6130-01-272-8813 (26-R-0104)

Solicitation / RFP / RFQ

This solicitation, SPRHA4-26-R-0104, is for the manufacturing of Current-Carrying Wiring Devices. The acquisition is restricted to qualified sources: INNOVATIVE SOLUTIONS & SUPPORT INC and LOCKHEED MARTIN CORPORATION.

• Procurement of "Current-Carrying Wiring Device Manufacturing".

• Specific item details include NSN: 6130-01-272-8813 WF, Manufacturer: OEUWO, Part Number: 2816638-2.

• The acquisition involves a "Power supply for the F-16 Digital Flight Conrtol Computer."

• Item No. 0001: Quantity 109 EA.

• Item No. 0002: Not Separately Priced (NSP), Quantity 1 LO.

• Counterfeit Prevention Plan is required.

• Packaging and Marking requirements are detailed, including MIL-STD-130 and MIL-STD-129.

• Supply chain traceability documentation is required.

• Unique Item Identification (UID) is required.

• Contract Type: Firm Fixed Price.

• Period of Performance: Not explicitly stated, but delivery is expected within 120 calendar days from the date of award.

• Estimated Value: Not stated.

• Offers are due by 26-JAN-2026 at 2:00 PM.

• Offers will be received at the issuing office.

• Late offers are subject to late proposal provisions.

• Evaluation criteria are not detailed in this document, but "Price or Cost" is listed as the primary evaluation factor, with all other factors combined being "Significantly Less Important than Cost or Price."

• This acquisition is restricted to qualified sources (INNOVATIVE SOLUTIONS & SUPPORT INC and LOCKHEED MARTIN CORPORATION).

• Solicitation approved for U.S. Contractors Only.

• Early and partial deliveries are acceptable at no increase in cost to the government.

• Less than a truckload shipment is acceptable and authorized.

• The document references numerous FAR and DFARS clauses and provisions.

Form / Attachment / Pricing Sheet

This document is an Engineering Data List (EDL) that specifies engineering drawings and related data required for the "POWER SUPPLY" end item, identified as F-16. It details the manufacturer, reference number, and the specific forms or documents associated with the engineering data.

• Manufacturer: LOCKHEED MARTIN CORPORATION (CAGE 81755)
• End Item: F-16
• Noun: POWER SUPPLY
• NSN: 6130012728813WF
• Engineering Data: HILL AFB FORM 462 (Document Number)
• Revision: 3
• Date: 19 SEP 2023
• Standard Engineering Text: "RELEASE OF THIS DATA TO A FOREIGN OWNED, CONTROLLED OR INFLUENCED COMPANY IS DEPENDENT UPON THE APPROVAL OF THE FOREIGN DISCLOSURE OFFICE."

This EDL indicates that specific engineering drawings and data (HILL AFB FORM 462) are associated with this opportunity. Bidders should review this list to understand the engineering documentation requirements and availability, particularly noting the restriction on foreign disclosure of data.

Form / Attachment / Pricing Sheet

This document is a Contract Data Requirements List (CDRL) that specifies data items to be delivered by the contractor. Specifically, it details the requirements for a Counterfeit Prevention Plan (CPP).

• Data Item Number: A001
• Title: Counterfeit Prevention Plan (CPP)
• Authority: DI-MISC-81832
• Requiring Office: 416 SCMS/GUEAA
• Submission Deadline: NLT thirty (30) calendar days after contract award.
• Format: Contractor Format Acceptable.
• Distribution: Via e-mail to alan.christenson.1@us.af.mil.
• Export Control: Distribution Statement "D" and Export Control Warning are required, as per DoD Instruction 5230.24.

This CDRL outlines a mandatory deliverable for the contractor: a Counterfeit Prevention Plan. Bidders should note the specific requirements for the plan's content, submission deadline, and distribution. This indicates that the opportunity likely involves hardware or components where counterfeit prevention is a critical concern.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the requirements for preservation, packaging, and marking of materials for military use, ensuring compliance with various Department of Defense (DoD) standards and regulations.

• Adherence to AFMC Form 158, Packing Requirements.

• Utilization of MIL-STD-2073-1 for military packaging development, including special packaging instructions and hazardous materials.

• Application of ASTM D3951 for commercial packaging of specific commodities.

• Compliance with MIL-STD-129 for military marking, labeling, and shipment planning.

• Adherence to International Standards for Phytosanitary Measures (ISPM 15) for wood packaging material used in international trade.

• Application of electrostatic discharge (ESD) protection procedures (MIL-STD-2073-1, MIL-HDBK-773, ANSI/ESD S20.20, ESD TR20.20, MIL-STD-129) for sensitive electronic components.

• Use of Item Type Storage Code (ITSC) as required.

• Application of MIL-STD-147 for palletized unit loads and MIL-STD-648 for specialized shipping containers.

• Strict compliance with regulations for preparing, labeling, certifying, and shipping hazardous materials, including ICAO, CFR Title 49, IATA, and IMDG codes.

• Preparation and submission of Safety Data Sheets (SDS) per FED-STD-313.

• Safeguarding and proper disposition of reusable shipping containers.

• Reporting discrepancies via Web Supply Discrepancy Report (WebSDR).

• Compliance with specified DoD Military Standards, ASTM, ANSI, and other relevant regulations.

• Proper identification and marking of all materiel.

• Correct preparation and labeling of hazardous materials.

Not explicitly stated in this document, but implied to be for the duration of the contract and at locations where packaging and shipment occur.

• Packaging must meet "DOT specification or a United Nation (UN) specification" for hazardous materials.
• A Competent Authority Approval (CAA) may be required for hazardous material shipments.
• Contractors must use the ASSIST website to access specifications and standards.
• Contractors may use the SPIRES website for Special Packaging Instruction drawings.

Form / Attachment / Pricing Sheet

This document, "ENGINEERING DATA REQUIREMENTS (ATTACHMENT "A")", provides specific instructions and requirements for the manufacture of a Digital Flight Control Computer Assembly (Part Number: 16VC026-103, NSN: 6130-01-272-8813WF) for the F-16 aircraft.

• Manufacturing Instructions: Details requirements for manufacturing the specified assembly.
• Specifications and Standards: References applicable military specifications and standards, noting that these will not be furnished in the bid set. Substitutions require prior engineering approval.
• Unique Identification (UID): Mandates UID application per MIL-STD-130.
• Soldering Requirements: Specifies the use of MIL-STD-2000 for aircraft soldering, with J-STD-001 as an alternative if it meets or exceeds MIL-STD-2000.
• Lead-Free Solder Policy: Outlines strict requirements and notification procedures regarding the use of lead-free solder and components in military electronic products due to flight safety and national security concerns. It emphasizes that no lead-free formulation has matched the reliability of standard leaded solders, and continued use of leaded solders is required unless a suitable, reliable lead-free alternative is identified and approved.
• Counterfeit Prevention Plan (CPP): Requires contractors to establish and document policies and procedures to avoid, detect, mitigate, and disposition counterfeit electronic parts. This includes applicability, definitions, parts availability, procurement policies, risk assessment, detection and avoidance responsibilities, testing and verification, configuration identification and traceability, notification and reporting procedures, and training requirements. The CPP must align with standards like SAE 5553 and relevant DOD directives.

This attachment is critical for bidders intending to manufacture the Digital Flight Control Computer Assembly. It details technical requirements, material specifications, critical compliance mandates (like lead-free solder policies and counterfeit prevention), and the need for specific documentation (like a CPP). Bidders must carefully review these requirements to ensure their proposals and manufacturing processes meet all stipulated conditions.