RADOME, NSN: 1560011798343 (26-R-0205)

Form / Attachment / Pricing Sheet

This document is an Engineering Data List (EDL) that specifies the engineering drawings, data requirements, and related materials necessary for the F-16 RADOME end item. It serves as a reference for contractors to understand the technical documentation and components associated with this part of the F-16 aircraft.

• Lists specific engineering drawing numbers, accomplishment document numbers, and their revision levels.
• Identifies associated materials, including adhesives, sealants, resins, and fiberglass components, often referencing qualified material lists (QML) or qualified products lists (QPL).
• Includes codes indicating the furnished method for each item (e.g., furnished with solicitation, government document, contractor must acquire).
• Notes specific requirements such as unique identification labels, interpretation formats, and finish specifications.

This EDL is crucial for bidders to identify all required technical documentation and materials for the F-16 RADOME. It helps in understanding the scope of work, potential material sourcing, and compliance requirements related to the specific drawings and specifications listed. Bidders should review this list to ensure they can meet all specified engineering data and material requirements as part of their proposal preparation.

Form / Attachment / Pricing Sheet

This document, "ENGINEERING DATA REQUIREMENTS (ATTACHMENT "A")", provides specific instructions and requirements for the manufacture of a "NOSE RADOME ASSY - FS 5.00 TO FS 65.00" (Part Number: 16VB008-6, National Stock Number: 1560-01-179-8343WF).

• Specifies that military specifications/standards will not be furnished in the bid set.
• Lists applicable specifications and standards to be used, noting that superseded data will not be furnished unless indicated.
• States that listed sources/materials are the only ones permitted, and substitutions require prior approval from OO-ALC Cognizant Engineering Activity (416 SCMS).
• Prohibits deviations from specifications in control drawings without prior approval.
• Mandates the use of MIL-STD-130 in lieu of FPS-3008.
• Requires IUID marking per Air Force Drawing 200733803-01, with a diagram showing the location for the label.

This attachment is crucial for bidders to understand the exact specifications, materials, and marking requirements for the "NOSE RADOME ASSY". It outlines the approved part number, stock number, and critical manufacturing instructions, including the necessity for specific markings and the process for obtaining approval for any substitutions or deviations. Failure to adhere to these requirements could impact proposal compliance and manufacturing feasibility.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the requirements for preservation, packaging, and marking of materials for the Department of Defense (DoD), adhering to various military standards, ASTM standards, and government regulations.

• General Adherence: Offerors must comply with AFMC Form 158, "Packing Requirements," and relevant DoD Military Standards, ASTM International, ANSI, Data Item Descriptions, DoD specifications, FAR/DAR Clauses, and marking requirements.
• Military Packaging (MIL-STD-2073-1): Develop military packaging using decision charts and adhere to specified requirements, including special packaging instructions for specific item categories and hazardous materials.
• Commercial Packaging (ASTM D3951): Apply preservation, packaging, packing, and markings for specific commodities as prescribed.
• Military Marking (MIL-STD-129): Use MIL-STD-129 for uniform military marking, labels, and shipment planning. Ensure proper application of DD Form 1574 or 1574-1 tags/labels indicating material condition.
• Phytosanitary Measures (ISPM 15): Comply with international wood packaging material regulations for international trade, including approved treatments for wood pallets, crates, etc.
• Electrostatic Discharge (ESD) Protection: Adhere to procedures for packing, marking, and labeling materials sensitive to electrostatic forces, referencing MIL-STD-2073-1, MIL-HDBK-773, ANSI/ESD S20.20, ESD TR20.20, and MIL-STD-129.
• Item Type Storage Code (ITSC): Comply with ITSC requirements as a packaging data element.
• Palletized Unit Loads (MIL-STD-147): Apply provisions for preparing and shipping bonded palletized unit loads.
• Specialized Shipping Containers (MIL-STD-648): Adhere to design criteria and tests for specialized shipping containers.
• Hazardous Materials: Ensure shipments are prepared, labeled, certified, and comply with ICAO, CFR Title 49, IATA, IMDG Code, and AFMAN 24-604. Packaging must meet DOT or UN specifications. Competent Authority Approval (CAA) may be required.
• Safety Data Sheets (SDS): Prepare and submit SDS IAW FED-STD-313.
• Reusable Containers: Safeguard and manage reusable shipping containers according to AFMC Form 158 requirements.
• Reporting Discrepancies: Use Web Supply Discrepancy Report (WebSDR) for reporting improperly packed assets.

Not explicitly stated in this document, but implied to be for the duration of the contract.

• Documentation: Adherence to Contract Data Requirements List (CDRL) for documentation.
• Access to Standards: Use of the ASSIST website for specifications, standards, and data item descriptions.
• SPIRES: Contractors can use the Special Packaging Instructions Retrieval & Exchange System (SPIRES) website for item packaging requirements.
• Contact Information: Provided for AFSC 406 SCMS/GULAA.

Solicitation / RFP / RFQ

This solicitation (SPRHA4-26-R-0205) is for the procurement of "Other Aircraft Part and Auxiliary Equipment Manufacturing." The acquisition is restricted to qualified sources: GENERAL DYNAMICS MISSION SYSTEMS and LOCKHEED MARTIN CORPORATION. Interested parties must submit a qualification package to become a qualified source.

• The primary item is a RADOME for the F-16, identified by NSN: 1560-01-179-8343.

• Quantity: 15 units.

• Early and partial deliveries are acceptable at no increase in cost to the government.

• Less than a truckload shipment is acceptable.

• Manufacturing Qualification Requirement is detailed in an attached document.

• Supply chain traceability documentation is required.

• Items shall be marked in accordance with MIL-STD-130 and packaged/marked per MIL-STD-129/ASTM-D-3951.

• IUID Required: Yes.

• Physical Item Markings: IAW MIL-STD-130.

• Serial Number Required.

• Contract Type: Firm Fixed Price.

• Period of Performance: Delivery dates range from May 2026 to April 2027, with some proposed deliveries extending to July 2027.

• Estimated Value: Not explicitly stated, but the item quantity is 15.

• Proposal Submission Deadline: March 2, 2026, 2:00 PM.

• Offers are subject to late proposal provisions.

• Evaluation criteria: Price or Cost is the most important factor, significantly more important than all other factors combined.

• Submission of Invoices and Receiving Reports: Via Wide Area WorkFlow (WAWF).

• This acquisition is restricted to qualified sources (GENERAL DYNAMICS MISSION SYSTEMS and LOCKHEED MARTIN CORPORATION).

• NAICS Code: 336413, Size Standard: 1,250 employees.

• Associated Document: FD20202600205.

• The solicitation includes numerous FAR and DFARS clauses related to contract administration, packaging, inspection, deliveries, payment, representations, and certifications.

Form / Attachment / Pricing Sheet

This document outlines the Manufacturing Qualification Requirements for the RADOME (P/N: 16VB008-6, NSN: 1560-01-179-8343) for the F-16 application. It details the criteria and processes potential sources must satisfy to become a qualified supplier.

• Prequalification Notice/Sources Sought: Notification to the government of intent to qualify.
• Facilities, Testing, and Inspection Capabilities: Offerors must certify they possess or have access to necessary resources and make them available for government inspection.
• Data Verification: Requires a complete data package, including specific drawings (16VB008-6) and specifications (16ZB002), and potentially applicable procedures and drawings.
• Manufacture/Process Verification: The item must be manufactured to conform to government requirements, including Unique Identification (UID) per DFARS 211.274. Offerors must provide quality, performance, and environmental evaluation data at their own expense.
• Test and Evaluation/Verification: Offerors must prepare and submit a qualification test plan/procedure for government approval. A complete test report is required post-qualification testing for review and approval prior to contract award. The government may witness testing.
• Qualification Article Verification: A pre-contract award qualification article must be provided at the offeror's expense for form, fit, and function evaluation.
• Qualification Requirement Cost Estimate: Estimated costs for testing and evaluation are $1,725,000.
• Qualification Time Completion Estimate: Estimated engineering support activity completion is 730 days.
• Qualification Time Limitation: Offers will be considered if the offeror can demonstrate they meet or can meet standards before the award date; award will not be delayed for qualification.
• Evaluation of Proposals Not Previously Qualified: Full qualification is required for contract eligibility before the award date.
• Source Qualification Waiver Requirements: Criteria for applying for a waiver of qualification requirements are outlined (QWC1, QWC4, QWC6).

This document is critical for any vendor seeking to supply this RADOME. It outlines the mandatory steps, costs, timelines, and requirements for becoming an approved source. Bidders must understand these qualification processes, including the estimated costs and timeframes, to determine their ability to participate in future solicitations for this item. Failure to meet these qualification requirements will make a vendor ineligible for contract award.

Form / Attachment / Pricing Sheet

This document is a Special Packaging Instruction (SPI) for the item "RADOME," identified by SPI Number F01-041-0480. It details the specific requirements for packaging, preservation, marking, and international trade compliance for this item.

• Preservation: Specifies methods for military preservation (IAW MIL-STD-2073-1) and notes that preservative is not applicable.
• Packing: Outlines packing requirements based on MIL-STD-2073-1, including serviceability and unserviceability methods, and specifies packing levels (Level A and Level B).
• Marking: Details marking requirements IAW MIL-STD-129, including the SPI number and a note about not destroying reusable containers.
• International Standards: Addresses Revision of ISPM No. 15 for wood packaging material, requiring de-barked wood and heat treatment (HT) for international shipments.
• Bill of Materials: Lists specific components, quantities, descriptions, and material specifications required for constructing the packaging, including various bolts, nuts, spacers, supports, and base/skid materials.
• Dimensions & Weights: Provides detailed internal and external dimensions, gross cubic feet, gross weight, and design fragility for the packaging.
• Revisions: Notes an update to include a distribution statement and destruction notice.

This document is critical for bidders to understand the exact specifications for packaging the "RADOME" item. It dictates the materials, methods, and compliance standards that must be met for shipment, particularly for international trade. Adherence to these instructions is essential for successful contract fulfillment and avoiding potential issues related to packaging integrity and compliance.