Construction of F16 Mission Training Center

Specifications

This document contains detailed technical specifications for the F-16 Mission Training Center (MTC) at Atlantic City Air National Guard Base. It covers a wide range of construction materials, systems, and installation procedures, emphasizing quality, safety, and performance.

• Concrete: Requirements for cast-in-place concrete, including mix design, properties, durability, placement, and testing.

• Masonry: Specifications for unit masonry, including brick, concrete masonry units, grout, mortar, and accessories.

• Steel: Requirements for structural steel, steel tubing, pipe, bolts, nuts, washers, and miscellaneous metal fabrications.

• Thermal and Moisture Protection: Details on insulation, vapor retarders, and elastomeric sheet waterproofing.

• Building Enclosure: Air barrier systems, including testing, materials, and installation.

• Roofing Systems: Standing Seam Roofing Systems (SSRS).

• Firestopping & Sealants: Specifications for firestopping and joint sealants.

• Doors & Frames: Requirements for steel, aluminum, and wood doors and frames, including sound control assemblies.

• Glazing & Louvers: Specifications for glazing and metal wall louvers.

• Finishes: Schedules for finishes, supports for gypsum board, gypsum board, ceramic/quarry/glass tiling, acoustical ceilings, resilient flooring, and fuel resistive resinous flooring.

• Signage: Interior and exterior signage requirements.

• Accessories & Protection: Toilet compartments, wall and door protection, toilet accessories, fire extinguishers, cell phone lockers, manufactured canopies.

• Fall Protection: Fall protection systems, including rooftop cable systems.

• Fire Protection: Wet pipe sprinkler systems and fire pumps.

• Temporary Facilities & Controls: Provisions for construction facilities, traffic control, site security, and environmental controls.

• Commissioning: Building commissioning process, team, and documentation.

• Quality Control: Contractor's quality control program, submittals, inspections, testing, and documentation.

• Adherence to numerous industry standards (ASTM, ACI, AISC, AWS, etc.) and government regulations (UFGS, EM 385-1-1, OSHA, EPA, etc.).

• Emphasis on sustainability, including recycled content, low-VOC materials, and energy efficiency.

• Detailed waste management procedures.

This document provides comprehensive technical details crucial for bidders to understand the scope of work, material requirements, performance standards, and quality assurance measures for the F-16 MTC construction project. Reviewing the specific sections relevant to a bidder's scope is essential for accurate bidding and successful project execution.

Amendment / Modification

This addendum (Addendum No. 1) modifies the original contract documents dated May 15, 2025. It includes updated geotechnical boring information.

• Drawings:
  • Drawing B-100 (Geotechnical - Boring Location Plan) has been revised and re-issued in its entirety.
  • Drawing B-104 (Geotechnical - Boring Logs Sheet 4 of 4) has been revised and re-issued in its entirety.

Bidders are required to acknowledge receipt of this Addendum on the Bid Form. Failure to do so may subject the bidder to disqualification.

Amendment / Modification

This addendum (Addendum No. 3) modifies the original contract documents dated May 15, 2025, for the F-16 Mission Training Center (MTC) at Atlantic City Air National Guard Base, New Jersey. It consists of four pages and includes updated specifications and drawings.

Key changes include:

• Specifications Revised:

  • Specification Section 00 22 13.00 20 – SUPPLEMENTARY INSTRUCTIONS TO OFFERORS, dated November 5, 2025, has been revised and re-issued in its entirety.
  • Specification Section 32 92 19 – SEEDING, dated November 5, 2025, has been revised and re-issued in its entirety.

• Drawings Revised: Numerous drawings have been revised and re-issued in their entirety, with dates of revision generally being November 5, 2025. These include:

  • Cover Sheet (G-001)
  • Civil Site Layout Plans (CS101, CS102)
  • Civil Utility Layout Plans (CU101, CU102)
  • Civil Site Details (C-504)
  • Foundation Details (SB502)
  • Floor Plans (AE101)
  • Mechanical Yard Screen Wall Plan and Details (AE102)
  • Section Details (AE501)
  • Furniture and Equipment Plan (IF101)
  • Fire Protection Enlarged Plans and Sections (FX401)
  • Electrical Interior Lighting (EL101)
  • Ground Floor Electrical Power Plan (EP101)
  • Ground Floor Mechanical Power Plan (EP102)
  • One-Line Diagrams (EP600)
  • Panel Schedules (EP700, EP703)
  • Telecommunications Special Systems Ground Floor Plan (EY101)

All listed specifications and drawings have been revised and re-issued.

Bidders must acknowledge receipt of this Addendum in the space provided on the Bid Form to avoid disqualification. The changes primarily involve updated technical details and drawings, superseding previous versions. No changes to proposal deadlines or evaluation factors are explicitly mentioned in this addendum.

Form / Attachment / Pricing Sheet

This document, Exhibit A, is a Performance Relevancy Questionnaire that bidders must complete as part of their proposal submission. It is designed to gather detailed information about the bidder's past performance on relevant projects to assess their capability and suitability for the current opportunity.

Part 1: Project-Specific Information

• Bidders must prepare up to three (3) questionnaires for selected projects.
• Projects must be ongoing or at least 70% complete, and completed no earlier than 5 years prior to the solicitation issue date.
• Required information includes:
  • Offeror's Name
  • Project/Contract Title
  • Contract Specifics (Number, Original/Current Value, Reason for Differences)
  • Completion Dates (Original, Current Schedule, Estimated/Final)
  • Primary cause for Contract Modifications
  • Detailed description of work performed, including similarity to the proposed effort (construction methods, cost magnitude, complexity, client type, sustainability requirements, location).
  • Specific elements of work performed by the bidder.
  • Information on major subcontractors used, their work, and whether they will be used on this project.
  • Technical areas uniquely relevant to this project, including sustainability requirements (e.g., USGBC LEED®).
  • Key personnel intended for this solicitation's project, their previous roles, and proposed roles.
  • Justification for the relevance of the work (very relevant, relevant, semi-relevant).
  • Point of Contact for Owner/Government agency Contracting Officer and/or inspector (with phone and facsimile numbers).

Part 2: Additional Offeror Information

• Compliance with FAR clause 52.219-8 Utilization of Small Business Concerns.
• Information on problems encountered on relevant projects and corrective actions taken.
• List of projects within the last five (5) years assessed Liquidated damages (or a statement of none).
• List of projects within the last five (5) years terminated (or a statement of none), with explanations.
• Proof of Experience Modification Rate (EMR) for compliance with Safety Standards.

This questionnaire is critical for demonstrating past performance and relevant experience. Bidders must carefully select projects and provide detailed, frank, and concise information as requested. The quality and relevance of the information provided will be a significant factor in the evaluation of proposals. Failure to provide complete and accurate information may negatively impact the evaluation.

Form / Attachment / Pricing Sheet

This document, Exhibit C, is a Past Performance Reference Questionnaire package that offerors must prepare and submit to the owners of projects listed in their Exhibit A "Performance Relevancy Questionnaires." The purpose is to gather feedback on the offeror's past performance, which will be used by the government evaluation team.

• Instructions to Offeror: Details on preparing and submitting the questionnaire package, including a cover letter and the questionnaire itself.
• Sample Transmittal Letter: A template for the offeror to send to references, explaining the purpose and providing submission instructions.
• Past Performance Questionnaire (Exhibit C): A detailed form for clients to rate the contractor's performance across various categories including Quality, Schedule/Timeliness, Customer Satisfaction, Management/Personnel/Labor, Cost/Financial Management, Safety/Security, and General performance. It includes adjective ratings (Exceptional, Very Good, Satisfactory, Marginal, Unsatisfactory, Not Applicable) and definitions.
• Submission Instructions: Completed questionnaires should be sent directly to the Contracting Office at 177fw.contracting.org@us.af.mil by a specified deadline.

Offerors must use this document to solicit feedback from their past clients regarding their performance on previous contracts. This feedback is crucial for the government's evaluation of the offeror's past performance as part of the proposal submission. Bidders need to ensure these questionnaires are sent out promptly and returned by the specified deadline to be included in their proposal evaluation.

Amendment / Modification

This addendum (No. 4) modifies the original contract documents dated May 15, 2025, for the PN AQRC 189015 - NJ ANG F-16 MTC (FLIGHT SIMULATOR FACILITY) project.

• Drawings:

  • Drawing C-001 (CIVIL – LEGEND, GENERAL NOTES, AND ABBREVIATIONS) has been revised and re-issued. The revised drawing is dated May 27, 2026, and replaces the version dated May 15, 2025.
  • Drawing GC100 (CIVIL – PROJECT LOCATION AND VICINITY MAP) has been revised and re-issued. The revised drawing is dated May 27, 2026, and replaces the version dated May 15, 2025.

• Bidders are required to acknowledge receipt of this Addendum on the Bid Form. Failure to do so may result in disqualification.

• Items in this addendum take precedence over the original bid documents. Items not specifically revised remain in effect.

Solicitation / RFP / RFQ

This solicitation is a Request for Proposals (RFP) to award a single Firm Fixed-Price contract for non-personal services to construct an F-16 Mission Training Center (MTC) facility at the 177th Fighter Wing in Egg Harbor Township, NJ. The project is set aside 100% for small businesses. The North American Industry Classification System (NAICS) code is 236220, with a small business size standard of $45,000,000. The estimated magnitude of construction is over $10,000,000.

• Construction of an F-16 Mission Training Center facility.

• Provision of all plant, labor, transportation, materials, tools, equipment, appliances, and supervision necessary for the construction.

• Work must strictly adhere to Drawings and Specifications dated May 15, 2025, and Addendums No. 1 through 4.

• Compliance with applicable codes, local, state, and federal regulations, and industry standards.

• Contract Type: Firm Fixed-Price (FFP).

• Period of Performance: 30 calendar days for performance to begin after award/notice to proceed, and 425 calendar days for completion.

• Performance and Payment Bonds: Required (YES).

• Bid Bond: Required.

• Proposal Submission Deadline: July 7, 2026, at 01:00 PM local time.

• Submission Method: Electronic via email to 177fw.contracting.org@us.af.mil. No other methods will be accepted.

• Evaluation Factors: Best Value award based on Technical, Past/Present Performance, and Price. Technical and Past/Present Performance are approximately equal in importance, and combined non-price factors are approximately equal to the Price Factor.

• Pre-Proposal Conference: June 10, 2026, at 1:30 PM at the 177th FW, Building 410 classroom. Site visit to follow.

• Questions Deadline: July 1, 2026, at 1:00 PM EST.

• This solicitation is set-aside 100% for small businesses.

• Offerors must register for the pre-proposal conference and site visit.

• All questions must be submitted via email.

• Offerors must register in the System for Award Management (SAM).

• Brand Name requirement for Advantor equipment (Access Control System).

Other / Unclassified

This document is Volume Two (Division 22-33) of the Technical Specifications for the F-16 Mission Training Center (MTC) at the New Jersey Air National Guard, Atlantic City Air National Guard Base. It details architectural specification responsibilities and consultant specification responsibilities for various divisions, including Procurement and Contracting Requirements, General Requirements, Existing Conditions, Concrete, Masonry, Metals, Wood Plastics and Composites, Thermal and Moisture Protection, Openings, Finishes, Specialties, Equipment, Fire Suppression, Plumbing, Heating Ventilating and Air Conditioning (HVAC), Integrated Automation, Electrical, Communications, Electronic Safety and Security, Earthwork, Exterior Improvements, Utilities, and Insulation.

This document is highly relevant for bidders as it outlines the specific technical requirements and standards for various systems and materials that will be used in the construction of the F-16 Mission Training Center. It details the scope of work for different divisions, performance standards, materials specifications, and installation procedures. Potential bidders can use this document to understand the technical expectations for the project, assess their capabilities, and prepare accurate proposals.

Form / Attachment / Pricing Sheet

This document comprises the "B-3 Final Contract Documents Submission" for the New Jersey Air National Guard - 177th Fighter Wing F-16 Mission Training Center (MTC) project. It includes detailed architectural and structural drawings, as well as specific option line items (OLIs) relevant to the construction scope.

• Project Identification: NEW JERSEY AIR NATIONAL GUARD - 177TH FIGHTER WING F-16 Mission Training Center (MTC), Project Number: AQRC189015, Location: Atlantic City Air National Guard Base - Egg Harbor Township, NJ.
• Submission Date: May 15, 2025.
• Option Line Items (OLIs):
  • OLI #1: Site demo, new bituminous & concrete pavements and striping for west parking area (43 spaces).
  • OLI #2: Resurface and re-stripe bituminous parking pavement and islands for south parking area (64 spaces).
  • OLI #3: Additional masonry veneer on building exterior (alternative to insulated metal wall panel system).
  • OLI #4: Vertical building entry monolith (base bid excludes monolith).
  • OLI #5: Mechanical equipment yard masonry wall (alternative to chain-link fence).
  • OLI #6: Mechanical equipment yard concrete surface (alternative to stone surface).
  • OLI #7: Illuminated unit insignia sign on building exterior (base bid excludes insignia sign).
  • OLI #8: Additional concrete pavements for simulator install (base bid is turf grass).
• Drawings Include: Foundation plans and details, framing plans and details (roof, steel connections, bracing), wall sections and details (exterior/interior, materials, insulation), site and utility information, wind and snow load diagrams, enlarged plans, interior elevations, room finish schedules, and glazing details.

This document is critical for bidders as it provides comprehensive technical specifications and visual details for the project's physical scope. It outlines construction methods, material specifications, site layout, and specific variations through OLIs that require pricing or consideration. Bidders must carefully review the drawings and OLIs to ensure accurate bidding, material take-offs, labor estimates, and successful project execution, ensuring compliance with all design requirements.

Amendment / Modification

This addendum, "Addendum No. 2," dated July 22, 2025, forms a part of the Contract Documents and modifies the Original Documents dated May 15, 2025. Bidders must acknowledge receipt of this Addendum on the Bid Form to avoid disqualification.

This addendum introduces revisions and re-issues of several specifications and drawings. Key changes include:

Specifications:

• Section 01 14 00 – WORK RESTRICTIONS: Revised and re-issued in its entirety.
• ATTACHMENT “K” – Egg Harbor Township Municipal Utilities Authority – APPLICATION FOR CONNECTION TO EXISTING SEWER SYSTEM: Added in its entirety.
• Section 05 50 13 – MISCELLANEOUS METAL FABRICATIONS: Revised and re-issued.
• Section 22 00 00 – PLUMBING, GENERAL PURPOSE: Revised and re-issued.

Drawings:

• Drawing G-002 – SHEET INDEX, VICINITY MAP AND PROJECT LOCATION MAP: Revised and re-issued.
• Drawing CU101 – CIVIL - UTILITY LAYOUT PLAN (BASE BID): Revised and re-issued.
• Drawing CU102 – CIVIL - UTILITY LAYOUT PLAN (OPTIONAL LINE ITEMS - OLIS): Revised and re-issued.
• Drawing CU202 – CIVIL - UTILITY PROFILES SHEET 2: Revised and re-issued.
• Drawing AE101 – FLOOR PLANS: Revised and re-issued.
• Drawing AE104 – ROOF PLANS AND DETAILS: Revised and re-issued.
• Drawing AE207 – NORTH BUILDING ELEVATIONS: Revised and re-issued.
• Drawing AE208 – NORTH BUILDING OLI ELEVATIONS: Revised and re-issued.
• Drawing AE504 – SECTION DETAILS: Added.
• Drawing F-001 – FIRE PROTECTION LEGEND, ABBREVIATIONS AND SCHEMATIC PIPING DIAGRAM: Revised and re-issued.
• Drawing FA101 – FIRE ALARM / MASS NOTIFICATION PLAN: Revised and re-issued.
• Drawing FA601 – FIRE ALARM / MASS NOTIFICATION RISER DIAGRAM: Revised and re-issued.
• Drawing FA701 – FIRE ALARM MASS NOTIFICATION SYSTEM INPUT / OUTPUT MATRIX: Revised and re-issued.
• Drawing P-701 – PLUMBING SCHEDULES: Revised and re-issued.
• Drawing EY101 – TELECOMMUNICATIONS SPECIAL SYSTEMS GROUND FLOOR PLAN: Revised and re-issued.
• Drawing ET101 – TELECOMMUNICATIONS GROUND FLOOR PLAN: Revised and re-issued.

All revised and re-issued documents take precedence over the original bid documents. Items not specifically revised remain in effect. Bidders should ensure they are working with the most current versions of these documents.

Amendment / Modification

This document is Addendum No. 4, dated May 27, 2026, which provides clarifications and additional information related to the "Excess Haul Route" for the New Jersey ANG-177th FW F-16 Mission Training Center (MTC) project.

Key points include:

• General notes provide guidance on contractor responsibilities regarding discrepancies, existing utilities, site conditions, spoil disposal, and haul route usage.

• Specific instructions are given for managing excavated soil, including sampling, analysis, and disposal if contaminated or not retained by the FAA.

• Notification procedures are outlined for encountering unknown utilities and for the installation/uncovering of existing utilities.

• Access to the soil stockpile area requires a specific badging and pre-screening process with associated fees and timelines.

• General Notes (specifically regarding haul routes, spoil disposal, and utility management).

• Abbreviations and Legend (provides definitions for terms and symbols used in the project documents).

• Various civil engineering elements are depicted with symbols and line types.

This addendum primarily provides clarification and procedural information. Bidders should review these updates to ensure full understanding of site logistics, material handling, and coordination requirements, which may impact their bidding strategy and execution plan.

Form / Attachment / Pricing Sheet

This document is a Geotechnical Engineering Report, Revision 01, for the F-16 Mission Training Center at Atlantic City Air National Guard Base, New Jersey. It provides an evaluation of subsurface conditions and geotechnical engineering recommendations for the planned construction.

• Scope of Services: Outlines the project objectives, including subsurface exploration, laboratory testing, and geotechnical analysis for foundations, earthwork, pavements, and stormwater management.
• Site Description and Proposed Construction: Details the planned 15,000 sf single-story building, associated parking, utilities, and stormwater structures, designed to DoD Unified Facilities Criteria.
• Subsurface Exploration Program: Describes the methods used, including test borings, in-situ permeameter tests, and field resistivity testing.
• Site Geology and Subsurface Conditions: Characterizes the site geology, subsurface stratigraphy (existing fill and Cohansey Formation soils), groundwater levels, and seismic site classification.
• Site Grading and Earthwork: Provides recommendations for subgrade preparation, fill soil requirements, and compaction criteria.
• Foundation Recommendations: Recommends shallow spread footings and provides allowable soil bearing pressure and settlement expectations.
• Pavement Recommendations: Details proposed asphalt and concrete pavement sections based on traffic loads and design life.
• Stormwater Management: Presents permeability test results and USDA soil textural classifications.
• Construction Considerations: Offers guidance on site grading, spread footings, and construction dewatering.
• General Specification Recommendations: Suggests an allowance for potential additional costs and provides a disclaimer regarding the report's informational purpose.

This report is crucial for bidders to understand the subsurface conditions and the geotechnical requirements for the project. It informs decisions regarding foundation design, earthwork, pavement construction, and stormwater management, directly impacting construction methods, material selection, and potential risks. Bidders should review the detailed findings and recommendations to accurately estimate costs and develop their construction approach.

Form / Attachment / Pricing Sheet

This document, "EXHIBIT B – SUBCONTRACTOR INFORMATION AND CONSENT FORM," is a required form for potential subcontractors and teaming partners. Its purpose is to obtain consent for the release of past performance information to the prime contractor during the source selection process. The government requires this consent to assess the offering contractor's past performance relevancy and confidence.

• Consent Statement: Subcontractors/teaming partners must sign to allow discussion of their past and present performance with the prime contractor.
• Identification: Requires the name of the firm, their role (subcontractor/teaming partner), and the prime contractor's entity.
• Reference List: Requires details for at least three references, including contract number, title, role (Prime/Sub), work performed, and Point of Contact (POC) information (Name, Phone, Fax, Email).
• Signature and Company Information: Requires a signature from an authorized individual, company name, address, city/state/zip, and date.

Prime contractors are required to submit these completed consent forms from their major subcontractors/teaming partners as part of their proposal submission. Additionally, certain subcontractors may be required to send off questionnaires to their references, as indicated by the offering contractor. Bidders should ensure their proposed subcontractors/teaming partners understand and can complete this form accurately and promptly.

Form / Attachment / Pricing Sheet

This document is a "Letter of Commitment" template intended for use by a proposed subcontractor or key personnel. It serves to formally commit the subcontractor/personnel to fulfilling specific duties for a potential contract, should the prime proposer be awarded the contract.

• Commitment Statement: Requires the subcontractor to unequivocally commit to fulfilling duties.
• Proposer Information: Requires the name of the prime proposer to whom the contract may be awarded.
• Subcontractor Role: Requires the specific role the subcontractor will fulfill on the project.
• Signature Block: Includes fields for the signature, title of an authorized subcontractor official, and the date.

Bidders (prime proposers) are required to obtain and submit this letter from their key subcontractors or personnel as part of their proposal. It demonstrates the commitment of essential team members to the proposed effort.