FC306 Laundry Room

Amendment / Modification

This document is Amendment 0003 to solicitation N40085-26-R-9006, dated 01/06/26. It provides answers to contractor requests for information regarding the "26-9008, FC306 Laundry Room" project.

• The amendment addresses questions related to coordination study (26-05-73) and switchboard specifications (26-24-13).

• It clarifies that both spec sections are required.

• It identifies Switchboard 'MDP' location (first floor mechanical room 137) and references drawing sheets E-401 (location) and E-601 (schedule and characteristics).

• It states that Switchboard 'MDP' will require a new breaker for panel 'P2'.

• It notes that the breaker may have adjustable trip settings based on contractor selection and installation.

• Power analysis is required for the new panel per NFPA 70E & UFC 3-560-01.

• The time and date for receipt of proposals remains unchanged.

• Contractors are reminded to acknowledge this amendment with their proposal submission, as failure to do so may result in rejection.

Amendment / Modification

• Extends the solicitation deadline for N40085-26-R-9008 until February 25, 2026, at 1500.

• Provides updated information regarding findings of mold and moisture in Building FC306, specifically in Room 235, West Window area.

• The findings include discoloration, delaminated paint, the presence of Aspergillus/penicillium-like spores, and high concentrations of Cladosporium on the central air vent and west windowsill, indicating active fungal growth.

• The proposal submission deadline is changed.

• The scope of work may be affected by the newly identified mold remediation needs.

• Bidders are advised to acknowledge this amendment when submitting their proposals.

• The amendment provides an opportunity for bidders to review additional needs and adjust their proposal prices accordingly for the services to remove mold.

Amendment / Modification

This amendment (0001) provides answers to requests for information regarding the solicitation N40085-26-R-9008 for FC306 Laundry Room.

Key clarifications include:

• Painting: Walls and ceilings are not entirely painted. Existing exposed structure is painted white. New piping/conduit against the ceiling will receive a specific ceiling paint (P-2), or be used for touchups. Two new partitions enclosing dryer venting and washer piping will be painted to match existing beige/light taupe walls (P-1).

• Air Grille: A typo in the air device schedule on drawing M-601 is corrected. Where TG-1 is listed, it should be SG-1. For SG-1, bidders should provide what is listed for TG-1 on M-601.

• Clarifications pertain to painting specifications and air distribution schedules.

• The time and date for receipt of proposals remains unchanged.

• Bidders are reminded that failure to acknowledge this amendment may result in rejection of their proposal.

Solicitation / RFP / RFQ

This document is a solicitation for the FC306 Laundry Room project at MCB Camp Lejeune, North Carolina. The estimated cost range is between $100,000.00 and $250,000.00, with a contract completion date of 180 days after award. The government is procuring services related to a laundry room facility.

• The specific scope of work is not detailed in this document, but it pertains to a laundry room facility.

• Compliance with the Buy American Requirement-Construction Materials is mandatory.

• Adherence to specified minimum wage rates as per Executive Orders 14026 and 13658 is required.

• Davis-Bacon Act requirements apply.

• Contract Type: Not specified, but award will be based on Lowest Price.

• Period of Performance: 180 days after award.

• Estimated Cost Range: $100,000.00 - $250,000.00.

• Liquidated Damages: $220 per Calendar Day.

• Proposal Due Date: February 06, 2026, at 2:00 PM EST.

• Proposals are to be submitted via email to NAVFAC_ML_ROICCCampLejeune-Bids1@navy.mil AND sharon.e.humphrey.civ@us.navy.mil.

• Basis for Award: Lowest Price.

• Proposal Acceptance Period: 60 days from receipt of offers.

• Requests for Information (RFIs) cut-off: January 23, 2026, by 3:00 PM EST.

• Evaluation will consider the Buy American statute requirements.

• ONLY THE FOLLOWING LIST OF CONTRACTORS MAY SUBMIT A PROPOSAL FOR THIS PROJECT:

  • T.E. Davis Construction Company
  • Joyce & Associates Construction, Inc.
  • Olympic Enterprises, Inc.
  • Quadrant Construction

• Funding may not be available, and the government will not reimburse for any effort or proposal costs.

• A site visit is scheduled for January 15, 2026, at 09:30 AM at Front Door FC306, Camp Lejeune, NC.

• Bid bonds are required based on dollar values: none for proposals <$40K; payment bond for proposals $40K-$150K; bid, payment, and performance bonds for proposals >$150K.

• Specifications and drawings are posted on https://sam.gov/.

Specification

This document contains specifications for various sections related to the "CL FC306 USCG Laundry Room" project. It details requirements for:

• Division 01 - General Requirements: Covers general project requirements, including summary of work, work restrictions, price and payment procedures, administrative requirements, contractor access and use of premises, electronic construction and facility support contract management systems, transfer and acceptance of military real property, construction progress documentation, submittal procedures, governmental safety requirements, quality control, and temporary construction facilities and controls.
• Division 02 - Existing Conditions: Includes demolition requirements.
• Division 05 - Metals: Specifies cold-formed metal framing.
• Division 07 - Thermal and Moisture Protection: Covers flashing and sheet metal, firestopping, and joint sealants.
• Division 08 - Openings: Details access doors and panels, and metal wall louvers.
• Division 09 - Finishes: Includes gypsum board and paints and coatings.
• Division 22 - Plumbing: Covers general plumbing requirements.
• Division 23 - HVAC: Addresses basic mechanical materials and methods, and air distribution.
• Division 26 - Electrical: Outlines common work results for electrical systems, interior distribution systems, and power system studies.
• Division 27 - Telecommunications: Covers telecommunication cabling systems.
• Division 30 - GIS Data Deliverables: Specifies requirements for collecting and delivering geospatial data.
• Division 41 - Access Doors and Panels: Details requirements for access doors and panels.
• Division 45 - Metal Wall Louvers: Specifies requirements for metal wall louvers.
• Division 92 - Gypsum Board: Provides criteria for partitions and patching of gypsum board.
• Division 99 - Paints and Coatings: Outlines requirements for painting.
• Division 22 00 00 - Plumbing, General Purpose: Covers general plumbing requirements.
• Division 23 03 00.00 - Basic Mechanical Materials and Methods: Details general mechanical materials and methods.
• Division 26 05 00.00 - Common Work Results for Electrical: Outlines common requirements for electrical work.
• Division 26 05 73 - Power System Studies: Details requirements for power system studies.
• Division 26 20 00 - Interior Distribution System: Covers interior electrical distribution systems.
• Division 26 24 13 - Switchboards: Specifies requirements for switchboards.
• Division 27 00 00 - Telecommunications: Covers telecommunication systems.
• Division 78 30.00 22 - GIS Data Deliverables: Specifies requirements for GIS data deliverables.

This document appears to be a compilation of various specification sections for a construction project at the "CL FC306 USCG Laundry Room" at Marine Corps Base Camp Lejeune. It outlines detailed technical requirements, materials, installation procedures, and quality assurance measures for a wide range of building systems and components.

Form / Attachment / Pricing Sheet

This document contains the "FC306 USCG LAUNDRY ROOM FINAL DESIGN" drawings for the Marine Corps Base Camp Lejeune. It includes architectural, mechanical, and electrical plans, details, and schedules.

• Cover Sheet (G-001): Provides an overview of the project, index of drawings, location maps, and revision information.
• Architectural Drawings (A-001, A-002, A-101): Detail general notes, abbreviations, materials, symbols, partition types, and floor plans.
• Mechanical Drawings (M-001, M-101, M-102, M-401, M-402, M-501, M-601): Cover symbols, abbreviations, general notes, floor plans, enlarged plans, details, and schedules for mechanical systems.
• Electrical Drawings (E-001, E-101, E-102, E-401, E-402, E-501, E-601): Include symbols, abbreviations, general notes, floor plans, enlarged plans, details, and schedules for electrical systems, including panel schedules and riser diagrams.
• Demolition Drawings (ED101, ED401): Specifically outline demolition work for the second floor.

These drawings are essential for understanding the scope of work, design intent, and technical specifications for the construction or renovation of the FC306 USCG Laundry Room. Bidders will use these documents to prepare bids, plan construction activities, and ensure compliance with all specified requirements.