J--SJC RIO CHAMA TRAIL STAIRCASE

Form / Attachment / Pricing Sheet

This document contains detailed architectural and engineering drawings for the "New Staircase Installation" project at the Rio Chama Trail, Heron Reservoir Recreation Area. It serves as a guide for construction and installation of a new steel staircase and associated components.

• Sheet 1: Location map, site plan, and kiosk details.
• Sheets 2-5: Detailed plans, elevations, and sections of the new staircase, including upper, middle, and lower landings, handrailing, and baluster panels.
• Sheet 6: Details for lower landing support posts and connections to existing foundations.
• Sheet 7: Upper landing frame and grating plans, and various section details.
• Sheet 8: Staircase front and side elevations, and typical section of entrance hand railing.
• Estimated Quantities: A list of materials and their estimated quantities required for the project.
• Notes: Specific instructions, requirements, and references to existing conditions and standards.

This document is critical for bidders to understand the full scope of work, material requirements, and construction details for the new staircase and kiosk installation. It provides the technical specifications necessary for accurate bidding and project execution.

Form / Attachment / Pricing Sheet

This document contains "As-Builts" for the BOR Rio Chama Trail Staircase, providing detailed plans and specifications for the construction of a footbridge and associated stairs across the Rio Chama.

• Sheet 1: Location map showing the trail and footbridge across the Rio Chama, with coordinates and reference to U.S.B.R. drawing.
• Sheet 2: Site plan illustrating the trail layout, parking areas, and access points near Heron Dam.
• Sheet 3: Index to drawings and a general overview of the "Chama Footbridge."
• Sheet 4: Site layout plan and profile of the Chama Footbridge, detailing abutment locations and elevations.
• Sheet 5: Details for cables, including connection types, dimensions, and turnbuckle specifications.
• Sheet 6: Details for the single-bay layout of the footbridge, including hardware and wood notes.
• Sheet 7: Details for abutments, including cross-sections, rebar schedules, and construction notes.
• Sheets 8-10: Details for the "Chama River Stairs," including layout, anchor bolt and foundation plans, beam framing, elevations, longitudinal sections, and material specifications (concrete, reinforcing bars, wood, hardware).

This document provides the technical drawings and specifications necessary for understanding the scope and requirements for the construction or renovation of the Rio Chama Trail Staircase and Footbridge. Bidders will need to review these detailed plans to prepare accurate proposals, understand material requirements, and plan construction methods.

Amendment / Modification

• Uploads structural drawings, information drawings, and photos as attachments.

• Adds the project magnitude, estimated to be between $100,000 and $250,000.

• Attachments (newly added).

• Project magnitude (previously unstated or different).

• Offers must be emailed to kristen_ruizjimenez@ios.doi.gov prior to the solicitation closing date and time.

• Questions or clarification requests are due no later than April 14, 2026, at 1600 Mountain Time, and must be submitted via email to Kristen Ruiz Jimenez at kristen_ruizjimenez@ios.doi.gov.

• The period of performance is now stated as 05/15/2026 to 07/31/2026.

Other / Unclassified

This document provides a project description for the SJC Rio Chama Trail Staircase replacement project. It outlines the purpose, authority, background, and specific tasks involved in replacing the existing mixed-material staircase and hand railing systems with new steel components. The project aims to extend service life, reduce maintenance, and comply with OSHA public access codes.

This document details the scope of work for replacing the Rio Chama Trail staircase and hand railing. Key tasks include:

• Attending a pre-construction meeting.
• Fabricating staircase and hand railing sections.
• Mobilizing to the project site.
• Removing existing hand railing and staircase sections.
• Inspecting existing concrete foundations.
• Installing new hand railing and staircase sections.
• Installing new kiosks.
• Removing the existing cableway bridge.
• Completing punch list items and site cleanup.

The document also includes a location map and photographs illustrating the existing site conditions, which will be crucial for bidders to understand the project's physical context and requirements.

Amendment / Modification

This amendment (0001) to Solicitation 140R4026R0012, effective 03/27/2026, serves to upload drawings as attachments to the solicitation.

• The primary change is the addition of "drawings set in the attachments."

• Offers must be emailed to kristen_ruizjimenez@ios.doi.gov prior to the solicitation closing date and time.

• Questions or clarification requests are due no later than April 14, 2026, at 1600 Mountain Time, and must be submitted via email to Kristen Ruiz Jimenez at kristen_ruizjimenez@ios.doi.gov.

• The period of performance is noted as 05/15/2026 to 07/31/2026.

Form / Attachment / Pricing Sheet

This document contains standard drawings and details related to concrete outline and reinforcement for Bureau of Reclamation projects. It serves as a reference for contractors and designers involved in construction or modification of structures, providing standardized specifications for concrete work and reinforcement placement.

• Abbreviations and Symbols: Defines common abbreviations and concrete symbols used in drawings.
• General Notes: Outlines requirements for concrete placement, dimensions, embedded materials, finishes, and joints.
• Reinforcement General Notes: Details requirements for bar supports, code references (ACI 318-19, ACI 350-20), cover, dimensions, placing, dowels, spacing, and splices.
• Standard Hook Details: Illustrates standard hook configurations for development of deformed bars in tension and for stirrups, ties, and hoops.
• Tables: Provides detailed tables for development length and lap splice length calculations based on concrete strength (f'c) and bar size (fy = 60,000 psi).
• Specific Details: Includes diagrams and notes for additional reinforcement around openings and recesses, typical offset details, typical corner details, and typical top of wall details.

This document is crucial for bidders to understand the specific standards and requirements for concrete work and reinforcement that will be applied to the opportunity. It informs the technical approach, material selection, and cost estimations for any construction or repair work involving concrete structures. Bidders must ensure their proposals and execution plans comply with these detailed specifications.

Form / Attachment / Pricing Sheet

This document is a Performance Bond (Standard Form 25) required for government contracts. It serves as a guarantee that the principal (the contractor) will fulfill the terms and conditions of the contract. The bond protects the government against financial loss if the contractor defaults.

• Principal: Information about the contractor, including legal name, business address, type of organization, and state of incorporation.
• Surety(ies): Information about the surety company or companies providing the bond, including name, address, state of incorporation, and liability limit.
• Penal Sum of Bond: The maximum amount the surety is obligated to pay if the contractor defaults.
• Obligation: Details the conditions under which the bond is void, primarily if the principal performs all contract obligations and pays required taxes.
• Witness: Signatures and seals of the principal and surety(ies).

Bidders need to understand that a performance bond will likely be required upon award of a contract. This form outlines the structure and information typically needed for such a bond. While this document itself is not part of the proposal submission, it indicates a requirement that will need to be met by the successful bidder. The penal sum will be a percentage of the contract value, and the surety's capacity to issue such a bond is crucial for contract performance.

Form / Attachment / Pricing Sheet

This document is Standard Form 25A, a Payment Bond. It is used to protect persons supplying labor and material for the prosecution of work provided for in a contract. The bond ensures that the Principal (contractor) and Surety(ies) are bound to the United States of America for the payment of the penal sum.

• Principal: Information about the contractor, including name, address, and type of organization.
• Surety(ies): Information about the surety company or companies providing the bond, including name, address, state of incorporation, and liability limit.
• Penal Sum of Bond: The total amount of the bond.
• Contract Date & Number: Identifies the contract to which the bond applies.
• Obligation: States the commitment of the Principal and Surety(ies) to the Government.
• Conditions: Outlines when the obligation is void (i.e., if the Principal makes prompt payment for labor and materials).
• Witness: Section for signatures of the Principal and Surety(ies).

Bidders may be required to provide this payment bond as part of their contract performance. This form outlines the information that needs to be completed by the contractor and their surety. It is crucial for understanding the financial guarantees required for contract fulfillment.

Solicitation / RFP / RFQ

This solicitation is for the SJC Rio Chama Trail Staircase project. The Bureau of Reclamation is procuring services to remove the existing Rio Chama Trail Staircase and Cableway Bridge, which were closed due to safety concerns. The project also includes replacing the staircase and hand railing panels with new low-maintenance steel.

• Removal of the existing Rio Chama Trail Staircase and Cableway Bridge.

• Fabrication and installation of a new staircase and hand railing panels using low-maintenance steel.

• Compliance with the attached Statement of Work (Attachment 1).

• Adherence to the Davis Bacon Wage Rate (NM20260011).

• Contract Type: Firm-Fixed Price.

• Period of Performance: Estimated to be from date of award (mid-May 2026) to July 31, 2026.

• The contract is set aside for Total Small Business.

• Proposals must be emailed to kristen_ruizjimenez@ios.doi.gov.

• Last day for Questions: Tuesday, April 14, 2026, by 4:00 PM (Mountain Time).

• Quotes Due: Monday, April 27, 2026, by 4:00 PM (Mountain Time).

• Evaluation will be based on Technical Specifications/Capability, Past Performance, and Price.

• This solicitation is set aside for Total Small Business.

• Attachment 1: Statement of Work

• Attachment 2: Price Schedule

• Attachment 3: Davis Bacon Wage Rate – NM20260011

• Attachment 4: Performance and Payment Bond Forms

• A site visit is scheduled for April 10, 2026, at 11:00 AM Mountain Time at the ENTRANCE TO THE RIO CHAMA TRAIL.

Statement of Work (SOW)

This Statement of Work (SOW) details the requirements for the fabrication and installation of a new staircase, handrailing, and entrance handrailing panels, as well as the removal of an existing staircase and cableway bridge at the Rio Chama Trail, San Juan-Chama Project, New Mexico.

• Site Visit: Prospective contractors must attend a pre-proposal site visit on Friday, April 10, 2026, at 11 AM MST. Contact Cord Everetts at (505) 462-3619 to make arrangements.

• Demolition: Removal and offsite disposal of the existing Rio Chama Trail staircase, handrailing, and cableway bridge. Existing concrete foundations must not be damaged during removal.

• Fabrication: Fabrication of a new staircase and new handrailing panels.

• Government Furnished Products (GFP): Contractors will pick up specified steel materials and hardware from the Chama Field Office for use in fabrication.

• Installation: Installation of the new staircase and handrailing, utilizing GFP and contractor-furnished materials for entrance handrailing. Installation of a new kiosk is also required.

• Site Restoration: Restoration of the site to pre-construction conditions, including revegetation of disturbed areas.

• Fabrication and installation of new staircase and handrailing.

• Removal and disposal of existing staircase and cableway bridge.

• Installation of a new kiosk.

• Adherence to safety and environmental regulations, including Reclamation Safety and Health Standards (RSHS).

• Submission of various plans (e.g., Demolition Plan, Safety Program, Waste Management Plan) as detailed in the specifications.

• Proposal due date information is referenced in "SOLICITATION, OFFER, AND AWARD," Standard Form 1442.

• Coordination with New Mexico State Parks and Reclamation’s Chama Field Office is required for access, water, and facilities.

• Strict adherence to safety protocols and environmental controls is mandated.

• Contractors must clean equipment before site entry to prevent invasive species.

• Government-furnished products must be inspected upon receipt, and any shortages or damages reported promptly.

Form / Attachment / Pricing Sheet

This document, "Attachment_2_-_SJCP_RCT_Staircase_SOW_Section_B.docx," outlines the Price Schedule A for the Rio Chama Trail Staircase and Hand Railings project. It details the supplies or services required, including fabrication, installation, demolition, and related preparatory work. Offers must be for the total of Price Schedule A; partial offers will be considered nonresponsive.

• CLIN 010: Fabricate & Install Staircase and Hand Railings
  • Mobilization and Preparatory Work
  • Surveying
  • Inspect and Pickup Government Furnished Products (GFP)
  • Fabricate Staircase and Hand Railings (using GFP)
  • Delivery and Install Staircase and Hand Railings
  • Install GFP and furnish necessary hardware
  • Furnish and Install Educational Kiosk
  • Final Grading and Seeding Disturbed Areas
  • Furnish and Place Structural Concrete for Foundation Improvements (if required)
• CLIN 020: Removal of Existing Staircase, Hand Railing, and Cableway Bridge
  • Demolition of existing Rio Chama Trail Cableway Bridge
  • Demolition of Existing Rio Chama Trail Staircase and Hand Railing Panels
• Warranted Characteristics: Minimum one-year warranty on workmanship (installation); manufacturer's warranties for kiosk, fabrication, and materials meeting industry standards.

Bidders must complete Price Schedule A in its entirety. This section provides the specific line items, estimated quantities, and units for which pricing is required. It defines the scope of work for both new construction and demolition, including the use of Government Furnished Products. Understanding these CLINs is crucial for accurate proposal preparation and cost estimation.

Form / Attachment / Pricing Sheet

This document is a General Decision for Heavy Construction Projects in New Mexico, specifically detailing prevailing wage rates for various trades. It serves as a reference for contractors to ensure compliance with labor standards on federal or federally funded construction projects.

• General Decision Number: NM20260011, dated 01/02/2026.
• State: New Mexico.
• Construction Type: Heavy.
• Counties Covered: Cibola, Colfax, Guadalupe, Harding, Los Alamos, McKinley, Mora, Quay, Rio Arriba, San Miguel, and Union Counties.
• Wage Rates: Lists specific hourly rates and fringe benefits for various trades including Electrician, Ironworker, Carpenter, Laborer (Common/General, Flagger), various Operators (Backhoe, Grader/Blade, Loader, Scraper), Plumber, Truck Driver (Dump, Water), and Welders.
• Geographic Zones: For Electricians, different zones are defined with varying rates based on mileage from specific towns.
• Executive Orders: Includes notes on Executive Order 13706 (Paid Sick Leave) and Executive Order 13658 (Minimum Wage for Federal Contractors), outlining contractor obligations.
• Identifiers: Explains various identifiers used in wage determinations (Union Rate, Union Average Rate, Survey Rate, State Adopted Rate).
• Appeals Process: Details the process for appealing wage determination decisions.

Bidders must use these prevailing wage rates to accurately calculate labor costs for their proposals on relevant construction opportunities. Compliance with these rates and associated Executive Orders is mandatory for federal contracts.

Form / Attachment / Pricing Sheet

This document provides standard and typical design details for concrete outlines and reinforcement, intended for use in conjunction with other related drawings (specifically 40-D-60003 and 40-D-60004). It serves as a reference for detailing reinforcement in concrete structures.

• Abbreviations: A comprehensive list of abbreviations used in the drawings.
• Concrete Symbols: Symbols indicating different concrete placements (e.g., first stage, second stage, blockout, precast, grout).
• General Notes: Detailed notes for designers and detailers regarding concrete placement, dimensions, finishes, joints, and embedded materials.
• Reinforcement General Notes: Guidance on bar supports, code references (ACI 318-19, ACI 350-20), cover requirements, bar placement, dowels, spacing, and splices.
• Standard Hooks: Diagrams and specifications for standard hooks for development and for stirrups, ties, and hoops.
• Tables: Detailed tables providing minimum lap splice lengths and development lengths for various bar sizes and concrete strengths (f'c) under different conditions (e.g., top bars, other bars, restricted/non-restricted member thickness).
• Typical Details: Illustrative details for offsets, corner conditions, recesses, and openings, including reinforcement requirements.

This document is crucial for bidders involved in concrete construction. It specifies the standards and requirements for reinforcement detailing, including material specifications, dimensions, and placement. Understanding these details is essential for accurate bidding, material procurement, and execution of concrete work according to Bureau of Reclamation standards.

Pre-Solicitation Notice

This notice is for informational and planning purposes only and is not a Request for Proposal (RFP). It serves to gather information for future procurement strategy. The government may use submitted information for planning. No feedback will be provided on submissions.

The Bureau of Reclamation requires the removal of the existing Rio Chama Trail Staircase and replacement with new, low-maintenance steel staircase and hand railing panels. A Cableway Bridge was also closed and has since been replaced.

• Removal of existing staircase.

• Installation of a new steel staircase and hand railing.

• Anticipated Period of Performance: May 12, 2026, through July 31, 2026.

• Anticipated Contract Type: Firm Fixed Price construction contract.

• This is not a solicitation, and responses are not offers. Not responding will not preclude future participation.

• Interested parties may voluntarily submit:

  • Company name and contact information (phone, email).
  • Contractor capability statement (related work experience).
  • DUNS number and CAGE code.
  • Business type (e.g., Service-Disabled Veteran-Owned small business).

• This procurement is 100% set-aside for Small Businesses.

• NAICS Code: 238190

• Size Standard: $19.0M

• The actual solicitation is anticipated to be posted on SAM.gov approximately 30 days from the date of this notice.

• Solicitation materials (RFQ Details, SOW, Drawings, Price Schedule, Contract Forms) will be electronic only on SAM.gov.

• Contractors MUST be registered in SAM.gov.

• Point of Contact for inquiries: Kristen Ruiz Jimenez at kristen_ruizjimenez@ios.doi.gov.

• Anticipated dates are for planning and subject to change.

Statement of Work (SOW) / Performance Work Statement (PWS)

This document outlines the work required for the San Juan-Chama Project, specifically the Rio Chama Trail Staircase replacement and associated demolition activities in Rio Arriba County, New Mexico.

• Demolition: Removal and offsite disposal of the existing Rio Chama Trail staircase, railing, and cableway bridge. Care must be taken not to damage existing concrete foundations during demolition.

• Fabrication: Fabrication of a new staircase and handrailing.

• Installation: Installation of the new staircase, handrailing, and a new kiosk. The kiosk location will be determined in the field.

• Government Furnished Products (GFP): Contractors will pick up specified metalwork and hardware from the Chama Field Office for use in fabrication and installation.

• Site Coordination: Coordination with New Mexico Park Service and Reclamation’s Chama Field Office is required for access, water, and facilities.

• Adherence to safety and health standards (Reclamation Safety and Health Standards - RSHS).

• Proper disposal of removed materials according to local requirements.

• Site restoration to pre-construction conditions.

• Compliance with environmental controls, including dust abatement and water pollution control.

• Location: Heron trailhead, Rio Chama Trail, Rio Arriba County, New Mexico.

• Pre-Proposal Site Visit: Friday, April 10, 2026, at 11 AM MST. Contact Cord Everetts at (505) 462-3619 to make arrangements.

• Safety: Strict adherence to safety and health standards is mandated, including site-specific safety programs and Job Hazard Analyses (JHAs).

• Environmental: Compliance with dust control, water pollution control, and oil spill prevention measures.

• Submittals: Various submittals are required, including demolition plans, safety programs, construction schedules, and as-built drawings.

• Government Furnished Products: Contractor is responsible for pickup, handling, and protection of GFP.

• Coordination: Close coordination with Government representatives and New Mexico State Parks is essential.