F-16 Gyroscope

Solicitation / RFP / RFQ

This solicitation (SPRHA4-26-R-0469) is for the procurement of F-16 Gyroscopes, Rate units, which provide pitch, roll, and yaw inputs to the flight control system. This acquisition replaces solicitation SPRHA4-26-Q-0469.

• The primary item is an F-16 Gyroscope, Rate unit (NSN: 6615-01-042-7834 WF).

• The total purchase quantity is six (6) each.

• Offers can be submitted in two ways:

  • Bid A: Includes a First Article (FA) plus 5 production articles.
  • Bid B: Includes an FA waiver plus 6 production articles.

• Manufacturing Qualification Requirements must be met. Contractors must submit a qualification package.

• On-Time Delivery (OTD) is a key focus, with specific requirements outlined.

• Range pricing is requested for quantities from 1-2 EA up to 16+ EA.

• The solicitation issue date is May 18, 2026.

• The offer due date is June 17, 2026, 11:59 PM.

• The contract is expected to be awarded to qualified sources, specifically Atlantic Inertial Systems and Lockheed Martin.

• Part(s) must be manufactured by a qualified source.

• The contract type is not explicitly stated but implies fixed-price based on the "Firm Fixed Price" notations for line items.

• Proposals are due by June 17, 2026, 11:59 PM.

• Evaluation will be based on "Price or Cost" as the primary factor (Order of Importance: 01).

• Offers must include pricing for the specified quantity ranges.

• A First Article Test Report is required for Bid A.

• This acquisition is restricted to qualified sources: Atlantic Inertial Systems (CAGE 63395) and Lockheed Martin (CAGE 81755).

• The solicitation is for an unrestricted acquisition.

• Associated documents include Engineering Data List, Engineering Data Requirements, CDRL First Article Test Report, CDRL Counterfeit Prevention Plan, Packaging Statement of Work, and Manufacturing Qualification Requirements.

• The solicitation replaces SPRHA4-26-Q-0469.

Solicitation / RFP / RFQ

This document outlines the "Manufacturing Qualification Requirements" for the Rate Gyroscope Assembly (P/N: 16C0705-3), intended for the F-16 A/B/C/D Flight Controls. It details the criteria and processes potential suppliers must meet to be considered a qualified source for this item.

• Prequalification Notice: Offerors must notify the government of their intent to qualify.

• Facilities, Testing, and Inspection Capabilities: Offerors must certify they possess or have access to necessary facilities, equipment, and personnel, and must make them available for government evaluation.

• Data Verification: Offerors must provide a complete data package, including drawings and specifications (e.g., Lockheed Martin drawing 16C0705).

• Manufacture/Process Verification: The item must be manufactured to ESA-approved engineering/technical data, complying with UID requirements. Offerors must provide data showing quality, performance, and environmental evaluations.

• Test and Evaluation/Verification: Offerors must submit a qualification test plan and a complete test report for government approval. Government inspection of testing processes is permitted, with 45 days' notice required for testing.

• Qualification Article: An offeror must provide a pre-contract award qualification article for form, fit, and function evaluation.

• Qualification Requirement Cost Estimate: Estimated costs for testing and evaluation are $350,000.00.

• Qualification Time Completion Estimate: Engineering support activity estimates 365 days for qualification completion.

• Eligibility: Offerors must be fully qualified before the contract award date to be eligible. Qualification does not guarantee award.

• Evaluation of Proposals Not Previously Qualified: Offerors must fulfill all qualification requirements before the specified award date to be considered an approved source.

• Not explicitly stated, but the document focuses on the technical and manufacturing qualifications required.

• Source Qualification Waiver Requirements: Criteria are provided for potential waivers of qualification requirements, including prior supply to the government, qualification on similar parts, or previous qualification status.

• Offerors will be notified of qualification article testing results within 180 days. Successful qualification does not guarantee contract award.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the requirements for preservation, packaging, and marking of materials for military packaging as prescribed in the contract.

• Adherence to AFMC Form 158, Packing Requirements, and various Department of Defense (DoD) Military Standards, ASTM, and ANSI standards.

• Development of military packaging using MIL-STD-2073-1, including specific codes and requirements for special groups and hazardous materials.

• Application of preservation, packaging, packing, and markings for specific commodities as prescribed on AFMC Form 158.

• Use of MIL-STD-129 for military marking, labels, and requirements for materiel shipment and storage, including the affixing of DD Form 1574 or 1574-1 tags.

• Compliance with International Standards for Phytosanitary Measures (ISPM 15) for wood packaging material used in international trade.

• Adherence to procedures for electrostatic material, including MIL-STD-2073-1, MIL-HDBK-773, ANSI/ESD S20.20, and ESD TR20.20.

• Application of MIL-STD-147 for palletized unit loads and MIL-STD-648 for specialized shipping containers.

• Preparation, labeling, certification, and compliance with regulations for hazardous materials shipments (ICAO, CFR Title 49, IATA, IMDG).

• Preparation and submission of Safety Data Sheets (SDS) IAW FED-STD-313.

• Retrieval of Special Packaging Instructions (SPI) via the SPIRES website.

• Safeguarding, disposal, and replacement of reusable shipping containers.

• Reporting discrepancies using Web Supply Discrepancy Report (WebSDR).

• Compliance with specified military standards, regulations, and forms.

• Proper documentation and certification for hazardous materials.

• Use of approved packaging materials and methods.

Not explicitly stated in this section of the SOW.

• Use of the latest revisions of applicable standards and regulations.
• Acquisition of Competent Authority Approval (CAA) for functions requiring prior consent under Hazardous Material Regulation.
• Provision of Contractor's Test Report and signed certification for package configuration.
• Contacting Product Support Manager and Administering Contracting Office (ACO) for reusable container disposition.
• Requesting a WebSDR account for reporting discrepancies.
• Accessing ASSIST website for specifications, standards, and data item descriptions.

Form / Attachment / Pricing Sheet

This document is a Contract Data Requirements List (CDRL) for Data Item A001, "Counterfeit Prevention Plan (CPP)". It outlines the requirements for the contractor to submit this plan.

• Data Item Number: A001
• Title: Counterfeit Prevention Plan (CPP)
• Authority: DI-MISC-81832
• Contract Reference: CLIN for Data
• Requiring Office: 416 SCMS/GUEAA
• Submission Deadline: Within thirty (30) calendar days after contract award.
• Government Review: Government comments will be provided within fourteen (14) calendar days after receipt. Resubmission is required within seven (7) calendar days after receipt of comments.
• Format: Contractor format is acceptable.
• Submission Method: Via e-mail to alan.christenson.1@us.af.mil.
• Distribution Statement: "D" - Authorized for DoD and U.S. DoD contractors only. Other requests must be referred to 416 SCMS/GUEAA.
• Export Control: Contains export-controlled technical data, subject to severe criminal penalties if disseminated improperly.

This CDRL specifies the requirement for a Counterfeit Prevention Plan, its submission deadline, format, and distribution limitations. Bidders must understand these requirements to ensure compliance if awarded the contract.

Form / Attachment / Pricing Sheet

This document is a Contract Data Requirements List (CDRL) detailing the "Test/Inspection Report" (Data Item No. B001) for the "First Article Test Report" related to the "Grip Assembly, Contr" system/item under Contract/PR No. FD2020-26-00469.

• Data Item No.: B001
• Title: Test/Inspection Report
• Subtitle: First Article Test Report
• Contract Line Item No.: 0001AA
• System/Item: Grip Assembly, Contr
• Contract Reference: CLIN for Data
• Requiring Office: 416 SCMS/GUEAA
• Frequency: OTIME (Once per contract)
• Submission Dates: To be determined (See Block 16)
• Format Requirements: Contractor's format is acceptable. Specific clarifications are provided in Block 16 regarding dimensions, tolerances, material identification and certification, and material processing certification.
• Distribution Statement: "B" (Distribution authorized to U.S. Government agencies (Test & Evaluation) (Mar 2026). Other requests to be referred to 416 SCMS/GUEAA, Hill AFB, UT 84056-5825).
• Export Control: Warning regarding export-restricted technical data and dissemination requirements.

This CDRL specifies the requirements for the First Article Test Report, including its content, format, submission instructions, and distribution. Bidders should review Block 16 for detailed requirements on how the report should be prepared, including specific information on dimensions, materials, and processing. The document also outlines the submission method (physical shipment to a specific address and e-mail delivery) and the applicable distribution and export control warnings. This information is crucial for understanding the deliverables expected for the "First Article" testing phase.

Form / Attachment / Pricing Sheet

This document is an Engineering Data List (EDL) for the F-16 END ITEM, specifically the GYROSCOPE, RATE (NSN: 6615010427834WF). It lists various engineering drawings, specifications, and material requirements associated with this component.

• Document Numbers: Lists specific engineering drawing numbers (e.g., 16C0705, 16VC006, FPS-1001) and their revision levels.
• Specifications & Requirements: Includes details on sealing specifications, general purpose adhesives, installation and assembly, welding, contractor finish specifications, metal removal limitations, electrical bonding requirements, torque values, sealant application, electrical connectors, rivet installation, penetrant inspection, hardness and conductivity testing, and marking requirements.
• Material Requirements: References qualified material lists (FQML) for various compounds, tapes, and primers.
• Furnished Method Codes: Indicates how the data is supplied (e.g., furnished with solicitation, government document, contractor must acquire).

This EDL is crucial for bidders as it details the specific technical documentation, specifications, and material requirements that govern the gyroscope, rate component for the F-16. Vendors must ensure their proposals and technical approaches align with these listed requirements, including any referenced qualified material lists and specifications. It provides a comprehensive overview of the technical data package necessary for this part.

Form / Attachment / Pricing Sheet

This document, "ENGINEERING DATA REQUIREMENTS (ATTACHMENT 'A')", outlines specific instructions and requirements for the manufacture of a Rate Gyro Assembly-Flight Control for the F-16.

• Item: Rate Gyro Assembly-Flight Control
• Part Number: 16C0705-3
• National Stock Number: 6615-01-042-7834WF
• Applicable Specifications/Standards: Lists specifications and standards to be used in lieu of indicated data. Superseded data will not be furnished unless specified.
• Sources/Materials: Only listed sources/materials are permitted; substitutions require prior approval.
• Deviations: Deviations from specifications require prior approval.
• Marking: Marking requirements are per MIL-STD-130 in lieu of FPS-3008.

This attachment provides critical manufacturing and technical data for a specific component. Bidders must adhere to these requirements, including specified part numbers, national stock numbers, applicable standards, material sources, and marking instructions. Any deviations or substitutions require explicit approval from the cognizant engineering activity. This information is essential for accurate proposal preparation and ensuring compliance with manufacturing specifications.

Solicitation / RFP / RFQ

This document outlines the "Manufacturing Qualification Requirements" for the Rate Gyroscope Assembly (NSN: 6615-01-042-7834, P/N: 16C0705-3), intended for the F-16 A/B/C/D Flight Controls application. It details the prerequisites and processes a potential source must satisfy to be considered a qualified supplier for this item.

• Prequalification Notice: Offerors must notify the government of their intent to qualify.

• Facilities & Capabilities: Offerors must certify they possess or have access to the necessary facilities, equipment, tooling, and personnel for manufacturing, testing, inspection, packaging, and storage.

• Data Verification: A complete data package, including drawings and specifications (minimum Lockheed Martin drawing 16C0705), must be verified.

• Manufacturing/Process Verification: The item must be manufactured to government requirements, including Unique Identification (UID) per DFARS 211.274. Data showing quality, performance, and environmental evaluations must be provided.

• Test and Evaluation: Offerors must submit a qualification test plan and a complete test report for government approval. The government reserves the right to inspect testing processes and facilities.

• Qualification Article: An offeror must provide a pre-contract award qualification article for form, fit, and function evaluation.

• Estimated Qualification Cost: $350,000.00

• Estimated Qualification Time: 365 days

• Eligibility: Offerors must be fully qualified before the contract award date. Qualification approval does not guarantee contract award.

• Timeline: Award will not be delayed to allow vendors to qualify. Offerors must meet qualification standards before the specified award date.

• Not explicitly stated, but the document refers to "Prequalification Notice/Sources Sought" and notification to the "Small Business Office."

• Source Qualification Waiver Requirements: Specific criteria (QWC1-QWC6) are provided for potential waivers of qualification requirements, including prior supply to government/OEM, qualification on similar parts, or previous qualification status.