Fermilab-Construction Services for IERC CCD Space Humidificaion-372698

Form / Attachment / Pricing Sheet

This document, "Exhibit C_SECTION 010010 - GENERAL REQUIREMENTS," outlines the general requirements for a construction project at Fermi National Accelerator Laboratory (Fermilab). It supplements the FFDG Subcontract General Provisions and General Terms and Conditions for Construction.

• Part 1: General covers purpose, summary, references, site location (Fermi National Accelerator Laboratory, Batavia, Illinois), description of work (installing two new humidification units in the IERC CCD lab, extending water supply and electrical power), materials/equipment furnished by FFDG (none anticipated), Buy American Act compliance, services furnished by FFDG (electrical power, drinking water, toilet facilities, utility locates), and items affecting work planning (safety representative, training, erosion control, waste disposal, property protection, ongoing operations).
• Part 2: Products is not used.
• Part 3: Execution details notice to proceed, construction schedule (milestones for material submittals, punch list completion, and project completion), quality control and installation, and acceptance procedures (interim and final inspections, punch lists).
• Attachments include a Request for Information (RFI) form (Attachment A) and a QA/QC Punch List Item Status form (Attachment B).

This document is crucial for bidders as it defines the overarching requirements, scope of work, site conditions, FFDG-provided services, and execution expectations for the project. It details the process for RFIs, quality control, and project acceptance, which are essential for proposal preparation and project execution. Bidders must understand these general requirements to accurately estimate costs, plan resources, and ensure compliance with FFDG's standards and procedures.

Form / Attachment / Pricing Sheet

This document, "Exhibit D_SECTION 013100 - ESH REQUIREMENTS," outlines the Environment, Safety, and Health (ESH) requirements for subcontractors working on Fermi Forward Discovery Group, LLC (FFDG) projects at the Fermi National Accelerator Laboratory (Fermilab) site. It details the policies, procedures, and regulations that subcontractors must adhere to ensure a safe and environmentally sound work environment.

• General ES&H Policy: FFDG's commitment to protecting the environment, safety, and health of all individuals on site.
• Applicable Codes and Regulations: References to federal, state, and local regulations, including 10 CFR Part 851 (Worker Safety and Health Program) and 10 CFR Part 835 (Occupational Radiation Protection).
• Subcontractor Requirements: Detailed expectations for subcontractor ES&H programs, including pre-award and post-award submittals (e.g., ES&H Certification, Safety Information Questionnaires, Site-Specific ES&H Plans, Hazard Analyses).
• Training: Requirements for subcontractor training, including general orientation, specific hazard training, and FFDG-provided training.
• Specific Hazards and Controls: Comprehensive sections on managing various hazards such as fall protection, excavation, confined spaces, hot work, electrical work, radiation, hazardous materials, and waste disposal.
• Emergency Procedures: Guidelines for incident reporting, emergency response, and safety pauses/stop-work authority.
• Attachments: Includes guidance on Silica, Daily Work Planning, Construction ES&H Certification, and Hazard Analysis.

This document is critical for any potential bidder to understand the stringent safety and environmental compliance requirements associated with working at the Fermilab site. Bidders must assess their ability to meet these requirements, including the necessary training, documentation, and safety protocols, as failure to comply can result in penalties or disqualification. The detailed requirements for hazard analysis, training, and specific safety procedures will significantly impact proposal preparation and project execution planning.

Form / Attachment / Pricing Sheet

This document, "Submittal for Review Transmittal" (Attachment A), is a form that subcontractors must use when submitting shop drawings, material samples, and operations/maintenance manuals for review by Fermi Forward Discovery Group, LLC (FFDG). It serves as a standardized method for documenting and tracking submittals.

• TO: Fermi National Accelerator Laboratory
• FROM: Subcontractor's Name, Address, City and State
• Date & Project No.: Fields for date and project number.
• Attn & Project Name: Fields for specific attention and project name.
• Submittal Item No.: Sequential numbering for each item submitted.
• Specification Section or Drawing No. (If Applicable): Reference to relevant project documentation.
• Description: A space to describe the item being submitted.
• Comments: A section for additional remarks.

Bidders (subcontractors) must use this form for all submittals as required by the solicitation. It is essential for understanding the process of submitting documentation for review, approval, and tracking of materials and work progress. The form is referenced in Section 013300 of the specifications, which details the overall submittal process, including review timelines and actions (e.g., "No Exception Taken," "Revise & Resubmit," "Make Corrections & Proceed," "Rejected").

Form / Attachment / Pricing Sheet

This document, "Exhibit G_SECTION 220500 - COMMON WORK RESULTS FOR PLUMBING," outlines the specifications and requirements for escutcheons to be used in plumbing work. It details the types of escutcheons, manufacturers, and installation procedures.

• Section Includes: Escutcheons.
• Action Submittals: Requires Product Data including construction details, material descriptions, dimensions, finishes, and operating characteristics.
• Manufacturers: Lists BrassCraft Manufacturing Co., Jones Stephens Corp., and ProFlo as available manufacturers, subject to compliance with requirements.
• Escutcheon Types: Specifies One-Piece, Steel Type with a polished, chrome-plated finish and setscrew fastener.
• Installation: Details the installation of escutcheons for piping penetrations in walls, ceilings, and finished floors, ensuring a close fit around pipes and insulation, and covering openings.
• Field Quality Control: Requires replacement of broken or damaged escutcheons and floor plates with new materials.
• Application: Specifies escutcheons for insulated piping and bare piping at wall and floor penetrations in finished spaces, both requiring a one-piece, steel, polished, chrome-plated finish.

Bidders should review this section to understand the specific requirements for escutcheons, including approved manufacturers, material types, finishes, and installation methods. This information is critical for accurate material procurement and ensuring compliance with the project's plumbing specifications.

Form / Attachment / Pricing Sheet

This document, "SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING," details the specifications for general-duty valves to be used in plumbing systems. It outlines requirements for materials, performance, installation, and specific types of valves, particularly ball valves.

• Scope: Covers ball valves for domestic hot and cold water systems.
• Definitions: Provides definitions for terms like CWP, EPDM, FKM, NBR, NRS, OS&Y, PTFE, RPTFE, and RS.
• Action Submittals: Requires product data including material descriptions, dimensions, and operating characteristics.
• Delivery, Storage, and Handling: Specifies procedures for preparing valves for shipping and precautions for storage.
• Performance Requirements: Mandates compliance with the Safe Drinking Water Act (SDWA), NSF 61/NSF 372 for potable water, and various ASME and AWWA standards for different valve types and connections. It also specifies dezincification-resistant materials for bronze valves.
• Ball Valves: Details requirements for lead-free, press-end, two-piece brass ball valves with full port and brass trim, including specific manufacturers, standards (MSS SP-110, MSS SP-145, IAPMO/ANSI Z1157), CWP rating (minimum 200 psig), body material, seats, stem, ball, and O-ring seal.
• Execution: Outlines examination, installation, and adjusting procedures for valves, emphasizing proper installation, support, access, and adherence to manufacturer instructions.

This document is critical for bidders to understand the exact specifications and requirements for the general-duty valves, particularly ball valves, that will be procured. It dictates material compliance, performance standards, and installation procedures, directly impacting product selection, proposal costing, and execution planning.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document specifies requirements for metal pipe hangers and supports, and strut support systems for plumbing piping and equipment.

• Covers metal pipe hangers and supports, and metal rod-type strut support systems.

• Details performance requirements, including structural integrity to withstand gravity loads and stresses per ASCE/SEI 7.

• Specifies requirements for supporting multiple pipes, pipe stands, and equipment.

• Outlines material requirements, primarily carbon steel per ASTM A1011/A1011M.

• Provides detailed installation instructions for hangers and supports, including considerations for thermal and seismic movement, load distribution, pipe slopes, and sway prevention.

• Includes specific requirements for insulated piping, such as the use of thermal-hanger shield inserts, protection saddles, and shield dimensions.

• Lists various types of pipe hangers, clamps, supports, and attachments (e.g., Clevis Hangers, Pipe Clamps, U-Bolts, Saddle Supports, Roller Hangers) with their applications and applicable MSS types.

• Addresses building attachments and saddles/shields for various piping configurations and conditions.

• Structural performance must comply with ASCE/SEI 7.

• Pipe deflections must not exceed limits allowed by ASME B31.9 for building services piping.

• Installation must allow controlled thermal and seismic movement.

Not specified in this document.

• Compliance with Section 078413 "Penetration Firestopping" for penetrations.
• Specific MSS SP-58 types and descriptions for various components.
• Consideration for coatings (galvanized, nonmetallic, plastic, epoxy) based on application and material contact.
• Use of padded hangers for piping subject to scratching.
• Use of thermal hanger-shield inserts for insulated piping.
• Specific dimensions and materials for pipe shields and inserts.

Form / Attachment / Pricing Sheet

This document, "SECTION 220553 - IDENTIFICATION FOR PLUMBING PIPING AND EQUIPMENT," details the specifications and requirements for labeling and tagging plumbing systems, piping, and equipment. It serves as a technical specification for materials and installation methods.

• Section Includes: Equipment labels, pipe labels, and valve tags.
• Manufacturers: Lists available manufacturers for equipment labels, pipe labels, and valve tags (e.g., Brady Corporation, Seton Identification Products).
• Materials & Specifications: Details material types (e.g., multilayer plastic, brass), thickness, temperature resistance, adhesive requirements, and fastener types.
• Labeling Requirements: Specifies label size, letter size based on viewing distance, and color schemes for different piping systems (e.g., Domestic Cold-Water Piping, Domestic Hot-Water Piping, Sanitary Waste Piping).
• Installation Requirements: Outlines general installation procedures, including surface preparation, coordination with other trades, and placement of labels and tags for visibility.
• Valve Tags: Specifies requirements for valve tags, including material, size, shape, and the need for a valve schedule in the operation and maintenance manual.

Bidders must understand these specifications to accurately price materials and labor for the identification and labeling of plumbing systems. Compliance with these detailed requirements is essential for successful project execution and acceptance. This document will inform the selection of appropriate labeling materials and the methods for their installation to meet project standards.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document specifies requirements for insulating domestic cold-water piping services.

• Installation of insulation for domestic cold-water piping.

• Includes requirements for product data submittals, scheduling of insulation application, and performance requirements for insulation and related materials.

• Details specific insulation materials, adhesives, sealants, and factory-applied jackets to be used.

• Outlines general installation requirements, including preparation, execution, and specific methods for straight pipes, fittings, valves, flanges, and unions.

• Surface-burning characteristics for insulation and related materials must meet ASTM E84 standards with a flame-spread index of 25 or less and a smoke-developed index of 50 or less.

• Insulation materials must comply with specified ASTM standards and not contain asbestos, lead, or mercury.

• Adhesives and sealants must be compatible with insulation materials and jackets.

• Field quality control includes inspections and testing, with potential for destructive examination.

Not explicitly stated in this document, but implies installation on systems after pressure testing and heat tracing.

• Insulation application must occur after pressure testing and heat tracing.
• Surfaces must be clean and dry before insulation application.
• Installation must ensure smooth, straight, and even surfaces, free of voids.
• Vapor barriers must be sealed appropriately.
• Specific methods for installing insulation on various components like fittings, valves, and flanges are detailed.
• Manufacturer's field service may be required for testing and inspections.

Form / Attachment / Pricing Sheet

This document, "SECTION 221116 - DOMESTIC WATER PIPING," outlines the specifications and requirements for the installation of domestic water piping systems. It details the materials, performance standards, and execution procedures necessary for compliance.

• Materials: Specifies Drawn-Temper Copper Tube (ASTM B88, Type L) and copper or bronze pressure-seal-joint fittings. Lists approved manufacturers for both tube and fittings.
• Performance Requirements: Mandates compliance with the U.S. Safe Drinking Water Act, NSF 61, and NSF 372, with a weighted average lead content at wetted surfaces not exceeding 0.25 percent.
• Execution: Details requirements for piping applications, installation of piping, joint construction (including pressure-sealed and extruded-tee connections), and the installation of hangers and supports.
• Connections & Cleaning: Covers connecting domestic water piping to exterior and interior water-service piping, identification of system components, and procedures for cleaning the piping system.
• Field Quality Control: Outlines inspection and testing requirements, including roughing-in and final inspections, and hydrostatic pressure testing for leaks and defects.

This document is crucial for bidders to understand the specific technical requirements and standards for domestic water piping. It defines the materials, installation methods, and quality control measures that must be adhered to, directly impacting the scope of work, material selection, and labor costs for any vendor bidding on this opportunity.

Form / Attachment / Pricing Sheet

This document, "Exhibit N_FFDG General Terms and Conditions for Construction (08.2025)", outlines the standard terms and conditions that will govern construction subcontracts issued by Fermi Forward Discovery Group, LLC (FFDG). It serves as a foundational document for potential bidders to understand the contractual framework and obligations.

• Definitions: Clarifies terms used throughout the subcontract.
• Scope of Subcontract: Defines the construction work to be performed under FFDG's prime contract with the Department of Energy (DOE) for the Fermi National Accelerator Laboratory.
• Payment Terms: Details progress payments, retainage, and final payment conditions.
• Changes and Modifications: Outlines the process for making changes to the work and the procedure for modification proposals, including price breakdowns.
• Indemnification and Liabilities: Specifies the Subcontractor's responsibility for losses, damages, and claims.
• Insurance and Bonds: Details requirements for performance and payment bonds, as well as insurance coverage.
• Laws and Regulations: Mandates compliance with all applicable federal, state, and local laws, including DOE regulations.
• Disputes: Establishes a process for resolving disputes, including step negotiations, mediation, and binding arbitration.
• Site and Facilities Access: Outlines requirements for personnel access to Fermilab facilities and computer systems.
• Environment, Safety & Health (ES&H): Requires adherence to all applicable ES&H laws and FFDG's requirements.
• Stop-Work and Suspension of Work: Details FFDG's rights to issue stop-work orders or suspend work.
• Incorporated Clauses: Lists numerous Federal Acquisition Regulation (FAR) and Department of Energy Acquisition Regulation (DEAR) clauses that are incorporated by reference, depending on subcontract value and type.

This document is critical for bidders to understand the legal and contractual framework of any construction subcontract offered by FFDG. It details key responsibilities, payment terms, dispute resolution processes, and compliance requirements. Bidders must review these terms to assess their ability to meet FFDG's contractual obligations and to inform their proposal pricing and strategy.

Form / Attachment / Pricing Sheet

This document outlines the mandatory insurance requirements for construction subcontractors working on projects at the Fermi National Accelerator Laboratory (Fermilab). It details the types of insurance, minimum coverage limits, and specific conditions that subcontractors must meet before commencing work.

• General Liability: Requires Commercial General Liability with specific limits for each occurrence and general aggregate, as well as products-completed operations aggregate.
• Automobile Liability: Mandates a combined single limit for any auto.
• Excess Liability: Specifies limits for excess liability coverage.
• Workers' Compensation & Employer's Liability: Requires statutory limits for Workers' Compensation and specific limits for Employer's Liability.
• Contractor's Pollution Liability: Outlines requirements for pollution liability coverage, including an annual aggregate.
• Contractor's Professional Liability: Applicable to design/build or construction management services.
• Supplemental Coverages: May require Aircraft Liability, Builder's Risk, and Broad Form cargo insurance.
• Additional Insureds: Policies must name Fermi Forward Discovery Group, LLC, the University of Chicago, Universities Research Association, Inc., and the U.S. Government as additional insureds.
• Evidence of Insurance: Subcontractors must provide certificates of compliance within ten days of subcontract signing and may need to provide certified copies of policies upon request.
• Indemnification: Subcontractors must indemnify FFDG for any losses due to non-compliance with insurance requirements.

This document is critical for any potential subcontractor involved in construction at Fermilab. Bidders must review these requirements carefully to ensure they can meet the specified insurance coverage and conditions. Failure to comply will prevent a subcontractor from undertaking the work and may result in indemnification obligations.

Form / Attachment / Pricing Sheet

This document is a Payment Bond (Standard Form 25A, Rev. 10/2023) required in connection with Fermi Forward Discovery, LLC subcontracts. It serves as a guarantee to the United States Government and Fermi Forward Discovery, LLC that the Principal will make prompt payment to all parties furnishing labor or materials for the work provided for in the contract.

• Principal: Information about the entity awarded the contract, including legal name, business address, type of organization, and state of incorporation.
• Surety(ies): Information about the surety or sureties providing the bond, including name, business address, state of incorporation, and liability limit.
• Penal Sum of Bond: The maximum amount the surety is liable for under the bond.
• Contract Date & Number: Details of the contract to which this bond pertains.
• Obligation: Outlines the binding commitment of the Principal and Surety(ies) to the Government and Fermi Forward Discovery, LLC.
• Conditions: Specifies the circumstances under which the bond obligation is void (i.e., prompt payment for labor and materials).
• Witness: Section for signatures and seals of the Principal and Surety(ies).

This form is crucial for understanding the financial security and payment assurances associated with the subcontract. Bidders may need to ensure their own payment bonds are in order or understand the requirements for the principal and surety involved in the contract. The document specifies that there shall be no deviation from this form and outlines the process for executing the bond, including requirements for corporate seals and evidence of authority for representatives.

Form / Attachment / Pricing Sheet

This document is Standard Form 25 (Rev. 10/2023), a Performance Bond, authorized for use in connection with Fermi Forward Discovery Group, LLC contracts. It serves as a guarantee that the Principal will fulfill the terms and conditions of the identified contract, including payment of applicable taxes.

• Principal: Requires the legal name and business address of the entity undertaking the contract.
• Surety(ies): Requires the name(s) and business address(es) of the surety or sureties providing the bond.
• Penal Sum of Bond: Specifies the maximum liability of the surety.
• Contract Details: Requires the Contract Date and Contract Number.
• Obligation & Conditions: Outlines the principal's and surety's commitment to the government and Fermi Forward Discovery Group, LLC, and the conditions under which the obligation is void.
• Execution: Spaces for signatures, names, titles, and seals of the Principal and Surety(ies).
• Instructions: Provides guidance on completing the form, including requirements for authorized signatories, corporate sureties, individual sureties, and seals.

This form is a required attachment for certain contracts. Bidders will need to understand the requirements for obtaining and completing this performance bond, including identifying a surety and specifying the penal sum. The instructions detail how the bond should be executed and submitted, which is crucial for compliance with contract requirements.

Form / Attachment / Pricing Sheet

This document is a questionnaire for subcontractors to provide their injury and illness data to Fermilab. It is used to assess subcontractor safety performance.

• Company Name, NAICS code, Address, Phone Number, Owner
• Interstate experience modification rate for the past three consecutive years.
• Workers' Compensation Carrier information.
• OSHA 300 log data for the past three years, including:
  • Total Number of Recordable Cases (RC)
  • Total Recordable Case Rate (TRCR)
  • Total Number of Cases with Days Away, Restricted or Job Transferred (DART)
  • Days Away, Restricted or Job Transferred Case Rate (DARTR)
  • Employee Hours Worked (EHW)
  • Number of Fatalities
• Calculation of average recordable case rate and average days away, restricted or transferred case rate over three years.
• Name and contact information for the individual responsible for safety.
• Certification of the accuracy of the provided information.

Bidders must complete and submit this questionnaire as part of their proposal or pre-qualification process. The data provided will be used by Fermilab to evaluate the bidder's safety record and compliance.

Form / Attachment / Pricing Sheet

This document is Standard Form 24 (Rev. 10/2023), a Bid Bond, also identified as FERMIFORWARD FORM FL-41 (1/7/2025). It is required when a bid guarantee is necessary for an opportunity. Bidders must use this form without deviation.

• Principal: The legal name and business address of the bidder.
• Surety(ies): The name and business address of the surety or sureties providing the bond.
• Penal Sum of Bond: The amount of the bond, expressed as a percentage of the bid price or a maximum dollar limitation.
• Bid Identification: Details such as Bid Date and Invitation Number.
• Obligation: Outlines the conditions under which the bond is void, typically upon acceptance of the bid and execution of further contractual documents and required bonds.
• Conditions: Specifies that the Principal has submitted the bid identified.
• Execution: Sections for signatures, names, titles, and corporate seals of the Principal and Surety(ies).

This form must be completed and submitted by bidders if a bid bond is required for the opportunity. It ensures the government is protected against costs incurred if a winning bidder fails to execute the contract or provide required bonds. Bidders need to ensure accurate completion with their legal name, business address, and the details of their surety. The instructions provide guidance on filling out the form, including requirements for corporate and individual sureties, and the expression of the penal sum.

Form / Attachment / Pricing Sheet

This document, Standard Form 1413 (Rev. 10/2023), is a "Statement and Acknowledgment" form. It is used to document the prime contractor's statement regarding subcontract awards and the subcontractor's acknowledgment of specific contract clauses.

• Part I - Statement Of Prime Contractor: Details the prime contract number, date awarded, prime contractor name and address, and confirms whether the prime contract includes the "Contract Work Hours and Safety Standards Act -- Overtime Compensation" clause. It also specifies the subcontractor's name, the description of work performed by the subcontractor, and the project location.
• Part II - Acknowledgment Of Subcontractor: Lists the contract clauses that the subcontractor acknowledges are included in their subcontract. These include clauses related to labor standards, wage rates, compensation, payrolls, disputes, apprentices, and debarment.

This form is relevant to bidders as it provides specific details about a subcontract awarded under the prime contract. It identifies the subcontractor, the nature of the work performed (Construction Services for IERC CCD Space Humidification), and the location (Fermilab, Batavia, IL). Bidders can use this information to understand the subcontracting structure and the types of clauses that are applicable to subcontractors on this opportunity.

Form / Attachment / Pricing Sheet

This document, "Proposal Certifications," is a collection of required certifications and representations that offerors must complete and submit as part of their proposal package. It ensures compliance with various federal regulations and contract requirements.

• Export/Import Control: Requires information on the offeror's export compliance point of contact and certifications regarding the nature of items furnished (e.g., specially designed for military/space, dual-use items).
• Buy American Act Certifications: Includes detailed clauses and certifications related to domestic preference for construction materials and end products, including definitions and criteria for determining domestic content and exceptions.
• Certificate of Independent Price Determination: Requires offerors to certify that prices were determined independently and without collusion.
• Certification and Disclosure Regarding Payments to Influence Federal Transactions: Requires certification that no federal appropriated funds were used to influence federal transactions and disclosure of lobbying activities.
• Certification Regarding Responsibility Matters: Requires offerors to certify their status regarding debarment, suspension, criminal convictions, and delinquent federal taxes.
• Patent Rights: Addresses patent rights for subcontracts, including provisions for small businesses, universities, and nonprofit organizations, and the process for requesting waivers.
• Combatting Trafficking in Persons: Requires certifications related to compliance plans and due diligence to prevent trafficking in persons, particularly for contracts involving work outside the United States.
• Revision Table: Details the history of changes to the document, including updates to clauses, thresholds, and administrative corrections.

Bidders must carefully review and complete all applicable sections of this document. Failure to provide accurate and complete certifications may result in non-compliance, rejection of the proposal, or other penalties. The document outlines critical requirements related to domestic sourcing, pricing integrity, ethical conduct, and compliance with federal regulations, all of which are essential for proposal preparation and contract award.

Form / Attachment / Pricing Sheet

This document, titled "Subcontractor Annual Representations & Certifications (SARC)," is a form required for potential subcontractors. It collects essential business and compliance information from offerors to ensure they meet federal requirements and are eligible for subcontract awards.

• Offeror Information: Collects details such as company name, address, contact information, EIN/TIN, DUNS number, NAICS industry code, and SAM.gov registration status.
• Business Category: Requires representation of ownership (U.S. or foreign), operating structure (corporation, LLC, partnership, etc.), and common parent information.
• Small Business Classifications: Allows offerors to self-certify as a small business and specify any applicable diversity categories (e.g., Woman-Owned, Veteran-Owned, HUBZone).
• Executive Compensation: Gathers information on the top five executives' names, titles, and compensation if certain federal funding thresholds are met.
• Offeror Responsibility: Addresses accounting system review status, general responsibility in accordance with FAR 9.104, and compliance with anti-trafficking regulations.
• Employment Eligibility Verification: Requires confirmation of E-Verify enrollment status.
• Export/Import Control Certifications: Certifies compliance with relevant U.S. laws and regulations.
• Federal Acquisition Regulation (FAR) Certifications: Includes certifications related to Equal Opportunity (EEO-1 filing), Affirmative Action, and limitations on pass-through charges.
• Certification: A final section for a duly authorized representative to certify the accuracy of all statements and acknowledge awareness of U.S. Government contracting programs.

Completion of this form is mandatory for any entity seeking to be a subcontractor. Bidders must accurately provide all requested information to demonstrate their eligibility, compliance, and business status. Failure to complete this form correctly may prevent an award. It also helps FermiForward assess subcontractor qualifications and compliance with federal regulations.

Forms / Attachments / Pricing Sheets

This document is a General Decision for the state of Illinois, specifically detailing wage determinations for Building and Residential construction projects in Du Page, Grundy, Kane, Kendall, Lake, McHenry, and Will Counties. It supersedes a previous determination and provides updated wage rates and fringe benefits applicable to federal government contracts subject to the Davis-Bacon Act and related Executive Orders.

• General Decision Number: IL20250008 dated 09/26/2025.
• Applicable Executive Orders: Executive Order 14026 and Executive Order 13658, outlining minimum wage requirements for covered contracts.
• Minimum Wage Rates: Specifies minimum hourly rates for various trades and their corresponding fringe benefits, applicable to different counties and construction types (Building and Residential).
• Effective Dates: Wage determinations are updated periodically, with the latest listed modification dated 09/26/2025.
• Contractor Information: Provides guidance on how to obtain additional information on contractor requirements and worker protections.

This document is crucial for bidders on federal construction projects within the specified geographic area and construction types. It establishes the minimum wage rates and fringe benefits that must be paid to laborers and mechanics employed on covered contracts. Bidders must ensure their proposals account for these prevailing wage rates to comply with federal labor laws and regulations.

Form / Attachment / Pricing Sheet

This document, "Exhibit F_014100 Quality Requirements," outlines the quality assurance and quality control requirements for subcontractors. It details the necessary components of a Corporate Quality Assurance Plan that must be submitted with a bid or proposal. It also provides a template (Appendix C) for contractors who do not have their own established QA plan.

• Purpose of QA Plan: To ensure all work meets contract requirements, applicable codes, and industry best practices.
• Roles, Responsibilities, and Authorities: Defines the QA Representative, Project Manager/Superintendent, and Foremen/Trade Supervisors.
• Quality Objectives: Compliance with specifications, prevention of rework, and consistent workmanship.
• Submittals and Approvals: Requirements for shop drawings, material certifications, product data, and handling deviations.
• Inspection and Testing: Includes pre-work, in-process, and final inspections, as well as general testing requirements.
• Nonconforming Work: Procedures for documentation, evaluation, and correction.
• Documentation and Records: Daily QA records, inspection checklists, test reports, etc.
• Corrective and Preventive Action: Processes for identifying root causes and implementing measures.
• Training and Communication: Requirements for training personnel on quality standards.
• Project Closeout: Procedures for punch lists, closeout documentation, and final QA review.

Bidders must review these quality requirements carefully. Submission of a Corporate Quality Assurance Plan (or adoption of the provided template) is a mandatory requirement. Failure to submit an adequate QA plan could result in a non-responsive bid. The document details the standards and processes that will be expected for quality management throughout the project.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the requirements for the installation of sanitary waste and vent piping systems.

• Section Includes: PVC pipe and fittings.

• Action Submittals: Requires product data for each type of product.

• Performance Requirements: Components and installation must withstand a minimum working pressure of 10 ft. head of water for soil, waste, and vent piping. "Withstand" implies remaining in place without separation when subjected to specified seismic forces.

• Piping Materials: Materials must bear the label or stamp of a specified testing agency. Specific compliance with "Piping Schedule" Article for applications, materials, and joining methods is required.

• PVC Pipe and Fittings: Specifies solid-wall PVC pipe (ASTM D2665), PVC socket fittings (ASTM D2665, ASTM D3311), and adhesive primer (ASTM F656). Lists approved manufacturers including Apollo Valves, Charlotte Pipe and Foundry Company, National Pipe and Plastic, Inc., North America Pipe Corporation, Rocky Mountain Colby Pipe Company, and Silver-line Plastics.

• Installation of Piping: Details general arrangement, installation in concealed and exposed locations, alignment with building walls, installation above accessible ceilings, allowance for valve servicing, and specific minimum slopes for horizontal sanitary waste piping (two percent downward).

• Joint Construction: Requires clean and dry joining surfaces for plastic, nonpressure-piping, solvent-cement joints, adhering to ASTM F402, ASTM D2235, ASTM D2661, ASTM D2855, and ASTM D2665 standards.

• Installation of Hangers and Supports: Requires compliance with Section 220529, specifying types of hangers for horizontal and vertical piping, spacing, and support near fittings, valves, and couplings.

• Connections: Details connecting waste and vent piping to equipment and allowing space for service and maintenance.

• Identification: Requires identification of exposed sanitary waste and vent piping per Section 220553.

• Field Quality Control: Mandates notification to authorities having jurisdiction for inspections (roughing-in and final) and reinspections if tests fail.

• Cleaning and Protection: Requires cleaning of piping interiors, protection from damage and clogging, plugging of open ends, and repair of adjacent material damage.

• Piping Schedule: Specifies aboveground soil and waste piping NPS 4 (DN 100) and smaller to use solid-wall PVC pipe with solvent-cemented joints and unshielded, nonpressure transition couplings for dissimilar pipe materials.

• Minimum working pressure of 10 ft. head of water for soil, waste, and vent piping.

• Minimum slopes for horizontal sanitary waste piping: Two percent downward.

• Compliance with specified ASTM and MSS standards.

• Inspection and approval by authorities having jurisdiction.

Not explicitly stated in this document.

• Compliance with referenced sections (e.g., 220500, 220529, 220553).
• Use of specific ASTM and MSS standards for materials and installation.
• Coordination with "Piping Schedule" Article.
• Approval by authorities having jurisdiction for installation and testing.

Forms / Attachments / Pricing Sheets

This document contains the "Cover Sheet" (G-01) and "Plumbing & Electrical Plans" (PE-01) for the IERC CCD Space Humidification Project No. 2-6-8. It provides the overall project identification, a vicinity plan of the Fermilab site, a list of drawings, and detailed plumbing and electrical floor plans.

• Cover Sheet (G-01): Identifies the project, provides a vicinity map of the Fermilab site with access information, and lists the drawings included in the set.
• Plumbing & Electrical Plans (PE-01): Includes ground floor plumbing and electrical plans detailing the layout for humidifiers, condensate pumps, and associated piping and wiring. It also contains a "Humidifier Schedule" and "Electrical Sheet Notes" outlining specific requirements for materials, installation, safety, and labeling.

These plans are critical for bidders to understand the physical layout, scope of work, and technical specifications for the humidification system installation. They detail the required plumbing connections, electrical circuits, equipment locations, and compliance requirements, which are essential for accurate bidding and project execution.

Statement of Work (SOW) / Performance Work Statement (PWS)

To provide and install two humidification units within the Integrated Engineering and Research Center (IERC) CCD lab at Fermilab. This is to ensure tight humidification control necessary to prevent damage to sensitive components manufactured on-site.

• Installation of two humidification units, including all required plumbing and electrical connections and support.

• Furnish all necessary supervision, labor, materials, tools, plant, and appurtenances.

• Work must adhere to the drawing set "2-6-8 IERC CCD Space Humidification Project" and specified sections of the technical specifications (GENERAL REQUIREMENTS, ENVIRONMENT, SAFETY, AND HEALTH REQUIREMENTS, SUBMITTALS, and QUALITY REQUIREMENTS).

• Pre-Construction Meeting: Confirm understanding of project scope.

• Product Submittals & Shop Drawings: Provide product submittals and shop drawings to the project Design Coordinator.

• Closeout Documentation: Provide closeout documentation upon completion of construction.

• Notice to Proceed (NTP): Project start.

• Product Submittals & Shop Drawings Review: Within 21 calendar days of NTP.

• Construction Complete (with punch-list items remaining): Within 66 calendar days of NTP.

• Punch-list Items Complete: Within 86 calendar days of NTP.

• Project Complete (including closeout documentation, final invoices, and retainage paid): Within 96 calendar days of NTP.

• Includes transportation, overhead, bonding, safety oversight, quality control oversight, and supervision.

• Adherence to specified general requirements, environmental, safety, and health requirements, submittal procedures, and quality requirements.

Form / Attachment / Pricing Sheet

This document is a Price Proposal Form associated with Request for Proposal (RFP) No. 372698 for Construction Services for IIERC CCD Space Humidification. It is used by offerors to submit their total proposed price for the project.

• Fields for the total dollar amount of the proposal.
• A field for the written amount of the proposal.
• Signature block for the company representative, including Company Name, Signature, Name & Title of Individual, and Date.

Bidders must complete and submit this form as part of their proposal. It requires the offeror to state their total price for the project and confirm the acceptance period of their proposal, which must be at least ninety (90) days from the opening date unless a longer period is specified.

Form / Attachment / Pricing Sheet

This document is a site map of the Fermilab National Accelerator Laboratory. It provides a visual overview of the facility's layout, including roads, buildings, parking lots, ponds, trails, and streams.

• Labeled locations of key facilities such as the Wilson Hall, Linac Accelerator Research Center, Feynman Computing Center, and the Main Injector Particle Accelerator.
• Identification of various roads (e.g., Batavia Road, Discovery Road, Eola Road, Wilson Street).
• Indication of public access points and trails.
• Legend detailing different types of features (Public Access Areas, Buildings, Parking Lots, Ponds, Bicycle Path, Trails, Streams).

This site map can help bidders understand the physical layout and accessibility of the Fermilab site, which may be relevant for understanding site visits, logistical planning for services, or assessing the environment for potential contract performance.

Solicitation / RFP / RFQ

This Request for Proposal (RFP) solicits proposals for construction services for the IERC CCD Space Humidification project. The government is procuring firm-fixed-price subcontract services.

• The subcontractor shall furnish all required supervision, labor, materials, tools, plant, and appurtenances to perform the work as described in the drawings and technical specifications.

• Work includes transportation, overhead, bonding costs, safety oversight, quality control oversight, and supervision.

• Key milestones include: NTP (0 days), material submittals (21 days), completion of punch-list items and cooling water piping installation/testing (66 days), and project completion (96 days).

• Specific technical requirements include:

  • NFPA 70E compliance and experience with electrical installation of similar voltages.
  • At least ten (10) years of experience with similar projects.
  • Subcontractor for plumbing equipment must have five (5) or more years of experience installing humidification equipment.
  • Subcontractor for electrical conduit must have five (5) or more years of experience with similar voltages.

• Offerors must provide at least three (3) project experiences completed within the past five (5) years that are similar in type, size, scope, and complexity.

• Key Personnel requirements include specific experience and OSHA training for Project Manager, Project Superintendent, and Safety Coordinator.

• Contract type: Firm-fixed-price subcontract.

• Period of performance: Defined by project milestones, with completion within 96 days of Notice to Proceed (NTP).

• Estimated value: Not explicitly stated, but a small business set-aside with a size standard of $19.0 Million for NAICS code 238220.

• Proposals are due by 5:00 PM CT on Wednesday, January 7, 2026.

• Proposals must be submitted in two parts: Part I - Technical Proposal and Part II - Business/Management Proposal.

• This is a competitive Lowest Price Technically Acceptable (LPTA) procurement.

• Evaluation criteria include technical acceptability and lowest evaluated price.

• Key submission items include:

  • Price Proposal Form
  • Bid Guarantee (20% of proposal price, not to exceed $3 million)
  • Subcontractor Annual Representations & Certifications (SARC)
  • Proposal Certifications (Form PUR-466)
  • Safety and Quality Documents (e.g., CESHC, NCCI rating, OSHA 300 A logs, Safety & Health Plan, Quality Assurance Plan, Certificate of Insurance).

• A minimum acceptance period of ninety (90) calendar days is required.

• This solicitation is a small business set-aside.

• NAICS Code: 238220, Plumbing, Heating, and Air Conditioning Contractors.

• Small business size standard: $19.0 Million.

• A Pre-Proposal Meeting and Site Visit is scheduled for Thursday, December 18, 2025, at 11:00 am CT.

• Questions regarding the RFP must be submitted in writing by 3:00 PM CT, Monday, December 22, 2025.

• Offerors must acknowledge receipt of any amendments.

• Davis-Bacon Act wage rates and certified payroll are applicable.

• Illinois Occupation and Use Taxes are exempt.

• Buy American requirements apply to construction materials.

• Payment Bond and Performance Bond are required for subcontracts exceeding certain thresholds.

• Insurance requirements are detailed.

• Numerous exhibits are referenced, including Scope of Work, drawings, specifications, and various forms.

Form / Attachment / Pricing Sheet

This document is a sample firm-fixed-price subcontract template. It outlines the terms and conditions for a subcontract between Fermi Forward Discovery Group, LLC and a "Subcontractor" for a specific "Project" related to the management and operation of the Fermi National Accelerator Laboratory under Prime Contract No. 89243024CSC000002 with the Department of Energy.

• Introduction: Identifies the parties, the nature of the subcontract (firm-fixed-price), and the overarching prime contract.
• Agreement: States that the attached Schedule of Articles and referenced documents constitute the entire agreement.
• Article 1 - Scope of Work: Defines the Subcontractor's responsibility to furnish labor, materials, transportation, overhead, insurance, bonding, safety oversight, quality control, supervision, and equipment. It also specifies the work location as the Fermi National Accelerator Laboratory in Batavia, Illinois, and outlines acceptance criteria based on performance and compliance.
• Article 2 - Period of Performance: To be completed within a specified number of calendar days upon receipt of Notice-to-Proceed.
• Article 3 - Price and Limitations: Establishes a "no-to-exceed" fixed price and limits FermiForward's liability to this amount plus any approved change orders.
• Article 4 - Invoices and Payment: Details the process for monthly progress payments, including required invoice information, submission procedures (email to apinvoices@fnal.gov or mail), and payment terms (within 30 days of receipt, with exceptions for late payments). It also specifies retainage policies (10% initially, reducing to 5% after 50% completion) and requirements for a final invoice within 60 days of completion.
• Article 5 - Subcontract Administration: Outlines procedures for notices, requests, and modifications, requiring submission to the FermiForward Procurement Representative. It also designates a Technical Representative for monitoring work and clarifying technical requirements, and details closeout procedures.
• Article 6 - Reports or Deliverables: Requires the Subcontractor to submit Monthly Progress Reports detailing work performed and planned, and specifies submission recipients.
• Article 8 - Incorporated Documents: Notes that other documents are incorporated by reference, including FAR and DEAR clauses.

This document serves as a template for potential subcontractors. It provides crucial information regarding the structure of a subcontract, scope of work expectations, payment terms, invoicing procedures, reporting requirements, and administrative processes. Bidders can use this to understand the contractual framework and operational expectations if they are to be awarded a subcontract under this prime contract.