Library of Congress - Wayfinding Fabrication

Amendment / Modification

• The proposal due date has been extended.

• New Submission Deadline: 06-10-2026 12 PM ET EDT

• The deadline for submitting proposals or offers has been extended to June 10, 2026, at 12:00 PM Eastern Daylight Time.

Amendment / Modification

• This amendment clarifies the proposal due date.

• The proposal due date has been updated.

• The proposal due date is now June 5, 2027.

Amendment / Modification

This document, "Attachment J-8 - W-504 and W-505 Addendum 01 260520.pdf", appears to be an addendum or update related to drawings W-504 and W-505. The "VERSION DATE" indicates "05/20/26" with the description "Sheet Ref Updates".

• Drawings W-504 and W-505 are referenced, specifically concerning "M2 Exterior Monolith in Hard Landscape" and "M2 Exterior Monoliths in Soft Landscape" respectively.

This addendum is likely to impact fabrication tender documents by updating sheet references. Bidders should review these updates to ensure their proposals and fabrication plans align with the latest information.

Questions & Answers / Clarifications

This document provides responses to vendor questions regarding Solicitation 030ADV26R0030 for Wayfinding Signage Fabrication Services.

• Proposal Deadline: The proposal due date has been extended from May 27, 2026, to June 10, 2026.
• Budget: The Library is not sharing budget information at this time.
• Prototypes: Full prototypes, once approved, can be delivered and installed as the finished product.
• Mesh Surface: The mesh surface (floor-to-ceiling panel) is provided by the Library or another contractor and is not part of this solicitation.
• Paving Slabs: For M2 Exterior Monolith installations, the paving slabs sit on dirt/soil that can be excavated for a poured concrete foundation. The manufacturer will not be required to cut existing paving slabs.
• Pillar Dimensions: Contractors will need to take site measurements for pillar diameters; scale is indicated on Attachment J-1.
• Fixing Methods: Fixing Method A for banners is hand-operated. Two fixing options are presented in Attachment J-1, and offerors should price for either option.
• Graphics: Graphics will not be production-ready and will require substantial graphic preparation.
• Site Visit: The Library is not participating in site visits for this opportunity.

The primary impact is the extension of the proposal due date. Several questions clarified requirements related to materials, installation, and specific components, with some references to amended solicitation sections (C.3.7.1, C.3.7.2, C.3.7.4).

Statement of Work (SOW) / Performance Work Statement (PWS)

This Statement of Work (SOW) outlines the requirements for fabricating, delivering, and installing wayfinding signage throughout the Thomas Jefferson building at the Library of Congress.

• Fabrication: Create all new wayfinding elements according to design specifications and approved shop drawings.

• Delivery: Deliver fabricated signage to the specified site.

• Installation: Install designated new and existing wayfinding elements.

• Site Visits: Conduct site visits for measurements, meetings, and to review space requirements.

• Documentation: Generate shop drawings, engineering drawings, and a site conditions report.

• Project Management: Manage scheduling, site preparation, fabrication, and installation.

• Consultation: Collaborate with Library staff, the Applied Information Design contractor, the COR, and the Architect of the Capitol (AOC).

• All fabricated elements must adhere to the Wayfinding design and approved shop drawings.

• Detailed construction drawings for interior and exterior signage are required.

• Structural and electrical components must meet applicable codes, standards, and UL listings.

• A structural engineer must stamp all shop drawings for interior and exterior signage.

• An electrical engineer must review custom electrical systems.

• A final inspection by a licensed Structural Engineer and Electrical Inspector is required for exterior signage.

• The SOW covers fabrication, delivery, and installation of wayfinding signage within the Thomas Jefferson building.

• Exterior signage installation is an optional service.

• Materials: Specific materials and finishes are detailed for various sign types (e.g., aluminum sheet, acrylic, vinyl).

• Safety: Adherence to OSHA standards for tools, equipment, and scaffolding.

• Structural Integrity: All signage must meet structural safety requirements and building standards, including load considerations and potential impact on existing structures.

• Electrical: All electrical equipment must be UL listed and installed per manufacturer requirements.

• Submissions: Detailed drawings, material samples, prototypes, and an Operations Manual are required.

• Warranty: A 1-year warranty from the date of final acceptance is required for all work performed.

Amendment / Modification

This amendment (0001) to solicitation 030ADV26R0030 makes the following changes:

• Extends the proposal due date from May 27, 2026, to June 5, 2026.

• Revises the Statement of Work (SOW) in Section C based on vendor questions.

• Attaches the Questions & Answers (Q&A) document as Attachment J-9.

• Attaches revised documents W-504 and W-505 at Section J.

• Section C (Statement of Work)

• Section J (List of Attachments), with the addition of Attachment J-9 (Questions & Answers) and revised W-504 and W-505.

• The proposal submission deadline has been extended to June 5, 2026, 12 PM ET EDT.

Form / Attachment / Pricing Sheet

This document is a "Register of Wage Determinations" issued under the Service Contract Act by the U.S. Department of Labor, Employment Standards Administration, Wage and Hour Division. It provides the minimum wage rates and fringe benefits required for various occupations when performing contract work in the specified geographic areas (District of Columbia, Maryland, and Virginia).

• Lists numerous occupations with corresponding wage rates and footnotes.
• Includes specific wage determinations for various job titles, ranging from administrative support to technical and maintenance roles.
• Details fringe benefits, including Health & Welfare rates and paid sick leave provisions under Executive Orders 13706 and 13658.
• Outlines requirements for vacation and paid holidays.
• Provides guidance on the conformance process for unlisted classifications.

This document is critical for bidders to understand the minimum labor costs associated with performing services under a contract covered by the Service Contract Act in the specified regions. Bidders must ensure their proposed wages and fringe benefits meet or exceed these minimums to be compliant. It directly impacts the cost proposal and overall feasibility of bidding on opportunities requiring services in these areas.

Form / Attachment / Pricing Sheet

This document is a Past Performance Questionnaire designed to gather information on a contractor's suitability for providing services to the Library of Congress. It is critical for the proposal evaluation process.

• Contractor Information: To be filled in by the evaluator.
• Performance Ratings: Evaluators will use a defined scale (Outstanding, Good, Satisfactory, Marginal, Unsatisfactory, Not Applicable) to assess various aspects of the contractor's performance.
• Narrative Explanations: Required for Marginal, Unsatisfactory, or No ratings.
• General Information: Evaluators must provide details about the contract being assessed, including:
  • Contractor Name
  • Point of Contact Name and Title
  • Telephone Number
  • Contract Number (if applicable)
  • Contract Type
  • Period of Performance
  • Approximate dollar value
  • Contract Description
• Specific Questions: The questionnaire includes 10 questions covering:
  • Overall contract management
  • Quality of products and services
  • Project phase management effectiveness
  • Timeliness and schedule compliance
  • Report submission timeliness
  • Sub-contracted effort quality (if applicable)
  • Competency of key personnel
  • Communication effectiveness of key personnel
  • Performance within contract costs
  • Contract terminations or reschedules due to contractor inability to perform

This questionnaire is used to collect feedback from current or previous customers regarding the contractor's performance. Past performance is of considerable importance to this acquisition, specifically for Wayfinding Signage fabrication, delivery, and installation services. Bidders should be aware that their past performance will be evaluated based on input gathered through this form. The completed questionnaire is due by May 27, 2026, at 12:00 PM ET and should be returned via email to Ramon Samuel (rsamuel@loc.gov) with a copy to Moji Adejuwon (moad@loc.gov).

Other / Unclassified

This document, "AOC Design Standards," is an order (M-28-8) issued by the Architect of the Capitol, effective December 26, 2018. It establishes minimum design standards and criteria for the design, repairs, alterations, modernizations, renewals, and construction of facilities under the Architect of the Capitol's jurisdiction. These standards apply to all projects commencing on or after the effective date and are not intended to be used retroactively. The document is an update to the August 2012 version of the AOC Design Guide.

This document outlines the comprehensive design standards and criteria that must be adhered to for any projects related to facilities under the jurisdiction of the Architect of the Capitol. Bidders involved in opportunities with the Architect of the Capitol should consult this document to understand the mandatory design requirements, including but not limited to:

• General Requirements: Quality, dignity, long life, maintenance, security, safety, historic preservation, and Architectural Review Board (ARB) compliance.
• Specific Design Standards: Covering areas such as superstructure, shell, architecture and interior design, fire protection, mechanical, plumbing, electrical, building automation, communications, exterior horticultural and irrigation, sitework, and other construction.
• Regulatory Requirements: Compliance with various codes, standards, and specific AOC orders.
• Sustainable Design: Objectives and measures for optimizing building performance and minimizing environmental impact.
• Security: Introduction and general provisions, design standards, historic preservation, and access requirements.
• Mechanical and HVAC: Introduction, system requirements, design criteria, and specific system types.
• Electrical: Introduction, system requirements, design criteria, and specific system types.
• Building Automation System: Introduction, network, operation, and configuration.
• Communications Systems: Introduction, voice and data systems, CATV, and wiring.
• Exterior Horticultural and Irrigation Practices: Introduction, design requirements, and preservation of cultural landscapes.
• Sitework: Introduction, site preparation, roadways, parking areas, pedestrian paving, and site development.

Understanding these standards is crucial for developing compliant proposals and executing projects successfully within the AOC's jurisdiction.

Form / Attachment / Pricing Sheet

This document, Attachment J-4, is a Price Schedule and Price Detail sheet for Solicitation 030ADV26R0005 from the Library of Congress. It requires offerors to provide firm fixed prices for deliverables outlined in Section C and cross-referenced in Section F of the solicitation.

• Price Schedule (Sheet 1): Lists specific deliverables and tasks related to the "Wayfinding Fabrication, Delivery and Installation" project. This includes base requirements such as site visits, detail drawings, graphics, material samples, fabrication, delivery, installation, punch lists, operations manuals, and warranties. It also details optional items for external signage.
• Price Detail (Sheet 2): Requires offerors to break down pricing for each deliverable, specifying services, labor categories, required hours, unit amounts, number of units, and total costs for both base requirements and options.
• Deliverables: Cover a range of activities from initial site visits and design (drawings, graphics) to fabrication, delivery, installation, and post-installation support (punch list, operations manual, warranty).
• Pricing: Offerors must provide detailed pricing for all listed items, including optional elements. The provided template shows all totals as 0.0, indicating that offerors must populate this information.

This attachment is critical for bidders to understand the cost structure of the opportunity and to prepare their pricing proposals. Bidders must accurately complete both the Price Schedule and Price Detail sheets according to the requirements in Section C and Section F of the solicitation to submit a compliant offer.

Statement of Work (SOW) / Performance Work Statement (PWS)

To procure fabrication, delivery, and installation services for wayfinding signage throughout the Library of Congress's Thomas Jefferson building.

• Fabrication of all new wayfinding elements.
• Site visits for measurements, space preparation, delivery, and installation.
• Generation of shop and engineering drawings.
• Delivery of fabricated elements to the site.
• Installation of new and existing wayfinding elements.
• Provision of lighting for outdoor signage.
• Project management for scheduling, site management, and fabrication/installation.
• Consultation with Library staff, design contractors, COR, and AOC as needed.

Not explicitly stated, but implies performance within the Thomas Jefferson building.

• Adherence to Wayfinding design and approved shop drawings.
• Compliance with various codes including AOC Design Standards, NFPA 70, NFPA 101, IBC, and ADA.
• Structural and electrical engineering review and stamping for certain signage types.
• Submission of detailed drawings, material samples, prototypes, and mockups.
• Coordination with COR for reviews, approvals, and site access.
• Specific requirements for different sign types (interior, exterior, monoliths, banners, etc.) including materials, dimensions, and finishes.
• Contractor must hand-carry items up stairs if elevators are insufficient.
• Development of a written work plan for deliveries and installation.
• Provision of an Operations Manual and adherence to warranty terms.

Form / Attachment / Pricing Sheet

This document outlines the sampling and prototyping requirements for the Library of Congress Wayfinding project. It details which signs require samples and which require full prototypes, specifying the scope and quantity for each.

• Sign Types: Categorizes signs into interior (e.g., Miniliths, Monoliths, Poster Cases, Overhead Signs, Nameplates, Dimensional Graphics) and exterior (e.g., Poster Cases, Monoliths, Banners, Freestanding, Built-Up Lettering).
• Sampling: Specifies the portion or element of a sign to be sampled (e.g., a 20" square portion of a Minilith, a 6" square portion of a letter).
• Prototypes: Differentiates between partial and full prototypes, indicating the scale (e.g., 1:1 scale, production-representative) and quantity required for each.
• Deliverables: Lists specific quantities of samples and prototypes to be provided to the Library of Congress Team in D.C. and the Applied Team in London.
• Reference Sheets: Provides reference sheet numbers (e.g., W-301, W-542) for each sign type, which likely contain detailed specifications.

This document is crucial for bidders to understand the specific physical requirements for sign production. It defines the scope of work for sampling and prototyping, directly impacting material, manufacturing, and delivery efforts. Bidders must use this document to accurately estimate costs and timelines for producing the required samples and prototypes.

Solicitation / RFP / RFQ

This solicitation is for the fabrication, delivery, and installation of wayfinding signage at the Library of Congress. The project aims to improve navigation and user experience within the Library's facilities.

• Fabrication, delivery, and installation of wayfinding signage.

• Site visits, field dimensions, and meetings to finalize design and delivery requirements.

• Generation of detailed drawings and graphics for review and approval.

• Provision of material samples, prototypes, and mockups.

• Development and delivery of an operations manual.

• A one-year warranty for the installed signage.

• Optional services include fabrication, delivery, installation, and warranty for exterior signage.

• Contract Type: Firm Fixed Price.

• Period of Performance: Base period begins June 22, 2026, and ends July 1, 2027. Option periods extend through January 1, 2029.

• Estimated Value: Not explicitly stated, but includes pricing for base and option CLINs.

• Proposals must be submitted electronically via email by the response date specified in the solicitation.

• Proposals must include two volumes: Technical Proposal and Price Proposal.

• The Technical Proposal should not include price or price-related information and must address Minimum Requirements and Technical Factors.

• Key evaluation factors, in descending order of importance, are: Technical Approach, Management and Staffing Approach, Corporate Experience, Past Performance, and Price. Non-price factors combined are significantly more important than price.

• Key Deadlines:

  • Questions Due: May 11, 2026, by 12:00 Noon EST.
  • Offer Due Date: May 27, 2026.

• The solicitation is listed as "UNRESTRICTED OR SET ASIDE: " with no specific set-aside indicated in the provided sections.

• The solicitation incorporates FAR clauses by reference, including those related to commercial products and services, contract terms and conditions, and special requirements.

• Specific delivery instructions and security protocols for the Library of Congress are detailed in Section D.

• Offerors must adhere to specific proposal format and submission instructions.

• The Library reserves the right to award without discussions.