Design/Build B562 MAU#1 Replacement

Form / Attachment / Pricing Sheet

This document is a "Request for Information" (RFI) form used to formally request information or clarification from the government regarding a contract. It is intended to provide an efficient mechanism for responding to a contractor's request for information.

• Contract Information: Includes Contract Number (RFP 5997283), Contract Title (DLA Site Development), Prime Contractor, and Subcontractor/Supplier.
• RFI Details: Fields for RFI Number, Subject/Title of RFI, Drawings, Details, Specification, CPM Activity Number, and Cost Effect (Increase/Decrease/None).
• Information Requested & Recommended Solution: A section to detail the specific information needed and any proposed solution.
• Response Deadlines: Fields for the date a response is required, and signature lines for the originating Field Office and the Prime Contractor.
• Important Disclaimer: The form explicitly states that the RFI system and its responses do NOT authorize the contractor to proceed with work. Proceeding without explicit authorization is at the contractor's own risk. If the response is considered a changed condition, written notice to the Contracting Officer is required within 20 calendar days.

This form is used by contractors to seek clarification or additional information from the government. Bidders should use this form to formally document any questions they have about the solicitation, SOW, PWS, or other contract-related documents. It ensures that requests for information are properly recorded and addressed, and it clarifies that responses do not constitute an authorization to proceed with changes to the contract scope or cost without formal modification.

Other / Unclassified

This document outlines the General Contract Requirements for Naval Submarine Base New London, updated on 9/6/18. It details various operational, safety, and administrative requirements for contractors working on the base.

• Station Regulations: Contractors must comply with all posted government regulations and those requested by the Contracting Officer.
• Fire Protection: Contractors must be aware of fire alarm locations and procedures, and store combustible materials safely.
• Safety Requirements: Includes mandatory meetings with the Contracting Officer's representatives, potential inspections for OSHA/Navy violations, reporting procedures for damage and accidents (within 24 hours), and adherence to the US Army Corps of Engineers Safety Manual (COE EM-385). Crucially, it states that NO EMERGENCY MEDICAL SERVICES ARE AVAILABLE AT THE BASE.
• Crane Safety: Specific requirements are detailed, including compliance with NAVFAC P-307, applicable ANSI/ASME standards (e.g., B30.5, B30.9, B30.20, B30.26), operator qualifications, equipment certification, and critical lift plans for certain operations. Barge-mounted cranes have additional stability and certification requirements.
• Radiological Accident (RADCON) Drills: Contractors must be aware of and participate in RADCON drills, which occur approximately every three months and can cause delays. All employees require RADCON training and a badge.
• Environmental Protection: Contractors must comply with all applicable Federal, State, and Local environmental laws and regulations, and are responsible for cleanup of any releases.
• Insurance: Specific insurance coverage requirements are listed, including Comprehensive General Liability, Automobile Liability, and Workmen's Compensation, with a 30-day notice required for cancellation or material change.
• Security Requirements: Details the process for obtaining base access via the Defense Biometric Identification System (DBIDS), including sponsorship, required identification, background checks, and potential delays. Foreign nationals require special approval. Company vehicles must display company name and valid licenses/stickers. Deliveries have specific time windows.
• Permits: Contractors are responsible for obtaining all necessary appointments, licenses, and permits at their own expense.
• Energy Star and FEMP: Policy encourages the use of energy and water-efficient products.
• Diving Operations: Requires coordination with Port Operations, Security, and NRMD-RADCON prior to any diving activities, and mandatory RADCON training for divers.

Solicitation / RFP / RFQ

This solicitation is for a Design/Build project to replace two existing Makeup Air Units (MAU) in Building B562 at the Naval Submarine Base New London, Groton, CT. The existing units are 26 years old, parts are unavailable, and they lack dehumidification, leading to unsafe conditions. The new equipment must match existing capacities and include dehumidification to 50% RH +/- 10%. Technological innovation, such as a Dedicated Outdoor Air Unit (DOAS), is permitted if energy-efficient and cost-effective.

• Replacement of (2) existing Makeup Air Units (MAU) in Building B562.

• Incoming air dehumidification to 50% RH +/- 10%.

• Equipment to be energy-efficient and cost-effective.

• Potential use of innovative solutions like DOAS.

• Work to be performed in accordance with Attachment A.

• Contract Type: Indefinite Delivery / Indefinite Quantity (IDIQ), Multiple Award Construction Contract (MACC).

• Period of Performance: 210 calendar days after contract award.

• Magnitude of Construction: Between $250,000 and $500,000.

• NAICS Code: 236220

• PSC Code: Y1JZ

• Proposal Due Date: 4 March 2026 at 12:00PM EST.

• Proposals must be emailed to shawn.a.drake3.civ@us.navy.mil.

• Evaluation Factor: Price. The task order will be awarded to the lowest evaluated price.

• Submission Requirements: Electronic proposal including Price Proposal Form (Attachment I), SAM Representations and Certifications, Bid Bond, and a cover page with specified details.

• Award Basis: Lowest evaluated price, determined by comparing proposed prices against IGCE and historical information.

• Discussions: The Government intends to award without discussions, but reserves the right to conduct them if necessary.

• This solicitation is for MACC holders only (ML-C00073).

• Limitations on Subcontracting apply, with specific percentages for general construction (85%) and construction by special trade contractors (75%).

• The contract will be DO rated for national defense, emergency preparedness, and energy program use.

• Site Visit: Tuesday, 17 February 2026, 10:00 AM EST at Naval Submarine Base New London.

• Visitor requests must be submitted by 10 AM EST on Friday, 13 February 2026.

• RFIs must be submitted via email by 12 PM EST on Wednesday, 25 February 2026.

• Connecticut Sales Tax: Bidders shall NOT include Connecticut Sales and Use Taxes in their Bid Price. Use CERT-141 for exemption.

• Applicable Clauses: Includes FAR and DFARS clauses related to commencement of work, liquidated damages, limitations on subcontracting, and others.

• Attachments: A comprehensive list of attachments is provided, including RFP, NEPA, Wage Determination, Tax Exemption Forms, Maps, RFI Form, Bid Form, and General Requirements.

Form / Attachment / Pricing Sheet

This document is a bid form for the B533 Cooling Tower project, requiring bidders to provide pricing for a base bid and an optional CLIN.

• Base Bid (CLIN 0001): Price for the design, provision, and commissioning of new closed circuit evaporative coolers (CCEC), condenser pump, building circulation pumps, chemical-free condenser water treatment, and bypass valves/piping at each floor loop.

• Option (CLIN 0002): Price for the demolition of oversized/non-functional CCEC-3 and CCEC-4, capping of piping and electrical conduits, and disposal/recycling of all waste materials.

• A firm fixed proposed price is required for CLIN 0001.

• A price must be entered for both CLINs; failure to do so will result in proposal rejection.

• The government may reject materially unbalanced offers.

• Award will be made on the total sum of both CLINs 0001 and 0002.

• The government reserves the right to award CLIN 0002 within 180 calendar days after contract award.

• If CLIN 0002 is exercised, additional bonding and consent of surety will be required, and the Performance Bond will be 100 percent of the combined amount of both CLINs.

• The evaluation of options will add the price for the option(s) to the total price for CLIN 0001, but does not obligate the government to exercise the option(s).

Solicitation / RFP / RFQ

This solicitation is for the Design-Build replacement of two existing Makeup Air Units (MAUs) located in Building B562 at Navy SUBASE Groton, CT. The current MAUs are 26 years old, lack dehumidification, and are no longer supported with replacement parts, leading to unsafe conditions. The new MAUs will match existing capacities but include dehumidification to 50% RH +/- 10%, be energy-efficient, cost-effective, and allow for technological innovation (e.g., Dedicated Outdoor Air Unit). MAU#1 is supply air only; MAU#2 is supply and return. New equipment will fit on existing roof curbs.

• Design, provision, and installation of MAU#1 (Base Bid).

• Design only for MAU#2 (Base Bid).

• Provision and installation of MAU#2 (Option 1).

• Installation of additional utilities (electrical, disconnect, piping, gas).

• Integration of new MAU controls with existing building DDC.

• New MAU fan to shut down on detection of smoke.

• Removal of existing MAUs and installation of new MAUs.

• Testing, adjusting, and balancing of new MAUs.

• Demolition of existing Horizontal Dehumidifier Fancoil Units (FC-1/2) and Air Cooled Condensing Units (CND-1/2) and associated concrete pad.

• Patching and sealing of penetrations.

• Management of excavated soil and concrete pad for recycling/disposal.

• Compliance with environmental regulations, including PFAS potential.

• Design-Build project.

• Base Bid includes design, provision, and installation of MAU#1, and design only for MAU#2.

• Option 1 includes provision and installation of MAU#2.

• Potential award by September 30, 2025. Work start FY26 Quarter 1.

• Not explicitly detailed in this document, but general requirements for submittals, schedules, and safety are outlined in other parts of the RFP.

• Not specified in this document.

• The project is located at NAVSUBASE New London, CT.

• The scope includes work within a Potential PFAS area.

• Environmental requirements and checklists are provided in separate documents.

Other / Unclassified

This document is a NEPA Environmental Checklist (EC) for the "B562 Replace MAU#1" project at NAVSUBASE NEW LONDON CT. It details the environmental requirements associated with the proposed project, which involves the Design-Build replacement of two existing Makeup Air Units (MAU) in the B562 Hazardous Waste Management Facility. The new units will be energy-efficient and may incorporate technological innovation. The scope includes installation of new MAUs, associated utilities, controls, and removal of existing units and associated components. A key consideration is the potential presence of PFAS in the area where an existing concrete pad will be removed.

This checklist highlights environmental considerations and requirements that may impact the project's timeline, cost, and execution. Bidders should note the following:

• Project Timeline: NEPA completion is required before award. Other environmental reviews (e.g., Coastal Zone Management, Cultural Resources, Air Emissions) may take several months.
• Scope of Work: Includes installation of new MAUs, utilities, controls, and removal of existing equipment and a concrete pad. Potential for encountering PFAS and managing contaminated soil/groundwater.
• Environmental Requirements: Compliance with Federal, State, and local environmental regulations is mandatory. Specific requirements include waste management, refrigerant handling, stormwater management, and potential coordination with environmental agencies.
• Site Conditions: Potential PFAS contamination in the work area and the need to manage excavated soil and groundwater.
• Schedule: The project is tentatively scheduled to start in FY26 Quarter 1, with potential award by September 2025. Environmental reviews may impact this schedule.

Other / Unclassified

This document is a General Decision Number (CT20260024) dated 01/23/2026, which supersedes CT20250024. It pertains to Building Construction Projects in New London County, Connecticut, excluding single-family homes and apartments up to four stories. The document lists prevailing wage rates and fringe benefits for various construction trades, including:

• Heat & Frost Insulator
• Bricklayer
• Cement Mason/Concrete Finisher
• Floor Layer (Carpet Only)
• Carpenter (Scaffold Builder, Acoustical Ceiling Installation, Drywall Hanging, Form Work, Metal Stud Installation)
• Electrician
• Elevator Mechanic
• Power Equipment Operator (Backhoe/Excavator/Trackhoe, Bulldozer, Crane, Loader)
• Ironworker (Reinforcing, Structural, Ornamental)
• Laborer (Common/General, Mason Tender-Cement/Concrete)
• Painter (Brush and Roller)
• Drywall Finisher/Taper
• Plumber
• Pipefitter
• Roofer (Composition, Slate and Tile)
• Sheet Metal Worker (Flashing/HVAC Duct, General, Roofs Installation)
• Truck Driver (Dump Truck)
• Welders (rate prescribed for incidental craft)

It also includes footnotes regarding paid holidays and vacation policies, and details on Executive Orders 13706 (Paid Sick Leave) and 13658 (Minimum Wage for Federal Contractors). Information on the Wage Determination Appeals Process is also provided.

This document is crucial for bidders as it establishes the prevailing wage rates and fringe benefits that must be paid to laborers and mechanics employed on construction projects covered by the Davis-Bacon Act in the specified geographic area. Bidders must use this information to accurately calculate labor costs for their proposals and ensure compliance with federal labor standards.

Other / Unclassified

This document is a research report from the Office of Legislative Research titled "SALES TAX EXEMPTION FOR BUILDING MATERIALS USED IN STATE CONSTRUCTION PROJECTS." It explains Connecticut's state sales and use tax exemption for building materials purchased by contractors for use in construction projects for state agencies and other exempt entities. It details the scope of the exemption, which applies to materials permanently installed or placed in a project, but not to equipment or tools. The report also outlines the process for contractors to obtain this exemption using a DRS certificate (CERT-141) and the penalties for misuse.

This document is relevant to bidders on state construction projects as it clarifies tax obligations related to materials. Understanding this exemption can impact a bidder's cost proposals and operational planning. The report also provides context by comparing Connecticut's exemption to those in 15 other states, which may be relevant for contractors operating in multiple jurisdictions or for understanding the broader landscape of state construction tax laws.

Form / Attachment / Pricing Sheet

This document, CERT-141, is a Contractor's Exempt Purchase Certificate used in Connecticut. It allows contractors performing work for an "exempt entity" (e.g., government agencies, certain non-profits) to purchase materials and supplies tax-exempt, provided these items are installed or placed in the project and remain there after completion.

• Contractor Information: Name of the exempt entity, address, CT Tax Registration Number, Federal Employer ID Number.
• Project Details: Address of the project, type of exempt entity (state government, municipality, charitable, religious, federal, other).
• Purchaser & Seller Information: Names, addresses, and tax registration/employer ID numbers for both the purchaser (contractor) and the seller.
• Item Description: A section to provide a written description of each item purchased, with the option to attach additional sheets.
• Certificate Type: Options for a "Blanket certificate" (valid for three years unless revoked) or a "Certificate for One Purchase Only."
• Declaration: A statement by the purchaser affirming the property will be installed in the exempt project and acknowledging liability for use tax if exemption requirements are not met.

This form is crucial for contractors who are awarded contracts involving work for exempt entities in Connecticut. It outlines the process and requirements for claiming sales and use tax exemptions on materials and supplies. Bidders should understand how to properly complete and use this certificate to ensure compliance and avoid potential tax liabilities. The document also clarifies the seller's responsibility and the record-keeping requirements for both parties.

Form / Attachment / Pricing Sheet

This document is a "Base Map" which provides a layout of a facility, likely a military installation, with various buildings, roads, and points of interest labeled. It serves as a visual reference for the physical layout of the area.

• Labeled buildings (e.g., "Security-BLDG 500")
• Roads and routes (e.g., "Route 12", "I 95", "Crystal Lake Rd")
• Gates (e.g., "GATE 7", "MAIN GATE#1")
• Parking areas
• Other features like "Bleachers", "Jogging Track", "Sewer Pump Station", and "Nautilus Memor."
• Numerical identifiers for many structures and areas.

This map is relevant for bidders to understand the physical environment of the opportunity. It can help in visualizing the scope of work, logistical considerations, site access, and the location of key facilities or assets related to the opportunity. It is particularly useful if the opportunity involves work on-site, requiring navigation or understanding of the base layout.

Form / Attachment / Pricing Sheet

This document is a map of Naval Submarine Base New London in Groton, CT. It serves as a visual reference for the base layout, including gates, buildings, roads, and other facilities.

• Detailed map of the base with various features labeled.
• Grid system for referencing locations.
• Table of coordinates or data points (partially visible).
• Labels for key areas such as "EAST GATE," "MAIN GATE," "NORTH GATE," and "TRUCK GATE."

This map is relevant for bidders who may need to understand the physical layout of the base for site visits, logistical planning, or if the opportunity involves work on or around the base. It helps in visualizing the operational environment.