Hume Basin Stewardship IRSC, Sequoia National Forest, California

Amendment / Modification

• The proposal due date has been extended from March 20, 2026, 4:00 PM PST to March 27, 2026, 4:00 PM PST.

• This extension is to allow additional time for site visits due to clearing snow from roads to previously inaccessible areas.

• Solicitation due date.

• The deadline for proposal submissions has been extended to March 27, 2026, 4:00 PM PST.

Amendment / Modification

This document is Amendment 002 to the Hume Basin Stewardship IRSC, specifically updating Appendix A, "Technical Specifications for Service Work Items." The amendment introduces several changes and clarifications to the work items, including:

• Mandatory Item 1 & 1.1 (Thin from Below/Sanitize Plantations): Clarifies specifications for cutting and removing timber, including requirements for handling tops, limbs, and woody debris, skidding, felling hazard trees, and retaining snags and down logs. It also details protection measures for leave trees and specifies hand felling in recreation residences.
• Mandatory Item 2 & 2.1 (Roadside Hazard/Sanitation Trees): Updates specifications for cutting and removing hazard trees along Tenmile Road and Huckleberry Road. This includes criteria for identifying hazard trees, requirements for felling, skidding, piling debris, and protecting leave trees. It also specifies stump height for scenic integrity and hand felling in SMZs.
• Optional Item 3 (Thin from Below/Sanitize Plantations): Provides updated acreage for this item and reiterates specifications for cutting, removing timber, handling debris, retaining snags and down logs, and protecting leave trees. It also details hand felling in SMZs.
• Optional Item 4 (Piling of Material in Units): Outlines requirements for piling material, including conditions for exercise of this item, pile construction methods, fire line requirements, and limitations on pile size and location. It also specifies hand piling in SMZs.
• Optional Item 5 (Biomass Removal): Details the availability of timber products for subsidized removal by rail, including title transfer, debarking requirements for logs transported outside ecological zones, and bark retention specifications.
• Section III – Control of Work: Updates conditions under which work may be done, including timing restrictions, limited operating periods, fire risk, raptor nest restrictions, and soil moisture conditions.
• Section IV – Inspection and Acceptance: Provides updated government inspection procedures, including daily inspections, unit inspection requests, and formal plot inspections. It details criteria for acceptable quality levels (AQL) for various work items and outlines procedures for unsatisfactory performance and reinspection requests.
• Section V – Payment Methods: Clarifies methods of measurement for acreages and acceptance/payment terms for different work items, including AQLs and rework requirements.
• Section VI – Definitions: Adds and clarifies definitions for various terms used throughout the contract, such as AQL, Biomass Trees, Coarse Woody Debris, Damaged Trees, and Unsatisfactory Work.

This amendment significantly modifies Sections I (Description of Work), II (Work Items), III (Control of Work), IV (Inspection and Acceptance), V (Payment Methods), and VI (Definitions) of the original document, particularly impacting the specifications for various cutting, removal, and piling tasks.

Bidders should review all updated specifications, particularly regarding work item requirements, inspection criteria, and payment terms, to ensure their proposals accurately reflect the amended contract requirements. Key deadlines and submission instructions are not explicitly altered by this amendment, but the detailed work requirements necessitate careful review for accurate bidding.

Amendment / Modification

This amendment (0002) modifies solicitation 12363N26Q4028 for the Hume Basin Stewardship IRSC project.

Key changes include:

• Extension of the proposal due date from March 16, 2026, 4:00 PM PST to March 20, 2026, 4:00 PM PST. This extension is to accommodate a delay in amending the technical specifications.

• Call Order changes related to the "protection of improvements" section.

• Clarification of notes within the document.

• Changes to volume and acres to account for additional Stewardship and Management Zone (SMZ) work.

• Inclusion of site visit notes from February 5th.

• Amended documents and site visit notes are attached.

• Technical specifications for SMZ work (Appendix A).

• Volume and acres for SMZ work (Appendix B).

• "Protection of improvements" section.

• The proposal due date has been extended to March 20, 2026.

Amendment / Modification

This document is Amendment 002 to Solicitation 12363N26Q4028.

• The "Period for acceptance of offers" in FAR 52.212-1(c) has been revised to 60 calendar days from the date specified for receipt of offers.

• Offerors must hold their prices firm for 60 calendar days from the specified receipt date.

• The current response date for proposals has been extended to March 20, 2026.

Questions & Answers / Clarifications

This document provides answers to questions raised during a site visit for the Hume Basin IRSC project, clarifying details related to the solicitation.

• Funding & Optional Units: Optional units are not likely to be funded, with priority given to thinning from below. The project is funded from a single pot and should not exceed two years. Funding for mandatory items is sufficient, and any shortfall would result in an Anti-Deficiency claim.
• Work Order: Items are to be completed in order: 1, 2, 3, and then 4.
• Marking & Material: Hazard and sanitation trees in HT units are marked for removal. Other harvest trees use DxP designation. Unit boundaries are virtual, except for private property lines marked with orange paint. Sub-merchantable material (0-9.9 inches) will generally be left standing.
• Volume & Estimates: The 3.5 million board feet is for mandatory work only. Cull material estimation used a Sample Tree (STR) method. Error margins for timber cruises were 30-40% for Thin/Thin from below units and 200% for Hazard Tree strata.
• Optional Work Prioritization: Bidding for optional work should assume units with excess of 40 tons per acre (after initial cut/skid/deck/haul) will be prioritized.
• Timber Subject to Approval (TSA): Refers to cull logs and excess material not in the mandatory haul. Bidders can negotiate pricing for TSA later if not included in the initial proposal.
• Cabin Units: There are 46 cabins within the unit. Water is shut off in winter, but power remains on. Access is year-round but can be difficult in winter. A map will be provided upon award, but contractors are encouraged to walk the site.
• Roads: Tenmile Road is open year-round but can be difficult in winter. Road closures by the contractor should not exceed 30 minutes. Caltrans manages Hume Lake Road. Roads and bridges are suitable for heavy machinery.
• Archeology: Archeological sites in the project area are of moderate to low significance. For larger sites, coordination with the COR and District Archeologist is required for logging plans.

Clarifies details regarding funding, work order, material handling, volume estimates, prioritization of optional work, and specific site conditions (cabins, roads, archeology), which may influence bidder proposals and execution plans.

Amendment / Modification

This document is Amendment 002 to the Hume Basin Stewardship IRSC contract. It modifies various sections of the original contract, including:

• Appendix B - Scaled Timber Removal Specifications: This amendment details numerous changes and additions to the timber removal specifications, covering aspects such as:
  • Timber designations (B2.3) and utilization standards (B2.2).
  • Rates of payment (B3.0) and other payment rates (B3.4).
  • Payments, including Integrated Resource Account (B4.2) and various deposit types.
  • Transportation facilities (B5.0) and operations (B6.0), including safety, oil discharge prevention, hazardous substances, and acceptance of work.
  • Conduct of logging (B6.4), including felling, bucking, limbing, skidding, and yarding methods.
  • Erosion prevention and control (C6.6#).
  • Slash treatment (C6.7#) methods and specifications.
  • Fire precautions (C7.2#) and emergency precautions (C7.22#), including Project Activity Levels (PAL) and associated equipment requirements.
  • Use of timber (C8.66#).
• Division A - Specific Conditions: Updates to location and area, volume estimates, and timber designations.
• Applicable Regional Clauses: Updates to various clauses related to timber removal, operations, and environmental protection.

Numerous sections within Appendix B, Division A, and various clauses (C2.30#, C2.35#, C5.12#, C5.35#, C6.241, C6.311, C6.315#, C6.36#, C6.37, C6.41#, C6.42#, C6.5, C6.6#, C6.7#, C6.817#, C7.22#, C8.66#) have been modified or added.

Bidders should review all modified sections carefully as they impact the requirements for timber removal, operations, safety, environmental protection, and fire precautions. Specific details on timber designations, utilization standards, payment rates, logging methods, erosion control, slash disposal, and fire safety measures are updated. The Project Activity Level (PAL) system and associated fire precautions are also detailed, which may affect operational timing and requirements.

Form / Attachment / Pricing Sheet

This document is Contract Area Map 1 of 2 for the Hume Basin Stewardship IRSC project within the Sequoia National Forest, Hume Lake Ranger District. It visually delineates various treatment units, contract areas, and operational zones relevant to the stewardship contract.

• Legend: Provides definitions for numerous symbols and patterns used on the map, including different types of treatment units (e.g., Item 1, Item 2, Roadside Hazard Tree Units), contract area boundaries, limited operating periods (LOPs), recreation sites, and special management zones (e.g., Riparian Conservation Area, Giant Sequoia Groves).
• Map Area: Displays the geographical layout of the Hume Basin, highlighting specific numbered treatment units and areas designated for various activities.
• Requirements Table: Details specific requirements associated with different contract items, such as "Directional Felling," "Ground Based Skidding," and "Limited Operating Period" (LOP) dates.
• Vicinity Map: Shows the broader geographical context of the Hume Lake area within the surrounding national forest and park boundaries.

This map is crucial for bidders to understand the physical scope and specific locations of work required under the Hume Basin Stewardship IRSC contract. It visually communicates the boundaries of treatment units, operational constraints (like LOPs), and the types of activities planned for different areas, directly impacting proposal planning and execution strategy.

Form / Attachment / Pricing Sheet

This document is Contract Area Map 2 of 2 for the Hume Basin Stewardship IRSC (Integrated Resource Service Contract) within the Sequoia National Forest, Hume Lake Ranger District. It visually depicts the contract area, treatment units, and relevant features for the project.

• Map Area: Details the specific geographic boundaries of the contract area.
• Legend: Provides definitions for various symbols and patterns used on the map, including:
  • Treatment Unit Numbers (Items 1, 2, 2.1, 3)
  • Contract Area boundaries (LOP3, Section 8, B1.1, C7.2#)
  • Plantation Units (Optional Items 3, 5)
  • Roadside Hazard Tree Units (Optional Items 2, 2.1)
  • Existing Transportation System
  • Protection of Improvements (Recreation Sites, Fences, Power Lines, Gates)
  • Limited Operating Periods (LOP3)
  • Recreation Site Boundaries
  • Riparian Conservation Areas, Hume Lake, Meadows
  • Special Use Areas, Giant Sequoia Groves, National Park, Private Land, Stream Management Zones
• Requirements Table: Lists specific contract items (Mandatory Items 1, 2; Optional Items 3, 4) and associated requirements such as Felling, Limited Operating Periods (LOP3), Designation by Damage Class (DxDam), Designation by Prescription (DxP), Ground Based Skidding methods (Endlining, Mechanical Harvest, One End Suspension, Skid Trail Layout), Minimum Stump Height, and Special Erosion Prevention Measures (SEPM).
• Requirement Explanations: Defines abbreviations used in the Requirements Table (e.g., DF, DxDam, DxP, ENDL, Fell, LOP3, MH, Min, SEPM, SUSP, TRAC, TS, Whole).
• Vicinity Map: Shows the general location of the contract area relative to surrounding areas and major roads.

This map is crucial for bidders to understand the physical scope and location of the work. It visually defines the areas where treatments are to be performed, identifies specific units, and highlights important features like riparian areas, recreation sites, and existing infrastructure that may affect operations. The legend and requirements table provide essential details on the types of work, operational constraints (like Limited Operating Periods), and specific felling and skidding requirements that will impact planning and execution of the contract.

Amendment / Modification

• The due date for proposals has been extended from March 2, 2026, 4:00 PM PST to March 16, 2026, 4:00 PM PST.

• This extension is to accommodate a forthcoming amendment that will adjust technical specifications.

• Item 9B (Date of Solicitation) and the "Bids due date" have been changed.

• The Period of Performance has been updated from 03/31/2026 to 03/01/2029.

• The deadline for proposal submission has been extended to March 16, 2026.

Statement of Work (SOW) / Performance Work Statement (PWS)

To improve or maintain forest health, heterogeneity, and resiliency; maintain and improve wildlife habitat; and reduce fuels and restore fire into the ecosystem by thinning from below and sanitizing trees in overstocked plantations, particularly in the upper Tenmile and Bearskin Creek drainages. The goal is to reduce risk from beetle attack and stress from increased inter-tree competition.

This document outlines several work items, primarily focused on tree cutting and removal, and associated tasks:

• Mandatory Item 1 & 1.1 (Thin from Below/Sanitize Plantations): Remove live and dead conifer trees up to 20 inches diameter at breast height (DBH) and dead trees of any size that meet sanitation criteria. This includes sanitizing trees within 100 feet of specific access roads (Tenmile and Huckleberry) based on hazard criteria. It also involves hand piling or mechanical piling of dead and down fire or insect-killed trees. Specific requirements include leaving 4 snags per acre and retaining an average of 4 largest down logs per acre. Protection of paved roads with protective pads and video recording prior to operations is mandatory.

• Mandatory Item 2 & 2.1 (Roadside Hazard/Sanitation Trees): Cut and remove live and dead trees within 100 feet of Tenmile Road (13S09) and Huckleberry Road (13S02, 13S52, 13S49) that meet high and moderate hazard criteria. Stumps are to be cut to 6 inches height for scenic integrity along these roads. Hazard trees in Special Management Zones (SMZs) are to be hand-felled away from trails and roads.

• Optional Item 3 (Thin from Below/Sanitize Plantations): Similar to Mandatory Item 1, but covers a larger acreage. Includes cutting and removing trees meeting minimum specifications, piling debris, leaving snags and down logs, and protecting leave trees.

• Optional Item 4 (Piling of Material in Units): Piling of remaining material over 10 inches DBH and 10 feet long, resulting in an average fuel loading of 10 tons per acre. Piles are to be constructed in a "teepee" or pile-shape, at least 6 feet tall, with a 3-foot fire line cleared to mineral soil. Specific limitations on pile location relative to private property and live trees are included.

• Optional Item 5 (Biomass Removal): Subsidized removal of surplus or excess timber products by rail. Specific requirements for debarking logs transported outside of ecological bug/pest zones are detailed.

• Protection of leave trees is a high priority; no more than four damaged trees per acre are permitted. Exceeding this limit incurs a $50.00 charge per additional damaged tree.

• Work quality is assessed through informal visual inspections and formal verification plots. Minimum Acceptable Quality Levels (AQLs) are specified for each item (e.g., 90% for Item 1, 100% for Item 1.1).

• Specific procedures for inspection, including fixed radius plots and mechanical piling inspections, are outlined.

• Unsatisfactory performance (below 85% AQL) can lead to rework orders, reduced payment, or contract termination.

The document specifies work items across various units within the Hume Basin, Sequoia National Forest, Hume Lake Ranger District. Specific dates for operations are subject to timing restrictions and Limited Operating Periods (LOPs) detailed in Appendix B.

• Environmental Compliance: Contractor must comply with all Federal, State, and local environmental quality laws.
• Timing Restrictions: Work is subject to LOPs, fire risk, active raptor nest seasons, soil moisture conditions, and snow depth.
• Cultural Resources: Discovery of cultural or archeological sites will suspend work in the immediate vicinity.
• Road Protection: Tracked equipment must use protective pads on paved roads. Damage to roads must be reported within 24 hours.
• Herbicide Application: Specific procedures for treating cut stumps with borate compound are detailed, requiring Forest Service approval and daily logs.
• Definitions: A comprehensive list of definitions for terms used in the document is provided.

Combined Synopsis/Solicitation

This document is a combined synopsis and solicitation for commercial services, issued in accordance with FAR 12. It serves as the sole solicitation, and a separate written solicitation will not be issued. The services required include cutting and removing timber, removing hazard trees near roads and recreation infrastructure, piling slash within units, and removing biomass material. Simplified acquisition procedures are being used.

• Mandatory Work Activities:

  • Cut and Remove Included Timber (Thin from Below): 261 Acres
  • Cut and Remove Included Timber (Rec Residence Unit 143): 77 Acres
  • Cut and Remove Included Timber (Roadside Hazard Trees - Tenmile Road): 144 Acres
  • Cut and Remove Included Timber (Roadside Hazard Trees - Huckleberry Road): 118 Acres

• Optional Work Activities:

  • Cut and Remove Included Timber (Thin from Below - Plantations): 1402 Acres
  • Piling of Material in Units (Biomass Removal): 2002 Acres
  • Haul of Timber Subject to Agreement Products: 26,426 Tons

• Contract Type: Firm-Fixed Price (FFP)

• Period of Performance: Date of Award through March 1, 2029

• Anticipated Award Date: March 2026

• NAICS Code: 115310 - Fuels Management Services (Size Standard: $34 Million)

• Product Service Code: F099

• Proposal Submission: Submit technical and price proposals separately via email to mark.phillipp@usda.gov and Joshua.bahling@usda.gov.

• Proposal Validity: Proposals must be valid for 60 days after receipt.

• Evaluation Criteria: Proposals will be evaluated based on Technical Approach, Relevant Past Performance, Utilization of Local Work Forces/Benefit to Local Community, and Cost/Price. Technical Approach is significantly more important than Past Performance, which is significantly more important than Local Community Benefit. Technical factors combined are approximately equal to cost or price.

• Key Deadlines:

  • Posted Date: 01/27/2026
  • Response Date: 03/02/2026

• Post Award Conference: Scheduled within 10 days after award at Hume Lake Ranger District.

• Set Aside: None

• Registration: Offerors must be actively registered in the System for Award Management (SAM.gov) to be eligible for award.

• Timber and product removal quantities are estimates and not guaranteed; contractors are urged to examine the contract areas.

• Hauling costs have been removed from the timber appraisal.

• Specific protection measures for plants, animals, cultural resources, and cave resources are detailed, including restrictions for certain areas (e.g., California Spotted Owl PACs, Goshawk PACs, Riparian Conservation Areas).

• Fire prevention and control measures are detailed, with a fire period from April 1 to October 31.

• Attachments include Technical Specifications, Timber Removal Specifications, Road Maintenance Specs, Maps, and Wage Determination.

Form / Attachment / Pricing Sheet

This document, Appendix B - Scaled, provides detailed specifications and conditions for timber removal under a Stewardship Contract. It outlines the technical requirements, operational procedures, and contractual obligations for bidders.

• Timber Specifications: Details on included timber, utilization standards, and designations (clearcutting, overstory/understory removal, individual trees).
• Rates of Payment: Information on current contract rates, other payment rates, and how timber is valued.
• Payments: Procedures for cash deposits, integrated resource accounts, and refunds.
• Transportation Facilities: Requirements for constructing and maintaining roads.
• Operations: Guidelines for felling, bucking, skidding, yarding, scaling, and safety.
• Other Conditions: Includes title and liability, modification for catastrophe, and sale of other materials.
• Cutting Unit Boundaries: Methods for designating and marking cutting unit boundaries (marked, discernable, geo-fence).
• Fire Precautions: Specific requirements for fire prevention and suppression equipment, Project Activity Levels (PAL), and emergency procedures.

This appendix is crucial for bidders as it defines the technical and operational framework of the timber removal contract. It details the types of timber to be removed, how it will be measured and paid for, the required operational standards, and critical safety and environmental considerations, including fire precautions. Understanding these specifications is essential for accurate bidding and successful contract execution.

Forms / Attachments / Pricing Sheets

This document, Appendix C, details the "ROAD MAINTENANCE REQUIREMENTS" for the Hume Basin Stewardship IRSC project. It outlines specific technical specifications (T-SPEC) for various road maintenance tasks, categorized by "PRE HAUL", "DURING HAUL", and "POST HAUL" phases. It also defines various road structure terms and provides detailed specifications for each maintenance task.

• Road Maintenance Requirements Summary: Tables detailing specific roads, their termini, mileage, and the required "ROAD MAINTENANCE T-SPECIFICATIONS" for pre-haul, during-haul, and post-haul periods. These specifications are indicated by codes (e.g., T-800, T-802).
• T-SPECIFICATIONS: A list of road maintenance specifications with their corresponding titles, including:
  • T-800: Definitions
  • T-801: Slide and Slump Repair
  • T-802: Ditch Cleaning
  • T-803: Surface Blading
  • T-804: Surfacing Repair
  • T-805: Drainage Structures
  • T-806: Dust Abatement
  • T-807: Roadway Vegetation
  • T-808: Miscellaneous Structures
  • T-809: Waterbars
  • T-810: Barriers
  • T-811: Surface Treatment
  • T-814: Drainage Excavation
  • T-815: Culvert Installation
• Definitions: Detailed explanations of terms used in the specifications (e.g., Roadway, Subgrade, Traveled Way).
• Illustrations: Diagrams illustrating road structure terms and specific features like Rock Barriers and Earthen Berms.
• Notes: Clarifications on performance items, optional items, road types, and abbreviations.

This appendix is crucial for bidders as it defines the specific technical requirements and standards for road maintenance that will be expected under the contract. Understanding these specifications is essential for accurately estimating costs, developing a technical approach, and ensuring compliance with contract obligations. Bidders must review these detailed requirements to assess their capability to perform the specified road maintenance tasks.

Form / Attachment / Pricing Sheet

This document is Contract Area Map 1 of 2 for the Hume Basin Stewardship IRSC, located within the Sequoia National Forest, Hume Lake Ranger District. It visually delineates the contract area, treatment units, and various features relevant to the stewardship contract.

• Legend: Defines symbols and patterns used on the map, including treatment unit numbers, contract area boundaries, plantation units, hazard tree units, roads, recreation sites, and special management areas (e.g., Riparian Conservation Areas, Giant Sequoia Groves).
• Contract Item Table: Lists specific contract items (e.g., Mandatory Item 2, Optional Item 3) and the corresponding cutting units, along with required actions (e.g., Fell, SEPM, TRAC) and associated contract clauses.
• Requirement Explanation: Provides definitions and references for abbreviations and terms used in the contract item table (e.g., DF for Directional Felling, LOP3 for Limited Operating Period March 1-June 30).
• Map Area: Displays the geographical layout of the contract area with numbered treatment units, roads, water features, and other relevant landmarks.
• Vicinity Map: Shows the general location of the contract area relative to nearby towns and national parks.

This map is crucial for bidders to understand the physical scope and location of the work. It helps in visualizing the treatment units, understanding the types of activities required in each unit (based on the legend and contract item table), and identifying any specific restrictions or features like Limited Operating Periods (LOPs) or Riparian Conservation Areas that will impact operations and planning.

Form / Attachment / Pricing Sheet

This document is Contract Area Map 2 of 2 for the Hume Basin Stewardship IRSC (Integrated Resource Service Contract) on the Sequoia National Forest, Hume Lake Ranger District. It visually depicts the contract area, treatment units, and various features relevant to the contract.

• Legend: Defines symbols and abbreviations used on the map, including treatment unit numbers, contract area boundaries, plantation units, hazard tree units, roads, recreation sites, riparian conservation areas, and other land designations.
• Map Area: Shows the geographical extent of the contract area with detailed topographical and feature information.
• Vicinity Map: Provides a broader geographical context of the contract area within the surrounding region.
• Requirement Explanation Table: Links contract items and requirements (e.g., Mandatory Item 2, Optional Item 3) to specific actions and explanations (e.g., Directional Felling, Designation by Damage Class, Limited Operating Periods, Scattering of Slash).

This map is crucial for bidders to understand the physical location and boundaries of the work to be performed under the Hume Basin Stewardship IRSC. It visually clarifies the specific areas designated for treatment, the types of units involved (e.g., plantation, hazard tree), and the presence of sensitive areas like riparian zones and recreation sites. The accompanying table directly links map features and unit designations to specific contract requirements and operational constraints, such as felling methods and limited operating periods, which are essential for accurate proposal development and bid pricing.

Other / Unclassified

This document is a U.S. Department of Labor Wage Determination (No. 1977-0727, Revision No. 79) for service contracts related to forestry, land management, cleaning of public use areas, and timber inventory services in California Statewide. It lists various occupation codes and their corresponding minimum hourly wage rates.

This wage determination establishes the minimum wages and fringe benefits that must be paid to employees performing work under a contract covered by this determination. Bidders must use this information to accurately calculate labor costs for their proposals. Key details include:

• Occupational Wages: Specific hourly rates are provided for occupations such as Brush/Precommercial Thinner, Choker Setter, Forestry Technician, and Tree Planter, Mechanical.
• Fringe Benefits: Standard fringe benefits include Health & Welfare ($5.55/hour or $222.00/week) and specific provisions for Paid Sick Leave under Executive Order 13706.
• Vacation and Holidays: Details on paid vacation (2-4 weeks based on service years) and a minimum of eleven paid holidays are outlined.
• Uniform Allowance: Requirements for providing uniforms or reimbursing employees for their cost and maintenance are specified.
• Conformance Process: Procedures for requesting authorization of additional classifications and wage rates not listed in this determination are described, including the use of Standard Form 1444 (SF-1444).