F-16 Transmitter, Pressure

Form / Attachment / Pricing Sheet

This document is an Engineering Data List (EDL) that specifies engineering drawings, documents, and data required for the F-16 end item, specifically the Transmitter, Pressure. It details the "NOUN" for the item and provides reference numbers and NSN. The list indicates which engineering instructions and formats are associated with specific documents.

• End Item: F-16
• Noun: TRANSMITTER, PRESSURE
• Manufacturer: LOCKHEED MARTIN CORPORATION
• Documents Listed: Includes items like "HILL AFB FORM 462", "LABEL, UNIQUE IDENTIFICATION, CONSTRUCT 1 '18S'", "SENSOR, PNEUMATIC", and "INTERPRETATION, FORMATS".
• Furnished Method Codes: Indicates how the data is supplied (e.g., 'S' - Furnished with Solicitation, 'X' - Data Supplied (Not in JEDMICS)).

This EDL is crucial for bidders to understand the specific engineering data and documentation required for the "Transmitter, Pressure" component of the F-16. It clarifies what documents are furnished with the solicitation and what might need to be acquired or is not available, directly impacting proposal preparation and understanding of technical requirements.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the requirements for preservation, packaging, and marking of materials for the Department of Defense (DoD).

• Adherence to AFMC Form 158, Packing Requirements, and various DoD Military Standards, ASTM International, and ANSI standards.
• Development of military packaging using MIL-STD-2073-1, including special packaging instructions and hazardous materials packaging.
• Application of commercial packaging standards (ASTM D3951) when prescribed.
• Use of MIL-STD-129 for military marking, labeling, and shipment planning, including DD Form 1574/1574-1 tags.
• Compliance with International Standards for Phytosanitary Measures (ISPM 15) for wood packaging material used in international trade.
• Adherence to procedures for electrostatic material packaging (MIL-STD-2073-1, MIL-HDBK-773, ANSI/ESD S20.20, ESD TR20.20, MIL-STD-129).
• Use of Item Type Storage Code (ITSC) as per AFMCI24-201.
• Application of MIL-STD-147 for palletized unit loads and MIL-STD-648 for specialized shipping containers.
• Preparation, labeling, certification, and compliance for hazardous materials shipments according to various regulations (ICAO, CFR Title 49, IATA, IMDG, AFMAN24-604).
• Preparation and submission of Safety Data Sheets (SDS) per FED-STD-313 and compliance with FAR clause 52.223-3.
• Use of the Special Packaging Instructions Retrieval & Exchange System (SPIRES) for packaging requirements.
• Safeguarding and managing reusable containers according to AFMC Form 158.
• Reporting discrepancies via Web Supply Discrepancy Report (WebSDR).
• Accessing specifications and standards via the ASSIST website.

Not explicitly detailed in this section, but adherence to specified standards implies performance requirements.

Not specified in this document.

• Compliance with the latest revisions of all referenced standards and regulations.
• Obtaining Competent Authority Approval (CAA) for hazardous material packaging functions.
• Providing Contractor's Test Report and signed certification for hazardous material packaging.
• Contacting the Product Support Manager and Administering Contracting Officer (ACO) for reusable container disposition.
• Requesting a WebSDR account for reporting discrepancies.
• Utilizing the AFSC 406 SCMS/GULAA contact for inquiries.

Solicitation / RFP / RFQ

This document is a Request for Quotation (RFQ) for "Transmitter, Pressure" with NSN 6685-01-149-6398. The acquisition is restricted to qualified sources: Honeywell International Inc (CAGE 64547) and Lockheed Martin Corp. (CAGE 81755). Contractors not currently qualified must submit a qualification package.

• The primary item is a "Transmitter, Pressure".

• Manufacturing Qualification Requirements are attached.

• Supply chain traceability documentation is required.

• Items must be marked in accordance with MIL-STD-130.

• Packaging and marking must comply with MIL-STD-129 or ASTM-D-3951.

• Unique Item Identification (UID) is required for items with an acquisition cost of $5,000 or more, or as otherwise identified.

• Contract type is not explicitly stated but implied to be Fixed Price based on "Firm Fixed Price" in the schedule.

• Delivery is required by "SEE SCHEDULE" with a proposed delivery date of 31 DEC 2027 for one unit.

• The government intends to purchase a total of 1 EA of Transmitter, Pressure.

• Prices must be held firm for 120 days.

• Quotations are due by Close of Business on 28 JAN 2026.

• Evaluation will be based on Price or Cost as the primary factor.

• Quantity range pricing is requested.

• Offers will be evaluated based on the total quantities needed at the time of award.

• FMS (Foreign Military Sales) customers are involved, leading to potential volatility in quantities.

• This acquisition is restricted to qualified sources: Honeywell International Inc (CAGE 64547) and Lockheed Martin Corp. (CAGE 81755).

• Contractors desiring to become a qualified source must submit a qualification package.

• NAICS Code: 334513, Size Standard: 750 employees.

• US Contractors Only.

• Additional provisions and representations are attached.

• Page 3 requests quantity range pricing for quantities from 1 EA up to 16 EA+.

• Early delivery is acceptable at no increase in cost to the Government.

• Less than a truckload shipment is acceptable and authorized.

Solicitation / RFP / RFQ

This document outlines the "Manufacturing Qualification Requirements" for a specific part (NSN: 6685-01-149-6398, P/N: 16VC001001-5 or 2101382-3-1) intended for F-16 application, designated as a "PSA" (Product Service Agreement). It details the criteria and processes potential sources must meet to be qualified.

• Prequalification Notice: Offerors must notify the government of their intent to qualify.

• Facilities & Capabilities: Offerors must certify they have or can access necessary facilities and equipment for manufacturing, inspection, testing, packaging, and storage. Government inspection is permitted.

• Data Verification: A complete data package, including drawings (specifically Lockheed Martin drawing 16VC001001) and specifications, must be verified.

• Manufacture/Process Verification: The item must be manufactured according to ESA-approved engineering/technical data, complying with Unique Identification (UID) requirements (DFARS 211.274). Offerors must provide data on quality, performance, and environmental evaluations, and identify material sources and internal process standards. Management processes for Critical Safety Items (CSIs) must be demonstrated.

• Test and Evaluation: Offerors must, at their own expense, prepare and submit a qualification test plan/procedure for government approval. A complete test report is required post-testing for review and approval. The government may witness testing and requires 30 days' advance notice.

• Qualification Article: A pre-contract award qualification article, compliant with Drawing 16VC001001, must be provided for form, fit, and function evaluation.

• Source Qualification Waiver Criteria: Specific criteria (QWC1-QWC5) are provided for potential sources to apply for waivers of qualification requirements, including prior supply to government/OEM, qualification for assemblies/subassemblies, earlier dash numbers, similar items, or previously qualified but restructured entities.

• Estimated Cost for Qualification: $65,000 for testing and evaluation.

• Estimated Time for Qualification: 730 days for engineering support activity.

• Qualification Article Evaluation: The qualification article will be evaluated for compatibility and manufacturing capability. Offerors will be notified of qualification status within 545 days of submitting for testing.

• Eligibility: Full qualification is required for contract award. Requirements must be met before the specified award date.

• Award Timing: The award will not be delayed to allow vendors to meet qualification standards.

• Not explicitly stated, but the process is for becoming a "qualified source."

• Successful qualification does not guarantee contract award.

• A post-contract award first article exhibit may be required to verify production capability.