Forest Service - M6 Road Slide Repair

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the fire prevention and suppression activities and establishes a suppression plan for fires within the contract area for the Mendocino National Forest M6- Road Repair project.

• Defines the contractor's responsibilities for fire prevention and suppression.

• Establishes conditions under which contract activities will be curtailed or shut down.

• Specifies requirements for fire tools, equipment, and safety measures.

• Contractor must prevent fires not required for contract completion and extinguish any that escape.

• Contractor must permit and assist in periodic testing and inspection of fire equipment.

• Contractor must certify compliance with fire precautionary measures.

• Forest Service will conduct inspections for compliance, but this does not relieve the contractor of responsibility.

• The Fire Precautionary Period is set by the State of California, typically April 1 through December 1 annually.

• The contract area is delineated by map within the contract.

• Tools and Equipment: Specific requirements for fire tools (shovels, axes), fire extinguishers (various ratings based on equipment), spark arresters, mufflers, and power saws.

• Tank Truck or Trailer: Must carry at least 300 gallons of water, with a pump capable of delivering 23 GPM at 175 PSI, and equipped with 1-1/2 inch hose and a shut-off nozzle.

• Communications: Contractor must furnish a serviceable communication system connecting operating sides with their headquarters.

• Clearing of Fuels: Contractor shall clear away fuels and logging debris within a 10 feet slope radius around welding equipment and stationary log loaders, yarders, etc.

• Emergency Precautions: Operations must conform to limitations and requirements in the Project Activity Level (PAL) table, which dictates restrictions based on fire danger.

• Reporting Fires: Contractor must notify the Forest Service of any fires within 15 minutes of discovery, providing specific details.

• Definitions: Includes definitions for Active Landing, Hot Saw, and Mechanical Operations.

Statement of Work (SOW) / Performance Work Statement (PWS)

This Statement of Work outlines the requirements for repairing roadway FSR M6 on the Mendocino National Forest, California.

• Excavate existing failed road template and up-hill slumps.

• Prepare a structure base for the relocated roadway.

• Construct new structural base and backfill to sub-base level.

• Replace augmented road base and surface course.

• Place riprap slope retention.

• Clear and remove trees and brush.

• Prepare and construct new reinforced fills.

• Place a geo-composite drainage system.

• Place and compact a three-inch course of aggregate surface.

• Implement traffic control for public access and administrative travel.

• The project is located on the Upper Lake Ranger District of the Mendocino National Forest, California, specifically along FSR M6.

• Survey Location: T19N, R9W, Sec. 15, NW.

• GPS location: 39.5047°, -122.8644°.

• The Contractor shall complete all work, including final site clean-up, within 180 calendar days from the Notice to Proceed.

• Contractor must furnish all necessary equipment and personnel.

• Contractor is responsible for securing highway permits for material and equipment transport.

• Contractor must provide all necessary power, potable water, and sanitation facilities.

• Camping is restricted and requires permission.

• Limited non-potable water may be drafted from the Eel River or Pillsbury Pines boat ramp.

• Contractor is responsible for security of equipment and materials.

• Contractor must obtain a burning permit if onsite burning is required.

• All equipment must be cleaned to be free of noxious weeds prior to delivery to the site.

• Contractor must comply with Standard Specifications for Construction of Roads and Bridges on Federal Highway Projects (FP-14 U.S. Customary Units) and Supplemental Project Specifications.

• Required submittals include Bid Bond, Performance Bond, Payment Bond, Materials Approval, Site Safety Plan, Proposed Project Schedule, and Weekly Progress Reports.

• Contractor must possess all necessary licenses required by the State of California.

• A Contractor's representative or work site superintendent with relevant experience must be present at all times.

Other / Unclassified

This document is a General Decision Number (GDN) for wage determination, specifically CA20260004, effective January 2, 2026. It supersedes CA20250004. The decision outlines prevailing wage rates and fringes for various construction trades in Del Norte, Humboldt, Lake, and Mendocino Counties, California. It covers construction types such as Heavy (Heavy and Dredging) and Highway projects.

This document is crucial for bidders as it specifies the minimum wage rates and fringe benefits that must be paid to laborers and mechanics employed on covered construction projects. Understanding these rates is essential for accurate cost estimation and ensuring compliance with labor standards, which can significantly impact bid competitiveness and project profitability.

Solicitation / RFP / RFQ

This document is a combined synopsis/solicitation (RFQ) for M6 Road Slide Repairs at the Mendocino National Forest, California. The acquisition is a Total Small Business Set-Aside. The estimated project magnitude is between $250,000 and $500,000.

• Excavation of the current deteriorated road template and uphill slumps.

• Preparation of a structural foundation for the repositioned roadway.

• Construction of a new structural base with backfilling.

• Replacement of the enhanced road base and surface course.

• Installation of a geo-composite drainage system.

• Placement of riprap for slope retention.

• Contract Type: Firm Fixed Price

• Period of Performance: Commence work within 10 calendar days after Notice to Proceed (NTP), with entire work ready for use not later than 180 calendar days after NTP. This includes final cleanup.

• Site Visit: Scheduled for February 19, 2026.

• Requests for Information (RFI): Due no later than February 20, 2026, at 10:00 AM Pacific Time.

• Quote Due Date: Emailed no later than March 2, 2026, at 11:00 AM Pacific Time.

• Evaluation: Quotes will be evaluated based on Technical Approach and Past Performance, with award made to the offeror representing the best value to the Government. Price will be evaluated to determine if it is fair and reasonable. Award will not necessarily be made to the lowest-priced offeror.

• Total Small Business Set-Aside.

• Offerors must have an active entity registration at SAM.gov.

• The solicitation includes numerous FAR and AGAR clauses and provisions that bidders must comply with.

• Attachments include Statement of Work, Schedule of Items, Drawings, Map, Special Project Specifications, Fire Plan, Wage Determination, and Contract Administration Data.

Form / Attachment / Pricing Sheet

This document, "3. Schedule Of Items.docx", provides a detailed schedule of items required for the opportunity. Bidders must use this schedule to provide their pricing.

• Item Numbers and Descriptions: Lists specific tasks and materials, such as Mobilization, Construction Survey and Staking, Soil Erosion and Pollution Control, Clearing and Grubbing, Roadway excavation and embankment, Placed riprap, Aggregate Surface, Geocomposite Drain System, Temporary Erosion Control, and Temporary Traffic Control.
• Units and Quantities: Specifies the unit of measure (e.g., LS, CY, TON, SY) and the estimated quantity for each item.
• Pricing Fields: Includes columns for Unit Price and Cost, which bidders are required to complete.
• Schedule Notes:
  • Quantities are estimates; contractors must field verify to meet all requirements.
  • One award will be made; contractors must price all items.
  • A Bid Bond/Guarantee is REQUIRED for proposals exceeding $150,000.00 per FAR 52.228-1.
  • Payment for bond premiums is included in the contract price, not in addition.
• Bidder Information: A section for the company to complete with their Name, Address, UEI Number, POC details, Phone, Email, and Tax ID.

This document is critical for bidders to understand the scope of work in terms of specific line items and quantities. It directly informs the pricing strategy and proposal submission. Bidders must complete the pricing for all listed items and provide their company information as requested. The requirement for a bid bond for proposals over $150,000 is a key financial consideration.

Forms / Attachments / Pricing Sheets

This document contains the detailed engineering drawings and plans for the M6 Road Repair S15 project. It provides the visual specifications and layouts necessary for understanding the scope and execution of the repair work.

• Index of Sheets: Lists all included drawings (Title, Location Map, Schedule of Items, Plans, Profiles, Sections, Details, Typicals).
• Location Map (G-1): Shows the project area, travel directions, and project site location within the Mendocino National Forest.
• Schedule of Items (G-2): Details the specific work items, quantities, and units for the project, including mobilization, excavation, riprap, aggregate surface, and erosion control.
• Plans (D-1): Illustrates the overall layout of the project site, excavation areas, and proposed structures.
• Profiles (D-2): Shows the centerline profile of the road, indicating existing and proposed elevations.
• Sections (D-3 to D-6): Provides cross-sectional views of the road at various stations, detailing excavation, fill, drainage, and slope treatments.
• Details (D-7): Offers specific construction details for components like the geocomposite drain wall, base mat, and drain outlets.
• Typicals (D-8): Shows a typical outsloped road section with aggregate surfacing.

These drawings are critical for bidders to accurately assess the scope of work, understand the technical requirements, estimate material and labor needs, and develop a comprehensive proposal for the M6 Road Repair S15 project. They define the physical characteristics and construction methods required for the road repair.

Form / Attachment / Pricing Sheet

This document is a map and notes related to the "M6 ROAD REPAIR S15" project within the Mendocino National Forest, Upper Lake Ranger District. It provides crucial location and logistical information for potential bidders.

• Project Location Notes: Details regarding county and FS roads, navigation aids, detour routes, traffic control responsibilities, non-potable water sources, and road damage repair obligations.
• Sign Legend: Illustrates various traffic control signs to be used, including detour and road closure signs.
• Map: Depicts the project area, including the work site, detour route, primary roads, and nearby landmarks like Lake Pillsbury and Soda Creek.
• Project Information: Identifies the project name (M6 Road Repair S15), the responsible forest and ranger district, and drawing details.

This map is essential for understanding the geographical context of the M6 Road Repair S15 project. Bidders should review the notes for specific requirements related to traffic control, water sources, road access, and potential damage repair responsibilities. The map visually clarifies the work site location and the proposed detour route, aiding in the assessment of logistical challenges and resource planning.

Amendment / Modification

This document details numerous modifications to the original "Special; Project Specifications" for Mendocino National Forest M6 Road Repair S15. Key changes include:

• Definitions and Terms: Deletion of references to TAR (Transportation Acquisition Regulations) and addition of new definitions for "Adjustment in Contract Price," "Change," "Forest Service," "Neat Line," "Pioneer Road," "Purchaser," and "Protected Streamcourse." A figure illustrating road structure terms has been added.
• Contract Sections: Deletion of entire Sections 102, 108, and 155. Significant deletions and replacements within Sections 101, 103, 104, 105, 106, 107, 109, 152, 153, 157, 201, 203, 204, 207, 213, 301, 703, and 705.
• Measurement and Payment: Updates to Subsection 109.01 regarding the decimal accuracy of quantities for final payment, including a revised Table 109-1.
• Construction Survey and Staking: Modifications to Subsection 152.05 regarding slope and reference stakes, and clearing and grubbing limits. Table 152-1 (Construction Survey and Staking Tolerances) has been replaced and expanded.
• Clearing and Grubbing: Revisions to clearing requirements and utilization standards for merchantable timber.
• Excavation and Embankment: Section 204 has been entirely replaced, detailing new descriptions, definitions, construction requirements, compaction methods, drainage features, and measurement/payment criteria. Tables 204-1 and 204-2 have been updated.
• Aggregate Specifications: Deletions and replacements for Tables 703-2 and 703-3, and the addition of Table 703-13 for screened aggregate. Updates to Section 703.05 regarding subbase, base, surface course, and screened aggregate.
• Riprap: Addition of a new class to Table 705-1 for Riprap.

Almost all sections of the original specifications have been affected by these modifications, including definitions, contract administration, scope of work, control of work and materials, acceptance, prosecution and progress, measurement and payment, survey and staking, quality control, erosion control, clearing and grubbing, removal of structures, excavation and embankment, earthwork geotextiles, subgrade stabilization, aggregate courses, aggregate specifications, and rock (riprap).

Bidders must review these extensive changes carefully as they significantly alter the project's technical requirements, specifications, measurement, and payment terms. All proposals must be based on the revised specifications. Key areas of impact include detailed requirements for excavation, embankment construction, compaction methods, aggregate properties, and survey/staking tolerances.

Form / Attachment / Pricing Sheet

This document, titled "CONTRACT ADMINISTRATION DATA," outlines critical administrative requirements and procedures for contractors operating under a USDA solicitation. It details how invoices are to be submitted, contract award and change processes, and specific requirements related to personnel, site management, and safety.

• Invoices & Payments: All invoices must be submitted electronically via the U.S. Department of Treasury's Invoice Processing Platform (IPP). An itemized invoice must include contractor details, contract/PO numbers, invoice number, description of services, and date of service.
• Contract Administration: Details the process for contract award, notice to proceed, and the sole authority of the Contracting Officer for contract changes. It also addresses unauthorized instructions and the designation of Contracting Officer's Representatives (COR).
• Special Requirements: Includes a mandatory post-award conference (virtual), requirements for key personnel (Project Manager, Superintendent, Quality Control, Safety Manager, etc.), and contractor responsibility for utility services (water, electricity, restrooms).
• Site Management & Safety: Covers contractor responsibility for loss/damage of equipment, handling of archaeological/historic sites, spill prevention and countermeasures (SPCC Plan), site security, adverse weather protocols, storage of materials, and traffic control (barricades, signs).
• Prohibitions & Compliance: Prohibits the use of lead-based paint and outlines requirements for erosion, sedimentation, and pollution control. It also details procedures for submitting samples and certificates.
• Liability: Defines contractor responsibility for fire suppression and potential liability for damages caused by fires.

This document is crucial for bidders as it defines the operational and administrative framework of the contract. Understanding these requirements is essential for accurate proposal development, cost estimation, and successful contract performance. Key areas include invoicing procedures, personnel assignments, site responsibilities, and compliance with safety and environmental regulations, all of which can impact project execution and cost.