes notes regarding Executive Order (EO) 13706 (Establishing Paid Sick Leave for Federal Contractors) and Executive Order 13658 (Federal Minimum Wage for Federal Contractors), outlining requirements for applicable contracts awarded on or after specific dates.

This document is relevant to bidders as it establishes the minimum prevailing wage rates and fringe benefits that must be paid to laborers and mechanics employed on construction projects covered by the Davis-Bacon Act in the specified Kansas counties. Contractors must ensure their bids and proposed labor costs comply with these wage determinations.

Solicitation / RFP / RFQ

This solicitation is for the refurbishment, repair, and painting of the TKO VOR equipment building located in Mankato, KS. The acquisition is set aside for Total Small Business.

• Refurbishment, repair, and painting of the TKO VOR equipment building.

• Contractor is responsible for furnishing all materials, equipment, labor, transportation, insurance, permits, and supervision.

• Work must be performed in accordance with applicable drawings, specifications, and contract conditions.

• Estimated price range: $40,000 - $100,000.

• Contract type: Firm-fixed-price.

• Performance period: 15 calendar days to begin performance after notice to proceed, and 45 calendar days to complete the work.

• Proposals are due by April 8, 2026, at 5:00 pm CST.

• Award will be made to the responsible, responsive offeror with the lowest-priced proposal.

• Evaluation will consider past performance, key personnel, technical proposals, and cost/price.

• This acquisition is set aside for Total Small Business.

• The solicitation includes technical specifications (10 pages), drawings (1 page), and a wage determination (6 pages).

• Offerors must acknowledge any amendments on page 2 of the solicitation.

• A site visit is encouraged, with advance notice required.