F-16 Circuit Card Assembly

Form / Attachment / Pricing Sheet

This document is a Contract Data Requirements List (CDRL) detailing a specific data item required for a contract. It outlines the requirements for a Contractor's Counterfeit Prevention Plan (CPP).

• Data Item No.: A001
• Title: Counterfeit Prevention Plan (CPP)
• Contract/PR No.: FD2020-26-00254
• System/Item: Circuit Card Assembly
• Requiring Office: 416 SCMS/GUEAA
• Submission Deadline: NLT thirty (30) calendar days after contract award.
• Resubmission: If remediation is required, comments will be provided within fourteen (14) calendar days after receipt. Resubmission is due NLT seven (7) calendar days after receipt of Government comments.
• Format: Contractor Format Acceptable.
• Submission Method: Via e-mail to alan.christenson.1@us.af.mil.
• Distribution Statement: "D" - Distribution authorized to the Department of Defense and U.S. DoD contractors only (Critical technology).
• Export Control Warning: Applies to printed and electronic technical documents containing export-controlled technical data.

This CDRL specifies a mandatory deliverable for the contractor: a Counterfeit Prevention Plan. Bidders must understand the requirements for developing, submitting, and potentially revising this plan, including the specific content, format, submission method, and deadlines. The distribution and export control statements are also critical for compliance.

Form / Attachment / Pricing Sheet

This document is a Contract Data Requirements List (CDRL) that specifies the data items required from a contractor for a specific contract line item. It details the type of data, its title, subtitle, authority for acquisition, contract reference, and submission requirements.

• Data Item No. A002: Test/Inspection Report
• Subtitle: Contractor First Article Testing
• Authority: DI-NDTI-80809B/T
• Contract Reference: CLIN for Data
• Requiring Office: 416 SCMS/GUEAA
• Frequency: 1 TIME
• Submission: First submission due 14 days after contract award (LT), subsequent submissions as specified in Block 16.
• Distribution Statement: "B" - Distribution authorized to U.S. Government agencies (Test & Evaluation). Other requests must be referred to 416 SCMS/GUEAA.

This CDRL outlines the specific reporting and testing requirements for the "Circuit Card Assembly" (System/Item D). Bidders should pay close attention to the "Remarks" section (Block 16) for detailed clarifications on:

• How dimensions and tolerances should be reported.
• Requirements for identifying and certifying materials used in the "First Article" item.
• Requirements for identifying and certifying material processing.
• References to other forms (HILL AFB Form 462, AFMC IMT 260).
• Export control warnings and distribution statements.
• Specific instructions for providing test times, locations, and the format/delivery of the First Article Test Report.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the requirements for preservation, packaging, and marking of materials for military and international trade.

• Adherence to AFMC Form 158, Packing Requirements, and various Department of Defense (DoD) Military Standards, ASTM International, and ANSI standards.
• Development of military packaging using MIL-STD 2073-1, including specific codes and instructions for special or hazardous materials.
• Application of commercial packaging standards (ASTM D3951) when prescribed.
• Use of MIL-STD 129 for military marking, labeling, and shipment planning.
• Compliance with International Standards for Phytosanitary Measures (ISPM 15) for wood packaging material used in international trade.
• Handling of electrostatic sensitive materials according to MIL-STD-2073-1, MIL-HDBK-773, ANSI/ESD S20.20, ESD TR20.20, and MIL-STD-129.
• Adherence to Item Type Storage Code (ITSC) requirements.
• Application of MIL-STD-147 for palletized unit loads and MIL-STD-648 for specialized shipping containers.
• Preparation, labeling, certification, and compliance for hazardous materials shipments according to various international and US regulations (ICAO, CFR Title 49, IATA, IMDG, AFMAN24-604).
• Submission of Safety Data Sheets (SDS) per FED-STD-313 and compliance with FAR clause 52.223-3.
• Use of the Special Packaging Instructions Retrieval & Exchange System (SPIRES) for packaging requirements.
• Safeguarding and replacement of reusable containers.
• Reporting of discrepancies using Web Supply Discrepancy Report (WebSDR).
• Accessing specifications and standards via the ASSIST website.

Not explicitly stated in this section, but implies ongoing contract requirements.

• Compliance with specific military standards, government forms, and regulations.
• Documentation and reporting requirements, including SDS and WebSDR.
• Use of specific websites for information retrieval (SPIRES, ASSIST).
• Contact information provided for AFSC packaging support.

Form / Attachment / Pricing Sheet

This document is an Engineering Data List (EDL) that specifies engineering drawings and related data for a "CIRCUIT CARD ASSEMBL". It details the documentation required for the "F-16" end item.

• Revision: 3
• Date: 01 AUG 2023
• Data Tech: Pusey, Brian D
• Manufacturer CAGE: 5Y043
• Manufacturer Name: HONEYWELL INTERNATIONAL INC.
• Organization/Office Symbol: 429 SCMS / GUMACA
• Reference Number: 7001644-49
• End Item: F-16
• Noun: CIRCUIT CARD ASSEMBL
• NSN: 5998016182981WF
• Engineering Drawing/Accomplishment Document: HILL AFB FORM 462 (Document Number 98747)
• Standard Engineering Text: Provided by Pusey, Brian D on 17 AUG 2023.
• Release Note: Release of data to foreign entities requires approval from the Foreign Disclosure Office.

This document is crucial for bidders as it outlines the specific engineering data and drawings associated with the "CIRCUIT CARD ASSEMBL" for the "F-16" end item. Bidders should review this list to understand the required documentation, the manufacturer, and any restrictions on data release. The "FURNISHED METHOD CODE LEGEND" provides context on how the data is supplied or should be acquired.

Solicitation / RFP / RFQ

This solicitation is for the manufacturing of bare printed circuit boards (PCBs). The acquisition is restricted to qualified sources: Innovative Solutions and Support Inc (CAGE OEUWO) and Lockheed Martin Corp. (CAGE 81755).

• Manufacturing of bare printed circuit boards.

• Specific item details are provided for Item No. 0001, including NSN, Manufacturer, Part Number, and associated documents.

• First Article (FA) testing is required for items 0001AA, 0001AB, 0001AC, and 0001AD.

• Production articles are required for items 0001AC and 0001AD.

• Counterfeit Prevention Plan (CDRL A001) and First Article Test Report (CDRL A002) are required.

• Packaging and marking shall comply with MIL-STD-130 and MIL-STD-129/ASTM-D-3951.

• Supply chain traceability documentation is required.

• Unique Item Identification (UID) is required for items with an acquisition cost of $5,000 or more.

• Contract type is not explicitly stated but implied to be Firm Fixed Price for production articles.

• Period of Performance: Not explicitly stated, but delivery dates are mentioned for specific items (e.g., 25 OCT 2027).

• Estimated Value: Not stated.

• Offers are due by 13-MAR-2026, 2:00 PM.

• Proposals will be evaluated based on Price or Cost as the primary factor, with other factors being significantly less important.

• First Article testing costs will be a factor in the evaluation.

• Offers must be submitted electronically via Wide Area WorkFlow (WAWF).

• This acquisition is restricted to qualified sources: Innovative Solutions and Support Inc and Lockheed Martin Corp.

• US Contractors Only.

• Less than a truckload shipment is acceptable.

• Early and partial deliveries are acceptable at no increase in cost.

• The contractor must inform the Contract Administrator immediately if it cannot meet the contractual delivery schedule.

• The solicitation includes numerous FAR and DFARS clauses related to various aspects of contracting, including quality assurance, packaging, payment, and representations and certifications.