AMENDMENT 0002- FY26- AFLCMC Mold Cleaning

Questions & Answers / Clarifications

This document provides responses to vendor questions regarding the scope of work, remediation, and build-back requirements for a mold and moisture intrusion remediation project.

• Moisture Intrusion: The source of moisture intrusion has been identified and corrected. Contractors should confirm if active conditions remain or if residual moisture needs addressing.
• Testing: The Government will not perform or provide independent air quality and clearance testing. The CDC does not recommend routine air sampling for mold, and the Government does not request contractors to provide it.
• Material Removal: Contractors should assume that all visibly mold-affected materials (carpet, ceiling tiles, drywall) are to be removed and replaced, unless deemed unsalvageable at the COR's direction. Room 117 may require full demolition and replacement.
• Hidden Conditions: If additional mold or moisture damage is discovered beyond visible areas, contractors must pause work and notify the COR for direction. Remediation should focus on visibly affected surfaces, assuming the source of moisture has been repaired.
• Build-Back: Restoration is limited to repairing identified damaged ceiling grid, replacing all ceiling tiles, cleaning mold from surfaces (including furniture), and removing carpet. No build-back beyond localized ceiling/grid repair is required.
• Furniture: Furniture identified as mold-affected is to be cleaned in place. All unsalvageable furniture will be disposed of by the government prior to the work start date.
• Ceiling Scope: All ceiling tiles will be replaced, and damaged grid areas will be identified. Approximately 2890 ceiling tiles and 104 sf of damaged ceiling grid are anticipated.

This document clarifies specific aspects of the scope of work, particularly concerning the extent of remediation, material replacement, testing responsibilities, and furniture handling. Bidders should incorporate these clarifications into their proposals to ensure accurate cost and schedule estimations.

Statement of Work (SOW)

To provide mold cleaning, abatement, remediation services, and ceiling repair at AFLCMC, Bldg. 856, Montgomery, AL 36114.

• Furnish all labor, services, tools, materials, equipment, and supervision for mold remediation.

• Contractor must be certified in mold cleaning, abatement, and remediation.

• Work includes removal of moisture-damaged and mold-contaminated materials.

• Cleaning and treatment of affected wall cavities, carpets, vents, return registers, light fixtures, and ceiling tiles.

• Specific tasks include:

  • Cleaning and treating opened wall cavities with EPA-registered disinfectant and mold inhibitor.
  • Air testing and moisture level testing prior to build-back.
  • Replacing 2890 ceiling tiles.
  • Cleaning carpets with EPA-registered disinfectant and mold inhibitor.
  • Cleaning 78 vents/return registers and 163 light fixtures.
  • Cleaning all furniture and system furniture.
  • Cleaning and treating wall surfaces in rooms 112, 117, and 207.
  • Minimizing impact on building occupants and construction dust.
  • Daily cleaning and disposal of construction debris.
  • Specific remediation tasks for Rooms 112, 117, and 207, including replacing ceiling tiles and repairing ceiling grid in Room 207.

• Work must be completed in accordance with industry standards, applicable safety regulations, and Government contract specifications.

• Product data sheets and safety data sheets for all chemicals must be submitted prior to work commencement.

• A mold protocol will be prepared for review.

• Place of Performance: AFLCMC, Bldg. 856, 201 E. Moore Drive, Montgomery, AL 36114.

• Performance Period: Within 60 calendar days from contract award.

• Operational Coverage: Normal business hours (7:00 am to 4:30 pm, Monday-Friday), excluding federal holidays.

• Contractor Qualifications: Must be a firm with expertise in mold abatement, remediation, demolition, and cleaning. Must provide proof of qualifications, insurance, OSHA certifications, and any applicable State certifications. Supervisory personnel must be a qualified competent person with OSHA mold cleaning abatement and remediation training.

• General Requirements: Awareness training on mold exposure, appropriate respiratory protection, and medical evaluation.

• Warning Signs: Work areas must be sealed and marked with appropriate signs.

• Dumpster Requirements: Coordinate dumpster placement with COR/Facility Manager.

• Disposal of Waste: Contractor responsible for waste disposal in accordance with regulations.

• Contractor Storage: On-site storage area security is the contractor's responsibility.

• Electrical/Communications: Do not disturb facilities; notify COR 24 hours in advance for removals.

• Materials Removed: Salvageable materials remain government property; unsalvageable materials are C&D waste.

• Construction and Demolition Wastes: Separate and handle hazardous wastes; dispose of all waste per regulations.

• Security Requirements: Notify contracting officer 30 days before on-base performance, including employee information, contract details, and location/dates of service. Obtain base identification and vehicle passes for personnel. Comply with installation access control, traffic laws, and controlled/restricted area entry requirements. Report security threats. No unauthorized wireless electronic devices, firearms, ammunition, or illegal weapons.

Questions & Answers / Clarifications

This document provides clarifications and answers to questions raised by potential bidders regarding the solicitation for mold remediation services.

• Moisture Intrusion & Remediation: The source of moisture intrusion has been identified and corrected. Contractors should confirm if active moisture remains and if residual moisture remediation is anticipated. The Government does not intend to perform additional testing beyond what is stated in the SOW.
• Scope of Material Removal: Contractors should assume that only visibly mold-affected materials deemed unsalvageable at the COR's direction are to be removed and replaced. Full demolition and replacement may be required in specific areas like Room 117.
• Discovery of Additional Damage: If additional mold or moisture damage is discovered beyond visible areas, contractors should pause work and notify the COR for direction. Remediation is expected for all visibly affected surfaces where the source of moisture has been repaired.
• Testing & Clearance: The Government will not provide independent air quality and clearance testing; the contractor is responsible for performing and documenting all testing. There are no specific health-based clearance standards beyond general CDC recommendations for air quality evaluations.
• Containment: Localized isolation is expected for affected rooms, not full negative air containment.
• Repairs & Build-Back: The contractor will repair identified damaged ceiling grid, replace all ceiling tiles, clean surface mold in affected rooms (including furniture), and remove identified carpet. No build-back beyond localized ceiling/grid repair is required.
• Debris Removal: Debris removal will be coordinated at the project start. Elevator access will be available for second-floor areas. Mold-contaminated materials will be disposed of as standard construction and demolition waste.
• Affected Areas & Quantities: An estimated 13,171 square feet are impacted across Rooms 112, 117, and 207. Approximately 2890 ceiling tiles and 104 sf of damaged ceiling grid require replacement. Furniture within the rooms is considered mold-affected and will be cleaned in place.

This document clarifies the scope of work, material handling, testing responsibilities, and build-back requirements, which may impact bidder proposals and cost estimations. Key deadlines and submission rules do not appear to be directly affected by these clarifications.

Amendment / Modification

• Suspense Date/Time Update: The solicitation suspense date and time have been extended from May 12, 2026, at 12:00 PM CDT to May 15, 2026, at 12:00 PM CDT.

• Addition of Q&A: Attachment 3, containing Questions and Answers, has been added.

• Service Description Change: The description of services has been updated from "Mold Remediation" to "Mold Cleaning" throughout the document.

• SOW Update: Paragraph 2 of the Statement of Work (SOW) has been updated.

• Solicitation suspense date and time.

• Statement of Work (SOW), Paragraph 2.

• Overall description of services (changed from Mold Remediation to Mold Cleaning).

• Attachment 3 (Questions and Answers) has been added.

• The proposal submission deadline has been extended to May 15, 2026, at 12:00 PM CDT.

Amendment / Modification

• The solicitation suspense date and time have been updated from 04 May 2026 at 12:00 PM CDT to 12 May 2026 at 12:00 PM CDT.

• This update allows additional time for the Mission Partner to answer questions and make appropriate updates to the Statement of Work.

• The solicitation suspense date and time.

• The Statement of Work (SOW) may be updated.

• The proposal submission deadline has been extended to 12 May 2026 at 12:00 PM CDT.

• Offerors are encouraged to submit all pertinent questions by email no later than 30 Apr 2026 by 01:30 PM CDT.

Solicitation / RFP / RFQ

This is a combined synopsis/solicitation for commercial services to procure mold removal and remediation services for the Air Force Life Cycle Management Center (AFLCMC) at Maxwell-Gunter Annex, AL. The government is soliciting "open market" offers only; GSA or GWAC quotes will not be considered. This requirement is a 100% small business set-aside, meaning only offers from small businesses will be reviewed.

• The core requirement is mold removal and remediation for Building 856, Rooms 112, 117, and 207.

• Offerors must provide a detailed remediation plan outlining their technical approach to safe containment and removal of mold, meeting minimum requirements outlined in the Statement of Work (SOW), specifically paragraphs 2 and 7-15.

• Offerors must provide documentation demonstrating that all key personnel possess current, relevant mold remediation certifications as per SOW paragraph 6.

• Offerors must propose a realistic service start date.

• A firm-fixed-price award will be made.

• NAICS Code: 562910; Size Standard: $25M.

• Place of Performance: AFLCMC, 201 E Moore Dr, Building 856, Maxwell-Gunter Annex, AL 36114.

• Offers must be complete, self-sufficient, and respond directly to the solicitation requirements.

• Prices must be held firm for 30 calendar days from the offer receipt date.

• A site visit is scheduled for Tuesday, April 28, 2026, at 10:00 AM CDT at Maxwell-Gunter Annex. Attendees must meet at the Maxwell Blvd Gate, Visitor's Center at Maxwell AFB, AL at 09:00 AM CDT to receive visitor passes. Names of attendees must be submitted by Friday, April 24, 2026, at 03:00 PM CDT.

• All pertinent questions must be submitted by email no later than April 30, 2026, by 01:30 PM CDT.

• Offers must be submitted via email to Amn Matthew Diaz (matthew.diaz.15@us.af.mil) and William M Griffiths (william.griffiths.5@us.af.mil) by 12:00 PM CDT on May 04, 2026.

• Award will be based on technical acceptability and price (best value acquisition).

• Technical acceptability will be evaluated on a pass/fail basis for the remediation plan and personnel certifications.

• Price reasonableness will be determined using various techniques.

• This requirement is a 100% Small Business Set-Aside.

• Contractors MUST BE REGISTERED AND ACTIVE in the DoD Systems for Award Management (SAM) database at the time of offer submission to be eligible for award.

• Attachment 1: Statement of Work

• Attachment 2: Clauses and Provisions

• Attachment 3: Wage Determination

Forms / Attachments / Pricing Sheets

This document lists clauses and provisions that are incorporated by reference into a solicitation or contract. It serves as a reference for bidders to understand the legal and regulatory requirements that will apply to any resulting contract.

• Clause Number: The unique identifier for each clause or provision.
• Clause Title: A brief description of the subject matter of the clause.
• Alt No/Dev No: Indicates any alternative or deviation numbers associated with the clause.
• Year-Mo: The year and month the clause was last updated.
• Section: The section of the contract or solicitation where the clause is located (e.g., SEC I, SEC K, SEC L, SEC G).
• Full Text Clauses: Some clauses are provided in full text, detailing specific prohibitions, representations, or procedures. Notable examples include:
  • Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services (252.204-7017).
  • Requirements related to System for Award Management (SAM) registration and maintenance (52.204-13, 52.204-7).
  • Payment instructions via Wide Area WorkFlow (WAWF) (252.232-7006).
  • Statement of Equivalent Rates for Federal Hires (52.222-42).
  • Contractor Access to Air Force Installations (5352.242-9000).

Bidders must review these incorporated clauses and provisions to understand their obligations and requirements if awarded a contract. This includes understanding:

• Reporting and representation requirements (e.g., SAM registration, telecommunications equipment).
• Payment procedures and systems (e.g., WAWF).
• Labor standards and wage rates.
• Access requirements for government installations.
• Any specific prohibitions or restrictions related to the procurement.

Statement of Work (SOW) / Performance Work Statement (PWS)

This Statement of Work (SOW) outlines the requirements for mold abatement, remediation services, and ceiling repair at the Air Force Life Cycle Management Center (AFLCMC).

• The contractor shall provide all labor, services, tools, materials, equipment, transportation, and supervision for mold abatement and remediation.

• This includes the removal of mold-contaminated materials, cleaning and treatment of affected areas with EPA-registered disinfectant, and application of a mold inhibitor.

• Specific areas for remediation include furniture, carpet, and ceiling tiles/grids in Rooms 112, 117, and 207 in Bldg. 856.

• The contractor must minimize impact on building occupants and construction dust.

• Daily cleaning and disposal of construction debris are required.

• All work must be completed in accordance with industry standards, applicable safety regulations, and government contract specifications.

• Surfaces abated must be wiped with an EPA-registered disinfectant and coated with a mold inhibitor.

• A mold protocol will be prepared for review prior to work commencement.

• Contractor must submit product data sheets and safety data sheets for all chemicals used.

• A project schedule indicating work activities and completion dates must be submitted.

• Place of Performance: AFLCMC, Bldg. 856, 201 E. Moore Drive, Montgomery, AL 36114.

• Performance Period: All work must be accomplished within 60 calendar days.

• Operational Coverage: Normal business hours are 7:00 am to 4:30 pm, Monday through Friday, excluding federal holidays.

• Contractor and all subcontractors must hold current certifications in mold abatement and remediation.

• Contractor must provide proof of qualifications, insurance, OSHA certifications, and any applicable State certifications.

• Supervisory personnel must be a qualified competent person as defined by OSHA, with completed OSHA mold abatement and remediation training.

• General requirements include PPE, awareness training, infection control, and proper warning signs.

• Disposal of waste materials must comply with regulations, with a focus on minimizing dust spread.

• Fire alarm/fire suppression system components must be protected; removal requires a licensed NICET II or higher technician.

• Contractor must comply with installation access, security, traffic, and controlled/restricted area regulations, including obtaining base identification and vehicle passes.

Form / Attachment / Pricing Sheet

This document is a U.S. Department of Labor Wage Determination under the Service Contract Act (SCA). It establishes the minimum wage rates and fringe benefits required for various occupations performing work on federal contracts in specific geographic areas. For this opportunity, it applies to the Alabama counties of Autauga, Elmore, Lowndes, and Montgomery.

• Wage Rates: Lists minimum hourly wage rates for a wide range of occupations, from administrative support to technical and transportation roles.
• Fringe Benefits: Details required health and welfare benefits, paid sick leave (EO 13706), vacation time, and paid holidays.
• Executive Order Applicability: Notes the applicability of Executive Orders 13706 (Paid Sick Leave) and 13658 (Minimum Wage) and their specific requirements.
• Footnotes: Provides specific guidance for computer employees (exemptions) and night/Sunday pay for air traffic controllers and weather observers.
• Hazardous Pay: Outlines differential pay rates for working with ordnance, explosives, and incendiary materials.
• Uniform Allowance: Details requirements for providing and maintaining uniforms.
• Conformance Process: Explains the procedure (using Standard Form 1444) for classifying and determining wages for occupations not explicitly listed in the determination.

This wage determination is crucial for bidders to accurately calculate labor costs for their proposals. Contractors must ensure that all service employees working on the contract are paid at least the minimum wage rates and provided the specified fringe benefits listed herein. Failure to comply can result in violations of the Service Contract Act.