Blast Machine with skid mounts

Amendment / Modification

• The Offer Due Date/Local Time has been extended.

• The "Response Due Date" has been modified.

• The original Response Due Date was 15 Apr 2026. The new Response Due Date is 20 Apr 2026 at 10:00 am JST.

Amendment / Modification

This amendment modifies the solicitation N6264926Q0226 dated 23 Mar 2026.

Key changes include:

• The deadline for all clarification requests has been extended to 3 Apr 2026 at 1500pm Japan Standard Time.

• The Offer Due Date has been extended to 15 Apr 2026 at 10:00am JST.

• The "Response Due Date" has been changed from 08 Apr 2026 to 15 Apr 2026.

• The Offer Due Date has been extended, providing bidders additional time to submit their proposals.

• The deadline for submitting clarification requests has also been extended.

Solicitation / RFP / RFQ

This solicitation (N6264926Q0226) is for the procurement of one (1) Blast Machine with Skid Mounts. The equipment is intended for onboard and in-shop sandblasting work to remove rust and paint at the X-71 Paint Shop, Bldg. 2078, Ship Repair Facility and Japan Regional Maintenance Center (SRF-JRMC), US Naval Base Yokosuka.

• One (1) blast machine with skid mounts.

• Equipment must be a current production model.

• Total weight (excluding blasting media) not to exceed 4,365lbs (1,980kg).

• Blasting media capacity must be a minimum of 950 liters.

• Must be a dry blast system with a maximum working pressure of 0.76MPa.

• Includes specific requirements for valves, external dimensions, pressure vessel inspection, operating panel, air filter, regulator, electrical components (waterproof, IP54), non-resettable hour meter, and applicable blasting media (Garnet grid, Copper grid).

• Accessories required include a bracket for the hopper, forklift claw provisions, quick connection for blast valve and hose, air filter and regulator, a 20m extension remote control cable, and three (3) button pendant switches.

• Equipment must be usable on 100VAC, 50Hz or 60Hz, single-phase power supply and 0.69MPa compressed air.

• All exposed ferrous parts must be corrosion-resistant painted.

• Hollow spaces must be drainable.

• Lid for chute opening must be removable and not fall into the opening.

• Government-owned hopper will be mounted on the blast equipment.

• Four (4) lifting padeyes with a Safety Working Load (SWL) of at least 50% of the total weight.

• All documentation (manuals, labels, stickers) must be in Japanese or English, or both.

• Contract type is implied to be Firm Fixed Price (as indicated on page 3).

• Delivery is required by December 31, 2026.

• Quotations must be submitted electronically via email to yukako.hishikura.ln@us.navy.mil.

• Quotes are due by April 8, 2026, 10:00 AM local time.

• Submissions must be on an "All or NONE" basis; partial or incomplete quotations are ineligible.

• E-mails exceeding 10MB may not be received.

• Quoters must confirm receipt of their proposal.

• Required submissions include a price proposal and a brochure/catalog of the quoted item.

• Clarification requests must be submitted in writing via email by March 25, 2026, 1500pm Japan Standard Time.

• Evaluation will be based on technical capability and price, with a note that past performance may be considered.

• This acquisition is UNRESTRICTED.

• Solicitation is intended only for sources duly authorized to operate and do business in Japan, as prescribed by DFARS 252.225-7042. Prime Contractors outside of Japan must submit documentation demonstrating compliance.

• The North American Industry Classification Standard (NAICS) code is 811310 with a size standard of $19 million.

• All documents shall be written in English or have English translation.

• The delivery destination is SRF AND JRMC YOKOSUKA, FPO AP 96349, UNITED STATES.

Form / Attachment / Pricing Sheet

This document contains enclosures that appear to be technical details and visual references related to equipment, likely for a procurement opportunity. Enclosure (1) shows images of a "Bracket for hopper" with red circles highlighting specific attachment points. Enclosure (2) provides a technical drawing labeled "Detail for Blast Machine," illustrating dimensions and components of a blast machine in relation to an existing hopper, including "Bracket for hopper" and "Padeye for blast machine." Enclosure (3) shows images and measurements of a "Quick connection" component, with dimensions of 68 mm and 15 mm indicated.

• Visuals and diagrams of equipment components.
• Specific measurements and labels for parts like "Bracket for hopper," "Padeye for blast machine," and "Quick connection."
• Technical drawing with dimensions for a "Blast Machine."

This information is crucial for bidders to understand the physical and technical specifications of potential equipment or modifications required for the opportunity. It provides visual and dimensional data that may be necessary for proposal preparation, site assessment, or understanding the scope of work related to the blast machine and its integration with existing hopper systems.