CAP,VALVE
Overview
Buyer
Place of Performance
NAICS
PSC
Set Aside
Original Source
Timeline
Qualification Details
Fit reasons
- NAICS alignment with historical contract wins in similar service areas.
- Scope strongly matches core technical capabilities and delivery model.
Risks
- Past performance thresholds may require one additional teaming partner.
- Potential clarification needed on staffing minimums before bid/no-bid.
Next steps
Validate eligibility requirements, assign capture owner, and schedule partner outreach to confirm teaming strategy before submission planning.
Quick Summary
The Department of the Navy, specifically NAVSUP Weapon Systems Support Mechanicsburg, is soliciting proposals for CAP,VALVE components, specifically a Bonnet for a 1-inch globe valve. This is a Total Small Business Set-Aside opportunity. The material is designated as "SPECIAL EMPHASIS material" due to its critical use in shipboard systems. Proposals are due by April 2, 2026, at 8:30 PM EDT.
Scope of Work
This requirement is for the provision of a bonnet for a 1-inch globe valve, manufactured in accordance with NAVSEA drawing 803-5959306, item 2, part number 803-5959306-T-2XX-02 and ER5959306E3. Key requirements include:
- Material: ASTM-B348, grade 2; or ASTM-B381, grade F-2.
- Testing: Ultrasonic Inspection (for forged bonnets) and Dye Penetrant Inspection per T9074-AS-GIB-010/271 and MIL-STD-2035.
- Threads: Internal threads must be cut, not cold-formed, and inspected per FED-STD-H28 series or ASME B1 series.
- Quality System: Contractors must maintain a quality system in accordance with ISO-9001, ISO-10012, or ANSI-Z540.3 with ISO-17025, or MIL-I-45208 with MIL-STD-45662.
- Traceability: Strict traceability and certification requirements for all materials, including chemical and mechanical analysis, are mandated for Level I/SUBSAFE systems.
- Welding/Brazing: Specific procedures and qualifications are required for welding and brazing, with prior approval needed for procedures and qualification data.
- Configuration Control: Contractors must maintain total equipment baseline configuration and submit Engineering Change Proposals (ECPs) for Class I or II changes.
Contract & Timeline
- Type: Solicitation
- Set-Aside: Total Small Business
- Response Due: April 2, 2026, 8:30 PM EDT
- Published: February 25, 2026
- Amendments: The solicitation close date has been extended multiple times due to delays in posting drawings, with the latest amendment extending the deadline to April 1, 2026, 4:30 PM Local Time. The system response date is April 2, 2026.
Evaluation
NAVSUP WSS Mechanicsburg will consider past performance in the evaluation of offers in accordance with FAR 13.106(a)(2).
Additional Notes
- Drawings: Access to drawings must be requested through SAM.gov. For NOFORN and/or Naval Nuclear Propulsion Information, a security agreement form must be downloaded from SAM.gov and emailed to the POC.
- Submissions: Certification data must be submitted to Portsmouth Naval Shipyard via Wide Area Work Flow (WAWF) prior to each shipment of material. The Electronic Contractor Data Submission (ECDS) system is available for certain data submissions and waiver requests.