F-16 Transfer Unit, Advance

Solicitation / RFP / RFQ

This solicitation is for "Computer Storage Device Manufacturing" and is restricted to a qualified source: GE Aviation Systems LLC (CAGE 35351). Offers will be received until 9 MAR 2026, 11:59 PM. Late offers are subject to late proposal provisions.

• The primary item is a "Computer Storage Device Manufacturing" component, identified by NSN: 7025-01-616-5061 WF TRANSFER UNIT,ADVAN F-16.

• Quantity: 9 EA

• Manufacturer Part Numbers: 187684-002, D7621000001-01, D7621000001-01A.

• Associated Document(s): FD20202600221 (Line Item 0002).

• Priority: R.

• Limitations of Liability: Other Than High Value Item.

• Inspection: Origin.

• Acceptance: Origin Receiving Report Required.

• Quality Assurance: Higher Level Contract Quality Requirements (ISO 9001:2000).

• IUID Required: Yes.

• Physical Item Markings: IAW MIL-STD-130.

• Transportation From Continental United States (CONUS) Sources, F.O.B. Origin.

• Required Delivery: A SW3210, 9 EA, ARO 14 Months.

• Proposed Delivery: A SW3210, 9 EA, ARO 14 Months.

• Ship To (Customer): DLA DISTRIBUTION DEPOT HILL, UT 84056-5734.

• Item No. 0002 is "Not Separately Priced" with a quantity of 1 LO, NSP.

• Counterfeit Prevention Plan: CDRL A001.

• Associated Document(s) for Item 0002: FD20202600221 (Line Item 0001).

• Inspection: Destination.

• Acceptance: Destination.

• Inspection/Acceptance Report: Letter of Transmittal.

• Quality Assurance: IAW 1423.

• Required Delivery for Item 0002: +IAW1423, 1 LO, *30 Calendar Days.

• Proposed Delivery for Item 0002: +IAW1423, 1 LO.

• Contract Type: Solicitation Type is Negotiated (RFP).

• Period of Performance: Not explicitly stated, but offers are to be held firm for 120 calendar days.

• Estimated Value: Not stated.

• Proposal Submission Deadline: 9 MAR 2026, 11:59 PM.

• Evaluation Criteria: Not detailed in this section.

• This acquisition is restricted to qualified source(s): GE Aviation Systems LLC.

• Less than a truckload shipment is acceptable and authorized.

• Early and partial deliveries are acceptable at no increase in cost to the Government.

• The contractor shall inform the Contract Administrator immediately if it cannot meet the contractual delivery schedule.

Form / Attachment / Pricing Sheet

This document is a Contract Data Requirements List (CDRL) that specifies the "Counterfeit Prevention Plan" (CPP) as a required data item for the "Transfer Unit, Advan" system under contract number FD2020-26-00221.

• Data Item Number: A001
• Title: Counterfeit Prevention Plan (CPP)
• Authority: DI-MISC-81832
• Requiring Office: 416 SCMS/GUEAA
• Submission Deadline: NLT thirty (30) calendar days after contract award.
• Resubmission: If remediation is required, comments will be provided within fourteen (14) calendar days. Resubmission is due NLT seven (7) calendar days after receipt of Government comments.
• Format: Contractor Format is acceptable.
• Submission Method: Via e-mail to justin.allred.2@us.af.mil, accompanied by a Letter of Transmittal.
• Distribution Statement: "D" (Distribution authorized to the Department of Defense and U.S. DoD contractors only).
• Export Control Warning: Applicable, as per DoD Instruction 5230.24.

This CDRL mandates the submission of a Counterfeit Prevention Plan. Bidders must understand the requirements for developing, submitting, and potentially revising this plan, including the specified deadlines and submission procedures, to ensure compliance with the contract.

Form / Attachment / Pricing Sheet

This document is an Engineering Data List (EDL) that specifies engineering drawings and associated data required for the "TRANSFER UNIT, ADVAN" end item (F-16). It serves as a reference for what technical data is available or required for the contract.

• Manufacturer: GE AVIATION SYSTEMS LLC (CAGE: 86360)
• End Item: F-16
• Noun: TRANSFER UNIT, ADVAN
• Drawing Number: 200733803
• Revision: D
• Label, Unique Identification (UID): W/EO'S 10A1433-H, 10A1486-H
• Furnished Method Code Legend: Provides codes indicating how data is supplied (e.g., 'S' - Furnished with Solicitation, 'M' - Stable Base Drawing Required).

This EDL indicates which engineering drawings and data are associated with the "TRANSFER UNIT, ADVAN" for the F-16 program. Bidders should review this list to understand the technical documentation requirements and availability. Specifically, the "Furnished Method Code Legend" will inform bidders about how this data is provided or what might be required from them, potentially impacting proposal preparation and contract performance.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the requirements for preservation, packaging, and marking of materials for the Department of Defense (DoD).

• Adherence to AFMC Form 158, Packing Requirements.
• Utilization of various military standards and industry practices for packaging, including:
  • MIL-STD 2073-1 for military packaging development.
  • ASTM D3951 for commercial packaging.
  • MIL-STD 129 for military marking for shipment and storage.
  • ISPM 15 for international wood packaging material regulations.
  • MIL-HDBK-773, ANSI/ESD S20.20, and ESD TR20.20 for electrostatic discharge sensitive materials.
• Compliance with Item Type Storage Code (ITSC) requirements.
• Application of MIL-STD-147 for palletized unit loads and MIL-STD-648 for specialized shipping containers.
• Proper preparation, labeling, certification, and compliance for hazardous materials shipments according to international and U.S. regulations (ICAO, CFR Title 49, IATA, IMDG, AFMAN24-604).
• Preparation and submission of Safety Data Sheets (SDS) per FED-STD-313.
• Safeguarding and managing reusable containers.
• Reporting discrepancies using Web Supply Discrepancy Report (WebSDR).
• Accessing specifications and standards via the ASSIST website.

Not explicitly stated in this document, but references contract requirements and AFMC Form 158.

• Specific packaging and marking requirements based on material type (e.g., hazardous, electrostatic sensitive, palletized loads).
• Procedures for reporting discrepancies and managing reusable containers.
• Compliance with numerous referenced government and industry standards and regulations.