Draft Tube Bulkhead Seal Supply

Solicitation / RFP / RFQ

This solicitation, W9128F26QA048, is for the supply of 9 complete rubber seal assemblies. The North American Industry Classification System (NAICS) code is 423840, with a size standard of 125. The acquisition is set aside for Small Business.

• Supply 9 complete rubber seal assemblies.

• The pricing arrangement is Firm Fixed Price.

• The contract type is anticipated to be Firm Fixed Price.

• Delivery is from the date of award, with a lead time of 150 calendar days.

• FOB details are "Destination".

• The delivery/performance location is COE FT RANDALL PRJT OFC MNTN SECT, NTR RSC SC USAED OMAHACENWO-OD-FR-N, 399 POWERHOUSE ROAD, PICKSTOWN, SD 57367, UNITED STATES.

• The solicitation issue date is April 3, 2026.

• The offer due date is April 28, 2026, at 02:00 PM.

• Quotes should be submitted electronically to Brandie Murphy at brandie.l.murphy@usace.army.mil.

• Offers must include solicitation number, offeror's name/address/tax ID/email/phone, authorized negotiator's information, agreement to terms, and acknowledgement of amendments.

• The evaluation will be based on "Best Value-Tradeoff" considering the following factors: Technical, Past Performance, Delivery, and Price. Technical and Past Performance related to gate bulkhead seals will receive favorable evaluations. Offerors must submit three projects from the past ten years demonstrating experience with bulkhead seals manufacturing. A detailed delivery schedule is required. Lower total bid prices will receive favorable evaluation, but technical, past performance, and delivery are considered more important than price.

• Offerors agree to hold prices firm for 90 calendar days from the offer due date.

• Questions must be submitted in writing no later than seven (7) calendar days prior to the due date.

• This acquisition is set aside for Small Business.

• The solicitation incorporates FAR clauses by reference and in full text, including those related to System for Award Management, Prohibition on Requiring Confidentiality Agreements, Protecting Government's Interest, Terms and Conditions for Commercial Products, Small Business Set-Aside, Child Labor, Combating Trafficking in Persons, Encouraging Contractor Policies, Payment by EFT, Accelerated Payments to Small Business Subcontractors, Protest after Award, Applicable Law for Breach of Contract, Control of Government Personnel Work Product, Requirement to Inform Employees of Whistleblower Rights, Prohibition on Acquisition of Covered Defense Telecommunications Equipment or Services, Buy American-Balance of Payments Program, Place of Manufacture, and Economic Purchase Quantity.

• DFARS clauses are also incorporated by reference, including those related to Former DoD Officials, Whistleblower Rights, Covered Defense Telecommunications Equipment or Services, and Buy American and Balance of Payments Program.

• The U.S. Army Corps of Engineers is exempt from paying state and local taxes.

• Required insurance includes Workman's Compensation, General Liability, Automobile Liability, Bodily Injury, Property Damage, Aircraft Public and Passenger Liability, and potentially vessel collision liability.

• Attachment 1: Statement of Work

• Attachment 2: Reference Drawings

• Attachment 3: Supply Contract Drawings

Statement of Work (SOW)

This project aims to supply nine (9) rubber draft tube bulkhead seal assemblies, including one (1) spare, for the Fort Randall Dam. The existing seals, fabricated in 1949, are showing signs of degradation leading to increased leakage.

• Supply nine (9) complete rubber seal assemblies.

• Provide rubber seals made of fully molded natural rubber/Polyisoprene, with specific requirements for splices, reinforcing materials, and curing.

• Supply fluorocarbon (PTFE) clad rubber seals with specific physical properties for tensile strength and elongation.

• Seals must meet specified physical test requirements including Tensile Strength, Elongation at Break, Modulus, Durometer Hardness, Water Absorption, Compression Set, aging resistance, and low-temperature brittleness.

• Fluorocarbon film adhesion bond must meet specified loads without separation.

• Material tests and analyses must be performed and certified by an approved laboratory.

• Delivery Period: Must be completed 150 days after the date of contract award.

• Place of Delivery: United States Army Corps of Engineers, Fort Randall Dam, Pickstown, SD 57367.

• Submittals: Prior to work commencement, submit Seal Manufacturers Recommended Storage, Recommended Delivery, Seal Shop Drawings, Material Test Report, and Fluorocarbon Adhesion Bond Test Report for Government approval.

• Quality Control: Contractor must designate a quality control contact person.

• Standards: Comply with applicable Local, State, and Federal Regulations, including specific ASTM standards for rubber properties and EM 385-1-1 for safety.

• Delivery & Storage: Seals must be shipped flat and fully vulcanized; coiled seals are not allowed. Follow manufacturer's recommended storage and delivery methods.

• Operation and Maintenance Data: Provide operating instructions, installation procedures, and maintenance requirements via secure FTP site or email in PDF format at time of delivery.

• Payment: Payment will be made upon receipt, inspection, and acceptance of all seal assemblies. Invoices are to be submitted to the COR.

Form / Attachment / Pricing Sheet

This document contains detailed engineering drawings and specifications for draft tube gate guide frames and dogging devices, as well as gate seal details. It serves as a reference for the fabrication and installation of these components for the Fort Randall Reservoir Powerhouse.

• Draft Tube Gate Guide Frames and Dogging Devices: Includes elevations, sections, and details of the structural steel components, anchor bolt schedules, and quantities required (24 guide frames, 48 dogging devices).
• Gate Seal Details: Provides specifications for top, bottom, and side seals, including dimensions, materials (fully molded rubber), splice requirements, and installation notes. It specifies the need for nine sets of seals.
• Lifting Beam and Gantry Crane Details: Outlines the mechanical details for a draft tube gantry crane and lifting beam, including crane loads, guide roller details, and rail clamp specifications. It notes that the crane will be furnished by the government.

This document is crucial for bidders involved in the fabrication, supply, or installation of draft tube gates, seals, guide frames, dogging devices, or related lifting equipment. It provides the precise technical specifications, dimensions, materials, and quantities necessary for accurate bidding and manufacturing. Bidders must carefully review these drawings to understand the scope of work and ensure their proposed solutions meet the government's requirements.

Form / Attachment / Pricing Sheet

This document contains drawings related to the "DRAFT TUBE BULKHEAD SEAL REPLACEMENT" project at the Fort Randall Dam and Reservoir Powerhouse. It provides detailed technical specifications and visual representations of the components involved in the replacement of draft tube bulkhead seals.

• Sheet G-001: Project location maps and general information.
• Sheet G-002: Index to drawings, listing all related technical drawings and resource drawings.
• Sheet S-101: Plan and elevation views of the rubber seal assembly, including dimensions and general notes on installation and material requirements.
• Sheet S-501: Detailed views of the rubber seals (top, side, and bottom), including cross-sections, material specifications (e.g., Teflon coating requirements), and tolerances.
• Sheet S-502: Details of the spring shoe assembly, including materials (spring steel alloy), bolt specifications, and quantities.

These drawings are critical for bidders to understand the exact specifications, dimensions, materials, and installation details of the draft tube bulkhead seals and associated components. They form a core part of the technical requirements for this procurement and will be essential for accurate bidding and project execution.