C-5 Nose Landing Gear Door Actuator Assemblies

Other / Unclassified

This document is a placeholder or error message indicating that the PDF content could not be displayed by the viewer. It provides instructions for upgrading Adobe Reader or seeking further assistance.

This document does not contain substantive information related to the SAM.gov opportunity. It is an administrative message related to PDF rendering and does not provide details on requirements, deliverables, or submission instructions for bidders.

Other / Unclassified

This document is a placeholder page indicating that the PDF content could not be displayed. It suggests upgrading to the latest version of Adobe Reader for Windows, Mac, or Linux and provides a link for downloading it. It also offers a link for more assistance with Adobe Reader.

This document does not contain information relevant to the opportunity itself, such as requirements, scope, or deadlines. It is an administrative message related to PDF display issues.

Form / Attachment / Pricing Sheet

This document outlines the specific packaging and marking requirements for items associated with the opportunity. It details compliance with international regulations regarding wood packaging material (WPM) and specifies standards for preservation, packaging levels, and container marking.

• WPM Compliance: Adherence to UN-implemented restrictions on WPM, including requirements for debarked wood and heat treatment (HT).
• Packaging Standards: References MIL-STD-2073-1 for military packaging and MIL-STD-129 for shipping and storage markings.
• Container Marking: Specifies criteria for shipping container marking, including potential additional requirements beyond MIL-STD-129 (e.g., unit serial numbers, OEM information).
• Item-Specific Data: Provides coded data for various items, including unit pack weight, length, width, depth, and cube, along with preservation methods and materials.

Bidders must carefully review these packaging and marking requirements to ensure their proposals and subsequent fulfillment of any awarded contract meet all specified standards. Failure to comply can impact delivery and acceptance of goods.

Other / Unclassified

This document is a placeholder or error message indicating that the PDF viewer could not properly display the document content. It suggests upgrading to the latest version of Adobe Reader and provides links for download and assistance.

This document does not contain substantive information related to the SAM.gov opportunity. It is an administrative message related to PDF rendering and does not provide details on requirements, deliverables, or submission instructions for bidders.

Form / Attachment / Pricing Sheet

This document is a Contract Data Requirements List (CDRL) that specifies data items to be delivered under a contract. It outlines the requirements for specific data products, including their format, submission frequency, and distribution.

• Data Item No. (Block 1): Identifies specific data items, such as the "Item Unique Identification (IUID) Marking Plan" (A/B/C/D/E006).
• Title of Data Item (Block 2): Describes the content of the data item.
• Authority (Block 4): References the Data Item Description (DID) number (e.g., DI-MGMT-81803A) which provides detailed instructions for the data product.
• Contract Reference (Block 5): Links the data item to a specific contract requirement, such as a Performance Work Statement (PWS) section.
• Frequency and Submission (Blocks 10-13): Details when and how often data items are to be submitted, including initial and subsequent submission dates.
• Distribution (Block 14): Specifies the addressees and the number of copies for each data item.
• Remarks (Block 16): Provides additional clarifying information, including contact details for points of contact (PCO, PM, ENG) and required formats (Microsoft Office compatible or Adobe PDF).

This CDRL is crucial for bidders as it defines specific data deliverables required post-award. It highlights the need for an "IUID Marking Plan" and provides the DID (DI-MGMT-81803A) that bidders must follow for its preparation. Understanding these requirements, including submission timelines and distribution lists, is essential for accurately estimating proposal costs and ensuring contract compliance.

Form / Attachment / Pricing Sheet

This document is a Contract Data Requirements List (CDRL) that specifies data items to be delivered under a contract. It outlines the requirements for an "GIDEP Alert/Safe Alert Report".

• Data Item No: A/B/C/D/E007
• Title: GIDEP Alert/Safe Alert Report
• Subtitle: GIDEP Report
• Authority: DI-QCIC-80125B
• Contract Reference: IAW PWS 4.4.12
• Requiring Office: 409 SCMS/GUMA
• Frequency: Monthly, due by the 10th calendar day after the end of the month.
• Submission: Email to Program Manager 409 SCMS in Microsoft Office or Adobe PDF format.
• Content: The report should notify the Government of non-conforming items, supplies, services, or safety problems that have adversely impacted or have the potential to adversely impact the program. The format can be contractor-tailored but must adhere to DD Form 1938 electronic template and specific guidance.
• Distribution: Approved for Public Release; distribution is unlimited.

This CDRL details a mandatory reporting requirement for contractors concerning safety and quality issues. Bidders should note the specific content, frequency, and submission method for these reports as it will be a contractual obligation.

Form / Attachment / Pricing Sheet

This document is a Contract Data Requirements List (CDRL) that specifies data items to be delivered by the contractor under a contract. It outlines the requirements for reporting commercial asset visibility (End Item Report).

• Data Item No: A/B/C/D/E002
• Title: Commercial Asset Visibility (End Item Report)
• Authority: DI-MGMT-81838
• Contract Reference: PWS 4.8
• Frequency: See Block 16
• Reporting: End Item transactional data is to be submitted electronically via the CAV AF website or CICA XML.
• Submission: A Letter of Transmittal is required monthly with the delivery order completion. Final submission with DD Form 250 in WAWF.
• Reporting Requirements: Daily and/or within 24 hours of a supply or maintenance action occurrence, as per CAV AF Reporting Requirements Document. Data must be current within 24 hours of the last End Item maintenance occurrence.
• Performance Periods: Basic Year Period (A002), Ordering Period 1 (B002), Ordering Period 2 (C002), Ordering Period 3 (D002), Ordering Period 4 (E002).

This CDRL details the specific reporting requirements for Commercial Asset Visibility (End Item Report). Bidders should review these requirements to understand the data submission obligations, including frequency, format (electronic via CAV AF website or CICA XML), and the need for a Letter of Transmittal and final submission via WAWF. This information is crucial for understanding the post-award data delivery expectations.

Form / Attachment / Pricing Sheet

This document, DD Form 1423-1 (CONTRACT DATA REQUIREMENTS LIST), outlines the specific data items required from a contractor as part of a contract. It details the nature, frequency, submission requirements, and distribution of these data items.

• Data Item No. & Title: Specifies the type of data required, such as "Government Property (GP) Inventory Report."
• Frequency: Indicates how often the data must be submitted (e.g., annually, upon request).
• Submission Requirements: Details the deadline for submission (e.g., within 7 calendar days of the reporting period end or government request) and the format (e.g., English language).
• Distribution Statement: Defines who is authorized to receive the document, including any export control warnings and destruction notices.
• Addressees & Copies: Lists the specific offices or individuals to whom the data should be sent and the number of copies required.
• Tailoring: Specifies which data fields are not required for certain items.

This CDRL is crucial for bidders to understand their reporting obligations regarding government property. It clarifies the specific inventory reports needed, when they are due, to whom they should be submitted, and any special handling instructions (like export control). Bidders must factor the effort and cost associated with fulfilling these data requirements into their proposals.

Form / Attachment / Pricing Sheet

This document, DD Form 1653, provides detailed transportation data for solicitations. It outlines recommended F.O.B. terms, transportation provisions, and clauses, as well as specific instructions for DCMA (Defense Contract Management Agency) transportation contacts. It also details transportation funds information, including Line of Accounting (LOA) and account codes, and specifies multiple "Ship To" locations with associated National Stock Numbers (NSNs) or Pseudo NSNs, Purchase Instrument Line Item Numbers, DoDAAC/MAPAC, Mark For information, and addresses.

• F.O.B. Terms: Recommends "Origin" or "Destination" and specifies "Data/First Article F.O.B. Destination."
• Transportation Provisions/Clauses: Cites FAR citations 52.247-29, 52.247-53, and 47.305-10.
• DCMA Contact Information: Provides detailed instructions for contacting DCMA Transportation for "DCMA Administered" contracts, including website addresses and email for assistance, emphasizing the need for pre-shipment contact to avoid frustration and additional expenditures.
• Transportation Funds: Details Purchase Instrument Line LOA, First and Second Destination Transportation Account Codes, and FMS LOA.
• Ship To Information: Lists multiple line items (0001 through 0005) with NSNs/Pseudo NSNs, indicating shipments to DLA Distribution Warner Robins and other locations, with specific addresses and markings.
• Other Transportation Data: Includes contact information for Glenn A. Carter of 406 SCMS/GULAA.

This form is crucial for bidders to understand the required shipping terms (F.O.B. Origin or Destination), relevant Federal Acquisition Regulation (FAR) clauses, and the mandatory procedures for coordinating shipments with DCMA. The detailed "Ship To" information, including addresses and item numbers, is essential for accurate proposal preparation and logistical planning. Bidders must adhere to the specified transportation instructions and contact DCMA as directed to ensure compliance and avoid potential cost increases.

Statement of Work (SOW) / Performance Work Statement (PWS)

This Performance Work Statement (PWS) outlines the services required for the overhaul of C5 Nose Landing Gear (NLG) Door Actuator Assemblies. The objective is to ensure these critical safety items maintain a mission-capable status, thereby increasing aircraft availability and flexibility for the Warfighter.

• Overhaul of C5 NLG Door Actuator Assemblies (NSN 1680-01-237-0230, 1680-01-237-0231, 1680-01-160-6519, 1680-01-160-6520).

• Provide all necessary resources for inspection, overhaul, and testing to meet contract delivery schedules.

• Deliver overhauled assets on time, with the capability to activate a shortened delivery schedule for Mission Impaired Capability Awaiting Parts (MICAP) and Surge requirements.

• Overhauled assets must be serviceable and tested to Original Equipment Manufacturer's (OEM) Acceptance Test Procedures (ATPs).

• Provide accurate and timely data reporting on unit overhaul status.

• Submit monthly reports detailing units on hand, in work, and stage of overhaul by serial number, as per Contract Data Requirements List (CDRL).

• Quality of Overhaul: Assets must be overhauled in accordance with AF Technical Manual Overhaul Instructions, Technical Order (TO) 9H2-3-77-3.

• Overhauled assets must pass DCMA inspection with no more than two failures per contract year.

• Minimum 95% of overhauled assets must pass initial inspection; remaining 5% (or less) must pass on the second attempt.

• No more than one (1) Product Quality Deficiency (PQDR) and/or Quality Deficiency Report (QDR) per contract year.

• Period of Performance: Five (5) years, consisting of one (1) base year and four (4) one-year ordering periods.

• Place of Performance: Contractor's facility.

• Government Property: Contractor is responsible for Government property in accordance with FAR and DFARS. Reporting of Government Property is required via the GFP Module in PIEE.

• Contract Data Requirements List (CDRL): Various reports are required, including Government Property Inventory Report, Commercial Asset Visibility (CAVAF) report, Contract Depot Maintenance (CDM) Monthly Production Report, Accident Incident Report, Request for Variance (RFV), and IUID Marking Plan.

• Supply Chain Risk Management (SCRM): A SCRM plan must be provided, addressing continuity of operations, foreign influence, cybersecurity, obsolete parts, and surge requirements.

• Safety: Contractor must comply with Government Safety and Health regulations and report mishaps.

• Quality Program: Contractor must establish and maintain a quality program compliant with FAR 52.246-11 and ISO 9001:2000.

Form / Attachment / Pricing Sheet

This document, titled "GFP Attachment," details Government Furnished Property (GFP) that has been provisioned. It serves to inform potential bidders about specific equipment that will be provided by the government as part of the contract.

• Attachment Information: Indicates this is a "Contract Award" with an attachment date of 2026-01-05.
• Provisioned Items: Lists four distinct "Provisioned Item" line numbers.
  • Each line item specifies:
    • Item Name and Description (e.g., Actuator, Electro-mechanical)
    • NSN, CAGE Code, Part Number, and Model Number
    • Whether it is Serially Managed (all listed as 'No')
    • Property Classification (all listed as 'Reparable')
    • Quantity (48 units for each item)
    • Unit of Measure ('Each')
    • Unit Acquisition Cost (ranging from 67922.19 to 115336.43)
    • Use As-Is (all listed as 'true')
    • Upgradable? (all listed as 'No')
    • Delivery Date, Duration, Time Unit, and Delivery Event (details not fully specified for all, but indicate delivery is expected).

This attachment is crucial for bidders as it outlines specific government-furnished equipment (actuators) that will be provided. Bidders need to understand the quantity, type, and associated costs of this GFP to accurately assess their proposal, plan for integration, and ensure they can meet the contract requirements with the provided assets.

Solicitation / RFP / RFQ

This document is a solicitation (FA8538-26-R-0012) for the overhaul and repair of aircraft actuators, specifically for the C-5 Nose Landing Gear Door Actuation System. It outlines a requirements contract with a basic 12-month period and four subsequent 12-month ordering periods.

The solicitation details specific line items for the overhaul of RH and LH Actuator Assemblies (NSNs: 1680-01-160-6519 UC, 1680-01-160-6520 UC, 1680-01-237-0230 UC, 1680-01-237-0231 UC). It also includes line items for "Beyond Economical Repair" (BER) for these same NSNs. Each line item specifies the quantity, unit price, and required delivery timeframe (e.g., *45 Calendar Days).

• Contract Type: Requirements Contract

• Period of Performance: Basic 12-month period plus four (4) annual 12-month ordering periods.

• Estimated Value: Not explicitly stated, but includes "Best Estimated Quantities" (BEQ) for each contract line item.

• Proposal Submission Deadline: 17:00 local time on 20-JUL-2026.

• Evaluation Criteria: Lowest Price Technically Acceptable (LPTA) methodology. Award will be made to the responsible offeror whose proposal is technically acceptable, conforms to solicitation requirements, and provides the best value.

• Technical Evaluation Subfactors:

  • Nose Landing Gear Door Actuator Assembly Overhaul Experience
  • Quality System (ISO 9001 or equivalent certification required)

• Price Evaluation: Evaluated for completeness, reasonableness, balanced pricing, and Total Evaluated Price (TEP).

• NAICS Code: 336413

• Size Standard: 1,250 number of employees

• The solicitation includes various clauses related to small business concerns, including subcontracting plans.

• The document references numerous attachments and exhibits, including a Performance Work Statement (PWS) and Contract Data Requirements Lists (CDRLs).

• Specific instructions for proposal format, submission, and communication are provided in Section L.