B-52 Landing Gear Drag Link

Form / Attachment / Pricing Sheet

This document outlines the Manufacturing Qualification Requirements for the Outboard Tripod Link (NSN: 1620-00-620-7642, P/N: 5-36035), used in the B-52 weapon system. It details the criteria and processes potential sources must satisfy to become a qualified supplier.

• Qualification Requirements: Potential offerers must notify the Government of their intent to qualify and submit a Source Approval Request (SAR) package. This includes demonstrating capabilities in manufacturing, testing, inspection, packaging, and storage.
• Data Verification: Offerers must possess and verify the completeness of the Government-approved Technical Data Package (TDP).
• Manufacture/Process Verification: The item must be manufactured to conform to the TDP, including Unique Identification (UID) requirements. Offerers must provide data showing compliance with quality, performance, and environmental evaluations.
• Test and Evaluation: Offerers must, at their own expense, prepare and submit a qualification test plan/procedure for Government approval and then submit a complete test report. The Government reserves the right to inspect testing processes.
• Qualification Article Verification: Offerers may need to provide a pre-contract award qualification article for evaluation or submit a waiver. Successful qualification testing does not guarantee contract award.
• Source Qualification Waiver Criteria (QWC): Specific criteria are provided for potential waivers of qualification requirements, including prior supply to Government/OEM, qualification for assemblies/sub-assemblies, qualification for similar items, or previous qualification of the item.

This document is critical for any bidder intending to supply the Outboard Tripod Link. It outlines the mandatory steps, costs (estimated $2,600.00 for testing/evaluation), and timelines (estimated 365 days for completion) required to become a qualified source. Bidders must demonstrate full qualification before contract award. The document also details options for waivers, which may streamline the qualification process under specific circumstances.

Solicitation / RFP / RFQ

This solicitation is for the "Other Aircraft Part and Auxiliary Equipment Manufacturing" and is a 100% Small Business Set-Aside. The acquisition is restricted to qualified sources: Machine Specialties (CAGE 1DDX0) and Arlington Precision Components (CAGE 1DDX0).

• The requirement is for a total purchase quantity of 39 EA.

• Bidders can bid in two ways:

  • Bid A: First Article (FA) + 38 EA production articles.
  • Bid B: FA waiver + 39 EA production articles.

• The item is identified by NSN: 1620-00-620-7642, B-52 DRAG LINK, LANDING G.

• The material is Metal-Aluminum.

• The manufacturer part number is 5-36035-3.

• Associated Document(s): FD20202600453.

• IUID Required: Yes.

• Physical Item Markings: IAW MIL-STD-130.

• Serial Number Required.

• Quality Assurance: Higher Level Contract Quality Requirements, AS9100.

• Contract type is not explicitly stated, but pricing is "Firm Fixed Price" for line items.

• Period of Performance: Not explicitly stated, but delivery is noted as "*ARO Contract" and "*365 Calendar Days" for First Article and "*14 Months" for production articles.

• Estimated Value: Not stated.

• Proposal or quote submission deadline: 11-MAY-2026 2:00PM.

• Evaluation criteria: Price or Cost is the primary factor (Order of Importance 01). Other factors are combined and evaluated as a whole.

• First Article Evaluation Cost: $2,000.00.

• This acquisition is 100% set aside for Small Business Participation Only.

• Restricted to qualified sources: Machine Specialties (CAGE 1DDX0) and Arlington Precision Components (CAGE 1DDX0).

• Less than a truckload shipment is acceptable and authorized.

• Early and partial deliveries are acceptable at no increase in cost to the Government.

• On Time Delivery Improvement initiative is in effect.

• Packaging and Marking requirements are detailed, including MIL-STD-130 and MIL-STD-129.

• Wide Area Workflow (WAWF) is required for payment requests and receiving reports.

Form / Attachment / Pricing Sheet

This document is a Contract Data Requirements List (CDRL) for the "First Article" item, specifically for "Test/Inspection Reports" and "Government Testing." It outlines the data and reports the contractor is required to submit to the government.

• Data Item Number: A001

• Title of Data Item: Test/Inspection Reports

• Subtitle: Government Testing

• Authority: DI-NDTI-80809B

• DD 250 Required: SD (Source Data)

• Frequency: Per contract reqs

• Submission: To be submitted concurrently with the FIRST ARTICLE item.

• FOB/Inspection/Acceptance: Destination

• Block 4 (Remarks): Clarifies that contractor format is acceptable for the test/inspection reports. Specific requirements include listing dimensions and tolerances, identifying materials and processes used in manufacturing the First Article, and providing copies of purchase orders for processes performed by subcontractors. Other requirements are detailed in the Technical Data Package.

• Block 9: Distribution is authorized to U.S. Government Agencies for test and evaluation purposes until March 1, 2024. Other requests should be directed to 417 SCMS.

• Blocks 10, 11, 12, and 13: The report to assist in First Article testing by the Government must be submitted with the First Article item and included in the First Article asset container.

This CDRL details the specific testing and reporting requirements for the "First Article" of the procurement. Bidders need to understand these requirements to accurately estimate costs, plan their testing procedures, and ensure compliance with government expectations for the initial production item.

Form / Attachment / Pricing Sheet

This document is a Special Packaging Instruction (SPI) for the "DRAG LINK, LANDING GEAR" (Part/Drawing No. 5-36035-3, NSN 1620-00-620-7642). It details the specific requirements for preserving, packing, marking, and containerizing this item for shipment.

• Preservation: Specifies MIL-STD-2073 for military preservation, MIL-PRF-16173 Code 02 for preservative, and cleaning/drying IAW MIL-STD-2073.
• Packing: Outlines packing methods based on MIL-STD-2073, including specific requirements for Level A and Level B packaging, cushioning, barrier wrap, and filament tape.
• Marking: Requires marking IAW MIL-STD-129, including the SPI number (F00-620-7642) and a "DO NOT DESTROY" instruction for reusable containers.
• Container Dimensions & Weight: Provides specific interior and exterior dimensions for Level A and Level B containers, as well as gross cube, gross weight, and design fragility.
• International Standards: Addresses requirements for wood packaging material (WPM) in compliance with ISPM No. 15, mandating heat-treated and debarked wood for international shipments.
• Revisions: Revision B updated dimensions and format, and added a distribution statement and destruction notice.

This document is critical for any bidder needing to understand the exact packaging, preservation, and marking requirements for the "DRAG LINK, LANDING GEAR." Adherence to these specifications is essential for successful contract fulfillment and shipment.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the "Preservation, Packaging & Marking Requirements" for an unspecified contract, effective March 2025. It details the standards and practices offerors must adhere to for packaging and marking materials.

• Adherence to AFMC Form 158, "Packing Requirements," and various Department of Defense (DoD) Military Standards, ASTM International, and ANSI standards.

• Use of MIL-STD-2073-1 for military packaging development, including special packaging instructions and hazardous material requirements.

• Application of ASTM D3951 for commercial packaging of specific commodities.

• Compliance with MIL-STD-129 for military marking, labeling, and shipment planning, including the use of DD Form 1574 or 1574-1 tags.

• Adherence to International Standards for Phytosanitary Measures (ISPM 15) for wood packaging material used in international trade.

• Handling of electrostatic sensitive devices and modules according to relevant standards (MIL-STD-2073-1, MIL-HDBK-773, ANSI/ESD S20.20, ESD TR20.20, MIL-STD-129).

• Compliance with Item Type Storage Code (ITSC) requirements as per AFMCI24-201.

• Use of MIL-STD-147 for palletized unit loads and MIL-STD-648 for specialized shipping containers.

• Preparation, labeling, certification, and compliance for hazardous material shipments according to various regulations (ICAO, CFR Title 49, IATA, IMDG, AFMAN24-604).

• Submission of Safety Data Sheets (SDS) per FED-STD-313 and compliance with FAR clause 52.223-3.

• Use of the Special Packaging Instructions Retrieval & Exchange System (SPIRES) for packaging requirements.

• Packaging must meet specified DoD Military Standards, ASTM, ANSI, and other referenced regulations.

• Compliance with specific instructions for hazardous materials, electrostatic discharge, and international shipments.

• Proper use of identification tags and labels (e.g., DD Form 1574).

Not explicitly stated in this document, but the effective date is March 2025.

• Contractors must use the ASSIST website to access specifications, standards, and data item descriptions.
• Reporting of discrepancies via Web Supply Discrepancy Report (WebSDR) is required.
• Reusable containers must meet AFMC Form 158 requirements and be suitable for return shipment.
• Contact information for AFSC (406 SCMS/GULAA, David Gibson) is provided for inquiries.

Form / Attachment / Pricing Sheet

This document is an Engineering Data List (EDL) that provides a list of engineering drawings, documents, and related information for the B-52 Landing Gear, specifically the Drag Link component.

• Lists specific engineering drawing numbers, revision levels, and associated cage codes.
• Includes nouns and remarks related to each component, such as "TRIPOD LINK, OUTBOARD, DRAG STRUT" and "LABEL, UNIQUE IDENTIFICATION (UID), LANDING GEAR".
• Specifies the "END ITEM" as "B-52 LANDING GEAR" and the "NOUN" as "DRAG LINK, LANDING G".
• Contains "STANDARD ENGINEERING TEXT" with a release statement regarding foreign disclosure approval.
• Includes a note stating that previous "ENGINEERING INSTRUCTIONS (HILL AFB FORM 462)" are superseded and will not be utilized for this component/assembly.

This document is relevant for bidders who may be involved in the manufacturing, maintenance, or supply of B-52 Landing Gear components. It provides critical part numbers, drawing references, and supersession information, which are essential for ensuring compliance and accuracy in any related procurement or work. The note about superseded instructions is particularly important for understanding current requirements.