Bldg 128 Freezer Door Replacement

Form / Attachment / Pricing Sheet

This document is the MAXIMO Initial Equipment Inventory and Replacement/Update Form. It is designed to collect detailed information about existing equipment, as well as data for new or replacement equipment.

• Data Collection: Fields for Data Collector, Phone, Date, Building (Bldg), and Specific Location.
• Type of Equipment: A comprehensive checklist of various mechanical and HVAC equipment, including generators, AC units, chillers, pumps, heaters, heat pumps, boilers, and more.
• Demolished/Removed Equipment: Fields to record Maximo number, Serial number, and Location of equipment that has been removed.
• New/Replacement Equipment: Fields for Manufacturer, Model number, Serial number, Type (e.g., Electric, Oil, Gas, Steam, Hot Water), and Motor Data (HP, Volts, Phase, RLA, RPM, Frame).
• Additional Details: Fields for Tons, Number of Motors, Number of Belts, KW, and Refrigerant type for relevant equipment.

This form is crucial for bidders to understand the existing equipment inventory and the specifications required for any new or replacement equipment. It directly informs the scope of work, material requirements, and potential costs associated with an opportunity, particularly for maintenance, repair, or replacement contracts. Bidders may be required to use this form to report on current assets or to propose new equipment as part of their response.

Other / Unclassified

This document is the "Contractor Environmental Guide" for Marine Corps Base Camp Lejeune, dated September 2023. It serves as a comprehensive resource for contractors working on the installation, outlining federal, state, and local environmental laws, regulations, and installation-specific policies. The guide aims to ensure compliance and minimize environmental impacts from contractor activities.

This guide is crucial for any contractor performing work aboard MCB Camp Lejeune. It details:

• Environmental Management System (EMS): Explains the principles and requirements of the EMS, including pollution prevention, compliance with regulations, and continuous improvement.
• Specific Environmental Areas: Covers detailed requirements and procedures for various environmental aspects such as Air Quality, Hazardous Materials/Waste Management, Asbestos, Lead-Based Paint, Stormwater, Solid Waste, Cultural Resources, Natural Resources, and Permitting.
• Training Requirements: Outlines mandatory EMS and general environmental awareness training for all personnel.
• Points of Contact: Provides essential contact information for environmental offices and emergency response.
• Reporting Procedures: Details requirements for reporting spills, environmental emergencies, and unforeseen site conditions.

Bidders should review this guide to understand their environmental responsibilities and ensure compliance with all applicable regulations and installation policies to avoid potential penalties and project delays.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the requirements for replacing one freezer door at Building 128, Camp Lejeune, N.C., to ensure an airtight seal and maintain the integrity of the refrigerated space.

• Removal of the existing freezer door, jambs, headers, and threshold.

• Repair of walls, floor, and ceiling where demolition occurs to facilitate the new door installation.

• Installation of a new freezer door, frame, and hardware.

• Ensuring an airtight seal for the new door.

• Providing a new stainless steel threshold secured to the floor for a smooth transition.

• Compliance with specified standards including ASTM E84, NSF ANSI 2 & 7, and UL 207 & 723.

• The new door must be a 72" x 61-1/2" panel, 4 inches thick, filled with insulation.

• It must include an outside and inside diamond plate finish matching existing.

• A waterproof thermometer for internal temperature registration is required.

• Anti-condensing strip heaters around the perimeter of the door panel jambs.

• A resilient, non-magnetic, or thermoplastic gasket with a magnetic steel core.

• A replaceable, adjustable rubber or vinyl wiper gasket for the bottom edge.

• Hardware must be polished stainless steel, including two self-closing, spring-loaded hinges per door.

• A cylinder lock with provisions for a padlock and a safety-release handle from the inside.

• Door stops and protective bumpers are required where necessary.

• Gaskets must be natural or synthetic rubber, compliant with NSF/ANSI, designed for 50 percent compression.

• Strip curtains to protect airflow are required.

• The work is to be accomplished at Building 128, Camp Lejeune, North Carolina.

• The specific period of performance is not detailed in this document, but the building must remain in operation with cooler temperatures maintained.

• Contractor must arrange access and scheduling through the contracting officer's representative and the building tenant. Terry Castleberry is the point of contact for access (910-451-6270).

• Field measurements are the contractor's responsibility for determining materials and costs.

• Disposal of asbestos-containing materials and lead-painted building products must be done at the Camp Lejeune sanitary landfill by appointment.

• All other contractor-generated material must be weighed at the base landfill.

• A written permit is required for "hot work" from the fire division, along with two 20-pound 4A:20 BC rated fire extinguishers and a trained fire watch.

• Submittals required include shop drawings, installation drawings, product data (including manufacturer's technical data sheets, MSDS, and maintenance data), and a 10-year commercial limited warranty.

• As-built drawings in AutoCAD and Adobe PDF formats are required.

• Fabricator and installer must have a minimum of three years documented experience and the installer must be certified by the door manufacturer.

Other / Unclassified

This document contains "Section 01 11 00 - SUMMARY OF WORK", "Section 01 14 00 - WORK RESTRICTIONS (MCBL)", "Section 01 20 00 - PRICE AND PAYMENT PROCEDURES (MCBCL)", "Section 01 30 00 - ADMINISTRATIVE REQUIREMENTS", "Section 01 31 23.13 20 - ELECTRONIC CONSTRUCTION AND FACILITY SUPPORT CONTRACT MANAGEMENT SYSTEM", "Section 01 31 50 - TRANSFER AND ACCEPTANCE OF MILITARY REAL PROPERTY", "Section 01 32 16 - CONSTRUCTION PROGRESS DOCUMENTATION", "Section 01 33 00 - SUBMITTAL PROCEDURES", "Section 01 35 26 - GOVERNMENTAL SAFETY REQUIREMENTS", "Section 01 35 29.13 - HEALTH, SAFETY, AND EMERGENCY RESPONSE PROCEDURES FOR CONTAMINATED SITES", "Section 01 42 00 - SOURCES FOR REFERENCE PUBLICATIONS", "Section 01 45 10 - QUALITY CONTROL", "Section 01 50 00 - TEMPORARY CONSTRUCTION FACILITIES AND CONTROLS", "Section 01 57 19 - TEMPORARY ENVIRONMENTAL CONTROLS", "Section 01 78 00 - CLOSEOUT SUBMITTALS", "Section 01 78 23 - OPERATION AND MAINTENANCE DATA", "Section 01 78 24.00 20 - FACILITY ELECTRONIC OPERATION AND MAINTENANCE SUPPORT INFORMATION (EOMSI)", and "Section 01 78 30.00 22 - GIS DATA DELIVERABLES". These sections outline various administrative, procedural, safety, and deliverable requirements for construction projects.

This document provides detailed specifications and requirements for contractors, covering aspects such as work scope, location, scheduling, access, pricing, payment, submittals, safety, environmental controls, quality control, closeout procedures, and GIS data deliverables. Potential bidders should review these sections to understand the administrative and procedural expectations for the project, which are crucial for accurate bidding and successful project execution.

Form / Attachment / Pricing Sheet

This document is a Submittal Register, likely used to track and manage various submittals required during the pre-construction and closeout phases of a project. It serves as a checklist and record-keeping tool for both the contractor and the government.

• Activity/Description: Lists specific items to be submitted, categorized by project phase (e.g., Preconstruction Submittals, Closeout Submittals, Test Reports, Certificates).
• Paragraph No.: References specific sections or paragraphs within contract documents related to each submittal.
• Contractor Action Columns: Fields for tracking when submittals are prepared, submitted, and approved, including dates and responsible parties.
• Government Action Columns: Fields for tracking review, approval, and transmittal of submittals.
• Remarks: A section for any additional notes or comments.

This register provides potential bidders with a clear overview of the types of documentation and plans they will be required to submit throughout the project lifecycle. It highlights key deliverables such as the Schedule of Prices, List of Contact Personnel, Construction Schedule, Accident Prevention Plan, Quality Control Plan, and Environmental Protection Plan. Understanding these requirements is crucial for accurately estimating project timelines and resource allocation during the proposal preparation phase.

Solicitation / RFP / RFQ

This solicitation is for the "Bldg 128 Freezer Door Replacement" project at Camp Lejeune, North Carolina. The estimated cost range is between $25,000 and $100,000, with a contract completion time of 180 days after award. The award will be based on the lowest price.

• Replacement of freezer doors in Building 128.

• Project specifications and drawings are available on SAM.gov.

• Compliance with Executive Order 13706 (Establishing Paid Sick Leave for Federal Contractors) is required.

• Compliance with the Buy American Requirement-Construction Materials is required.

• Contract Completion Date: 180 days after award.

• Estimated Cost Range: $25,000 - $100,000.

• Liquidated Damages: $220 per Calendar Day.

• Proposal Acceptance Period: 60 days from receipt of offers.

• Proposal Due Date: April 2, 2026, 2:00 PM EST.

• Proposals must be submitted via email to NAVFAC_ML_ROICCCampLejeune-Bids1@navy.mil AND C.S. email benjamin.a.bryan.civ@us.navy.mil.

• Basis for Award: Lowest Price.

• Evaluation will consider the Buy American statute requirements.

• This solicitation is restricted to a specific list of contractors: T.E. Davis Construction Company, Joyce & Associates Construction, Inc., Olympic Enterprises, Inc., and Quadrant Construction.

• Site Visit: Tuesday, March 10, 2026, at 9:00 AM at Bldg 128.

• Requests for Information (RFIs) must be submitted to benjamin.a.bryan.civ@us.navy.mil by March 25, 2026, 3:00 PM EST.

• Offerors are advised that funding may not become available, and no award will be made if funds are not available. No reimbursement for proposal costs will be provided.

• Bond Requirements: Bid bonds are required based on dollar values. Proposals less than $40K require no bonds. Proposals $40K and greater require a payment bond. Proposals $150K and greater require a bid bond, a payment bond, and a performance bond.