Electric Cart Washer to include deinstalling (old)/site prep & installing new)

Statement of Work (SOW) / Performance Work Statement (PWS)

To procure professional services for the deinstallation of an existing, non-functional Steam Cart Washer, preparation of the site, installation of a new Electric Cart Washer, and final testing of its functionality at the Valley Coastal Bend Health Care System (VCB HCS) Harlingen Care Center.

• Deinstallation of the existing Steam Cart Washer, including removal of stainless-steel panels and disposal of the old unit.

• Pre-installation site preparation, including drilling/coring concrete for utilities, installing new stainless steel cart washer support, and potentially adjusting service elevators.

• Installation of a new Electric Cart Washer, including connecting utilities (water, RO system, compressed air, drainage), installing an exhaust fan, and connecting to the RO system.

• Final safety testing and completion of the "Turn-Key" project.

• All work must meet applicable local & state codes and standards.

• Critical water testing required upon completion per AMMI ST 108 requirements and VCB policy.

• Adherence to all safety and infection control measures (Level IV).

• Compliance with OSHA standards and relevant Federal Regulations.

• Performance Location: Harlingen Care Center, 2601 Veterans Dr., Harlingen, TX, 78550.

• Hours: Demolition and electrical shutdowns outside normal operation hours (Mon-Fri, 07:00 AM - 08:00 PM CST). Weekend work requires COR approval.

• Contractor must supply all labor, material, equipment, and supervision.

• Contractor must provide all necessary Personal Protective Equipment (PPE).

• Contractor must provide their own dumpster for disposal of items and debris.

• Contractor personnel must be qualified, speak English, and have OSHA 30/10-hour certification.

• Specific requirements for the new Electric Floor Mounted Cart Washer are detailed, including dimensions, electrical heating, double-door pass-through, power-operated doors, loading ramp, forced air drying, and various other features.

• Contractor must adhere to ICRA IV requirements.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the general requirements for a construction project involving the deinstallation of a steam cart washer, site preparation, and installation of an Electric Cart Washer.

• General Construction: Includes general construction, electrical alterations, utility/critical water, drainage, removal of existing structures, and installation of new construction.
• Site Preparation: Preparation of the site for building operations.
• Deinstallation: Removal of the existing steam cart washer.
• Installation: Installation of the new Electric Cart Washer as per drawings and specifications.

Not explicitly stated, but implies work at a Medical Center facility.

• Safety: Refer to section 01 35 26 for safety and infection control requirements.

• Site Visits: Bidders must schedule appointments with the Contracting Officer Representative (COR) for site visits.

• Testing: Contractor must notify the COR in advance for testing laboratory personnel to be present for specimen and field inspection (minimum three workdays notice).

• Security: All employees must comply with VA security management program, obtain police permission, be identified, and restricted from unauthorized access. No photography of VA premises without written permission. Vehicle authorization required 24 hours in advance for site access.

• Operations & Storage: Contractor must confine operations and material storage to authorized areas. Temporary buildings require COR approval. Contractor is responsible for damage caused by their performance.

• Utilities: Maintain existing utility services. Coordinate any necessary cutting or capping of pipes, wires, etc., with the COR. Connection fees for new permanent service are the Government's responsibility.

• Phasing: The Medical Center operates 0800-1630, 5 days a week. Interruptions must be scheduled with the COR. The work is phased as follows: Deinstallation of Steam Cart Washer, Site Preparation, Installation of Electric Cart Washer, Testing and Turn-key Completion.

• Restoration: Contractor must restore disturbed or removed existing work to its original condition or as specified. Any damage caused by the contractor must be repaired at their expense.

• As-Built Drawings: Contractor must maintain and submit two sets of as-built drawings, updated throughout construction.

• Warranty Management: Develop and submit a warranty management plan, including roles, responsibilities, contact information, and status of warranties. Joint 4-month and 9-month warranty inspections will be conducted.

• Performance & Payment Bonds: Must remain effective throughout construction.

• Photographic Documentation: Provide photographic documentation of construction progress at selected milestones, including electronic indexing and navigation.

• Use of Roadways: Use established roads or authorized temporary roads. Protect curbs and sidewalks when crossing.

• Temporary Use of Elevators: Permitted with COR arrangements, subject to specific provisions regarding use hours and protection of elevator components.

• Tests: Provide a written testing and commissioning plan, conduct pre-tests, and final tests in the presence of the COR. Systems must be balanced, controlled, and coordinated.

• Maintenance & Operating Manuals: Furnish hard copies and electronic versions of manuals and provide verbal instructions.

• Drawings and contract documents are available from the solicitation website; additional copies are at the contractor's expense.

• The Government is not responsible for contractor interpretation of soil condition data.

• The COR is the primary point of contact for coordination and approvals.

Other / Unclassified

This document is a General Decision Number TX20260236, dated 01/02/2026, which supersedes TX20250236. It provides prevailing wage rates and fringes for various building construction trades in Cameron County, Texas. The document lists specific job classifications such as Boilermaker, Power Equipment Operator, Ironworker, Pipefitter, Bricklayer, Carpenter, Cement Mason/Concrete Finisher, Drywall Finisher/Taper, Electrician, Insulator, Laborer, Painter, Roofer, Sheet Metal Worker, Tile Finisher, Tile Setter, Truck Driver, and Welder.

It also includes notes regarding Executive Order (EO) 13706 (Establishing Paid Sick Leave for Federal Contractors) and Executive Order 13658 (Establishing a Minimum Wage for Federal Contractors). Information on how to appeal wage determination decisions is also provided.

This document is crucial for bidders on construction projects subject to the Davis-Bacon Act. It specifies the minimum wage rates and fringe benefits that must be paid to laborers and mechanics employed on the construction, alteration, or repair of public buildings or public works. Bidders must use this information to accurately estimate labor costs and ensure compliance with federal regulations when preparing their proposals.

Form / Attachment / Pricing Sheet

This document is a VHA Infection Control Risk Assessment (ICRA) template used for performing facility ICRAs for construction, renovation, and maintenance work. It establishes minimum requirements for categorizing activity types and patient risk to determine necessary infection control precautions.

• Activity Categorization (Table 1): Classifies work into categories A, B, C, or D based on the nature and scope of the activity.
• Affected Area Assessment (Table 2): Identifies the specific areas and associated patient populations impacted by the activity.
• Patient Risk Category (Table 3): Determines the overall patient risk level (Low, Medium, High, or Highest) for the affected areas.
• Level of Infection Prevention and Control Precautions (Table 4): Matches the Activity Category and Patient Risk Category to determine the required level of precautions (I, II, III, or IV).
• Required Control Measures (Table 5 & 6): Details the specific infection prevention and control measures required for each level of precaution, both during the activity and upon completion.
• Permit Form (Page 8): A fillable permit form for posting at the activity site for Level III and IV activities, summarizing the selected precautions and control measures.
• Appendix A: Provides an alternative method for interior construction space exhaust.

This document outlines the infection control requirements that must be adhered to during any construction, renovation, or maintenance activities performed within VHA facilities. Bidders involved in such projects must understand and comply with these requirements, which dictate the necessary precautions to prevent infection risks. The specific level of precautions (I-IV) will influence the methods and materials used, potentially impacting project timelines and costs. The permit form must be posted for Level III and IV activities.

Solicitation / RFP / RFQ

This solicitation is for the delivery and installation of a replacement electric cart washer. It includes the deinstallation of existing equipment, site preparation, safety checks, and testing.

• Replacement electric cart washer

• Deinstallation of existing equipment

• Site preparation

• Safety checks and testing

• Contract type: Firm-Fixed Price

• Period of Performance: Not explicitly stated, but implies installation and testing.

• Estimated Value: Not stated.

• Offers are due by May 26, 2026, 12:00 PM CDT.

• Submission instructions are detailed in Section E.1 and require three separate volumes: Technical Capability, Price, and Past Performance.

• Evaluation factors include Technical Capability, Past Performance, and Price.

• The award will be made to the responsible offeror whose offer is most advantageous to the Government.

• This requirement is 100% set aside for Small Business entities.

• Offerors must be verified/registered in SAM.gov and SBA.

• A site visit is scheduled for May 13, 2026, at 1:00 PM CDT. RSVP is required.

• Technical questions are due by May 20, 2026, 12:00 PM CDT.

• Offerors must submit an authorized distributor/re-seller letter from the manufacturer; no third-party letters will be accepted.

Attachment / Form

This document, "APPENDIX A - SAFETY REQUIREMENTS," outlines the mandatory safety requirements for contractors performing work under this opportunity. It details the standards and procedures that must be followed to ensure a safe work environment.

• Accident Prevention Plan (APP): Contractors must develop and submit a site-specific APP that interfaces with their overall safety program. This plan must be prepared by a qualified person and address all elements and sub-elements as outlined in EM 385-1-1.

• Activity Hazard Analyses (AHAs): Before beginning each work activity, contractors must prepare AHAs to identify specific hazards, site conditions, equipment, materials, and control measures. These must be reviewed and accepted by the Contracting Officer Representative (COR).

• Training: Specific training requirements are detailed for the Site Safety and Health Officer (SSHO), Competent Persons (CPs), and all other construction workers, including OSHA 10-hour and 30-hour courses, and specialized training for high-hazard operations.

• Inspections: Frequent and regular safety inspections are required, including daily inspections by CPs and weekly documented inspections by the SSHO. Random monthly inspections by an external Certified Safety Professional (CSP) or Certified Construction Safety and Health Technician (CSHT) are also mandated.

• Mishap Reporting: A system for reporting, recordkeeping, and analyzing near-misses, mishaps, injuries, illnesses, and property damage must be maintained. Initial reports for moderate/major mishaps are required within 2 hours.

• Personal Protective Equipment (PPE): Mandatory minimum PPE includes hard hats, safety glasses, safety shoes, and hearing protection. High-visibility apparel is also required.

• Specific Safety Areas: Detailed requirements are provided for electrical work, fall protection, cranes, control of hazardous energy (lockout/tagout), confined space entry, welding and cutting, ladders, floor and wall openings, dust control, and fire safety.

• The APP must be submitted to the COR 15 calendar days prior to the preconstruction safety conference.

• AHAs must be submitted for review at least 15 calendar days prior to the start of each phase.

• Training records must be submitted to the COR 15 calendar days prior to the preconstruction safety conference.

• Work cannot proceed without an accepted APP and accepted AHAs.

This document is critical for bidders to understand the extensive safety requirements and compliance obligations associated with the opportunity. Bidders must demonstrate their capability to meet these stringent safety standards, which will likely impact project planning, resource allocation, and overall cost.

Form / Attachment / Pricing Sheet

This document, Appendix C, provides detailed water quality specifications and rationale for different water types (Utility Water, Critical Water, Steam) used in medical device processing. It serves as a reference for understanding the required water purity and its impact on device safety and efficacy.

• Table 2: Categories and performance qualification levels of water quality: Details specific parameters (pH, alkalinity, bacteria, endotoxin, ionic contaminants, etc.) and their acceptable limits for Utility Water, Critical Water, and Steam.
• Rationale for Table 2: Explains the significance of each water quality parameter and its potential impact on medical device processing, cleaning, and patient safety.
• Section 6.3.1: Ionic characteristics: Further elaborates on specific ions (Chloride, Nitrate, Phosphate, Sulfate, Silicate, Iron, Copper, Manganese, Aluminum, Zinc) and their effects.
• Section 11: Continuous quality improvement: Outlines processes for monitoring and maintaining water quality, including maintenance, sampling techniques, and actions for exceeding specifications.

Bidders responding to opportunities requiring medical device processing or related services must understand these water quality standards. This document is crucial for:

• Assessing capability: Determining if their existing or proposed water treatment systems meet the specified requirements.
• Proposal development: Accurately describing their approach to water quality management and compliance.
• Operational planning: Identifying potential challenges and costs associated with meeting stringent water purity standards.

Form / Attachment / Pricing Sheet

This document is a VHA Pre-Construction Risk Assessment (PCRA) template used to assess and categorize the safety risks associated with Construction, Renovation, and Maintenance activities. It helps determine the necessary precautions to protect patients, employees, and contractors. It also includes a fillable permit form for posting at the activity site.

• Activity Categorization: Classifies work into "Inspection/Upkeep," "Small Scale," and "Large Scale" based on duration, impact on occupants, and potential hazards (dust, noise, vibration, utility disruption).
• Control Measures: Outlines specific safety protocols and requirements for each activity type, including communication plans, hazard analysis, LOTO procedures, and site visits.
• Affected Adjacent Area Assessment: Requires identification and coordination with adjacent areas to prevent disruption.
• Infection Control Risk Assessment (ICRA): Determines if an ICRA is needed based on potential patient infection risks.
• PCRA Permit: A fillable permit summarizing the activity, type, control measures, and required safety plans (e.g., excavation, dust control).

This document outlines the safety and risk management requirements that contractors must adhere to for the specified activity. Bidders should review the activity type, associated control measures, and required safety plans to understand the safety obligations and potential impacts on their work. The PCRA permit details the specific safety plans that need to be in place and available to workers.

Form / Attachment / Pricing Sheet

This document is a template for bidders to provide past performance references as required by the solicitation. It is intended to standardize the information submitted by offerors regarding their performance on previous government or commercial contracts.

• Sections for up to three separate past performance references.
• Fields to capture: Name of Government or Commercial Organization, Address, Contract Number, Brief Description of Work.
• Options to indicate if the contractor performed as a Prime Contractor or Sub-Contractor.
• Spaces for Dates of Performance and Total Contract Value.
• Questions regarding terminations for cause/default and contract discrepancy reports, with options to circle YES/NO and provide explanations.
• Contact information for the Point of Contact/COR, including Title, Telephone Number, and Email Address.
• A general comments section for each reference.

Bidders must complete this form accurately and thoroughly for each relevant past performance reference they wish to submit. The information provided will be used by the government to evaluate the bidder's demonstrated capability and experience in performing similar work, which is a critical factor in the overall evaluation of proposals.