FRCE: Site Prep for Ultrasonic Degreaser B133

Amendment / Modification

This amendment (0001) to solicitation N4008526B0010 is being issued to include FAR 52.222-90, "Addressing DEI Discrimination by Federal Contractors." This clause addresses racially discriminatory diversity, equity, and inclusion (DEI) activities and requires contractors to comply with its terms.

• FAR 52.222-90, "Addressing DEI Discrimination by Federal Contractors" (Deviation DATE) has been added.

• The amendment does not explicitly state if proposal deadlines or submission requirements have been extended or modified. However, bidders must acknowledge receipt of this amendment and ensure their proposals comply with the newly included clause.

Solicitation / RFP / RFQ

This solicitation (N4008526B0010) is for "Site Prep for Ultrasonic Degreaser Building 133" at Marine Corps Air Station Cherry Point, North Carolina. The acquisition is being solicited under Full and Open Competition.

• The specific work is detailed in Specification Section 01 11 00, Summary of Work.

• The project magnitude is estimated between $1,000,000 and $500,000,000.

• All work shall be completed within 380 calendar days after award.

• The contract type is anticipated to be a Firm Fixed Price contract.

• The estimated cost range is between $1,000,000 and $5,000,000.

• The Bid Due Date is June 1, 2026, at 12:00 PM EST.

• Bid bonds are required for proposals valued at $150K and greater. Payment bonds are required for proposals valued at $35K and greater. Performance bonds are also required for proposals valued at $150K and greater.

• Proposals must be submitted electronically as an electronic copy of the bid bond with the proposal.

• Pre-Bid Inquiries (RFIs) cut-off is May 12, 2026, at 12:00 PM EST.

• Site Visit is scheduled for May 5, 2026, at 10:00 AM.

• This acquisition is being solicited under Full and Open Competition.

• NAICS Code: 236220 Commercial and Institutional Building Construction, with a Small Business Size Standard of $45,000,000.

• Bidders are advised that funding may not become available, and if so, no award will be made.

• Bidders will not be reimbursed for any effort or proposed costs associated with bid preparation.

• All changes to the solicitation will be issued via Amendment and posted on the SAM website.

Specification

This document outlines the specifications for:

• Division 00 - Procurement and Contracting Requirements: Includes a list of drawings.

• Division 01 - General Requirements: Covers various aspects including summary of work, work restrictions, price and payment procedures, administrative requirements, electronic construction and facility support contract management system (eCMS), small project construction progress schedules, submittal procedures, governmental safety requirements, sources for reference publications, quality control, temporary construction facilities and controls, temporary environmental controls, construction waste management and disposal, closeout submittals, and operation and maintenance data reports.

• Division 02 - Existing Conditions: Addresses demolition and lead remediation.

• Division 03 - Concrete: Details cast-in-place concrete and plant-precast concrete products for below-grade construction.

• Division 05 - Metals: Covers structural steel and metal stairs.

• Division 06 - Wood, Plastics, and Composites: Includes fiberglass reinforced plastic (FRP) grating.

• Division 07 - Thermal and Moisture Protection: Pertains to joint sealants.

• Division 08 - Openings: Covers access doors and panels.

• Division 09 - Finishes: Includes chemical resistant resinous flooring and paints and coatings.

• Division 11 - Equipment: Covers sterilizers and associated equipment.

• Division 22 - Plumbing: General purpose plumbing requirements.

• Division 23 - Heating, Ventilating, and Air Conditioning (HVAC): Includes basic mechanical materials and methods, thermal insulation for mechanical systems, water chillers, vapor compression type, and chilled, chilled-hot, and condenser water piping systems.

• Division 26 - Electrical: Covers interior distribution systems.

• Division 31 - Earthwork: General earthwork requirements.

• Project Table of Contents: Outlines all divisions and sections covered in the specifications.

• List of Drawings: Document 00 01 15 provides a list of NAVFAC drawing numbers and titles.

• Summary of Work (Section 01 11 00): Details the project description, location, occupancy of premises, existing work, underground utilities, and NMCI coordination requirements.

• Work Restrictions (Section 01 14 00): Outlines references, submittals, and special scheduling requirements.

• Administrative Requirements (Section 01 30 00): Covers supervision, communication, duties, non-compliance actions, preconstruction meetings, and facility turnover planning.

• Electronic Construction and Facility Support Contract Management System (eCMS) (Section 01 31 23.13 20): Details requirements for using the eCMS for contract administration, user privileges, system requirements, connectivity, security classification, and utilization.

• Small Project Construction Progress Schedules (Section 01 32 16.00 20): Specifies requirements for baseline construction schedules, monthly updates, and 3-week look-ahead schedules.

• Submittal Procedures (Section 01 33 00): Outlines submittal descriptions, classification, forwarding procedures, and formats for various submittals.

• Temporary Construction Facilities and Controls (Section 01 50 00): Covers construction site plans, backflow preventers, temporary traffic control, fencing, temporary wiring, and cybersecurity during construction.

• Temporary Environmental Controls (Section 01 57 19): Details references, definitions, submittals, environmental protection requirements, waste management, and pollution prevention.

• Construction Waste Management and Disposal (Section 01 74 19): Covers definitions, construction waste management, implementation, oversight, special programs, waste streams, disposal, and records.

• Closeout Submittals (Section 01 78 00): Specifies requirements for as-built drawings, operation and maintenance manuals, spare parts data, warranty management, and performance bonds.

• Operation and Maintenance Data (Section 01 78 23): Details requirements for O&M manuals, facility data workbooks, and training.

• Reports (Section 01 80 00): Includes asbestos and lead paint inspection reports and use of information.

• Cast-in-Place Concrete (Section 03 30 00): Covers references, definitions, submittals, materials, quality assurance, batching, mixing, transporting, placing, finishing, and waste management.

• Plant-Precast Concrete Products for Below Grade Construction (Section 03 42 13.00 10): Details system description, fabrication, placement, and quality assurance for precast concrete products.

• Structural Steel (Section 05 12 00): Covers references, submittals, quality assurance, fabrication, and erection of structural steel.

• Metal Stairs (Section 05 51 00): Details references, products, fabrication, and installation of metal stairs.

• Fiberglass Reinforced Plastic (FRP) Grating (Section 06 73 01): Covers references, submittals, quality control, delivery, handling, storage, fabrication, performance requirements, and installation of FRP grating.

• Joint Sealants (Section 07 92 00): Details references, submittals, product data, environmental conditions, delivery, storage, quality assurance, application, and protection/cleaning.

• Chemical Resistant Resinous Flooring (Section 09 67 23.14): Covers references, submittals, product data, environmental requirements, delivery, storage, quality assurance, application, and surface preparation.

• Paints and Coatings (Section 09 90 00): Details related requirements, references, submittals, quality assurance, and application procedures for paints and coatings.

• Sterilizers and Associated Equipment (Section 11 71 00): Covers references, submittals, logistical classification, standard commercial products, manufacturer's nameplates, electrical work, and factory testing for sterilizers.

• Plumbing, General Purpose (Section 22 00 00): Covers references, submittals, materials, installation, testing, and electrical work for plumbing systems.

• Water Chillers, Vapor Compression Type (Section 23 64 10): Details references, submittals, safety requirements, delivery, storage, handling, project requirements, standard commercial products, manufacturer's nameplates, electrical work, self-contained water chillers, and factory test scheduling and reports.

• Chilled, Chilled-Hot, and Condenser Water Piping Systems (Section 23 64 26): Covers references, system description, submittals, safety requirements, delivery, storage, handling, installation, and testing of piping systems.

• Thermal Insulation for Mechanical Systems (Section 23 07 00): Details references, submittals, quality assurance, delivery, handling, storage, materials, installation, and equipment insulation systems.

• Interior Distribution System (Section 26 20 00): Covers references, submittals, materials and equipment, installation, and quality assurance for interior electrical distribution systems.

• Earthwork (Section 31 00 00): Covers references, definitions, subsurface data, criteria for bidding, submittals, quality control, contaminated soils, excavation, borrow, and disposition of surplus material.

• Demolition (Section 02 41 00): Covers references, project description, general requirements, items to remain in place, availability of work areas, submittals, and quality assurance for demolition activities.

• Lead Remediation (Section 02 83 00): Details references, definitions, description of work, quality assurance, equipment, project/site conditions, materials, and execution related to lead remediation.

This document is a comprehensive set of specifications for a construction project, likely a solicitation or part of a larger contract package. It details requirements for materials, installation, quality control, safety, environmental protection, and closeout procedures across various trades and systems.

Submittals are required for various sections, including preconstruction submittals, product data, shop drawings, test reports, certifications, and closeout submittals. Specific submission requirements and timelines are outlined within each section. Evaluation will be based on compliance with these specifications and referenced standards.

Not explicitly stated in this document, but general requirements for contractor qualifications and experience are mentioned in various sections (e.g., for installers, testing laboratories, and precast concrete producers).

Form / Attachment / Pricing Sheet

This document contains the "Index of Drawings" for the "Building 133 Facility Preparation and Provide Ultrasonic Cleaning System" project at MCAS Cherry Point, NC. It serves as a table of contents for all architectural, structural, mechanical, and electrical drawings associated with the project.

• Sheet Number
• NAVFAC Number
• Plate Number
• Sheet Title
• Project Number (PE-22034)
• Project Station (MCAS Cherry Point, NC)
• Contract Number (NAVFAC Drawing No. 12892403, etc.)

This document is crucial for bidders to understand the scope and organization of the project's technical documentation. It allows them to quickly locate specific drawings related to different aspects of the facility preparation and the installation of the ultrasonic cleaning system, aiding in bid preparation and understanding of project requirements.