Dorm Receptacles

Statement of Work (SOW) / Performance Work Statement (PWS)

The primary objective is to supply and install new GFI protected electrical circuits and four (4) duplex receptacles in each ground floor stairwell of eight (8) Unaccompanied Military Housing buildings at Seymour Johnson Air Force Base.

• Installation of a new 20-amp GFI protected circuit from the electrical panel to each east and west end ground floor stairwell.

• Routing of conduit (approximately 360 feet per facility, field verified) and wiring in surface-mounted conduit, painted to match surroundings (white and brick red).

• Creation of a single, clean, and sealed exterior envelope penetration per facility for conduit.

• Installation of four (4) duplex receptacles per stairwell, intended for bike racks, with final locations field verified.

• Installation of a new 20-amp single-pole circuit breaker in the designated Siemens panel (bolt-on type, field verified) and updating the panel directory.

• Clear and professional labeling of all new receptacles, junction boxes, and circuit breakers.

• Daily cleanup of work areas and proper disposal of debris.

• Repair of any turf or sod damage caused by vehicles.

• All work and materials must comply with the National Electrical Code (NEC), U.S. Army Corps of Engineers Safety Manual 385-1-1, UFC 3‐501‐01, UFC 3‐520‐01, and relevant UFGS.

• Materials must be new, defect-free, and listed/labeled by a nationally recognized testing laboratory (NRTL).

• Discovery of unforeseen conditions (code violations, panel capacity issues, hazards) must be immediately reported to the government POC.

• Daily progress reports are required.

• Work to be performed on a building-by-building basis.

• Completion of all specified tasks for each facility within ten calendar days.

• Total period of performance: 90 calendar days.

• Location: Unaccompanied Military Housing, Seymour Johnson Air Force Base, North Carolina.

• Contractor shall designate an on-site Project Lead.

• Access to facilities and electrical rooms must be requested at least three (3) calendar days in advance.

• Coordination with the Government Point of Contact (POC) or Contracting Officer's Representative (COR) is required for all work activities and site access.

• Temporary electrical panel shutdowns require at least five (5) business days' advance notice to the government POC.

• Government-furnished items include access, a designated POC, and a potential laydown area. Government has provided initial survey and marked-up drawings for conduit runs, but final installation must be field verified.

• Acceptance Criteria: Joint walkthroughs, verification of work completion to specifications and codes, successful testing of receptacles and GFI protection, updated panel directory, and clean work area. Final project acceptance after all buildings are accepted.

Form / Attachment / Pricing Sheet

This document is a Wage Determination issued under the Service Contract Act. It provides the minimum wage rates and fringe benefits required for various occupations when performing contract work in North Carolina, specifically within the Counties of Wayne.

• Lists occupational codes and titles.
• Specifies the minimum hourly wage rate for each occupation.
• Indicates that fringe benefits required follow the occupational listing (though specific fringe benefit details are not provided in this excerpt).
• Includes notes on Executive Orders related to paid sick leave (EO 13706) and minimum wage (EO 13658), and details Health & Welfare benefits and vacation/holiday policies.
• Outlines the process for requesting additional classifications and wage rates (conformance process) if an occupation is not listed.

Bidders must use this wage determination to understand the minimum labor costs associated with the opportunity. It is crucial for accurately calculating labor costs in their proposals to ensure compliance with federal regulations. The listed wage rates and benefits must be factored into the overall cost of performing the contract.

Form / Attachment / Pricing Sheet

This document provides details and instructions for an upcoming site visit related to the opportunity. It encourages offerors to inspect the site where work is to be performed to understand conditions affecting contract performance. Failure to inspect the site will not be grounds for a claim after contract award.

• Site Visit Date and Time: Scheduled for May 11, 2026, at 09:00 AM EDT.
• Arrival Instructions: Contractors must arrive at the Seymour Johnson Visitors Center (1050 Wright Brothers Ave, Goldsboro, NC, 27534) no later than 08:30 AM EDT to allow time for vehicle passes.
• Required Identification: All visitors must present a Real ID (or Passport), vehicle registration, and proof of automobile insurance.
• RSVP: Requested by May 8, 2026, at 4:00 PM EDT. Submit the names of all attendees via email to michael.demers.4@us.af.mil and deandre.fuller@us.af.mil.
• Frequency: Only one site visit will be held.

This attachment is crucial for bidders to understand the logistics of a mandatory site visit. It outlines the date, time, location, required identification, and RSVP process. Attending the site visit is strongly encouraged to gain a comprehensive understanding of the work environment, which is essential for accurate proposal preparation and cost estimation. Failure to attend may impact a bidder's ability to submit a well-informed proposal.

Solicitation / RFP / RFQ

This solicitation (FA480926Q0030) is for the complete turn-key installation of new electrical circuits and outlets at eight (8) Unaccompanied Military Housing (dormitory) buildings (Dorms 3613, 3614, 3615, 3616, 3603, 3605, 3606, 3607) at Seymour Johnson Air Force Base.

• Installation of two (2) new 20-amp, 120-volt GFCI circuits per dorm.

• Installation of eight (8) new 15-amp duplex receptacles per dorm, located in the ground-floor stairwells (East and West ends).

• All work must adhere to specifications, codes, and standards detailed in the Statement of Work (SOW).

• The North American Industry Classification Standard (NAICS) code is 238210.

• Contract Type: Firm Fixed Price.

• Period of Performance: 90 Calendar Days from the date of award.

• Estimated Value: Not explicitly stated, but the Size Standard is USD 19,000,000.00.

• Offer Due Date: 18 May 2026, 10:00 AM.

• Proposals must be submitted electronically via email to the 4th Contracting Squadron.

• Evaluation Factors: Price, Technical Capability, and Past Performance.

• Technical Capability: Requires documentation of technical capability and a valid, current state-issued Electrical Contractor license.

• Past Performance: Requires submission of a "Present and Past Performance Information Form" for up to three relevant contracts.

• Site Visit: Encouraged, scheduled for 11 May 2026 at 09:00 AM EDT. RSVP required by 8 May 2026.

• This acquisition is set aside for Small Business.

• Payment requests and receiving reports must be submitted electronically via Wide Area WorkFlow (WAWF).

• Required insurance includes Workers' Compensation, General Liability, and Automobile Liability.

• Contractors must comply with base traffic rules, safety regulations, and identification requirements for access to Seymour Johnson Air Force Base.

Form / Attachment / Pricing Sheet

This document contains architectural drawings detailing the proposed "Dorm Campus Stairwell Receptacle Addition" project at Seymour Johnson Air Force Base. It provides elevations and a detailed section of a typical stairwell to illustrate the planned receptacle installations.

• Elevations (North, South, East, West): Show the exterior of the dorm buildings, indicating general layout and proposed conduit runs.
• Enlarged Stair Section: Provides a detailed view of a stairwell, showing the proposed location for a 4-gang receptacle opposite the stairs near a bike rack.
• Conduit Information: Notes indicate the need to match conduit color to the surface and to deconflict conduit locations with existing conditions.
• Project Information: Includes details such as facility name, project title, drawing date (April 7, 2026), and relevant sheet numbers (A-201, A-202).

These drawings are crucial for bidders to understand the physical scope and specific locations for the electrical receptacle additions within the dorm campus stairwells. They provide the visual and spatial information necessary for accurate bidding and project planning.

Form / Attachment / Pricing Sheet

This document is the Present and Past Performance Information Form (PPIF). Bidders must use this form to provide details for each contract they identify as recent and relevant for this solicitation. A separate form should be completed for each contract. If additional space is needed, bidders should attach a separate sheet.

• Offeror Information: Cage Code, SAM UEI, and additional details for subcontractors or organizational changes.
• Program Title: Name of the program associated with the contract.
• Contract Specifics: Customer Name, Address, Phone Number, Contract Number, Type of Contract, Period of Performance.
• Contract Financials: Initial Contract Price/Cost, Final Amount Invoice/Amount Invoice to Date, Reason for Change(s) in Value.
• Contract Schedule: Original Completion Date, Current Scheduled Completion Date, Number and Reason for Change(s) in Schedule.
• Description of Effort: Details of the work performed as prime or subcontractor, including how it relates to the current requirement (referencing PWS paragraphs where applicable).
• Performance Self-Assessment: Description of any problems encountered and corrective actions taken.
• Current Status of Contract: The current status of the contract.
• Customer Points of Contact: Names and contact information for the Program Manager, Contracting Officer’s Representative, Contracting Officer, and Administrative Contracting Officer or Contract Administrator.

This form is crucial for bidders to document their relevant past performance. The information provided will likely be used by the government to evaluate the bidder's capability to successfully perform the work required by the solicitation. Careful and complete submission of this form, along with a clear description of the effort and self-assessment of performance, is essential for a strong proposal.