Forest Service - Thomas Fire Disaster Road Repairs

Amendment / Modification

• Reschedules the organized site visit due to inclement weather.

• Extends the deadline for submitting Requests for Information (RFIs).

• The organized site visit date has been changed.

• The RFI submission deadline has been extended.

• The site visit is now scheduled for February 25, 2026.

• RFIs are now due no later than February 26, 2026, at 11:00 AM Pacific Time.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the responsibilities and requirements for fire prevention and suppression activities related to construction and service contracts. It establishes a fire plan and specifies conditions under which contract activities may be curtailed or shut down.

• Contractor Responsibilities:
  • Abide by the Fire Plan requirements.
  • Prevent employees and subcontractors from setting unauthorized fires.
  • Be responsible for fires escaping due to contract operations and extinguish them.
  • Permit and assist in fire equipment testing and inspection.
  • Certify compliance with fire precautionary measures before the Fire Precautionary Period and update as operations change.
  • Designate a qualified fire supervisor on-site during operating hours.
• Forest Service Responsibilities:
  • Conduct periodic inspections for compliance with the Fire Plan.
  • Inspections do not relieve the Contractor of responsibility for violations or general fire safety.

Key terms are defined, including 'Active Landing,' 'Hot Saw,' and 'Mechanical Operations.'

• Fire Precautionary Period: April 1 through December 1 annually (State of California).
• Fire Tools: Minimum requirements as per California Public Resources Code Section 4428.
• Equipment: Specific requirements for shovels, axes, fire extinguishers (various types based on equipment), spark arresters, mufflers, and power saws.
• Water Supply: Requirements for tank trucks or trailers, including pump capacity, hose specifications, and nozzle performance.
• Compressed Air Foam System (CAFS): Specifications and requirements if used as a substitute for other fire suppression equipment.

Not explicitly defined as a single period but governed by the annual Fire Precautionary Period (April 1 - December 1) and specific contract areas.

• State Law Compliance: Adherence to all applicable California Public Resources Codes.
• Permits: Special written permits may be required for burning, welding, cutting metal, or warming fires.
• Blasting: Use of electric caps only, with a fire patrolperson required in the immediate area.
• Smoking: Restrictions during fire season, with designated areas only.
• Storage and Parking Areas: Clearing of flammable material around equipment, gas, and oil storage areas.
• Reporting Fires: Immediate notification to Forest Service (within 15 minutes of discovery).
• Communications: Contractor must provide a serviceable communication system.
• Fire Patrolperson: Required during specific Project Activity Levels (C or higher).
• Clearing of Fuels: Specific clearing distances around equipment and blocks.
• Emergency Precautions: Compliance with Project Activity Level (PAL) table, which dictates minimum requirements and restrictions based on fire danger. Contractors must obtain the predicted PAL daily.

Form / Attachment / Pricing Sheet

This document, titled "CONTRACT ADMINISTRATION DATA," outlines critical administrative requirements and procedures for contractors operating under a USDA contract. It details how invoices should be submitted, the process for contract changes, and various special requirements and responsibilities.

• Invoices & Payments: All invoices must be submitted electronically via the Department of Treasury's Invoice Processing Platform (IPP). Contractors must register and have an account prior to commencing work. Itemized invoices require specific details including contractor name/address, contract/PO numbers, invoice number, description of services, and date of service completion.
• Contract Award & Changes: A written award or acceptance creates a binding contract. Work commences upon receipt of a "Notice to Proceed." Only the Contracting Officer (CO) can approve changes; unauthorized changes will not be compensated.
• Key Personnel: Contractors must designate a Project Manager, Project Superintendent, Quality Control Manager, Project Safety Manager, After-Hours Emergency Contact, and Signature Authority for Contract Modifications.
• Special Requirements: Includes details on post-award conferences (virtual), utility responsibilities (water, electricity, restrooms), telephone access considerations, and liability for loss, damage, or destruction of equipment.
• Site-Specific Requirements: Covers archaeological/historic sites, spill prevention (SPCC Plan if applicable), site security, adverse weather protocols, storage of materials, and the use of barricades/warning signs.
• Prohibitions & Controls: Prohibits lead-based paint (over 0.06% lead by weight) and outlines requirements for erosion, sedimentation, and pollution control. Mechanized equipment is restricted in flowing streams without CO approval.
• Samples & Certificates: Requirements for submitting samples, certificates, and test data for approval before use.
• Emergency Response: Contractor is responsible for fires started by their operations and associated costs/damages.

This document is crucial for understanding the administrative framework and operational expectations once a contract is awarded. Bidders should pay close attention to invoicing procedures, change management, required personnel, site responsibilities, and compliance requirements (e.g., spill plans, lead paint, environmental controls) as these will directly impact contract performance and cost management.

Wage Determination

This document is a Wage Determination issued under the Service Contract Act, specifically Wage Determination No. 2015-5647, Revision No. 26, with the last revision date of 12/03/2025. It applies to the State of California, Area: California County of Santa Barbara.

This document lists various occupational codes and their corresponding minimum hourly wage rates and required fringe benefits. Bidders on contracts covered by this wage determination must ensure their proposed wages and benefits meet or exceed these minimums for the listed occupations.

The document provides a comprehensive list of occupations, including:

• Administrative Support and Clerical Occupations: Ranging from Accounting Clerk I ($21.56) to Administrative Assistant ($39.53).
• Automotive Service Occupations: Including Motor Vehicle Mechanic ($30.80) and Radiator Repair Specialist ($28.36).
• Health Occupations: Such as Nursing Assistant I ($16.12) to Nuclear Medicine Technologist ($72.66).
• Information Technology Occupations: From Computer Operator I ($25.20) to Computer Systems Analyst III (rate not specified, requires conformance).
• Mechanics and Maintenance and Repair Occupations: Including Aircraft Mechanic I ($38.64) to Welder, Combination, Maintenance ($27.32).
• Miscellaneous Occupations: Such as Cabin Safety Specialist ($20.14) to Vending Machine Repairer Helper ($24.71).

All listed occupations receive the following benefits:

• Health & Welfare: $5.55 per hour (up to 40 hours/week) or $222.00 per week.

• Health & Welfare (EO 13706): $5.09 per hour (up to 40 hours/week) or $203.60 per week, applicable when compensating employees on an SCA-covered contract also covered by EO 13706.

• Vacation: Accrues based on years of service (2 weeks after 1 year, 3 weeks after 5 years, 4 weeks after 15 years).

• Holidays: A minimum of twelve paid holidays per year.

• Computer Employees: The wage determination may not apply to exempt computer professionals; conformance may be necessary.

• Night Pay & Sunday Pay: Differentials apply for Air Traffic Controllers and Weather Observers.

• Hazardous Pay Differential: An 8% differential for high hazard work and a 4% differential for low hazard work involving ordnance or explosives.

• Uniform Allowance: Contractors must furnish or reimburse employees for uniform costs if required.

• Conformance Process: Procedures are outlined for classifying and determining wage rates for occupations not listed in this determination.

This document is critical for bidders to accurately price their proposals, ensuring compliance with federal labor laws regarding minimum wages and benefits for service contract employees in the specified geographic area.

Solicitation / RFP / RFQ

This is a combined synopsis/solicitation for commercial items (RFQ) for the Thomas Fire Disaster Road Repairs 2025 project at Los Padres National Forest, California. The acquisition is a Total Small Business Set-Aside.

• Road and drainage maintenance within Santa Barbara and Ojai Ranger Districts of the Los Padres National Forest.

• Includes 32.22 miles of road blading, restoration of existing drainage dips, installation of 97 new overside drains, and new rolling dips.

• Roadside vegetation cutting on three roads.

• Contractor to provide necessary equipment, labor, and services.

• Detailed requirements are in Attachment 2 (Statement of Work).

• Anticipated Award Type: Firm Fixed Price.

• Period of Performance: Commence work within 10 calendar days after Notice to Proceed (NTP), with entire work ready for use no later than 120 calendar days after NTP. This includes final cleanup.

• Quote Due Date: March 5, 2026, at 11:00 AM Pacific Time. Quotes to be emailed to the Contracting Officer.

• Evaluation Criteria: Quotes will be evaluated based on FAR 12.203. Award will be made to the offeror representing the best value to the Government, considering Technical Approach, Past Performance, and Price.

• Technical Approach: Must include a Work Plan/Capability (max 5 pages), Key Personnel (max 3 pages), Performance Schedule (max 2 pages), Site-Specific Safety Plan, Quality Control Plan, and Material confirmation.

• Past Performance: Requires a list of three similar projects completed within the last three years.

• Price: Must be fair and reasonable, evaluated in accordance with FAR 12.204.

• Offerors must have an active entity registration at SAM.gov.

• Total Small Business Set-Aside.

• NAICS Code: 237310 – Highway, Street, and Bridge Construction.

• Small Business Size Standard: $45M.

• An organized site visit is scheduled for February 19, 2026. Registration is required via email.

• Requests for Information (RFIs) are due by February 25, 2026, at 11:00 AM Pacific Time.

• Service Contract Labor Standards apply; Wage Determinations are attached for Santa Barbara and Ventura County.

Statement of Work (SOW)

To provide road and drainage maintenance for five roads on the Santa Barbara and Ojai Ranger Districts of the Los Padres National Forest, including road blading, restoring existing drainage dips, installing new overside drains and rolling dips, and cutting roadside vegetation.

• Maintenance of 32.22 miles of road.

• Restoration of existing drainage dips.

• Installation of 97 new overside drains (two style options provided: corrugated metal pipe or sheet metal alternate).

• Installation of new rolling dips.

• Cutting roadside vegetation on three roads.

• Work locations will be directed by the Forest Service.

• Projected start date: Spring 2026.

• Time for completion: 120 calendar days from the issuance of the "Notice to Proceed".

• Contractor must minimize mechanical activity during rainy periods to prevent soil disturbance and erosion.

• Contractor is responsible for repairing any damage caused by their operations.

• Technical submittals for materials require Forest Service review and approval.

• Disposal of all project-related trash and debris off Forest lands is required before final payment.

• Contractor must obtain fire predicted Project Activity Level (PAL) daily and adhere to Fire Plan restrictions.

• Contractor is responsible for traffic control and equipment staging.

• Equipment must be clean to prevent the introduction of invasive weeds.

• Heritage resource areas require monitoring, and work must cease if new resources are discovered.

• A qualified superintendent must be on-site throughout the project.

• Contractor is responsible for obtaining all required permits and complying with regulations.

• Operations and storage areas must be confined to designated zones.

• A comprehensive accident prevention program must be implemented.

• New, high-quality materials and skilled workmanship are required, with substitutions needing prior approval.

• Includes various Forest Service specifications (e.g., Blading, Drainage Dips, Mobilization).

• Includes maps for planning purposes (EC & RC Full Plan Maps, NRR &CP Full Plan Maps).

• Performance and Payment Bonds (if required).

• Materials Approval, Slips, Testing.

• Site Safety Plan.

• Proposed Project schedule / Plan / Project Updates Weekly (including responsibilities, timeline, risks, milestones, progress reports, and schedule updates).

Form / Attachment / Pricing Sheet

This document is a Schedule of Items, serving as a pricing sheet for the "Thomas Fire Disaster Road Repairs 2025" opportunity. Bidders are required to submit pricing for all listed items.

• Items: Includes various road repair and maintenance tasks such as Mobilization, Road Blading (Grader/Bulldozer), Restore Drainage Function, Corrugated Metal Spillways, Drainage Structure Maintenance, Remove and End Haul, and Maintenance of Unpaved Shoulders.
• Quantities: Estimated quantities are provided in various units (Each, Miles, Lump).
• Pricing: Bidders must provide Unit Price and Total Price for each item.
• Option #1: Includes Mobilization and Cutting Roadside Vegetation.
• Schedule Notes: Quantities are estimates; contractors must field verify to satisfy all requirements. Payment is based on actual work performed.
• Bidder Information: Contractors must complete and include Company Name, Address, UEI Number, POC Name/Title, Phone, Email, and Tax ID with their proposal.

This document is critical for bidders to understand the scope of work and to prepare their pricing proposals. It outlines the specific tasks and estimated quantities for which the government will pay. Bidders must carefully review the items, verify quantities in the field, and submit accurate pricing for both the base bid and Option #1. The requirement to include company and contact information is also a key submission detail.

Form / Attachment / Pricing Sheet

This document is a vicinity map for the project, illustrating the geographic area and specific roads relevant to the opportunity. It serves as a visual aid for bidders to understand the project's location and scope.

• Map Area: Covers parts of Santa Barbara and Ventura counties, including the Los Padres National Forest, specifically the Santa Barbara and Ojai Ranger Districts.
• Roads Highlighted: Displays various roads, categorized by contract name and length, including:
  • CHIEF PEAK (2.89 Miles)
  • EAST CAMINO (1.54 Miles)
  • NORDHOFF RD (17.58 Miles)
  • REMOTE RADIO (0.42 Miles)
  • ROMERO
  • CAMUESA (9.79 Miles)
• Legend: Provides a key to understand the different road designations and their lengths.
• Scale: Includes a mileage scale for spatial reference.

This map is crucial for bidders to visualize the project's location, understand the terrain, and identify the specific roads that are part of the contract. It helps in assessing logistical challenges, planning site visits, and understanding the scope of work related to these roads.

Form / Attachment / Pricing Sheet

This document lists "Chief Peak Points," "Nordoff Ridge Points," and "Romero Camuesa/Pendola Points" with associated road numbers, notes, features, sizes, needs, and geographic coordinates (longitude and latitude).

• Chief Peak Points: Details specific locations on road 5N42.2, including grading and armoring needs, and the status of existing OSD/DIPs.
• Nordoff Ridge Points: Lists numerous points along road 5N08, primarily indicating the need for "NEW OSD/DIP" and providing coordinates. Some entries note specific features like "Crossing drainage 24" needed" or "Berm road edge."
• Romero Camuesa/Pendola Points: Details points along road 5N15.1, specifying actions such as "NEW OSD/DIP," "INSLOPE/BERM," "CMP/BASIN CLEANING," and "GRADE LWC." It also includes notes on specific issues like "road edge failure" and "erosion ditch crossing."

This document provides critical location-specific data and requirements for potential work related to drainage, road maintenance, and infrastructure improvements. Bidders can use this information to understand the scope of work, identify specific areas needing attention, and estimate resources required for tasks such as grading, armoring, OSD/DIP installation or repair, and basin cleaning at the listed coordinates.

Forms / Attachments / Pricing Sheets

This document contains detailed specifications for various road maintenance and construction tasks, including:

• Section 805: Mobilization / Equipment Moving
• Section 811: Blading
• Section 834: Drainage Structure Maintenance
• Section 839: Restore Drainage
• Section 840: Corrugated Metal Spillways and Flume
• Section 842: Cutting Roadway Vegetation

Each section outlines:

• Description: The scope of work.
• Requirement/Maintenance Requirements: Specific tasks, standards, and procedures.
• Location of Work: Where the work is to be performed.
• Measurement: How the work will be quantified for payment.
• Payment: Details on pay items and units.

Additionally, detailed construction drawings are provided for:

• Typical Rolling Dip (Drawing 837-1)
• Overside Drain Fabrication and Installation (Drawings 840-2, 840-2a)

This document is crucial for bidders to understand the technical requirements, scope of work, measurement methods, and payment structures for various road maintenance and construction activities. It provides the detailed specifications necessary for preparing accurate proposals and understanding the performance expectations for these tasks.

Form / Attachment / Pricing Sheet

This document contains maps detailing various roads within the Los Padres National Forest, specifically focusing on the East Camino & Romero Camuesa Roads, Nordoff Road (Maps 1-7), and Chief Peak Road. These maps are likely intended to provide geographical context for a contract or project related to road maintenance, construction, or access within these areas.

• Road Identification: Maps clearly label and segment specific roads with numerical markers (e.g., Nordoff Road segments 1-15, Chief Peak Road segments 1-14).
• Geographic Context: Topographical lines, elevation markers, and named features (e.g., Wheeler Gorge, Chief Peak, Nordhoff Ridge) are provided.
• Road Names & Lengths: A legend on the first map lists contract roads and their lengths (e.g., NORDHOFF RD - 17.58 Miles, CHIEF PEAK - 2.89 Miles, ROMERO - 9.79 Miles).
• Scale and Orientation: Maps include scale bars in miles and north arrows for spatial reference.

This document is crucial for bidders to understand the physical locations and extent of the roads involved in the opportunity. It aids in assessing the scope of work, planning logistics, and potentially estimating costs associated with any road-related contract requirements.

Form / Attachment / Pricing Sheet

This document is a collection of maps detailing the East Camino and Romero Camuesa Roads within the Los Padres National Forest, Pacific Southwest Region. It serves as a visual aid for understanding the road network relevant to a potential contract opportunity.

• Road Names and Lengths: Identifies specific roads such as Nordhoff RD, Romero Camuesa, East Camino, Chief Peak, and Remote Radio, along with their respective lengths in miles.
• Geographic Features: Depicts topographical features, water bodies (e.g., Santa Ynez River, Blue Canyon), and named locations (e.g., Romero Saddle, Blue Canyon Pass, Bar Flat).
• Road Markings: Uses color-coding and numbered points to indicate different road segments and points of interest or contract-related locations.
• Scale and Legend: Provides a map scale in miles and a legend to interpret road types and contract road designations.

These maps are crucial for bidders to visualize the scope of work related to road maintenance, construction, or access within the specified forest area. They help in understanding the terrain, the extent of the road network, and the specific routes involved in the opportunity, aiding in bid preparation and logistical planning.

Wage Determination

This document is a Service Contract Act (SCA) wage determination for the County of Ventura, California, issued by the U.S. Department of Labor, Employment Standards Administration, Wage and Hour Division. It lists prevailing wage rates and fringe benefits required for various occupations performing contract work in that area.

• Applicability: This wage determination applies to contracts covered by the Service Contract Act.
• Occupational Listings: The document provides a comprehensive list of occupations, each with a corresponding wage rate. These include administrative, automotive, food service, health, information technology, instructional, maintenance, protective service, and transportation occupations, among others.
• Fringe Benefits: All listed occupations are entitled to fringe benefits as specified in the document. Specific details on health and welfare benefits, vacation, and paid holidays are provided.
• Executive Orders: The document references Executive Order (EO) 13706 (Establishing Paid Sick Leave for Federal Contractors) and EO 13658 (Establishing a Minimum Wage for Federal Contractors), outlining their applicability and requirements.
• Conformance Process: Instructions are provided for contractors needing to classify employees for occupations not explicitly listed in the wage determination, including the process for requesting authorization of additional classifications and wage rates.
• Hazardous Pay: Specific differentials are noted for work involving ordnance, explosives, and incendiary materials.
• Uniform Allowance: Requirements for providing and maintaining uniforms are outlined.

This wage determination is crucial for bidders to accurately estimate labor costs for their proposals. It establishes the minimum wage rates and fringe benefits that must be paid to service employees performing work under the contract, ensuring compliance with federal labor laws.