Airshow 2026 Tents, Tables, Chairs Rental

Solicitation / RFP / RFQ

This document is a combined synopsis/solicitation for commercial products and services, issued as a Request for Quotation (RFQ) in accordance with FAR Part 12. It constitutes the only solicitation, and a separate written solicitation will not be issued. The government is procuring rental services for tents, tables, and chairs.

• Rental of various sizes of Keder Canopies, Standard Canopies, Round Tables, Rectangle Tables, and White Folding Chairs.

• Associated items include Concrete Blocks, Straps, Fire Safety Package, Tent Sidewalls, White Picket Fencing, and Steel Barricade/Bike Fencing.

• Specific quantities and sizes are detailed in the Bid Schedule/Contract Line Items (CLINs).

• Performance Period: Begins May 16, 2026. Delivery and setup by 12:00 PM on May 16, 2026. Onsite support available May 16-17, 2026. Teardown begins after 5:00 PM on May 17, 2026, with all equipment removed by 8:00 AM on May 18, 2026.

• Contract Type: Firm Fixed-Price.

• Period of Performance: Starts May 16, 2026, with specific delivery, setup, support, and teardown dates.

• Estimated Value: Not explicitly stated, but the NAICS code (532289) and PSC (W099) are provided.

• Quotes are due by 10:00 AM Local Time (MST) on April 2, 2026.

• Quotes must be submitted via email to the addresses provided on page one, with RFQ# FA489726QC039 in the subject line.

• Technical proposals shall not exceed 10 pages.

• All solicitation amendments must be acknowledged or signed and returned.

• Past performance data submitted will not be evaluated if it exceeds 3 years.

• Evaluation Factors: Technical Capability, Price, and Past Performance. Award will be made to the responsible offeror whose offer is most advantageous to the Government, considering these factors. Technical Capability and Past Performance are evaluated on a pass/fail basis.

• This is a 100% Total Small Business Set-aside.

• NAICS Code: 532289 - All Other Consumer Goods Rental.

• Small Business Size Standard: $12.5 Million Dollars.

• The document incorporates provisions and clauses by reference, accessible at www.acquisition.gov.

• Offerors must be registered in the System for Award Management (SAM).

• Payment Terms: NET 30, FOB Destination.

Statement of Work (SOW) / Performance Work Statement (PWS)

To provide rental of tents, tables, chairs, and associated equipment to support the Gunfighter Skies 2026 Open House at Mountain Home AFB, Idaho.

• Furnish, deliver, and remove canopy tents, tables, chairs, and various fencing with associated grounding equipment.

• All work must comply with the PWS, federal, state, and local laws, regulations, manufacturer's specifications, and commercial practices.

• The government reserves the right to add, remove, or modify quantities of work.

• Delivery and setup of tents: No later than 12:00 PM on Friday, May 16, 2026.

• Technician available: 7:00 AM to 6:00 PM on Saturday, May 16, 2026, through Sunday, May 17, 2026.

• Teardown begins: After 5:00 PM on Sunday, May 17, 2026.

• All equipment removed: Before 8:00 AM on Monday, May 18, 2026.

• Location: Mountain Home AFB, Idaho.

• One (1) 40' x 80' Keder Canopy

• One (1) 40' x 40' Keder Canopy

• Seven (7) 10' x 20' Standard Canopies

• Seven (7) 10' x 10' Standard Canopies

• Seventy (70) concrete blocks (20" x 20" x 12")

• Ninety-eight (98) straps (1" x 15')

• Twenty (20) concrete blocks (40" x 24" x 30")

• Twenty (20) straps (2" x 12')

• Fire safety package for tents

• Fourteen (14) tent sidewalls (8' x 20')

• Twenty-eight (28) white picket fencing (7' x 32')

• Three hundred twenty-five (325) steal barricade/bike fencing (8' x 42')

• Snow fencing (1400' long by 4' tall)

• Fifty (50) round tables (5')

• Twelve (12) rectangle tables (8' x 30")

• Seventy-five (75) rectangle tables (10'x 30")

• Five hundred fifty (550) white folding chairs

• Increase canopy (40' x 40') to two (2) with strapping and blocks.

• Increase rectangle tables (8' x 30”) to twenty (20).

• Increase round tables (5') to sixty (60).

• Increase white folding chairs to one thousand (1050).

• All equipment must be in working order, free of damages, stains, or tears.

• Government will inspect all delivered equipment for fitment, appearance, and usability.

• Government reserves the right to reject any equipment not meeting standards.

• Hazardous Material Inventory and Safety Data Sheets (SDS) are required.

• Contractor must follow manufacturer's guidelines for material storage and use.

• Procedures for notification of environmental spills must be followed.

• Waste must be handled and disposed of in accordance with federal, state, and local regulations.

• Historic preservation coordination is required.

• Contractor personnel must meet security requirements, including training, background checks, and base access procedures.

• Antiterrorism (AT) Awareness Training is required for personnel with routine physical access.

• Contractor employees are prohibited from possessing weapons, firearms, or ammunition on installation.

• The Government does not provide deposits.

• Payment will be a single lump sum within 30 days of receipt of a valid invoice, satisfactory material inspection, and a completed receiving report.

• In case of postponement, abandonment, or cancellation due to circumstances outside of either party's control, neither party is liable for expenses incurred.

• If the Contractor has incurred costs at the time of cancellation, compensation will be commensurate with work performed, supported by substantiating documents.

• Negligence, equipment failure, sickness, or loss of employees do not constitute conditions outside of control.

• If the Contractor is on-site and ready to perform but cannot due to circumstances outside their control, they will be paid 100% of the performance fee.

• Failure to perform for reasons other than those stated above will result in no compensation.

• Contractor shall not employ persons with a conflict of interest, including government employees or former military personnel with less than honorable discharge.

• Air Force airshows are free to the public; the contractor shall not solicit donations.

• The contractor may not display or charge admission fees for tours or displays.

Wage Determination

This document is a U.S. Department of Labor, Wage and Hour Division "Register of Wage Determinations Under the Service Contract Act." It establishes minimum wage rates and fringe benefits for various occupations in specific geographic areas. This particular determination (No. 2015-5513, Revision No. 27) applies to Idaho Counties of Adams, Elmore, Payette, Valley, and Washington.

• Applicability: This wage determination must be incorporated into any contract awarded under the Service Contract Act for services performed in the specified Idaho counties.
• Occupational Listings: The document lists numerous occupations with corresponding hourly wage rates. These include administrative, clerical, automotive, food service, health, information technology, maintenance, protective service, and transportation occupations, among others.
• Fringe Benefits: A section details required fringe benefits, including Health & Welfare ($5.55 per hour or $222.00 per week) and specific provisions related to Executive Orders (EO) 13706 (Paid Sick Leave) and EO 13658 (Minimum Wage).
• Executive Orders:
  • EO 13706 (Paid Sick Leave): Contractors must provide 1 hour of paid sick leave for every 30 hours worked, up to 56 hours per year, for contracts awarded on or after January 1, 2017.
  • EO 13658 (Minimum Wage): For contracts awarded between January 1, 2015, and January 29, 2022 (and not renewed/extended after Jan 30, 2022), covered workers must be paid at least $13.30 per hour (or the applicable wage rate on this determination, if higher) for work performed in 2025. This rate is adjusted annually.
• Hazardous Pay: Specific differentials (8% or 4%) apply to positions involving hazardous materials or ordnance.
• Uniform Allowance: Contractors must furnish uniforms or reimburse employees for their cost and maintenance ($3.35 per week, unless "wash and wear" materials are used).
• Conformance Process: If a required service employee classification is not listed, contractors must follow a specific process (SF-1444) to request an additional classification and wage rate from the Department of Labor.

This document is critical for understanding the minimum labor costs associated with performing services under a contract in the specified geographic area. Bidders must ensure their proposed wages and benefits meet or exceed these requirements to be compliant.