HX: 4.00 Inch SCH 120 Pipe

Form / Attachment / Pricing Sheet

This document, titled "INDIVIDUAL REPAIR PART ORDERING DATA," provides specific requirements for ordering a repair part, identified as "PIPE, 4.0" NOM" with National Stock Number 1H 4710-01-029-1095.

• Item: Pipe, 4.0" Nominal, Schedule 120, Type 2 or 3, Class 4, Finish A, B, or E, made of 304 CRES (Corrosion Resistant Steel), seamless.
• Material Requirements: Must comply with MIL-DTL-23226 CL 4, Material Designator SA.
• Manufacturing & Process Requirements: Includes specific cleanliness requirements and dimensional specifications (4.5 inch OD, 0.438 inch wall thickness, 12 ft. length). It also states the item shall not contain or be contaminated by mercury.
• Quality Assurance: Requires an inspection system meeting ISO 9003, ISO 9002, ISO 9001, or MIL-I-45208 standards, along with specific supplements. Procedures for alloy identity testing and ultrasonic inspection are required prior to manufacture.
• Preparation for Delivery: Mandates marking and labeling in accordance with MIL-STD-129, including bar code marking suitable for hand scanning, and requires the manufacturer's CAGE code and part number on unit packs.
• Contract Data Requirements: Outlines required submittals, including procedures and reports such as Certification of Quality Conformance and Objective Quality Evidence Reports.

This document details the technical specifications, material requirements, quality assurance provisions, and delivery instructions for a specific repair part. Bidders must ensure their product and processes meet all listed specifications and requirements to be considered compliant. It also specifies the necessary documentation and reports required for submission.

Form / Attachment / Pricing Sheet

This document, "Attachment (1) TECHNICAL ORDERING DATA (TOD)", provides detailed specifications and requirements for the procurement of "Pipe Metallic 4IN" under Contract No. N0010426RX19754.

• Item: Pipe Metallic 4IN
• Quantity: 960 inches (80 feet)
• Special Characteristics: NPS 4 INCH, SCHEDULE 120, Seamless, LEVEL 1.
• Manufacturing Standard: MIL-DTL-23226, with specific modifications outlined.
• Material Specifications: Composition 304, Type 1, 2, or 3, Class IV, Finish (A), (B), (C), or (E). If Type 1, Argon-Oxygen-Decarburization (AOD) or Vacuum-Oxygen-Decarburization (VOD) process required.
• Testing Requirements: Ultrasonic inspection per MIL-DTL-23226 and MIL-STD-2132. Vendor must provide four (4) weeks advance notice for ultrasonic testing witness.
• Applicable Documents: Includes MIL-DTL-23226J, MIL-STD-792F, MIL-STD-129R, ASTM D3951-18, and MIL-STD-2132F.
• Data Requirements: Material Certification, Procedure Approvals (Ultrasonic, Liquid Penetrant, Alloy Identity Test), and Cleanliness Requirements.
• Marking: Permanent marking on each end with specific information as per MIL-STD-792.
• Preservation/Packaging: In accordance with ASTM D3951 and MIL-DTL-23226, using wooden boxes.
• Inspection: Government inspection is required prior to shipment.

This document is critical for bidders to understand the precise technical specifications, material requirements, testing procedures, marking, packaging, and inspection criteria for the specified pipe. Adherence to these detailed requirements is essential for proposal preparation and successful contract execution.

Form / Attachment / Pricing Sheet

This document, "Attachment (1) to Exhibit A: Additional DD1423 Information," outlines the specific requirements for material certifications and procedure approvals for the "Pipe Metallic 4IN" item under Contract No. N0010426RX19754. It details the types of certifications required, how they should be submitted, and the information they must contain.

• Procedure Approvals: Vendor procedures requiring approval must be submitted to Portsmouth Naval Shipyard (PNSY) prior to performing applicable tests.
• Material Certifications: Certifications for tests, inspections, and examinations must accompany each shipment.
  • Certificate of Compliance: Must include a specific statement attesting to the actual attributes of furnished items and full compliance with contract requirements, signed by the Quality Assurance Official.
  • Chemical and Mechanical Properties: Requires photostatic copies of certifications from the test facility, detailing results for each sample. If properties are altered by processes like heat treatment, the original data must be annotated.
  • Seamless Certification: A statement confirming the material is seamless is required if applicable.
• Traceability: Certifications must include material identification, contract number, and heat/lot or vendor traceability numbers.
• Sample Certificate of Compliance: A template is provided at the end of the attachment.

Bidders must understand these certification requirements to ensure their material submittals meet contract specifications. Failure to provide accurate and complete certifications as outlined in this attachment could impact proposal evaluation or contract fulfillment. The document specifies the format and content for various reports, including chemical analysis, mechanical properties, and compliance statements, which are critical for quality assurance and traceability.

Form / Attachment / Pricing Sheet

This document outlines the Operations Security (OPSEC) contract requirements for contractors performing work at Portsmouth Naval Shipyard (PNSY). It defines OPSEC, the requirement for an OPSEC Plan, and the contractor's responsibilities regarding the protection of Critical Information and Indicators (CII).

• OPSEC Definition: A process to protect sensitive information from exploitation.
• Critical Information and Indicators (CII): Defined as information needing protection from unauthorized disclosure, whether classified or unclassified.
• OPSEC Plan Requirement: Contractors may be required to submit an OPSEC Plan, signed by the Prime contractor, prior to the contract award or availability start date. The need for a plan is determined by the OPSEC PM or Designated Representative, or based on the installation work.
• Contractor Responsibility: Contractors must avoid inadvertent disclosure of CII or sensitive information. This includes protecting information from unauthorized third parties, foreign governments, and entities under Foreign Ownership, Control or Influence (FOCI).
• Prohibited Disclosures: CII must not be publicized on company websites, newsletters, or social media. Transmission to personal email accounts and media requests must be handled appropriately.
• Consequences of Compromise: Disclosure of CII to unauthorized persons may lead to removal from assignment, contract termination, criminal prosecution, and civil penalties.
• Controlled Unclassified Information (CUI): Contractors must protect CUI and report any attempts by unauthorized parties to solicit or obtain it.
• Portable Electronic Device (PED) Policy: Details restrictions and requirements for the use of PEDs, which have the capability to record, store, or transmit data. Use of PEDs requires coordination with the sponsor and adherence to Shipyard guidance.
• Examples of CII: Includes Personally Identifiable Information (PII), discussions about shipyard work, schedules, equipment capabilities, critical infrastructure, and photographs/videos within work areas.
• Examples of Countermeasures: Includes not posting classified or CUI online, shredding sensitive information, not posting shipyard information on social media, removing badges when leaving the shipyard, and reporting unauthorized disclosures.

This document is crucial for bidders to understand the security and information protection requirements that will be imposed during contract performance. It highlights the importance of OPSEC, the handling of sensitive information, and the restrictions on electronic devices, which may impact operational procedures and personnel conduct. Bidders should assess their ability to comply with these stringent requirements.

Form / Attachment / Pricing Sheet

This document, Exhibit A, lists Contract Data Requirements. It specifies various data items that are required as part of the contract, including their titles, authorities, distribution, and submission requirements.

• Data Item A001: Material Certification, requiring submission of technical ordering data attachment procedures.
• Data Item A002: Procedure Approvals, also referencing technical ordering data attachment procedures.
• Block 6: Specifies testing procedures required, including Ultrasonic Test Procedure and Liquid Penetrant Test Procedure (135T), and Alloy Identity Test Procedure (134).
• Distribution: Outlines how data copies (Draft, Final, Registered, Reproduced) are to be handled.

This exhibit details specific documentation and procedural requirements that bidders must be prepared to provide or adhere to as part of the contract. It highlights the need for specific certifications and the submission of technical data related to procedures and testing.