Culvert

SOL #: W911S226U3116Combined Synopsis/Solicitation

Overview

Buyer

DEPT OF DEFENSE

Dept Of The Army

W6QM MICC-FT DRUM

FORT DRUM, NY, 13602-5220, United States

Place of Performance

Place of performance not available

NAICS

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel (331210)

PSC

Miscellaneous Prefabricated Structures (5450)

Set Aside

Total Small Business Set-Aside (FAR 19.5) (SBA)

Original Source

https://sam.gov/opp/15f7c39798ef49af91118f94e96c3710/view

Timeline

Posted

Apr 28, 2026

Last Updated

May 11, 2026

Submission Deadline

May 13, 2026, 6:00 PM

Qualification Details

Fit reasons

NAICS alignment with historical contract wins in similar service areas.
Scope strongly matches core technical capabilities and delivery model.

Risks

Past performance thresholds may require one additional teaming partner.
Potential clarification needed on staffing minimums before bid/no-bid.

Next steps

Validate eligibility requirements, assign capture owner, and schedule partner outreach to confirm teaming strategy before submission planning.

Quick Summary

The Department of the Army, specifically W6QM MICC-FT DRUM, has issued a Combined Synopsis/Solicitation for the procurement of a 5'x6'x51.7' Box Culvert. This opportunity is designated as a Total Small Business Set-Aside. Proposals are due by May 13, 2026, 6:00 PM EDT.

Scope of Work

The requirement is for a pre-fabricated box culvert with specific dimensions and features:

Approximately 51.7 lineal feet of 5' (span) x 6' (rise) I.D. Box Culvert (8 sections).
Includes cutoff walls for two culvert ends and four wingwalls (four L-shaped cantilever wingwalls, 8' long).
Two headwalls, 1' wide x 1' high on each end section.
Neoprene gaskets to be installed on each box section prior to delivery.
Level 1 black bar reinforcing.
HL-93 Live Load Rating (NY PE stamp with supporting calculations required).
Class 100 Tracked and Class 120 Wheeled in accordance with UFC 3-310-08.
Skew angle of the culvert with the road will be 24 degrees.
Drawings/submittals must be stamped by a PE licensed in NY with supporting engineering.
Exterior waterproofing is by others.