Drain Modifications

Statement of Work (SOW) / Performance Work Statement (PWS)

This Statement of Work outlines the requirements for miscellaneous mechanical services at the USDA Eastern Regional Research Center (ERRC) in Wyndmoor, PA, specifically involving the modification of building drains and the removal of existing equipment.

• Removal and disposal of three (3) insulated boxes from the MSB second floor.

• Installation of nine (9) new floor drains in the MSB second floor laboratory.

• Installation of new associated piping to connect to the existing first-floor overhead drainage system.

• Correction of historical non-conforming repairs to the drainage system.

• Patching and finishing of the concrete floor to match the existing epoxy finish.

• Floor drains and piping must be Flame-Resistant Polypropylene (FRPP) conforming to ASTM D4101 and ASTM F1412.

• Contractor-installed piping shall be Schedule 40, matching existing drain piping.

• Floor drains to be installed flush with the floor, including a removable grate and sediment strainer.

• Piping installation must adhere to UFGS 22 00 70 for corrosive waste.

• Thermal fusion joining for fittings, except for hard-piped sink trap assemblies.

• Concrete work must comply with UFGS 03 01 00.

• Floor and wall penetrations must be sealed with UL certified sealant conforming with ASTM E814 Class A.

• Finished floor patching must match existing epoxy finish per UFGS 09 67 23.14 and manufacturer recommendations.

• Location: USDA, Eastern Regional Research Center, Wyndmoor, PA, Mechanical Services Building.

• Work Hours: Normal business hours, Monday through Friday, 7:30 AM - 3:00 PM.

• Completion Time: Within 180 calendar days.

• Warranty: A minimum one-year warranty on material and labor is required.

• Contractor must protect the existing epoxy floor from damage.

• Contractor must submit proposed drain locations for approval prior to coring.

• Contractors and subcontractors require picture ID for security access and are restricted to authorized areas.

Form / Attachment / Pricing Sheet

This document, "Attachment 4 - Div 1 General Requirements," outlines the general requirements for Division 1 of a USDA construction project. It details various administrative and procedural requirements that the contractor must adhere to throughout the project lifecycle.

• General Intentions: Covers site preparation, demolition, furnishing labor and materials, and compliance with ARS site-specific security management programs.
• Prior to Commencing Work: Mandates OSHA certified "competent person" presence, on-site safety briefings, and submission of training records for all employees.
• Project Coordination: Requires a construction project schedule, daily inspector reports, and formal meeting minutes.
• Submittals: Specifies electronic submission of all submittals (Plans, SOW, etc.) to the Contracting Officer (CO), Construction Officer Representative (COR), and Project Architect (A/E). It also requires documentation for Buy America Act compliance and the use of USDA "BioPreferred Program" products.
• Safety Submittals: Requires a site-specific Safety Plan, daily site inspections, continuous monitoring for noise, dust, and vibrations, and notification for high-risk work. Safety Data Sheets (SDS) for all chemicals must be submitted for approval.
• Construction Security Requirements: Outlines the need for a site-specific security plan, contractor personnel requirements, and security procedures for site access and working outside regular hours.
• Fire Safety: References applicable publications (ASTM, NFPA, OSHA) and details requirements for a Fire Safety Plan, site access, temporary facilities, heating/electrical, means of egress, fire extinguishers, flammable liquids, existing fire protection, smoke detectors, and hot work.
• Operations and Storage Areas: Defines rules for confining operations to authorized areas, use of roadways, protection of existing property, and management of utility services.
• Disposal and Retention: Specifies procedures for disposing of materials and equipment, including items that remain government property and those that become the contractor's property.
• Construction Waste Management: Details responsibilities, procedures, and waste diversion goals, including specific waste categories to be diverted from landfill.
• Warranties: Outlines general, expressed, and latent defect warranties.
• Biobased Preferred Products: Requires compliance with regulations for biobased products and encourages the use of such materials.

This document is crucial for bidders as it establishes the foundational administrative, safety, security, and procedural requirements for the project. Understanding these general requirements is essential for accurate proposal development, cost estimation, and successful project execution. It highlights key compliance areas such as safety plans, submittals, and the use of specific product types (e.g., biobased products).

Form / Attachment / Pricing Sheet

This document is a Project Specific Submittal Log for the ERRC MSB Drain and Equipment Mods project. It serves as a log to track various submittals required for the project.

• Project Name: ERRC MSB Drain and Equipment Mods
• Address: 600 East Mermaid Lane, Wyndmoor, PA 19038
• Submittal Log: Details specific submittals including Submittal Number, Specification Name, Item Description, Type of Submittal, and Status.
• Key Submittals Listed: Piping, Concrete, Floor Finish, Drain core locations, and Sealant (ASTM E814, Class A).
• Status: The overall status is marked as 'Pending'.

This log provides potential bidders with insight into the types of materials and components that require formal submittal and approval processes. It outlines specific items like piping, concrete, floor finishes, drain installations, and sealants, along with their corresponding specification numbers or descriptions. Understanding these submittal requirements is crucial for planning and executing the project according to the specified standards and timelines.

Form / Attachment / Pricing Sheet

This document is a drawing that details the removal of three insulated storage boxes at the Eastern Regional Research Center. It specifies which boxes are to be removed and which are to remain.

• Identifies the specific location of the work: Eastern Regional Research Center, 600 East Mermaid Lane, Wyndmoor, PA, 19454.
• Clearly indicates which of the six storage boxes are to be removed (Boxes 1, 2, and 3) and which are to remain (Boxes 4, 5, and 6).
• Includes general notes advising to take precautions to protect remaining boxes, flooring, and walls.

This drawing provides critical spatial and logistical information for any bidder involved in the removal of these storage boxes. It clarifies the scope of work by defining the exact items to be removed and highlights the need for careful execution to avoid damage to the surrounding facility.

Form / Attachment / Pricing Sheet

This document provides architectural drawings detailing the installation of new floor drains and associated piping modifications within the Mechanical Services Building at the Eastern Regional Research Center. It outlines the scope of work for contractors regarding drain installation and piping connections.

• Scope: Installation of floor drains on the first and second floors of the Mechanical Services Building.
• Piping: New drains to be tied into existing drain piping in the first-floor overhead. Specifies Flame Resistant Polypropylene (FRPP) piping for acid waste service, meeting ASTM 4101 and ASTM F1412 standards, with thermal fusion.
• Materials: Use of 1-1/2" and 4" FRPP piping is indicated.
• Sealing: Floor and wall penetrations must be sealed with ASTM E814 Class A material.
• Demolition: Certain existing piping is marked for removal.
• Coordination: Contractor must verify drain locations to avoid impacting structural or other systems and submit proposed locations to the government representative prior to installation.

This attachment is crucial for bidders to understand the physical scope, material requirements, and installation specifications for the drain piping modifications. It details the specific locations and types of drains and piping to be installed, as well as requirements for demolition and sealing of penetrations. Bidders must use this information to accurately estimate costs, labor, and materials for their proposals.

Form / Attachment / Pricing Sheet

This document is a submittal log for Division 1 USDA General Requirements for the ERRC MSB drain and Equipment Mods project. It outlines the various submittals required from contractors, their specifications, descriptions, frequency of submission, and associated deadlines or conditions.

• Subdivision & Specification Number: Identifies the requirement category and specific clause.
• Description: Details the nature of the submittal (e.g., OSHA training, safety plans, material approvals, waste management plans).
• Frequency: Specifies how often the submittal is required (e.g., prior to commencing work, each progress payment, daily, weekly, at project closeout).
• Date Submitted / Status / Remarks: Fields for tracking submission status (though largely empty in this example).

This log is crucial for bidders to understand the administrative and compliance requirements related to project execution. It details critical pre-work, ongoing, and closeout submittals, including safety plans, material compliance (e.g., Buy America Act, Biopreferred), project schedules, and waste management. Adhering to these submittal requirements and timelines is essential for successful contract performance and payment processing.

Form / Attachment / Pricing Sheet

This document contains structural framing plans for the foundation, first floor, and second floor of a building. It provides detailed layouts and specifications for concrete and structural steel components.

• Foundation & First Floor Plan: Shows slab thickness, reinforcement details, and footing elevations.
• Second Floor Framing Plan: Details beam and joist layouts, spacing, and floor elevations.
• General Notes: Includes specifications for concrete strength, reinforcing bar types, steel conformance, and design live loads for different areas (e.g., second floor, fan room, roof).
• Structural Steel Notes: Outlines requirements for steel material, fabrication, erection, and connections.

This document is crucial for bidders involved in the structural aspects of the project. It defines the materials, dimensions, and construction methods required for the building's foundation and floor framing, directly impacting material procurement, labor, and construction planning.

Form / Attachment / Pricing Sheet

This document contains structural drawings and details, including various sections and details for concrete work, beams, ribs, columns, and footings. It serves as a technical reference for the structural components of a building.

• Concrete Beam Schedule: Details dimensions, reinforcement (top, bottom, stirrups), and notes for various beams (B1-B18).
• Concrete Rib Slab Schedule: Details dimensions, reinforcement, and notes for ribbed slabs (J1-J10).
• Column Schedule: Lists column marks, sizes, vertical reinforcement, and ties.
• Footing Schedule: Provides dimensions and reinforcement details for different footing types (A, B, C).
• Details: Includes specific drawings for slab depressions, slabs on grade, stepped wall footings, wall sections, curbs, mechanical pads, exterior columns, and more.
• Notes: General notes regarding column and footing dimensions, reinforcement orientation, centering, elevations, and references to standard detail drawings.

This attachment is crucial for bidders involved in the structural and concrete aspects of the construction project. It provides the precise specifications and dimensions required for materials, fabrication, and installation of all structural concrete elements. Bidders must carefully review these drawings to accurately estimate costs, plan construction methods, and ensure compliance with the structural design requirements.

Form / Attachment / Pricing Sheet

This document is a General Decision Number (GDN) for wage determination, specifically for Building Construction Projects in Montgomery County, Pennsylvania. It outlines the prevailing wage rates and fringe benefits for various construction trades. This document is crucial for bidders to understand the labor costs associated with the opportunity and ensure compliance with federal labor laws.

• General Decision Number: PA20260099 (Superseded: PA20250099)
• Effective Date: 01/02/2026
• Construction Type: Building
• County: Montgomery County, Pennsylvania
• Scope: Building Construction Projects (excluding single-family homes or apartments up to and including 4 stories).
• Trades Covered: Includes rates for Asbestos Worker, Boilermaker, Bricklayer, Tile Finisher/Setter, Carpenter, Millwright, Piledriverman, Electrician, Line Construction, Elevator Mechanic, Power Equipment Operator, Ironworker, Laborer, Painter, Glazier, Plasterer, Cement Mason/Concrete Finisher, Pipefitter, Plumber, Roofer, Sprinkler Fitter, and Sheet Metal Worker.
• Executive Orders: Notes applicability of Executive Order 13706 (Paid Sick Leave) and Executive Order 13658 (Minimum Wage) for federal contractors.

Bidders must use this wage determination to accurately estimate labor costs for their proposals. Compliance with these prevailing wage rates is a mandatory requirement for federal construction contracts. The document also provides information on how to appeal wage determinations and contact relevant Department of Labor branches for clarification.