Bumblebee Revised Stewardship IRSC

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the technical specifications for service work items aimed at increasing forest health and vigor, diminishing tree competition and mortality, and reducing hazardous fuels to mitigate wildfire threats.

• Thinning mixed conifer stands: Removal of included sawtimber and non-saw timber from designated areas.

• Hazardous fuels removal: Abatement and removal of hazardous standing fuels along haul roads.

• Mastication: Shredding and mulching of brush, saplings, and downed woody material.

• Road reconstruction: Reconstructing roads to chip van or log truck standards.

• Item 1a: Thinning Unit Products Removal: Removal of included products meeting specific size and designation criteria from approximately 1,458 acres. This includes sawtimber, YUMD, and cull tree topwood. Snags will be removed from 566 acres.

• Item 1b: Hazardous Standing Fuels Removal: Removal of included cull logs and snags along haul roads, with specific requirements for felling and skidding operations, especially concerning archaeological sites.

• Item 2: Mastication (Bumblebee): Mastication of approximately 836 acres, with specific spacing requirements for live shrubs and trees, and debris size limitations. This work is contingent on the completion of Item 1.

• Work Item 36a: Cut and Remove Included Timber (Marble Mountain): Removal of timber products from National Forest lands in specific units.

• Work Item 36b: Cut Skid and Deck Biomass (Marble Mountain): Cutting, skidding, and decking of non-saw material and biomass meeting specific utilization standards.

• Optional Item 37: Mastication (Marble Mountain): Mastication of approximately 730 acres, with specific requirements for shrub and tree removal, and debris handling, particularly near powerlines.

• GPS Geofencing: Units are defined by geo-fence boundaries, requiring contractors to use GPS receivers with specified accuracy tolerances.

• Mastication Spacing: Specific spacing requirements for live shrubs and trees (e.g., 20x20 ft, 15x15 ft) depending on location and tree type.

• Debris Size: Masticated debris generally not exceeding 2 feet in length, with specific mulching or piling requirements based on slope.

• Snag and Log Retention: Specific numbers of snags and logs to be left per acre, with others to be decked for burning.

• Acceptable Quality Levels (AQL): Minimum AQLs are defined for various work items (e.g., 100% for Item 1b, 90% for Mastication).

• Inspection and Acceptance: Work will be inspected visually and through verification plots. Rework or no payment may result from failure to meet specifications.

• The document pertains to the Stanislaus National Forest, Summit Ranger District.

• Specific periods of performance are not detailed in this excerpt but are implied to be tied to seasonal restrictions (e.g., fire precautionary period, raptor nesting seasons).

• Compliance with Federal, State, and local statutes and environmental quality laws.

• Restrictions may apply due to fire risk, active raptor nests, soil moisture, snow depth, or discovery of cultural/archeological sites.

• Contractor is responsible for obtaining GPS equipment and adhering to geo-fence boundaries.

• Coordination with the Forest Service for inspections and issue resolution is required.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the road maintenance requirements for the Bumblebee Revised Stewardship IRSC (Marble Mountain Area) within the Stanislaus National Forest, Summit Ranger District.

The contractor is responsible for maintaining various roads as detailed in the Contract Road Maintenance Requirements Summary. This includes:

• Pre-Haul Road Maintenance: Specific tasks are indicated by codes (e.g., T801-T814) for each road segment.
• During-Haul Road Maintenance: Similar to pre-haul, with specific maintenance specifications.
• Post-Haul Road Maintenance: Maintenance requirements after the hauling phase.

The document details numerous "T-Specifications" for specific maintenance activities, including:

• T-801 Vegetation Removal-Roadway: Removing trees and snags within 5 feet of the roadway.
• T-802 Vegetation Removal-Roadside: Cutting and disposing of vegetation impacting road operations or sight distance.
• T-803 Pavement Cleaning: Removing loose material from paved surfaces.
• T-804 Bridge Deck and Curb Cleaning: Cleaning bridge decks and curbs, ensuring no debris enters streams.
• T-805 Road Grading: Maintaining roadbed condition for traffic and drainage, including blading, turnouts, shoulders, and berms.
• T-806 Slide Removal and Slump Repair: Excavating, hauling, and compacting material for slide and slump remediation.
• T-807 Surface Repair (Bituminous): Repairing potholes and failed areas on bituminous surfaces.
• T-808 Surface Repair (Aggregate/Native): Repairing potholes, washouts, and soft areas on aggregate or native-surfaced roads.
• T-809 Dust Abatement: Preparing and applying materials to control dust.
• T-810 Ditch Maintenance: Routine maintenance of ditches for unobstructed drainage.
• T-811 Drainage Structures: Maintaining culverts, armored crossings, and other drainage features.
• T-812 Miscellaneous Structures: Maintaining cattleguards, gates, and other road structures.
• T-813 Waterbar: Restoring waterbars in the roadbed.
• T-814 Closure Devices: Furnishing, installing, or removing barriers for road closures.

The document pertains to roads within the Marble Mountain Area of the Stanislaus National Forest.

• Definitions: Provides definitions for various road maintenance terms.
• Traffic Control: Requires a Traffic Control Plan for road construction or maintenance, adhering to the "2012 CA Manual on Uniform Traffic Control Devices for Street and Highways."
• Material Specifications: Details requirements for dust abatement materials and surface repair materials.
• Disposal: Specifies disposal locations for excess material.
• TBD Items: Some road termini and maintenance details are marked as "TBD" (To Be Determined) after layout completion.

Other / Unclassified

This document is a vicinity map for the "Bumblebee Revised Stewardship IRSC" located within the Stanislaus National Forest - Summit Ranger District. It visually delineates the "Bumblebee" and "Marble Mountain" project areas, showing their proximity to surrounding national forests (Eldorado NF, Humboldt-Toiyabe NF, Sierra NF) and Yosemite National Park. The map also indicates nearby towns and major roadways.

This map is relevant to potential bidders by providing a geographical context for the "Bumblebee Revised Stewardship IRSC" opportunity. It helps visualize the location and boundaries of the work areas, which is crucial for understanding logistical considerations, site access, and the overall operational environment.

Other / Unclassified

This document is a "Cruise Report" for the "Bumblebee" timber sale (Cruise #53883). It contains detailed information about the timber cruise, including:

• Cruise Header & Certification: Confirms the timber was designated and cruised according to USDA Forest Service procedures.
• Biomass Equation Table: Lists species and their corresponding biomass equation factors.
• Volume Equation Table: Details equations used for volume calculations.
• Strata, Unit, Payment Unit, and Sample Group Reports (A01): Provides breakdowns of the sale area by strata, units, and sample groups, including acreage.
• Log Stock Tables (R401, R402, R501): Summarizes log stock by species, product, and log class, detailing gross and net board feet (BDFT) and cubic feet (CUFT).
• Sale Appraisal Summaries (R401, R402): Presents appraisal information for primary products.
• Error Term, Volume, and Confidence Interval Reports (ST3): Provides statistical data on volume estimates and confidence intervals.
• Volume Summary by Strata (VSM3): Summarizes volume data by strata.
• Volume Per Acre Summary by Strata (VPA3): Details volume per acre by strata.
• Biomass Sale Summary (WT5): Summarizes biomass components (stem weight, tip, branches, foliage) in green tons by species and stratum.

This document provides detailed technical data related to the timber cruise for the "Bumblebee" sale. Bidders interested in this opportunity would use this information to understand the volume, species composition, biomass, and physical characteristics of the timber being offered. It serves as a foundational data set for developing bids and understanding the resource being sold.

Solicitation / RFP / RFQ

This solicitation is for "Bumblebee Revised Stewardship IRSC" (Solicitation Number 12363N26Q4011) issued by the USDA Forest Service. The project aims to increase forest health and vigor, diminish tree competition and mortality, and reduce hazardous fuels to mitigate catastrophic wildfire risk. The work involves thinning mixed conifer stands, removing included sawtimber and non-saw timber, abating hazardous standing fuels along haul roads, masticating brush and downed woody material, and reconstructing roads to chip van or log truck standards.

Mandatory Work Activities include:

• Bumblebee Cutting and Hauling Included Products (Thinning Unit Products Removal, Hazardous Standing Fuels Removal)
• Bumblebee Mastication
• Bumblebee Road Reconstruction of All Haul Roads (Mobilization, Construction survey and staking)
• Bumblebee Road Reconstruction of various Haul Roads (e.g., 4N12, 4N12H, 4N12P, 4N28Y, 4N28YA, 4N52Y, 4N53Y, 4N76, 5N11, 5N46Y, 5N46YA, 2N05Y, 2N05YA, 2N06, 2N07, 2N14Y, 2N14YA, 2N17, 2N50, 2N55, 2N91, 2N98Y, 3N07, 3N07C, 3N08, 3N40Y, 3N42Y, 3N42YA, 3N42YB, 3N79)

Optional Work Activities include:

• Marble Mountain Timber/Product Removal (Cut and Remove Included Timber, Cut Skid and Deck Biomass)

• Marble Mountain Mastication

• Contract Type: Firm Fixed Price Commercial Services Contract with requirements for timber.

• Period of Performance: From Date of Award through May 30, 2031.

• Estimated Value: Not explicitly stated, but includes timber value.

• Offers are due by June 22, 2026, 1600 PDT.

• Quotes must be submitted electronically as two separate documents: a technical proposal and a price quote.

• Evaluation factors include: Technical Approach, Relevant Past Performance, Benefit to Local Community, and Price.

• A bid guarantee of 20% of the total price offered for Construction Items is required.

• Payment and performance bonds are required for construction projects greater than $150,000.

• The acquisition is UNRESTRICTED.

• NAICS Code: 113310 (Timber Tract Operations)

• Size Standard: 500

• A site visit was held on October 23, 2025.

• The contract is a Stewardship Contracting project under authority provided by Public Law 113-79.

• Payment for Land Management Work Activities will be made in Stewardship Credits and Appropriated Funds.

• Fire precautions and control measures are detailed, including Project Activity Levels (PALs).

• Specific clauses related to Buy American, labor standards, and environmental protection are included.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document, Appendix B of the Bumblebee Revised Stewardship IRSC, outlines the "Stewardship Contract - Timber Removal Specifications" for the Bumblebee Area within the Stanislaus National Forest, Summit Ranger District. It details the requirements and conditions for timber removal operations.

• Contract Area: Defines the boundaries and acreage of the contract area (approximately 2,775 acres) located in T4N R18E and T5N R18E.

• Timber Specifications: Details included timber (standard, substandard, damaged, unintentionally cut, construction timber), utilization standards, and timber designations (Clearcutting Units, Overstory Removal Units, Understory Removal Units, Individual Trees).

• Rates of Payment: Outlines current contract rates, other payment rates, and procedures for timber cut through mistake, damaged, or unnecessarily cut.

• Payments: Covers amount payable for timber, integrated resource accounts, cash deposits, and refunds.

• Transportation Facilities: Authorizes construction and use of roads and other transportation facilities.

• Operations: Specifies control of operations, safety, prevention of oil discharges, hazardous substances, acceptance of work, conduct of logging (felling, bucking, limbing, skidding, yarding), erosion prevention and control, and slash treatment.

• Scaling: Details scaling instructions, services, locations, adjustments, and weighing services.

• Other Conditions: Includes title and liability, modification for catastrophe, and sale of other materials.

• Performance and Settlement: Covers contract closure and settlement procedures.

• Utilization Standards: Specific minimum tree and piece requirements are detailed in Division A2.

• Scaling: Timber will be scaled according to FSH2409.11a–National Forest Scaling Handbook, with specific parameters for length, diameter, and trim allowance.

• Erosion Control: Specific tillage depths and acreages for landings, main skid roads, and temporary roads are outlined.

• Slash Treatment: Various methods (Buck-L, Buck-P, Bury, Chip, Deck, Mach, Pile, Remove, Scatter, Stack, View, YUMD, YUME, YUML, YUMR) are specified for different types of slash and areas.

• Contract Area: Stanislaus National Forest, Summit Ranger District.

• Operations Schedule: Units 800 through 952 must be completed by October 31st, 2029. Hazard trees must be felled prior to hauling. All sawtimber must be presented for scaling within 30 days of cutting from June 1st to October 15th.

• Road Use: Specific restrictions and limitations apply to the use of existing roads (coded U, A, R, W).

• Pesticide Use: Borate compound application for stump treatment must comply with California laws and regulations.

• Weed-Free Material: Any hay, straw, or mulch used must be State of California certified weed-free.

• Product Identification: Hammer branding and highway-yellow paint are required for product identification.

• Export Restrictions: Unprocessed timber generally cannot be exported from the United States.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document, Appendix B of the Bumblebee Revised Stewardship IRSC (Marble Mountain Area), outlines the "Stewardship Contract - Timber Removal Specifications." It details the requirements and conditions for the removal of timber from the specified contract area.

• Contract Area: Approximately 4,644 acres located in T2N R17E and T3N R17E.

• Timber Specifications: Defines "Included Timber" (standard, substandard, damaged, unintentionally cut, construction, and other material), utilization standards, and timber designations (Clearcutting Units, Overstory Removal Units, Understory Removal Units, Individual Trees, Designation by Description/Prescription).

• Operations: Covers felling, bucking, limbing, skidding, yarding, landings, skid trails, erosion prevention, slash treatment, and scaling.

• Transportation: Details requirements for the use of roads and transportation facilities.

• Utilization Standards: Minimum specifications for timber removal are detailed in Division A2, including Diameter Breast High (DBH), number of pieces per tree, length, and net scale.

• Scaling: Specifies scaling instructions, services, locations, and accountability procedures.

• Erosion Control: Requirements for vegetative soil stabilization, special erosion prevention measures, soil scarification, and tillage are outlined.

• Slash Treatment: Methods for treating construction and logging slash are detailed, including bucking, piling, scattering, and burying.

• Contract Area: Approximately 4,644 acres in Stanislaus National Forest, Summit Ranger District.

• Period of Performance: Not explicitly stated in this appendix, but implied to cover the duration of the timber removal operations.

• Safety: Emphasizes contractor responsibility for compliance with safety requirements and prevention of oil discharges.

• Environmental Protection: Includes measures for erosion prevention, control, and slash treatment.

• Roads and Water Supply: Outlines requirements for the use of roads and water supply.

• Wildlife: Mentions site-specific special wildlife survey measures and the potential for waiver requests.

• Product Identification: Requires hammer branding and/or highway-yellow paint for identification of timber products.

• Timber Use Restrictions: Specifies that unprocessed timber shall not be exported from the United States and must be delivered to a domestic processing facility.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the road maintenance requirements for the Bumblebee Revised Stewardship IRSC (Bumblebee area) within the Stanislaus National Forest, Summit Ranger District.

The document details various "T-Specifications" for road maintenance, including:

• T-801 Vegetation Removal-Roadway: Removing fallen trees and snags within 5 feet of the roadway.
• T-802 Vegetation Removal-Roadside: Cutting and disposing of vegetation impacting road operational capability, sight distance, or maintenance operations.
• T-803 Pavement Cleaning: Removing loose material from paved traveled ways, shoulders, and turnouts.
• T-804 Bridge Deck and Curb Cleaning: Cleaning bridge decks and curbs, ensuring drainage is clear.
• T-805 Road Grading: Maintaining native or aggregate roadbeds for traffic and drainage, including crown, inslope, outslope, turnouts, shoulders, and berms.
• T-806 Slide Removal and Slump Repair: Excavating, hauling, placing, and compacting material for slide and slump repairs.
• T-807 Surface Repair (Bituminous): Repairing potholes and failed areas on bituminous surfaces.
• T-808 Surface Repair (Aggregate/Native): Repairing potholes, washouts, and soft areas on aggregate or native-surfaced roads.
• T-809 Dust Abatement: Preparing the traveled way and applying materials to abate dust.
• T-810 Ditch Maintenance: Routine maintenance of ditches for unobstructed drainage.
• T-811 Drainage Structures: Maintaining drainage structures like culverts, catch basins, and drainage dips.
• T-812 Miscellaneous Structures: Maintaining cattleguards and gates.
• T-813 Waterbar: Restoring waterbars in the roadbed.
• T-814 Closure Devices: Furnishing, installing, or removing barriers for road closures (excluding gates).

Specific requirements are detailed within each T-Specification, including dimensions, material types, application rates, and disposal methods. For example, vegetation removal has specific height and distance requirements, while road grading specifies loosening depth and compaction methods.

The document pertains to roads within the Bumblebee area of the Stanislaus National Forest, Summit Ranger District. Specific roads and mileposts are referenced in various tables throughout the document.

• A Traffic Control Plan is required for all phases of road construction or maintenance.
• Material disposal must follow designated sites or Forest Service direction.
• Weed-free material certification is required for T-808.
• Dust abatement plans require Forest Service approval.
• Specific material types and certifications are required for bituminous and aggregate repairs.

Forms / Attachments / Pricing Sheets

This document contains a set of detailed engineering drawings and specifications for the Bumblebee Revised Stewardship IRSC project. It outlines the scope of work, materials, and methods for road reconstruction and maintenance activities within the Stanislaus National Forest.

• Index of Sheets (G-01): Provides a table of contents for all included drawings.
• Overview Map (G-02): Shows the project location and general layout of roads to be worked on.
• Estimate of Quantities (G-03): Details the specific quantities of materials and work required for various tasks (e.g., excavation, aggregate, culvert work).
• General Notes (G-04): Outlines important project requirements, abbreviations, and general instructions for the contractor.
• Work Lists and Maps (C-01 through C-22): A series of detailed drawings and associated work lists for specific road segments (e.g., 4N12, 4N28Y, 5N11) specifying tasks such as roadbed reconditioning, drainage improvements, asphalt patching, and installation of waterbars and culverts.
• Standard Details (C-14 through C-22): Illustrates specific construction methods and requirements for various elements like staking, clearing and grubbing, rolling dips, armored flow lines, waterbars, barricades, and asphalt patching.

This document is critical for potential bidders as it defines the exact nature, scope, and technical requirements of the road reconstruction and maintenance work. Bidders must review these details to accurately estimate costs, develop a project plan, and understand all compliance and performance expectations. The detailed work lists and quantities are essential for proposal preparation.

Forms / Attachments / Pricing Sheets

This document contains detailed maps and work lists for various roads within the Marble IRSC project area. It outlines specific tasks, locations, and quantities for road construction and maintenance activities.

• Road Identification: Each section is organized by road number (e.g., 2N05Y, 3N07).
• Work Lists: For each road segment, the document details specific pay items, work descriptions (e.g., Linear Grading, Roadbed Reconditioning, Drainage Excavation), quantities, and units.
• Sensitive Areas: Identifies and provides limitations for working within sensitive species, sensitive habitat (Lava Cap), and invasive species areas.
• Construction Details: Includes diagrams and notes for various construction elements such as rolling dips, waterbars, swales, culvert installation/removal, and erosion control measures.
• Limitations: Specifies restrictions for road construction and T-Spec maintenance within sensitive areas, including prohibitions on ground disturbance, specific clearing and grubbing requirements, and equipment staging.

This document is crucial for bidders to understand the scope of work, specific locations, and the types of activities required for road maintenance and construction within the Marble IRSC project. It highlights environmental considerations and limitations that will impact project execution and planning. Bidders should use this to estimate resources, identify potential challenges, and ensure compliance with environmental regulations.

Form / Attachment / Pricing Sheet

This document is a map titled "Contract Area Map 1" for the Bumblebee Revised Stewardship IRSC UAS. It visually delineates the contract area and associated features relevant to the stewardship project.

• Contract Area Boundary: Outlines the primary area of work.
• Cutting Units: Identifies specific units for timber harvesting activities, with associated item numbers and clauses.
• Special Areas: Designates areas such as "Designated Opening," "Potential Water Sources," "Hazard Tree Unit," and "Controlled Areas" with specific restrictions or requirements.
• Transportation System: Depicts existing roads and trails, including those with hauling restrictions or requiring reconstruction.
• Environmental Features: Highlights "Streamcourse Protection" zones (perennial, intermittent, and ephemeral), "Lava caps," "Meadows," and sensitive plant areas.
• Noxious Weeds: Indicates areas designated for noxious weed management.
• Other Symbols: Includes symbols for "Residence," "Geo-fence," and "Emergency Precautions."
• Supplemental Information: Provides a legend for various symbols and abbreviations used on the map, including definitions for "Designation by Prescription," "Whole Tree Yarding," "Directional Felling," and "Slash Treatment."
• Subdivision Units: Lists specific units associated with different contract subdivisions.

This map is crucial for bidders to understand the geographical scope, specific work areas, environmental considerations, and operational constraints within the Bumblebee Revised Stewardship project. It directly informs planning for site access, timber harvesting, environmental protection measures, and overall execution of the contract.

Form / Attachment / Pricing Sheet

This document is a map titled "BUMBLEBEE REVISED STEWARDSHIP IRSC Contract Area Map 3 - Marble Mountain Area." It visually delineates the contract area and associated features relevant to the stewardship IRSC opportunity.

• Contract Area Boundary: Outlines the primary area for the stewardship contract.
• Cutting Units: Identifies specific units for timber harvesting or other silvicultural treatments, with references to solicitation clauses (e.g., 36a, 36b).
• Special Areas: Highlights areas with specific management requirements, such as:
  • Designated Openings (C2.355#, C6.36#)
  • Potential Water Sources (C5.35#)
  • Protection of Improvements (e.g., gates, fences, survey monuments) (C6.41#, Clause 31, Clause 32)
  • Noxious Weed Areas (N1, N2) (B1.1, C6.41#, C6.42#, Clause 37)
  • Sensitive Plant Areas (CA-5) (B1.1, 24, C6.41#, Clause 29)
  • Streamcourse Protection Zones (perennial, intermittent, ephemeral) with specific exclusion distances for equipment and landings (B1.1, Clause 40)
  • Lava Caps and Meadows requiring protection (B1.1, C6.41#, Clause 29, Clause 38)
  • Controlled Areas with seasonal closures (CA-3, CA-4) (Clause 12, C6.241)
• Transportation System: Depicts existing roads (including those with hauling restrictions) and trails.
• Supplemental Information: Provides a legend for various operational designations (e.g., Designation by Prescription, Whole Tree Yarding, Directional Felling, Mechanized Harvesting) and their corresponding clauses.
• Fully Infested Cheatgrass Units: Lists specific units designated as fully infested with cheatgrass.

This map is crucial for bidders to understand the physical boundaries of the work, the location and nature of specific operational units, and the environmental or management constraints that will apply. It directly informs the planning and execution of proposed activities, particularly regarding timber harvesting, site protection, and compliance with specified clauses.

Form / Attachment / Pricing Sheet

This document is a map titled "BUMBLEBEE REVISED STEWARDSHIP IRSC Contract Area Map 4 - Marble Mountain Area." It serves as a visual aid for the Bumblebee Revised Stewardship contract, detailing specific areas and features within the Stanislaus National Forest, Summit Ranger District.

• Contract Area Boundary: Outlines the primary area of the contract.
• Designated Openings: Identifies specific zones within the contract area.
• F1 Mastication: Highlights areas designated for mastication, an optional item.
• Noxious Weed Areas (N1, N2): Delineates areas with noxious weed presence, with different size thresholds.
• Controlled Areas (CA-3, CA-4, CA-5): Specifies areas with seasonal restrictions, including one for sensitive plants.
• Streamcourse Protection Zones: Indicates buffer zones around perennial, intermittent, and ephemeral streams, with varying restrictions for different equipment and activities.
• Other Features: Includes symbols for roads, trails, springs, mines, residences, fences, and other improvements.
• Legend: Provides a key to the various symbols and line types used on the map, along with corresponding contract clauses and section numbers.

This map is crucial for bidders to understand the geographical scope and specific operational constraints of the contract. It visually defines work areas, sensitive zones (like streamcourses and areas with sensitive plants), and restricted areas, directly impacting planning, execution, and compliance for any proposed work.

Wage Determination

This document provides the U.S. Department of Labor's Wage Determination for service contracts related to forestry, land management, cleaning of public use areas, and timber inventory services in California.

• Occupational Listings: Provides specific wage rates and fringe benefits for various occupations, including Brush/Precommercial Thinner, Choker Setter, Faller/Bucker, Forestry/Logging Heavy Equipment Operator, Forestry Technician, Forestry Truck Driver, General Forestry Laborer, Nursery Specialist, Slash Piler/Burner, Tree Climber, Tree Planter, and Tree Planter, Mechanical.
• Fringe Benefits: Details required fringe benefits, including Health & Welfare ($5.55/hour or $222.00/week) and specific rates for contracts also covered by Executive Order 13706 ($5.09/hour or $203.60/week).
• Paid Sick Leave (EO 13706): Federal contractors must provide 1 hour of paid sick leave for every 30 hours worked, up to 56 hours annually, for employees on contracts awarded on or after January 1, 2017.
• Minimum Wage (EO 13658): For contracts awarded between January 1, 2015, and January 29, 2022 (and not renewed/extended after January 30, 2022), the minimum wage is $13.30 per hour or the applicable wage determination rate, whichever is higher.
• Vacation: 2 weeks paid vacation after 1 year of service, 3 weeks after 5 years, and 4 weeks after 15 years.
• Holidays: A minimum of eleven paid holidays per year are required.
• Uniform Allowance: If uniforms are required, contractors must furnish them or reimburse employees for the cost of purchase and maintenance ($3.35/week or $.67/day), unless "wash and wear" materials are used and no special cleaning is required.

Details the process for requesting additional classifications and wage rates not listed in this determination, requiring contractor submission of a Standard Form 1444 (SF-1444) to the contracting officer for review and approval by the Wage and Hour Division.

Wage Determination

This document is a General Decision (CA20260018) dated 01/30/2026, which supersedes CA20250018. It provides prevailing wage rates and fringe benefits for various construction trades across multiple counties in California. The document is organized by trade (e.g., Asbestos Removal, Boiler Maker, Bricklayer, Carpenter, Electrician, Ironworker, Laborer, Painter, Plasterer, Plumber, Roofer, Sheet Metal Worker, Sprinkler Fitter, Truck Driver, Welder) and specifies different rates based on geographic areas within California.

• Geographic Scope: The wage determination covers numerous counties in California, with specific areas often divided into "Area 1" and "Area 2" or further subdivisions.
• Trades Covered: A comprehensive list of trades and their associated wage and fringe benefit rates is provided.
• Effective Dates: Each wage determination has a specific effective date, typically listed at the beginning of each trade's section.
• Premiums and Footnotes: Special conditions, such as "Premium Pay" for specific locations, "High Work" rates, "Spray Work," and other footnotes, are detailed for certain trades, which can affect the total compensation.
• Executive Orders: The document references Executive Order 13706 (Paid Sick Leave) and Executive Order 13658 (Minimum Wage for Federal Contractors), outlining requirements for federal contracts.

This wage determination is crucial for any bidder on federal or federally-assisted construction projects in the specified California counties. It establishes the minimum wage and fringe benefits that must be paid to laborers and mechanics employed on the project, as required by the Davis-Bacon Act and related acts. Bidders must ensure their cost proposals and project labor costs comply with these prevailing wage rates.