F-16 Horizontal Stabilizer

Form / Attachment / Pricing Sheet

This document outlines the Manufacturing Qualification Requirements for the Horizontal Stabilizer (P/N: 16T7461-835) for the F-16 Aircraft. It details the criteria and processes potential sources must satisfy to become a qualified supplier for this component.

• Prequalification Notice/Sources Sought: Offerors must notify the government of their intent to qualify.
• Facilities, Testing, and Inspection Capabilities: Offerors must certify and make available their facilities, equipment, tooling, and personnel for government evaluation.
• Data Verification: Offerors must provide a complete data package, including drawings and specifications.
• Manufacture/Process Verification: Offerors must demonstrate compliance with government requirements, including Unique Identification (UID) and potentially Critical Safety Item (CSI) management.
• Master Tooling Verification: Offerors must demonstrate access to and ability to use Lockheed Martin Master Tooling.
• Test and Evaluation/Verification: Offerors must submit a qualification test plan and report at their own expense for government approval.
• Qualification Article Verification: Offerors must provide a pre-contract award qualification article for evaluation.
• Cost and Time Estimates: Estimated costs for testing and evaluation are $5,000, with an estimated engineering support time of 270 days.
• Source Qualification Waiver Criteria (QWC): Specific criteria are provided for potential waivers of qualification requirements, including prior supply to government, mirror-image parts, subassemblies, earlier dash numbers, similar items, or previously qualified entities.

This document is critical for any bidder intending to supply the Horizontal Stabilizer. It outlines the mandatory steps, capabilities, and verifications required to be considered an approved source. Bidders must understand these requirements to assess their ability to qualify and to prepare the necessary documentation and testing for submission. Failure to meet these qualification requirements will make a bidder ineligible for contract award. The document also details specific waiver criteria that may allow certain sources to bypass some of the standard qualification processes.

Form / Attachment / Pricing Sheet

This document is a Contract Data Requirements List (CDRL) that specifies data items to be delivered by the contractor under a contract. It outlines the specific data requirements, including titles, descriptions, authorities, and distribution instructions.

• Data Item Number and Title: Identifies specific data deliverables (e.g., "Test/Inspection Report").
• Authority: Specifies the source document or requirement for the data item.
• Contract Reference: Links the data item to a specific contract or task.
• Distribution: Details where and how the data should be distributed, including addressees and number of copies.
• Submission Requirements: Outlines dates for first and subsequent submissions, and frequency.
• Export Control Warning: Highlights that technical data may be export-controlled and must be marked and disseminated according to specific regulations.
• Specific Instructions: Provides guidance on how to prepare and submit certain data items, such as the "Test/Inspection Report" via email.

This CDRL is crucial for bidders to understand the specific documentation and reporting requirements associated with the contract. It details what data must be produced, in what format, and by when, directly impacting proposal preparation and contract performance. Bidders must review these requirements to accurately estimate costs and ensure compliance.

Solicitation / RFP / RFQ

This is a Request for Quotation (RFQ) for a Firm Fixed Price contract for a specific aircraft part: STABILIZER, HORIZONTAL, F-16, NSN: 1560-01-619-8981 WF. The acquisition is restricted to qualified sources: ACT CAGE: 1XKR3 & Lockheed CAGE: 81755. Contractors must submit a qualification package to become a qualified source.

• The primary deliverable is the STABILIZER, HORIZONTAL, F-16.

• A First Article (FA) is required for Item No. 0001AB (Production Article).

• A First Article Test Report (FATR) is required for Item No. 0001AA (First Article Test Report).

• Items must be marked in accordance with MIL-STD-130.

• Supply chain traceability documentation is required.

• Packaging and marking must comply with MIL-STD-129 and ASTM-D-3951.

• Contract type: Firm Fixed Price.

• Period of performance: Not explicitly stated, but prices must be held firm for 120 days.

• Estimated value: Not stated.

• Quotations are due by Close of Business on February 23, 2026.

• Evaluation will be based on Price or Cost as the primary factor.

• The First Article Test Report is to be submitted concurrently with the First Article.

• Offers will be evaluated based on "Evaluation Factors for Award" and "Evaluation Cost Factor for First Article."

• This acquisition is restricted to qualified sources: ACT CAGE: 1XKR3 & Lockheed CAGE: 81755.

• Solicitation approved for U.S. Contractors Only.

• NAICS CODE: 336413, SIZE STD: 1,250.

• Less than a truckload shipment is acceptable.

• Early delivery is acceptable at no increase in cost to the Government.

• Contractors must submit a qualification package to become a qualified source.

Form / Attachment / Pricing Sheet

This document is a Special Packaging Instruction (SPI) for the "STABILIZER, HORIZONTAL" (SPI NO. F01-141-1064). It details the specific requirements for preserving, packing, marking, and closing the item for shipment.

• Item Nomenclature: STABILIZER, HORIZONTAL
• SPI Number: F01-141-1064
• Preservation: IAW MIL-STD-2073-1, using MIL-PRF-16173 (Grade 2) and MIL-PRF-23827.
• Packing: Specified by levels (A and B) with detailed dimensions, gross cubic feet, gross weight, and fragility ratings.
• Marking: IAW MIL-STD-129, including the SPI number on the container.
• Closure: IAW ASTM D6256 for Level A and B.
• Bill of Materials: Lists numerous components (e.g., handles, supports, cleats, fasteners) with quantities, dimensions, and material specifications.
• International Standards: Compliance with ISPM No. 15 for wood packaging material is required for international shipments.
• Caution Notices: Provides important information regarding repackaging, NSN listings, material substitution, and overseas/FMS packaging requirements.

This document is critical for any bidder involved in the packaging, handling, or shipping of the "STABILIZER, HORIZONTAL." It outlines the precise materials, methods, and standards that must be followed to ensure the item is properly protected during transit and meets all regulatory requirements, particularly for international shipments. Failure to comply with these instructions could lead to rejection of the shipment or additional costs.

Form / Attachment / Pricing Sheet

This document, "ENGINEERING DATA REQUIREMENTS (ATTACHMENT "A")", provides specific instructions and requirements for the manufacture of a Horizontal Stabilizer Assembly (Part Number: 16T7461-835) for the F-16 aircraft.

• Part Number: 16T7461-835
• National Stock Number: 1560-01-619-8981WF
• Critical Safety Item (CSI): The item is identified as a CSI, with details available in EO 14C5251-H.
• Trailing Edge Reinforcement: Detailed instructions are provided for reinforcing the trailing edge of the horizontal stabilizer assembly, including specific repair procedures (55-12-02-11) and references to TO 1F-16C-3-4 Section 2.1.1.5.13.
• Materials and Standards: Specifies materials (e.g., SAE AMS-QQ-A-250/4, 301 Stainless Steel) and standards (e.g., MIL-STD-130) to be used, with requirements for prior approval for any substitutions.
• Manufacturing Data: References specific IGES LOFT data files (16T7465-3, 16T7469-9, etc.) for manufacturing, and notes that certain documents (16PR100, 16PR006) are not furnished or required.
• Safety Warnings: Includes warnings regarding potential injury from drilling/milling operations and handling graphite-epoxy skins, recommending appropriate personal protective equipment (PPE) such as industrial goggles and protective gloves.
• Repair Procedure Details: Outlines steps for preparing holes, manufacturing and installing stainless steel straps on the trailing edge, and using specific rivets (JK5689C05NXXB/C9634) and sealants (AMS-3276 or AMS-3277).

This document is crucial for any bidder intending to manufacture or repair the F-16 Horizontal Stabilizer Assembly. It details the exact specifications, materials, manufacturing processes, and safety precautions required. Bidders must adhere strictly to these engineering data requirements, including the specific repair procedures for the trailing edge and the use of specified materials and fasteners. Failure to comply with these requirements could lead to non-conforming parts or safety issues.

Form / Attachment / Pricing Sheet

This document is an Engineering Data List (EDL) for the F-16 End Item, specifically related to the Horizontal Stabilizer. It serves as a comprehensive list of all drawings, parts, materials, and processes required for the assembly and manufacturing of this component.

• Part Numbers and Descriptions: Lists specific part numbers (e.g., 16T7461, M16T7462) and their corresponding descriptions (e.g., HORIZONTAL STABILIZER ASSEMBLY, RIB, TIP-HORIZ STABILIZER).
• Manufacturer Information: Identifies Lockheed Martin Corporation as the manufacturer with CAGE code 81755.
• Revision History: Indicates the document is Revision 7, with a data tech and revision date provided.
• Furnished Method Codes: Details how each item is supplied (e.g., 'S' for furnished with solicitation, 'M' for required with contract award).
• Remarks: Includes specific notes, such as the revision level of associated Production Work List (W/PL) documents or qualified material lists.

This EDL is crucial for bidders as it outlines the exact components, materials, and processes that constitute the Horizontal Stabilizer for the F-16. It provides a detailed breakdown of the technical requirements and specifications that any potential supplier or manufacturer would need to adhere to. Understanding this list is essential for accurately estimating costs, planning production, and ensuring compliance with the government's specifications for this critical aircraft component.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the requirements for preservation, packaging, and marking of materials for military and commercial shipments.

• Adherence to various military standards (MIL-STD) and industry standards (ASTM, ANSI, IATA, IMDG) for packaging and marking.

• Development of military packaging using MIL-STD-2073-1, including special packaging instructions for specific item categories and hazardous materials.

• Application of commercial packaging practices per ASTM D3951 when prescribed.

• Implementation of MIL-STD-129 for military marking, labels, and shipment planning.

• Compliance with International Standards for Phytosanitary Measures (ISPM 15) for wood packaging material used in international trade.

• Adherence to procedures for electrostatic discharge (ESD) sensitive materials.

• Application of MIL-STD-147 for palletized unit loads and MIL-STD-648 for specialized shipping containers.

• Proper preparation, labeling, certification, and compliance for hazardous materials shipments according to various regulations (ICAO, CFR, IATA, IMDG).

• Submission of Safety Data Sheets (SDS) per FED-STD-313.

• Utilization of the SPIRES website for packaging instructions and reporting discrepancies via WebSDR.

• Management and replacement of reusable containers.

• Packaging must meet specified standards and requirements.

• Hazardous material shipments must comply with all relevant regulations.

• Discrepancies in packaging must be reported.

Not explicitly stated in this section of the SOW, but implied to cover the duration of the contract.

• Use of the most recent revisions of applicable documents unless otherwise specified.
• Specific contact information for AFSC (406 SCMS/GULAA) is provided for inquiries.