Classroom Furniture

Two-person modular classroom desk; 60-inch L x 24-inch D x 29-inch H. Desktop should be a mahogany color wood finish with black open C-Leg design. The legs should have wire routing system in the legs to protect the connectors beneath the desk. Each desk will include a wire management system which will consist of two grommets with installed powerup modules; one in the far left and one in the far-right side. In addition, desk should include a round grommet in the center. All popup modules and grommets will be located/installed above the cable management tray. Due to the amount of equipment being placed on the desk and the flooring installed in the classrooms, flip top desks and wheeled desks are not acceptable. Desks may be set up in tandem (connected to each other) or individually. Each desk will include a removable cover with a wire track installed to adequately route the power and network cable to each desk. The removable cover will allow access to the wires from either the front or back, should the desks be connected in a row. Pop-up power modules should be retractable to allow for storage when not in use. Each power module will include no less than 2 ? three prong outlets and one Cat-6 network connections for a total of 4 - three prong outlet and 2 Cat-6 network connections per desk. Jumper kits will allow a continuous power connection from desk to desk. Each desk should include a power infeed kit which allows the desk to connect to the floor and/or wall with a 3-prong plug. A patterned electrical system will provide two additional three prong outlets for each desk. System will be installed on the underside of the desk. Desks and accessories will be installed in two separate classrooms. 30 desks per classroom. Both classrooms are in the same building. Delivery will be to Fort Novosel, Alabama.