LATCH, IMU DOLLY
Overview
Buyer
Place of Performance
NAICS
PSC
Set Aside
Original Source
Timeline
Qualification Details
Fit reasons
- NAICS alignment with historical contract wins in similar service areas.
- Scope strongly matches core technical capabilities and delivery model.
Risks
- Past performance thresholds may require one additional teaming partner.
- Potential clarification needed on staffing minimums before bid/no-bid.
Next steps
Validate eligibility requirements, assign capture owner, and schedule partner outreach to confirm teaming strategy before submission planning.
Quick Summary
The Department of the Navy / NAVSUP WEAPON SYSTEMS SUPPORT MECH has issued a Solicitation for the manufacture of a LATCH, IMU DOLLY. This opportunity is designated as a Total Small Business Set-Aside. The required item is a specific LATCH, IMU DOLLY (NAVSEA P/N: 5654186) made from 1-1/4 SQ BAR of L-P-410 NYLON, adhering to DRAWING 5654186 REV_1. Responses are due by July 13, 2026.
Scope of Work
This solicitation requires the manufacture of the LATCH, IMU DOLLY, specifically NAVSEA Part Number 5654186, with CAGE CODE 53711. The latch must be fabricated from a 1-1/4 inch square bar of L-P-410 Nylon material and must strictly conform to the regulations and specifications detailed in DRAWING 5654186 REV_1.
Key Requirements
- Manufacturing & Design: Adherence to material and physical requirements specified, particularly DRAWING 5654186 REV_1.
- Marking: Items must be marked in accordance with applicable Military Standards (MIL-STD-130, MIL-STD-1285, MIL-STD-454, MIL-P-15024/5) unless otherwise specified.
- Configuration Control: MIL-STD-973, Paragraph 5.4.8, applies. Contractors must submit Engineering Change Proposals, Requests for Deviations, and Requests for Waivers to the Contracting Officer at NAVICP-MECH.
- Quality Assurance: The Contractor is responsible for all inspection requirements, with GOVERNMENT SOURCE INSPECTION per FAR 52.246-2 REQUIRED. Inspection records must be maintained for 365 days post-delivery.
- Packaging: MIL-STD 2073 packaging requirements apply.
Contract & Timeline
- Type: Solicitation
- Set-Aside: Total Small Business Set-Aside (FAR 19.5)
- Product/Service Code: 5340 (Hardware)
- Response Due: July 13, 2026, 8:30 PM ET
- Published: June 11, 2026
Important Notes
- Drawings: To view or download drawings, visit www.sam.gov and enter the solicitation number.
- Delivery: Required within 90 days of award.
- Document References: Specific instructions are provided for obtaining various applicable documents, including those from DODSSP, commercial sources, and classified/NOFORN documents.
- Contact: For inquiries, contact AMANDA.R.HAYWARD.CIV@US.NAVY.MIL or 717-605-5834.