Lab A Electric Heat Install

Form / Attachment / Pricing Sheet

This document is Exhibit II, a Request for Proposal (RFP) form, and a Pricing/Evaluation Page for the Lab A Electric Heat Install project (RFP No. ISD-378581-RO). It requires bidders to provide their total firm fixed price for the project.

• Bidder Information: Fields for bidder name, business address, employer ID, and signature.
• Project Details: Specifies the project name as "Lab A Electric Heat Install" located at Fermi National Accelerator Laboratory (Fermilab) in Batavia, Illinois.
• Offer Acceptance Period: States the offer may be accepted for 90 calendar days.
• Pricing: Requires a breakdown of costs for the "Lab A Electric Heat Install" and a "Total Proposal" amount. The scope of work includes labor, equipment, transportation, overhead, bonding, safety, and supervision.
• Submission Deadline: Proposals are due by April 16, 2025, at 4:00 p.m. Local Prevailing Time.
• Submission Method: All proposals are to be sent electronically to ryanosul@fnal.gov.

This form is essential for bidders to formally submit their pricing proposal for the Lab A Electric Heat Install project. It outlines the required information, submission deadline, and method, and serves as the primary document for quoting the firm fixed price.

Statement of Work (SOW) / Performance Work Statement (PWS)

This SOW outlines the requirements for a turn-key project to electrify heating systems and upgrade electrical and control systems at three locations within the Fermi National Accelerator Laboratory (Fermilab): Neutrino Lab A (NLA), NLA-B, and NLC.

• Mobilization and Pre-Operational Requirements: Includes mobilizing to specified labs, executing Hazardous Energy Control (LOTO) on electrical and fluid systems, and performing/documenting 0-Volt verification. It also requires auditing and verifying panel schedules.

• Demolition and Site Remediation: Involves demolishing existing water lines and baseboard boiler lines, coordinating debris removal, and preparing the work area to a "ready state" by removing all debris, abandoned bolts, anchors, and supports.

• Mechanical and Electrical Installation: Requires furnishing and installing new heating units (electric baseboard and hanging heaters, or electric destratification fans) per attached drawings. Manufacturers like INDEECO or approved equivalents are specified. Installation must adhere to structural and electrical standards, including proper sizing of conduit, conductors, and breakers.

• Controls and Cybersecurity Integration: Mandates specialized subcontracting to Intelli-Building Controls LLC due to laboratory cybersecurity protocols. The contractor must supply all control-related wiring, thermostats, and hardware, ensuring full integration with existing lab infrastructure.

• Commissioning, Closeout, and Demobilization: Includes systems verification through final inspection and individual system checks, submission of O&M manuals and project paperwork, final site decontamination and cleaning, and a final project walk-through and site exit.

• Place of Performance: Fermi National Accelerator Laboratory (Fermilab) NLA/NLA-B/NLC, Batavia, IL 60510.

• Estimated Period of Performance: Start Date: 3/4/2026, End Date: 10/30/2026.

• Bid Submission Requirements: Proposals must include a sectional breakdown for detailed cost analysis, a cost-loaded CPM schedule, and location-specific pricing.

• Controls Subcontracting: Mandated to Intelli-Building Controls LLC.

• Manufacturer: INDEECO or approved equivalent for heating units and fans.

• Cybersecurity: Strict adherence to laboratory cybersecurity protocols is required.

• Notice to Proceed (NTP): Day 0

• Hazard Analysis, Bid Bond, Cost-loaded schedule: Day 10

• Product submittals and shop drawings reviewed: Day 31

• Construction complete (punch-list items remaining): Day 181

• Punch-list items complete: Day 211

• Closeout documentation submitted, final invoices paid: Day 241 (Project Complete)

Form / Attachment / Pricing Sheet

This document is a sample subcontract template for "General Electrical Service and Maintenance" between FERMIFORWARD and a Subcontractor. It outlines the terms and conditions for a subcontract issued under a prime contract with the U.S. Government (DOE) for the Fermi National Accelerator Laboratory (FNAL).

• Identification of Parties: Defines FERMIFORWARD and the Subcontractor.
• Prime Contract: Issued under DE-AC02-07CH11359.
• General Purpose: Furnishing management, supervision, personnel, materials, tools, transportation, and equipment for general electrical services and corrective maintenance on an as-needed basis.
• Period of Performance: Base period from November 1, 2025, to October 31, 2025.
• Order of Precedence: Specifies how inconsistencies will be resolved.
• Prices: Details the structure for supplies or services pricing, including Firm Fixed Prices (FFP) and Time and Materials (T&M).
• Indefinite Delivery / Indefinite Quantity (IDIQ): Describes the nature of the subcontract as IDIQ, with task orders issued as needed.
• Minimum/Maximum Value: States a minimum guaranteed value and a maximum total value for the subcontract.
• Reporting Requirements: References the Statement of Work for reporting details.
• Subcontract Administration: Identifies the Procurement Specialist and Technical Representative for administration and communication.
• Invoicing: Outlines procedures for submitting invoices, including electronic submission and required information.
• Payment Schedule: Based on individual tasks or releases.
• Construction Retainage: For construction work, a 10% retention applies until final completion.
• Closeout: Subcontractor assistance required for administrative closeout.
• Property: Details regarding FERMIFORWARD-furnished and Subcontractor-acquired property.
• Insurance: Requirements are detailed in Attachment J-2.
• Warranties: As described in Attachment J-fill in.
• Key Personnel: Identifies essential personnel who cannot be reassigned without approval.
• Limitation of FRA's Obligation: Outlines funding limitations and notification requirements.
• Incorporated Documents: Lists various attachments and documents that form part of the subcontract, including Terms and Conditions, Insurance Requirements, General Requirements, ES&H Requirements, Submittals, Quality Control Plan, Supplemental Engineering Specifications, and Statement of Work Templates.

This document serves as a template and provides a comprehensive overview of the contractual framework, scope of work, administrative procedures, and financial terms that would govern a subcontract for General Electrical Service and Maintenance. Bidders should review this document to understand the specific requirements, responsibilities, and contractual obligations associated with this type of subcontract, particularly regarding pricing, invoicing, reporting, and property management. The IDIQ structure indicates that work will be ordered through task orders, and bidders should note the minimum and maximum values and the process for proposing on individual task orders.

Form / Attachment / Pricing Sheet

This document, "Exhibit D - 010010 - General Requirements," outlines the general requirements for a construction project at Fermilab. It serves as a supplementary specification to the prime contract's general provisions and terms and conditions.

• Part 1 General: Covers purpose, summary, references, site location (Fermilab, Batavia, Illinois), description of work, materials/equipment furnished by FFDG (none anticipated), Buy American Act preference, services furnished by FFDG (electrical power, toilet facilities, utility locates), and items affecting work planning (no safety rep required, no additional training anticipated, metal recycling, waste disposal, reporting).
• Part 2 Mobilization and Pre-Operational Requirements: Details mobilization to Neutrino Lab A (NLA), execution of Hazardous Energy Control (LOTO), and 0-Volt verification.
• Part 3 Demolition and Site Remediation: Includes demolition of existing water and boiler lines, and remediation of work areas to a "ready state."
• Part 4 Mechanical and Electrical Installation: Covers furnishing and installing new electric baseboard and hanging heaters, and structural/electrical standards.
• Part 5 Controls and Cybersecurity Integration: Mandates specialized subcontracting for controls to Intelli-Building Controls LLC due to cybersecurity protocols, and requires contractor supply of control-related wiring, thermostats, and hardware.
• Part 6 Commissioning, Closeout, and Demobilization: Outlines systems verification, O&M manual submission, final demobilization, and site cleaning.
• Parts 7-15: Detail subsequent mobilization, demolition, mechanical/electrical installation, controls, commissioning, and specific site requirements like parking, staging, site access, hauling, temporary services, and Fermilab closure dates.
• Part 11 Material Substitutions: Defines the process and conditions for proposing equivalent products.
• Part 12 Documentation: Covers progress meeting minutes, quality control documentation, punch lists, and as-built record documents.
• Part 13 Subcontractor's Requests for Information (RFI): Outlines the procedure for submitting RFIs for clarification.
• Part 17 Execution: Details the Notice to Proceed (NTP), construction schedule milestones, quality control, and acceptance processes.
• Attachments: Includes Attachment A (Request for Information form) and Attachment B (QA/QC Punchlist Item Status form).

This document is crucial for bidders as it defines the comprehensive scope of work, site-specific requirements, safety protocols, documentation procedures, and acceptance criteria for the construction project at Fermilab. It details the tasks involved, including demolition, installation of heating units, and integration of control systems, as well as logistical aspects like site access, parking, and temporary services. Bidders must understand these requirements to accurately estimate costs, develop a project plan, and ensure compliance.

Solicitation / RFP / RFQ

This Request for Proposal (RFP) is for the "Lab A Electric Heat Install" project. The government is procuring services for the installation of electric heat systems, upgrading electrical components, and controls.

• Installation of electric heaters.

• Upgrading electrical systems and controls.

• Compliance with NFPA 70E standards for electrical installation.

• Subcontractor installing electrical conduit must have at least five (5) years of experience with voltages relevant to the project scope.

• Offerors must demonstrate at least ten (10) years of construction industry experience in the installation of electric heaters.

• The project includes several milestones, including hazard analysis, submittal of product and shop drawings, construction completion, punch-list completion, and final closeout documentation.

• This is a competitive Lowest Price Technically Acceptable (LPTA) procurement.

• The contract type will be a firm-fixed-price subcontract.

• The period of performance is defined by several milestones, with the project expected to be complete within approximately 270 calendar days from the Notice to Proceed.

• Proposals must be submitted in two parts: Part I - Technical Proposal and Part II - Business/Management Proposal.

• The Technical Proposal must include information on the offeror's experience, including at least ten (10) years in electric heater installation, NFPA 70E compliance, and specific experience for the conduit subcontractor.

• Key personnel (Project Manager, Project Superintendent, Safety Coordinator) must meet specific experience and training requirements.

• The proposal due date is April 16, 2026, by 4:00 PM CST.

• Evaluation will be based on the lowest evaluated price among technically acceptable proposals.

• This solicitation is a small business set-aside.

• The North American Industry Classification System (NAICS) code is 238220 (Plumbing, Heating and Air-Conditioning Contractors).

• The small business size standard for this NAICS code is $19.0 Million.

• A Pre-Proposal Meeting and Site Visit is scheduled for April 2, 2026.

• Offerors must submit questions in writing by April 9, 2026.

• A bid guarantee of not less than 20 percent is required.

• Payment and Performance Bonds are required for subcontracts exceeding $35,000 and $150,000 respectively.

• The Buy American Act requirements apply to construction materials.

Forms / Attachments / Pricing Sheets

This document contains the "Drawing List" and "Electrical Specifications" for the "LAB A ELECTRIC HEAT" project, Project No. 8-2-242. It serves as a reference for the various drawings included in the project and details the technical requirements for electrical installations.

• Drawing List: Provides a comprehensive list of all drawing sheets, including their titles and corresponding sheet numbers (e.g., Cover Sheet G-01, Mechanical Plans M-01 to M-03, Electrical Plans E-01 to E-02).
• Electrical Specifications: Outlines general requirements for electrical work, including:
  • Conduit types and installation (EMT, RGS)
  • Wiring standards (copper, THHN/THWN, minimum sizes)
  • Grounding conductor requirements
  • Use of listed or certified materials
  • Compliance with NEC and OSHA regulations
  • Labeling requirements for panels, circuits, and equipment
  • Safety procedures (lockout/tagout)
  • Receptacle specifications (type, rating, color, manufacturer)
  • Transformer and panel board specifications (e.g., TR-NL-5, PP-NL-5A, PP-AB-2B) with details on KVA, voltage, bus rating, breaker size, and manufacturer.

This document is crucial for bidders to understand the scope and technical requirements of the electrical components of the "LAB A ELECTRIC HEAT" project. It details the specific materials, installation methods, and equipment standards that must be adhered to, directly impacting proposal preparation and project execution.

Form / Attachment / Pricing Sheet

This document, "SECTION 230529 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT," details the specifications and requirements for metal strut support systems and associated components used in HVAC installations. It outlines performance requirements, materials, and execution guidelines for hangers and supports.

• Performance Requirements: Hangers and supports must withstand gravity loads and stresses according to ASCE/SEI 7, and be capable of supporting the combined operating weight of equipment and systems.
• Materials: Specifies carbon steel for struts (ASTM A1011/A1011M) and hot-dip galvanized steel for metallic coatings (ASTM A123). Threaded rods are to be continuously threaded, zinc-plated or galvanized for indoor use, and stainless steel for outdoor use.
• Strut Support Systems: Describes factory-fabricated pipe-support assemblies including steel channels, vertical metal support rods, and accessories. Lists approved manufacturers such as Atkore Unistrut and Cooper B-line.
• Execution: Details requirements for attaching supports to structural steel, installation in accordance with manufacturer instructions, and proper adjustment of hangers. It also specifies the types of building attachments to be used, including various C-clamps and brackets (e.g., MSS Type 19, 20, 21, 23, 25, 27, 28, 29, 30, 34, 57).

This document is crucial for bidders to understand the specific technical requirements for HVAC support systems. It defines the quality of materials, structural performance expectations, and installation methods, which will directly impact material sourcing, product selection, and installation labor costs. Bidders must ensure their proposed solutions and pricing align with these detailed specifications.

Form / Attachment / Pricing Sheet

This document, "Exhibit E - 013100_ESH_Requirements.pdf", outlines the Environment, Safety, and Health (ES&H) requirements for subcontractors working at Fermi National Accelerator Laboratory (Fermilab), managed by Fermi Forward Discovery Group, LLC (FFDG).

• General ES&H Policy: FFDG's commitment to protecting the environment, safety, and health of all personnel on site.
• Applicable Codes and Regulations: Compliance with federal, state, and local regulations, including specific DOE orders and standards (e.g., 10 CFR 851, 10 CFR 835, OSHA standards).
• Subcontractor Requirements: Detailed requirements for pre-award and post-award submittals, including ES&H plans, safety questionnaires, and training records.
• Specific Hazard Areas: Comprehensive coverage of potential hazards and required controls, including but not limited to:
  • Excavation and Confined Space Entry
  • Fall Protection
  • Hazardous Materials
  • Electrical Safety
  • Radiation Protection
  • Fire Protection
  • Lasers
  • Industrial Hygiene (Noise, Lead, Silica, etc.)
  • Waste Disposal and Recycling
• Work Planning and Permits: Requirements for Job Hazard Analyses (HAs), permits (Excavation, Hot Work, Confined Space), and daily/weekly work planning meetings.
• Emergency Procedures: Protocols for incident reporting, investigations, emergency egress, and severe weather.
• Attachments: Includes guidance on Silica, Daily Work Planning, Construction ES&H Certification (CESHC), and Hazard Analysis.

This document is critical for any potential bidder to understand the stringent ES&H requirements and compliance obligations for performing work at Fermilab. It details the expected safety protocols, training, documentation, and hazard mitigation strategies that must be implemented. Bidders must ensure their proposed approach and capabilities align with these requirements to be considered compliant and capable of executing the work safely and effectively.

Form / Attachment / Pricing Sheet

This document, "Exhibit F - 013300_Submittals_FermiForward.pdf," outlines the general methods and requirements for project work-related submittals. It details the procedures for submitting shop drawings, material samples, and operations/maintenance manuals.

• Purpose: To specify general methods and requirements for project work-related submittals.
• References: Cites "General Requirements" (010010) and "Environment, Safety, and Health Requirements" (013100).
• Shop Drawings, Material Samples, and Operations Maintenance Manuals: Subcontractors must submit these for materials and assemblies used on the project. Project schedules are to be submitted using the "Submittal for Review Transmittal" form (Attachment A).
• As-Built Drawings: Subcontractors must maintain a set of construction office prints, marking daily modifications. These marked-up prints are to be submitted upon completion of work.
• FFDG's Roles: Fermi Forward Discovery Group, LLC (FFDG) is the final judge of acceptability, and final acceptance of work is contingent on FFDG's approval of As-Built prints.
• Submittal Process: FFDG will review submittals within 10 working days, providing actions such as "No Exception Taken" (NET), "Revise & Resubmit – Fabrication May Proceed" (R/R), "Make Corrections & Proceed" (MCP), "Rejected" (R), or "For Information Only" (FIO).
• Material Substitutions: Procedures for submitting requests for equal or equivalent products are detailed, including requirements for explaining differences and indicating any necessary changes to drawings or specifications.
• Attachment A: Referenced as the "Submittal for Review Transmittal" form, which is provided as a separate document.

This document is crucial for bidders as it defines the mandatory procedures for submitting all required documentation, drawings, and materials throughout the project lifecycle. Understanding these submittal requirements, review processes, and timelines is essential for compliance and timely project progression. It also outlines the process for material substitutions and the requirements for As-Built drawings, impacting project execution and final closeout.

Form / Attachment / Pricing Sheet

This document, "Exhibit G - 014100_Quality_Requirements.pdf," outlines the quality requirements for subcontractors. It details the necessary quality control programs, plans, and procedures that must be implemented to ensure work meets contract specifications and industry standards. It also provides guidance for subcontractors who may not have their own Corporate Quality Assurance Plan.

• Corporate Quality Assurance Plan: Subcontractors must submit their own plan or use the provided template (Appendix C). This plan should cover purpose, roles, scope, organizational chart, requirements verification, document control, submittals/procurement, material/equipment control, turnover records, procedures, three phases of control, suspect/counterfeit items, nonconformance handling, lessons learned, continuous improvement, inspection/testing, definable features of work, and commissioning.
• Project Quality Control (PQC) Plan: To be submitted by the subcontractor within 10 days of award. It must detail personnel, procedures, controls, instructions, tests, records, and forms specific to the project. It needs to be updated for scope changes.
• Responsibilities: Outlines the responsibilities of the Project Quality Control Manager, including implementing the PQC Plan, interfacing with the Construction Management Office, maintaining records, attending meetings, assuring testing, and managing deficiency lists.
• Personnel Requirements: Specialized personnel may be required to assist the Project Quality Control Manager, and they must be physically present at the construction site.
• Acceptance: The PQC Plan requires acceptance prior to Notice to Proceed and is conditional on satisfactory performance.

This document is critical for bidders to understand the quality assurance and control expectations for the project. It specifies the required documentation (Corporate QA Plan, PQC Plan), the content of these plans, and the responsibilities of personnel involved in quality control. Bidders must ensure they can meet these requirements to prepare a compliant proposal and execute the work successfully.

Form / Attachment / Pricing Sheet

This document, "FFDG General Terms and Conditions for Construction (08/2025)", outlines the standard contractual terms and conditions that will govern construction subcontracts. It serves as a foundational document for any construction-related agreements entered into by FFDG.

• General Provisions: Definitions, scope of subcontract, independent contractor status, assignment, acceptance, and time is of the essence.
• Payment: Details on progress payments, breakdown requirements, and final payment conditions.
• Changes and Modifications: Procedures for change orders, equitable adjustments, and price breakdown for modifications.
• Indemnification and Liabilities: Subcontractor's responsibility for damages, theft, and warranties.
• Termination and Defaults: Conditions for termination for convenience or default, and non-waiver of defaults.
• Laws and Regulations: Compliance with federal, state, and local laws, and dispute resolution processes (step negotiations, mediation, binding arbitration).
• Insurance and Bonds: Requirements for insurance coverage and performance/payment bonds for subcontracts exceeding certain thresholds.
• Flow Down Provisions: Incorporation of FAR and DEAR clauses applicable to various subcontract values and types.

This document is critical for any bidder seeking to understand the contractual obligations, risks, and requirements associated with a construction subcontract under FFDG. It details payment terms, change order procedures, dispute resolution mechanisms, and essential compliance requirements such as insurance, bonds, and adherence to laws and regulations. Bidders should carefully review these terms to assess their ability to comply and to understand the framework of the subcontract.

Form / Attachment / Pricing Sheet

This document outlines the mandatory insurance requirements for construction subcontractors working at the Fermi National Accelerator Laboratory (Fermilab). It details the types of insurance, minimum coverage limits, and specific conditions that subcontractors must meet before commencing work.

• General Liability: Requires Commercial General Liability with specific limits for each occurrence and aggregate, including products-completed operations aggregate.
• Automobile Liability: Mandates combined single limit coverage for owned, non-owned, and hired vehicles.
• Excess Liability: Specifies limits for excess liability coverage.
• Workers' Compensation & Employer's Liability: Outlines statutory limits for workers' compensation and employer's liability.
• Contractor's Pollution Liability: Details per-occurrence/per-claim limits and an annual aggregate, with specific requirements for claims-made policies.
• Contractor's Professional Liability: Requires coverage for design/build or construction management services.
• Supplemental Coverages: May require Aircraft Liability, Builder's Risk (Special Form), and Broad Form Cargo insurance, depending on the scope of work.
• Additional Insureds: Requires naming Fermi Forward Discovery Group, LLC, the University of Chicago, Universities Research Association, Inc., and the U.S. Government as additional insureds on most policies.
• Evidence of Insurance: Subcontractors must provide certificates of compliance within ten days of subcontract signing and may be required to provide certified copies of policies.

This document is critical for any potential bidder involved in construction work at Fermilab. It directly impacts the cost and feasibility of undertaking the subcontract, as it specifies the insurance coverage that must be obtained and maintained. Bidders must review these requirements carefully to ensure they can comply before submitting a proposal or bid.

Form / Attachment / Pricing Sheet

This document is a Bid Bond (Standard Form 24, Rev. 10/2023, Fermiforward Form FL-41, 1/7/2025), which is required when a bid guarantee is necessary for an opportunity. It serves as a guarantee that the principal will execute further contractual documents and provide required bonds if their bid is accepted.

• Principal: Information about the bidder submitting the bond.
• Surety(ies): Information about the surety or sureties providing the bond.
• Penal Sum of Bond: The maximum dollar amount the bond will cover, expressed as a percentage of the bid price or a specific dollar amount.
• Bid Identification: Details linking the bond to a specific bid, including Bid Date and Invitation Number.
• Obligation: Outlines the conditions under which the bond is void (e.g., successful execution of contract documents) or the principal's liability.
• Conditions: Specifies the principal's submission of the bid.
• Execution: Sections for signatures, names, titles, and seals of the Principal and Surety(ies).

Bidders must complete and submit this form as part of their bid package if a bid guarantee is required. It ensures the bidder's commitment to proceed with the contract if awarded. Failure to provide a properly executed bid bond may result in disqualification. The bond amount should be calculated based on the bid price as specified in the instructions.

Form / Attachment / Pricing Sheet

This document is a Payment Bond (Standard Form 25A, Rev. 10/2023) authorized for use in connection with Fermi Forward Discovery Group, LLC subcontracts. It serves as a guarantee that the Principal will make prompt payment to all parties furnishing labor or materials for the prosecution of the work under the contract.

• Principal: Section to identify the legal name and business address of the primary party responsible for the contract.
• Surety(ies): Sections for identifying the name(s) and business address(es) of the surety or sureties providing the bond.
• Penal Sum of Bond: Field to specify the maximum liability of the surety.
• Obligation: Outlines the binding agreement of the Principal and Surety(ies) to the United States Government and Fermi Forward Discovery Group, LLC.
• Conditions: Details the circumstances under which the bond obligation is voided (i.e., prompt payment for labor and materials).
• Execution: Signature blocks for the Principal and Surety(ies), including spaces for corporate seals.

This form is a required attachment for certain subcontracts. Bidders may need to provide this bond as part of their subcontract agreement, ensuring they understand the requirements for identifying the Principal and Surety, specifying the penal sum, and executing the bond correctly. It guarantees payment for labor and materials, providing financial assurance to subcontractors and suppliers.

Form / Attachment / Pricing Sheet

This document is a Performance Bond (Standard Form 25, Rev. 10/2023, Fermi Forward Form FL-40) required for contracts with Fermi Forward Discovery Group, LLC. It serves as a guarantee that the Principal (the contractor) will fulfill the terms and conditions of the contract and pay applicable taxes imposed by the Government.

• Principal: Legal name and business address of the contractor.
• Surety(ies): Name(s) and business address(es) of the surety or sureties providing the bond.
• Penal Sum of Bond: The maximum liability of the surety.
• Contract Date & Number: Details of the contract the bond is associated with.
• Obligation: Outlines the conditions under which the bond is void (i.e., successful contract performance and tax payment).
• Execution: Spaces for signatures, names, titles, and seals of the Principal and Surety(ies).
• Bond Premium: Fields for Bond Premium, Rate Per Thousand, and Total.

Bidders must understand that a Performance Bond is required for this opportunity. This form outlines the specific information needed to complete the bond, including the Principal's and Surety's details, the penal sum, and contract information. Failure to provide a valid performance bond as required by the contract terms could result in disqualification or contract award issues.

Form / Attachment / Pricing Sheet

This document is Standard Form 1413, "Statement And Acknowledgment." It is used to document a subcontracting relationship, including the prime contractor, subcontractor, and the terms of the subcontract. It also acknowledges the inclusion of specific contract clauses within the subcontract.

• Part I - Statement of Prime Contractor: Details the prime contract number, date awarded, subcontractor information (name, address), and whether the prime contract includes the "Contract Work Hours and Safety Standards Act -- Overtime Compensation" clause.
• Part II - Acknowledgment Of Subcontractor: Lists the specific clauses of the prime contract that are included in the subcontract. These include various labor standards, compliance requirements, and certifications.

This form is relevant to bidders as it outlines the subcontracting structure and the flow-down of contract clauses from the prime contract to the subcontractor. Bidders, particularly those acting as subcontractors, need to understand which clauses are applicable to their work and ensure compliance. It also identifies the prime contractor and potentially the scope of work for the subcontractor.

Form / Attachment / Pricing Sheet

This document is a questionnaire for subcontractors to provide their injury and illness data to Fermilab. It is used to assess subcontractor safety performance.

• Company Name, NAICS code, Address, Phone Number, Owner
• Interstate experience modification rate for the past three consecutive years.
• Workers' Compensation Carrier information.
• OSHA 300 log data for the past three years, including:
  • Total Number of Recordable Cases (RC)
  • Total Recordable Case Rate (TRCR)
  • Total Number of Cases with Days Away, Restricted or Transferred (DART)
  • Days Away, Restricted or Transferred Case Rate (DARTR)
  • Employee Hours Worked (EHW)
  • Number of Fatalities
• Calculation of averaged recordable case rate and days away, restricted or transferred case rate over three years.
• Name and contact information for the individual responsible for safety.
• Safety training, qualifications, and certifications.

Potential bidders must complete and submit this questionnaire as part of their response to the opportunity. The data provided will be used to evaluate the bidder's safety record and compliance.

Form / Attachment / Pricing Sheet

This document, "Attachment C - Construction Environmental, Safety, & Health Certification (CESHC)", is a template required for all construction projects at DOE's Fermi National Accelerator Laboratory site (Fermilab). It is designed to help construction subcontractors describe project conditions and develop project-specific hazards and controls information. The CESHC is intended to be a living document, updated as project information changes.

• CESHC Template: A fillable form to document project conditions, hazards, and controls.
• 10 CFR 851 Acknowledgement: Subcontractors must acknowledge and comply with the Department of Energy's "Worker Safety and Health Program" requirements.
• Medical Surveillance and Qualification: Details requirements for employees working on-site, including occupational medicine, medical testing (e.g., hearing conservation, respirator use, substance abuse testing), and clinic information.
• Medical Facilities Map: Identifies five medical facilities near Fermilab and requires bidders to select or identify an alternate facility.

This attachment is crucial for any subcontractor bidding on construction projects at Fermilab. It outlines mandatory safety and health certifications, regulatory compliance (10 CFR 851), and medical surveillance requirements that must be addressed and submitted as part of the procurement process. Bidders must understand and plan for these requirements to ensure compliance.

Form / Attachment / Pricing Sheet

This document, titled "Subcontractor Annual Representations & Certifications (SARC)," is a form required for subcontractors. It collects essential business and certification information from offerors to ensure compliance with various government regulations and contract requirements.

• Offeror Information: Collects details such as Offeror Name, Parent Company Name, address, contact information, EIN/TIN, DUNS#, NAICS U.S. Industry #, and SAM.gov registration status.
• Business Category: Requires representation of ownership (U.S. Owned, Foreign Owned, etc.) and operating structure (Corporation, LLC, Partnership, etc.).
• Small Business Classifications: Allows offerors to self-certify as Large Business, Small Business, or Foreign Business, and to select applicable diversity categories (e.g., Woman-Owned, Veteran-Owned, HUBZone).
• Executive Compensation: Gathers information on the top five executives' names, titles, and compensation if certain federal funding thresholds are met.
• Offeror Responsibility: Includes representations regarding accounting system review, compliance with anti-trafficking laws, and employment eligibility verification (E-Verify).
• Export/Import Control Certifications: Requires agreement to comply with U.S. export control laws and regulations.
• Federal Acquisition Regulation (FAR) Certifications: Includes representations on limitations on pass-through charges for cost-reimbursement subcontracts.
• Certification: A final section for a duly authorized representative to certify the accuracy of all statements.

This form is critical for any potential subcontractor. Bidders must accurately complete and submit this SARC to demonstrate their eligibility, compliance, and business status as required by the prime contractor (Fermi Forward Discovery Group, LLC) and the U.S. Government. Failure to complete this form correctly may impact the ability to be considered for subcontract awards.

Form / Attachment / Pricing Sheet

This document, "Proposal Certifications," is a collection of required certifications and representations that offerors must complete and submit as part of their proposal package. It ensures compliance with various federal regulations and contract requirements.

• Certifications #1 (Required for all proposals ≥ $10,000): Includes sections on Export/Import Control, requiring information on the offeror's export compliance point of contact and representations regarding the nature of items furnished (e.g., military or space applications, dual-use items). It also incorporates the "Buy American – Construction Materials" clause (52.225-9), defining terms and outlining domestic preference requirements for construction materials.
• Certifications #2 (Required for all proposals ≥ $150,000): Covers Independent Price Determination (52.203-2), Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions (52.203-11), and Certification Regarding Responsibility Matters (52.209-5). It also includes clauses related to patent rights, technical data, computer software, and employment reports on veterans.
• Certifications #3 (Required for all proposals ≥ $550,000): Addresses Combatting Trafficking in Persons (52.222-50) and requires a Certification Regarding Trafficking in Persons Compliance Plan (52.222-56) for contracts with significant portions performed outside the U.S.
• Revision Table: Details the history of changes to the document, including updates to clauses, name changes, and corrections.

Offerors must carefully review and accurately complete all applicable sections of this document. Failure to provide complete and accurate certifications may impact proposal evaluation and the determination of responsibility. Specific attention should be paid to the Buy American Act provisions, export control requirements, and certifications related to pricing, lobbying, and trafficking in persons, as these can have significant implications for contract award.

Form / Attachment / Pricing Sheet

This document provides the General Decision Number IL20260008, Modification 1, which details the prevailing wage rates for various construction trades in specific Illinois counties. This is a modification to a previous general decision.

• Effective Date: January 9, 2026 (Modification 1).
• Supersedes: General Decision Number IL20250008.
• Applicable Counties: Du Page, Grundy, Kane, Kendall, Lake, McHenry, and Will Counties in Illinois.
• Construction Types: Building and Residential projects (excluding landscape projects).
• Trades Covered: Includes wage and fringe benefit rates for various trades such as Asbestos Worker, Boilermaker, Bricklayer, Carpenter, Electrician, Elevator Mechanic, Engineer (Power Equipment Operator), Ironworker, Laborer, Painter, Plasterer, Plumber, Roofer, Sprinkler Fitter, Sheet Metal Worker, and Truck Driver.
• Executive Orders: Notes applicability of Executive Order (EO) 13706 (Paid Sick Leave) and EO 13658 (Minimum Wage) for federal contractors.

Bidders must use these prevailing wage rates to accurately estimate labor costs for any construction work performed under this opportunity within the specified counties. Failure to comply with these wage requirements can lead to penalties. This document is crucial for developing a compliant and competitive bid.