Bldg 318 & 1250 Gutter, Drain, and Basin Repair, Removal, and Install

Form / Attachment / Pricing Sheet

This document is a U.S. Department of Labor Wage Determination (No. 2015-5117, Revision No. 29) for the Service Contract Act. It establishes the minimum wage rates and fringe benefits required for various occupations in the specified geographic area (Arkansas Counties of Faulkner, Lonoke, Perry, Pulaski, Saline).

• Lists numerous occupational codes and titles, ranging from administrative support to technical and miscellaneous occupations.
• Specifies the minimum hourly wage rate for each listed occupation.
• Indicates that fringe benefits are required and follow the occupational listing.
• Includes notes on Executive Orders (EO) 13706 and 13658, detailing paid sick leave and minimum wage requirements for federal contractors.
• Outlines vacation and holiday provisions.
• Provides information on hazardous pay differentials and uniform allowances.
• Explains the conformance process for additional classifications and wage rates.

This document is critical for bidders responding to solicitations covered by the Service Contract Act. It dictates the minimum labor costs that must be factored into proposals for covered contracts. Bidders must ensure their proposed wage rates and fringe benefits meet or exceed the rates specified in this determination for all applicable occupations to ensure compliance.

Solicitation / RFP / RFQ

This is a combined synopsis/solicitation for commercial products or services for the repair, removal, and installation of gutters, drains, and basins at Buildings 318 and 1250, Little Rock Air Force Base, Arkansas. This announcement constitutes the only solicitation; a separate written solicitation will not be issued.

• Provide all qualified personnel, transportation, tools, equipment, materials, and services required to repair roof gutters, drains, and concrete basins to allow proper water drainage away from Buildings 1250 and 318.

• All work must be conducted in a satisfactory manner to allow proper water drainage without damaging plants or causing erosion.

• Repairs shall be accomplished within 60 days after materials arrive.

• Work shall follow all Federal, State, and local regulations, codes, and license requirements.

• Contract Type: Firm Fixed Price.

• Period of Performance: April 15, 2026, to May 14, 2026.

• Site Visit: March 31, 2026, at 10:30 AM CST. RSVP required.

• Questions Due: April 2, 2026, at 12:00 PM CST.

• Offers Due: April 9, 2026, at 12:00 PM CST.

• Submission Method: Email to the Points of Contact listed.

• Evaluation Criteria: Not explicitly detailed in this document, but the solicitation references FAR 52.212-1, 52.212-3, and 52.212-5.

• This acquisition is set-aside for small businesses only. Offers from large businesses will not be considered.

• NAICS Code: 332311, Size Standard: 750 Employees.

• Vendors must be registered in the System for Award Management (SAM).

• Wide Area Workflow (WAWF) is required for payment requests and receiving reports.

• Attachments referenced include: Performance Work Statement (PWS), SCA Wage Determination, and Addenda to FAR clauses 52.212-1 and 52.212-2.

Statement of Work (SOW) / Performance Work Statement (PWS)

To provide qualified personnel, transportation, tools, equipment, materials, and services to repair roof gutters and drains at Buildings 318 and 1250, Little Rock Air Force Base, Arkansas, ensuring proper water drainage away from the buildings without causing damage to surrounding areas.

• Remove existing drains and concrete basins at specified locations.

• Install new drains, basins, and diverters to redirect water flow.

• Cap and plug existing drain hoses.

• Extend concrete basins and drain lines.

• Install new concrete pavers and metal skirting as needed.

• Add matching colored mulch and dirt to disturbed areas.

• Clean up all excess debris from excavation and sheet metal work.

• Restore flower bed areas to match existing condition and professional appearance.

• Specific tasks are detailed for Building 1250 (Breezeway, Southwest side, South side, North side) and Building 318 (Breezeway).

• Work must follow all Federal, State, and local regulations, codes, and license requirements.

• Gutters must be commercial grade aluminum, match existing color, and be sloped for proper water outflow without cracks or sagging.

• Discharge must prevent erosion or damage to existing plants or buildings.

• Work shall be accomplished within 60 days of material arrival.

• Estimated delivery date of material required within 10 days of contract award.

• Recycling of all recyclable material is mandatory on Little Rock AFB.

• Work/materials must withstand water and wind loads to present a professional appearance.

• Contractor personnel must be easily recognized as contractor employees.

• Work area is located on Little Rock AFB at facilities 1250 and 318.

• Work shall be accomplished within 60 days of material arrival.

• Contractor must provide all necessary personnel, transportation, tools, safety equipment, and materials.

• Welding, Cutting, and Brazing operations must conform to NFPA 51B and NFPA 241, and require an Air Force Form 592 permit.

• If a crane is required, an airfield waiver must be accomplished and signed off by the FAA (minimum 60 days to complete).

• Contractor personnel and vehicles require appropriate passes for installation access.

• Contractor is subject to all installation fire, safety, security, and traffic regulations.

• A 12-month warranty on all material, workmanship, and labor from defects is required.

• Appendices A (Bldg. 1250) and B (Bldg. 318) are separate attachments.

Amendment / Modification

This addendum provides clarifications and instructions related to FAR 52.212-1, Instructions to Offerors—Commercial Products and Commercial Services.

Key points include:

• Submission of Offers: The government will award to the responsible offeror whose offer is most advantageous, considering price and other factors.
• Offeror Consent: Submission of an offer signifies consent to all solicitation requirements, terms, conditions, representations, and certifications.
• Non-Responsiveness: Failure to meet a requirement may result in an offer being deemed non-responsive.
• Submission Details: Offers must be signed, dated, and submitted by the specified deadline. Pricing must be on a quote or Form 1449. Other applicable documentation (e.g., past performance, attachments) may be submitted.
• Minimum Offer Requirements: Offers must include solicitation number, receipt deadline, offeror's contact information, a technical description of items, warranty terms, price breakdown, "remit to" address, SAM.gov registration status, CAGE Code, and acknowledgment of amendments. Past performance information is required if it's an evaluation factor.
• Offer Expiration: Offers must be held firm for 60 calendar days from the receipt date, or a longer period if specified by the offeror.

This document modifies and clarifies instructions pertaining to the submission of offers, including required content and evaluation considerations, as guided by FAR 52.212-1.

Bidders should ensure their offers include all specified information and meet the outlined requirements to avoid being deemed non-responsive. The period for offer acceptance is a minimum of 60 days, and offerors must clearly state their offer expiration date.

Amendment / Modification

This addendum modifies the evaluation factors and process for the solicitation.

• Clause 52.212-2, Evaluation—Commercial Products and Commercial Services: The addendum provides a detailed breakdown of how offers will be evaluated.

• Evaluation Factors: The original solicitation's evaluation factors are clarified and expanded upon.

• Evaluation Process: The addendum outlines a multi-step evaluation process:

  1. Offers will be ranked by price.
  2. A technical evaluation will be conducted on the lowest priced responsive offers to determine if they are "Acceptable" or "Unacceptable" based on specifications in the solicitation or PWS/attachments.
  3. The technical evaluation will continue until at least three (3) offerors are deemed "Acceptable" (or all offers if fewer than three are acceptable).
  4. Award will be made to the offeror with the best combination of price and technical capability.

• Definitions: Clarifies what constitutes an "Acceptable" and "Unacceptable" technical submission.

• Other Provisions: Includes details on the government's right to communicate with offerors, not select a contractor, and the process for award notification.