F-16 Horizontal Stabilizers

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the requirements for preservation, packaging, and marking of materials for military contracts.

• Adherence to AFMC Form 158, Packing Requirements, DoD Military Standards, ASTM, ANSI, and DoD specifications.
• Development of military packaging using MIL-STD-2073-1, including documentation via CDRL and handling of hazardous materials.
• Application of commercial packaging standards per ASTM D3951 when prescribed.
• Use of MIL-STD-129 for military marking, labels, and shipment planning, including specific tags and labels for materiel condition.
• Compliance with International Standards for Phytosanitary Measures (ISPM 15) for wood packaging material used in international trade.
• Adherence to electrostatic discharge (ESD) protective packaging procedures for sensitive electronic components per various MIL-STDs and ANSI standards.
• Application of MIL-STD-147 for bonded palletized unit loads and MIL-STD-648 for specialized shipping containers.
• Preparation, labeling, certification, and compliance with regulations for hazardous materials shipments (ICAO, CFR Title 49, IATA, IMDG).
• Submission of Safety Data Sheets (SDS) per FED-STD-313 and compliance with FAR clause 52.223-3.
• Retrieval of Special Packaging Instructions (SPI) via the SPIRES website.
• Management and replacement of reusable shipping containers.
• Reporting of discrepancies using Web Supply Discrepancy Report (WebSDR).

Not explicitly detailed, but adherence to specified standards and regulations implies performance requirements.

Not specified in this document.

• Use of the latest revisions of applicable standards and regulations.
• Acquisition of Competent Authority Approval (CAA) for hazardous material shipments.
• Provision of Contractor's Test Report and signed certification for hazardous material packaging.
• Contacting Product Support Manager and ACO for disposition of unserviceable reusable containers.
• Use of ASSIST website for specifications, standards, and data item descriptions.

Form / Attachment / Pricing Sheet

This document outlines the Manufacturing Qualification Requirements for the Horizontal Stabilizer (P/N: 16T7461-835) for the F-16 application. It details the criteria that potential sources must meet to become a qualified supplier for this part.

• Prequalification Notice/Sources Sought: Offerors must notify the government of their intent to qualify.
• Facilities, Testing, and Inspection Capabilities: Offerors must certify and make available their facilities, equipment, tooling, and personnel for government evaluation.
• Data Verification: Offerors must provide a complete data package, including drawings and specifications.
• Manufacture/Process Verification: Offerors must demonstrate compliance with government requirements, including Unique Identification (UID) and management of Critical Safety Items (CSIs).
• Master Tooling Verification: Offerors must prove access to and ability to use Lockheed Martin Master Tooling.
• Test and Evaluation/Verification: Offerors must submit a qualification test plan and report at their own expense. Government may witness testing.
• Qualification Article Verification: Offerors must provide a pre-contract award qualification article for form, fit, and function evaluation.
• Qualification Requirement Cost Estimate: Estimated cost for testing and evaluation is $5,000.
• Qualification Time Completion Estimate: Estimated engineering support activity is 270 days.
• Source Qualification Waiver Requirements: Criteria for applying for a waiver of qualification requirements are provided (e.g., prior supply to government, qualification on similar parts).

This document is critical for any bidder intending to supply the Horizontal Stabilizer (P/N: 16T7461-835). It outlines the mandatory steps, capabilities, and costs required to become an approved source. Failure to meet these qualification requirements will make a bidder ineligible for contract award. The document also details potential waivers for certain qualification criteria.

Form / Attachment / Pricing Sheet

This document, "Special Packaging Instruction (SPI)," provides detailed instructions for the packaging of a "Stabilizer, Horizontal" (Part or Drawing No. 16T7461-809, National Stock No. 1560-01-190-9049). It outlines the specific materials, methods, and dimensions required to ensure the item is properly preserved, packed, marked, and protected during transit and storage.

• Preservation and Cleaning: Specifies methods like MIL-STD-2073-1 and MIL-PRF-16173 Code 2 preservative.
• Packing Materials: Details various components, including handles, cleats, washers, bolts, supports, cushions, and shrouds, with their respective sizes and specifications (e.g., ASTM D6199, MIL-S-21041).
• Container Specifications: Provides dimensions for both interior (CNTR I.D.) and exterior (CNTR O.D.) container sizes for Level A and Level B packaging.
• Marking: Requires marking with SPI No. F01-141-1064 and adherence to MIL-STD-129.
• International Standards: Addresses phytosanitary measures for wood packaging material (ISPM NO. 15), requiring heat-treated or de-barked wood for international shipments.
• Revisions: Notes a revision (LTR N) that changed outside dimensions and added "NOT 5" to P/N 19.

This document is critical for bidders who are responsible for packaging the "Stabilizer, Horizontal." It dictates the exact packaging requirements, materials, and standards that must be met. Failure to comply with these instructions could lead to non-conforming shipments. Bidders must carefully review the bill of materials, dimensions, and special instructions to accurately quote packaging costs and ensure compliance during contract performance.

Form / Attachment / Pricing Sheet

This document, "ENGINEERING DATA REQUIREMENTS (ATTACHMENT "A")", provides specific instructions and requirements for the manufacture of a Horizontal Stabilizer Assembly (Part Number: 16T7461-835, NSN: 1560-01-619-8981WF) for the F-16 aircraft.

• Materials and Standards: Specifies materials (e.g., SAE AMS-QQ-A-250/4) and standards to be used, with substitutions requiring prior approval.
• Critical Safety Item (CSI): Identifies the assembly as a CSI.
• Trailing Edge Reinforcement Repair: Details the process for reinforcing the trailing edge of the horizontal stabilizer assembly, including specific repair procedures (55-12-02-11) and instructions for manufacturing and installing stainless steel straps using specific rivets and sealing compounds.
• Safety Warnings: Includes warnings regarding potential hazards during drilling and milling operations (eye protection required) and handling of graphite-epoxy skins (gloves recommended).
• Manufacturing Data: References specific IGES loft data files for manufacturing purposes.

This document is crucial for any bidder intending to manufacture or supply the F-16 Horizontal Stabilizer Assembly. It outlines the exact technical specifications, materials, critical safety requirements, and detailed repair procedures that must be followed. Bidders must ensure their manufacturing processes and materials comply with these requirements, as deviations require prior approval. The detailed instructions for the trailing edge reinforcement repair are a key component for compliance.

Solicitation / RFP / RFQ

This solicitation is for an Indefinite Delivery, Indefinite Quantity (IDIQ) contract for the purchase of Horizontal Stabilizers used on the F-16 aircraft. The contract will have a five-year ordering period.

• Procurement of Horizontal Stabilizers (NSN: 1560-01-619-8981 WF).

• Requires adherence to various military standards for packaging, marking, and inspection (e.g., MIL-STD-130, MIL-STD-129, ASTM-D-3951).

• Specific requirements for Item Unique Identification (IUID) and supply chain traceability documentation.

• First Article Test Report (FATR) is required for certain line items.

• Compliance with cybersecurity requirements, including NIST SP 800-171 DoD Assessment.

• Contract Type: Indefinite Delivery, Indefinite Quantity (IDIQ).

• Contract Minimum: 15 Each.

• Contract Maximum: 100 Each.

• Ordering Period: Five years from contract award.

• Best Estimated Quantity (BEQ) for Ordering Period (Year 1) ranges from 16 to 25 each.

• Offers are due by February 20, 2026, at 2:00 PM.

• Evaluation will be based on Lowest Price Technically Acceptable (LPTA).

• Technical Capability will be rated as Acceptable or Unacceptable based on approved source status.

• Pricing will be evaluated for completeness, reasonableness, and balance.

• The Government may reject unrealistic offers.

• This acquisition is restricted to qualified sources: Lockheed Martin (CAGE 81755) and Aerospace & Commercial Technologies (CAGE 1XKR3).

• Contractors desiring to become a qualified source must submit a qualification package.

• Solicitation is approved for U.S. Contractors Only.

• Reference Section L for Instructions to Offerors and Section M for Evaluation Factors for Award.

• All referenced documents are available on the System for Award Management (SAM) website.

Form / Attachment / Pricing Sheet

This document is a Contract Data Requirements List (CDRL) for a "Test/Inspection Report" (Data Item A001) with a "First Article Test Report" subtitle. It specifies the requirements for delivering this data item as part of a contract.

• Data Item Number: A001
• Title: Test/Inspection Report
• Subtitle: First Article Test Report
• Contract Reference: CLIN for Data
• Authority: DI-NDTI-80809B/T
• Frequency: OTIME (One Time)
• Submission Dates: To be determined (See Block 16)
• Distribution: Authorized for U.S. Government agencies (Test & Evaluation), with specific instructions for referrals.

This CDRL outlines the specific requirements for a "First Article Test Report." Bidders need to understand the format, content, and submission details for this report as detailed in the remarks section. Key clarifications include:

• Dimensions and tolerances must be listed with corresponding actual readings.
• Materials used and processing (plating, heat treatment, etc.) must be identified and certified.
• A copy of the purchase order for any outsourced processing is required.
• The report must be marked with the appropriate export control warning if applicable.
• Specific instructions are provided for contractor testing and government testing submissions, including packaging and shipping details.
• A copy of the report must be delivered via email to a specified address.

Form / Attachment / Pricing Sheet

This document is an Engineering Data List (EDL) for the F-16 End Item, specifically the Horizontal Stabilizer. It serves as a comprehensive list of all components, materials, and processes required for the assembly and manufacturing of this part. Bidders may use this document to understand the Bill of Materials (BOM) and associated technical data required for potential future solicitations related to the F-16 Horizontal Stabilizer.

• Lists specific part numbers, descriptions, and manufacturers (CAGE code).
• Details the revision status and furnishing method for each item.
• Includes remarks such as "W/PL ISSUE" and "QUALIFIED MAT'L LIST" which indicate specific versions or approved material lists.
• Provides a legend for "FURNISHED METHOD CODE" explaining how each item is supplied (e.g., with solicitation, government document, or contractor acquired).

This EDL provides a detailed breakdown of the components and materials that constitute the F-16 Horizontal Stabilizer. It is crucial for potential bidders to review this list to understand the scope of work, material requirements, and potential suppliers or specifications they would need to adhere to if bidding on contracts related to this assembly. The document indicates that many items are furnished with the solicitation or are government documents, suggesting that specific technical data packages are available.