MC & NWU APECS Trousers

Amendment / Modification

This amendment re-opens Solicitation SPE1C1-25-R-0103 and details the following changes:

• Closing Date: Extended to May 4, 2026, at 3:00 PM EST.

• Contract Type: Changed from Indefinite Delivery/Indefinite Quantity (IDIQ), Firm Fixed Price to a Firm Fixed Price, Definite Quantity contract with a five (5) month ordering period.

• Set-Aside: Changed from Historically Underutilized Business Zone (HUBZone) Small Business Set-Aside to a Total Small Business Set-Aside.

• NIST SP 800-171: A current NIST SP 800-171 assessment (not older than 3 years) is now required for award consideration. Offerors must review relevant clauses.

• Royalty Caution Notice: Removed.

• Section B (Supplies or Services and Prices or Costs): Replaced in its entirety to reflect the contract type change and to detail the two (2) items covered:

  • Item 0001: Marine Corps (MC), All-Purpose Environmental Clothing System (APECS), Woodland Camouflage, Class 1, Trousers (NSN Series: 8415-01-506-5461).
  • Item 0002: NWU, APECS, Woodland Camouflage, Type III, Trousers (NSN Series: 8415-01-599-2357).

• Deliveries: Size modifications can be made unilaterally by the Government via delivery order modification at least 90 days before the incremental due date. Size changes can be bilaterally requested at any time.

• Delivery Addresses: Specified for three locations: Austin, TX; Lansing, MI; and Pendergrass, GA.

• Production Lead Time (PLT): 180 days for the first delivery order, 120 days for subsequent deliveries.

• First Lot Inspection: Contractor must contact the Contracting Officer 10 days prior to presentation for inspection. Five samples from the first lot must be sent to DLA Troop Support for inspection.

• Identification of Sources: Offerors must indicate suppliers and manufacturers for components. Changes require Contracting Officer approval.

• Laboratory and Source Sampling: Procedures for sample submission and testing are detailed.

• FAR 52.215-6 Place of Performance: Provision included.

• UPC/NSN Lists: Provided for both Item 0001 and Item 0002.

• Variation in Quantity: Limited to a 2% increase or decrease for tariff sizes.

• Section I Clauses: Several clauses/provisions are updated or replaced, including those related to System for Award Management, Small Business Set-Aside, Limitations on Subcontracting, NIST SP 800-171 DoD Assessment Requirements, and various other FAR and DFARS clauses.

• Section K: Updates to Annual Representations and Certifications.

• Product Demonstration Models (PDMs): Instructions for submission are updated, requiring four (4) of each item type from each sewing place of performance. Failure to submit acceptable PDMs may result in rejection of the offer.

• Price Evaluation: Clarified that pricing will be evaluated based on proposed unit prices multiplied by the quantity (14,400 PR) for each item.

• Solicitation page 1, Block 9 (Closing Date)

• Solicitation page 4 (Contract Type)

• Solicitation page 5 (Set-Aside)

• Solicitation page 13 (NIST SP 800-171)

• Solicitation page 14 (Royalty Caution Notice)

• Section B (Supplies or Services and Prices or Costs) - Entirely replaced.

• Section I (Clauses and Provisions) - Numerous updates and replacements.

• Section K (Representations and Certifications) - Updates.

• Pages 62-64 (PDM Submission Instructions) - Updated.

• Pages 67-68 (Evaluation Factor 1: Product Demonstration Model) - Updated.

• Pages 71-72 (Price Evaluation) - Updated.

• The closing date for offers has been extended to May 4, 2026.

• The contract type has changed, impacting how the contract will be structured and managed.

• The set-aside has changed, affecting eligibility for certain small businesses.

• A NIST SP 800-171 assessment is now a mandatory requirement for award.

• PDM submission requirements have been updated, and failure to comply may lead to offer rejection.

Specification / Standard

This document, MIL-DTL-32158, establishes the detailed specifications for "Trousers, All-Purpose, Environmental, Camouflage." It is approved for use by all departments and agencies of the Department of Defense.

• Scope: Covers three-layer laminated, waterproof, and moisture vapor permeable trousers as a component of the All-Purpose Environmental Clothing System (APECS).
• Classification: Trousers are of one type and four classes, including Woodland MARPAT Camouflage, Desert MARPAT Camouflage, Woodland Camouflage, and Desert Camouflage.
• Materials: Specifies requirements for basic material (waterproof and moisture vapor permeable cloth), reinforcement cloth (e.g., for knee and seat patches), three-layer knit cloth (as an alternate), seam sealing tape, nylon tape for suspender loops, elastic drawcords, hook and loop fasteners, buttons, and slide fasteners.
• Construction & Design: Details requirements for seam sealing, thread types, labels, drawcords, fasteners, and the overall design including elastic drawcord waist, slide fastener fly, ankle openings, cargo pockets, and reinforcement patches.
• Testing & Verification: Outlines inspection and testing procedures, including component testing, end item visual examination, dimensional examination, end item testing (e.g., hydrostatic resistance, laundering), and packaging examination.
• Intended Use: Trousers are for Marine personnel in cold weather operations as an outer layer, replacing previous ECWCS trousers.

This specification provides the detailed technical requirements for manufacturing APECS camouflage trousers. Bidders would need to ensure their manufacturing processes, materials, and quality control systems fully comply with all aspects of this detailed specification to be considered for an opportunity to produce these trousers.

Forms / Attachments / Pricing Sheet

This document lists the National Stock Numbers (NSNs), sizes, and Universal Product Codes (UPCs) for the NWU APECS Trousers being procured. It also details requirements for Product Demonstration Models (PDMs), end-item physical testing, and information regarding attachments and quality assurance requirements.

• NSN, Size, and UPC Listings: Comprehensive tables for Type II and Type III trousers, detailing specific NSNs, corresponding sizes (e.g., X-SMALL X-SHORT, LARGE LONG), and UPCs.
• Product Demonstration Models (PDMs): Three sample trousers (Medium-Regular) are required for manufacturing, visual, dimensional, and end-item testing. Two PDMs will be destroyed during testing.
• End-Item Physical Testing: Testing includes hydrostatic resistance, laundering, tape ends integrity, and physical surface appearance, performed before and after 5 laundering cycles, according to NCTRF/PD 04-11A.
• First Article: A First Article is not required unless PDMs are not required, in which case three trousers will be submitted for testing.
• Attachments: References DLA Troop Support Clothing & Textiles Additional Quality Assurance Requirements Revision 1 (August 2021).
• Quality Requirement: Clause 52.246-11 Higher-Level Contract Quality Requirement applies.
• Shade Evaluation: Details government laboratory testing for shade evaluation using specific lighting conditions and sampling procedures for fabric and components. Includes addresses for submitting samples for testing.
• Digital Patterns: Electronic patterns will be provided via DoD SAFE drop-box, requiring Gerber Accumark software (version 9 or higher). Paper patterns are available upon request during the solicitation phase.
• Special Measurements: The government may require size changes and provide altered electronic patterns or require the contractor to adjust production patterns for special measurement items.

This document is crucial for bidders to understand the specific product specifications (NSNs, sizes, UPCs), testing requirements, and quality assurance standards for the NWU APECS Trousers. It outlines the need for PDMs and the testing procedures, which directly impact production and quality control. Bidders must also be aware of the digital pattern delivery method and software requirements, as well as the possibility of special measurement orders.

Form / Attachment / Pricing Sheet

This document provides detailed specifications and deviations for Trousers, APECS, Navy Working Uniform (NWU) Type II and Type III. It serves as a technical data sheet and includes information critical for manufacturers and bidders to understand the exact requirements for these garments.

• Item Description: Specifies the product as "Trousers, APECS, Navy Working Uniform" as part of the All Purpose Environmental Camouflage (APEC) clothing system.
• Material Specifications: Details requirements for basic cloth, reinforcement material, shade, colorfastness, and appearance, referencing specific NCTRF PD documents and approved supplier lists.
• Deviations/Changes: Lists numerous modifications and substitutions to various standards and specifications (e.g., FED-STD, MIL-DTL, ASTM) that are critical for compliance.
• Testing and Qualification: Outlines procedures for visual shade examination, spectral reflectance testing, and qualification inspections, including sample sizes and acceptance criteria.
• Packaging and Marking: Specifies requirements for packing, labeling, and palletization of the end item.
• NSN and UPC Data: Provides a comprehensive list of National Stock Numbers (NSN) and Universal Product Codes (UPC) for various sizes and types of the trousers.

This document is essential for any bidder intending to manufacture or supply NWU Type II and Type III trousers. It details the precise technical specifications, material requirements, testing protocols, and acceptable deviations that must be met. Understanding and adhering to these specifications, including all listed deviations, is crucial for a compliant and successful bid. The NSN and UPC data are also vital for inventory and procurement purposes.

Form / Attachment / Pricing Sheet

This document provides a list of National Stock Numbers (NSNs), sizes, and Universal Product Codes (UPCs) for two types of trousers: ITEM 0001 (MC, APECS, Woodland Camouflage) and ITEM 0002 (NWU, APECS, Type III).

• ITEM 0001: MC, APECS, Woodland Camouflage, Trousers
  • Lists NSNs, sizes (ranging from XSMALL-XSHORT to LARGE-XLONG), and corresponding UPCs.
• ITEM 0002: NWU, APECS, Type III, Trousers
  • Lists NSNs, sizes (ranging from X-SMALL X-SHORT to XX-LARGE X-LONG), and corresponding UPCs.

This document is crucial for bidders who need to identify specific stock keeping units (SKUs) for the specified types of trousers. It provides the necessary NSN and UPC information required for procurement or inventory management related to these items.

Form / Attachment / Pricing Sheet

This document is a Purchase Description (PD) that specifies the requirements for camouflage, waterproof, and moisture vapor permeable cloths with an Anchor, Constitution, and Eagle (ACE) printed logo. It details the types of camouflage cloths, applicable documents, requirements, verification methods, packaging, and notes for intended use.

• Scope: Covers camouflage, waterproof, and moisture vapor permeable cloths with ACE logo.
• Classification: Specifies Type II (Desert camouflage NWU II) and Type III (Woodland camouflage NWU III).
• Requirements: Details physical and performance requirements including:
  • Standard sample matching for shade and appearance.
  • Use of recycled/recovered materials where feasible.
  • Material composition (laminated, waterproof, moisture vapor permeable with PTFE membrane, nylon face, and knit backing).
  • Color and pattern execution conforming to specific NWU II and NWU III requirements.
  • Physical properties such as weight, tearing resistance, hydrostatic resistance, moisture vapor transmission rate, stiffness, water permeability, spray rating, and resistance to organic liquids.
  • Colorfastness and dimensional stability.
  • Toxicity and workmanship standards.
• Verification: Outlines inspection and testing procedures, including conformance samples and end-item tests.
• Packaging: Refers to contract or order specifications for packaging requirements.
• Intended Use: Cloths are for manufacturing camouflage clothing for U.S. Navy personnel (Parka, Working, US Navy, Desert and Woodland; Trousers, APEC, Working, US Navy, Desert and Woodland).

This document is crucial for bidders seeking to supply camouflage cloth. It defines the precise technical specifications, performance standards, and testing methodologies that the material must meet. Understanding these requirements is essential for accurate product development, quality control, and successful bid submission. It also clarifies the types of camouflage patterns (Desert NWU II and Woodland NWU III) and their intended end-use items.

Form / Attachment / Pricing Sheet

This document, "Item-Level Passive RFID Technology Manufacturer's Information Guide (Revision 2 - December 2011)", provides manufacturers with detailed, step-by-step instructions and lessons learned for implementing item-level passive RFID (pRFID) technology in a uniform manufacturing environment. It outlines the processes and requirements for tagging individual items, cases, and pallets, and for uploading data to the VIM-ASAP system.

• Item-Level RFID Process: Details 17 steps from downloading contract data to uploading information to WAWF.
• Project Implementation: Outlines a sample schedule for implementing the RFID system, including tasks like team identification, manufacturer preparation, RFP distribution, and solution provider selection.
• Appendices: Includes information on VIM-ASAP, required fields for file upload, an RFP outline, an evaluation scorecard, example costs, and abbreviations.

This guide is crucial for any bidder involved in manufacturing or supplying items that require item-level RFID tagging. It provides a comprehensive understanding of the technical processes, system requirements (e.g., VIM-ASAP), data handling, and implementation timelines. Bidders can use this information to assess their capability to meet RFID requirements, estimate implementation costs, and plan their operational processes accordingly.

Form / Attachment / Pricing Sheet

This document provides lists of National Stock Numbers (NSNs), sizes, and Universal Product Codes (UPCs) for various types of trousers.

• Item 0001: MC, APECS, Woodland Camouflage, Trousers
• Item 0002: NWU, APECS, Type II, Trousers
• Item 0003: NWU, APECS, Type III, Trousers
• Each item lists specific sizes (e.g., XSMALL-XSHORT, MEDIUM-REGULAR, XX-LARGE-LONG) and their corresponding NSN and UPC.

This document is crucial for bidders who need to identify or procure specific types and sizes of trousers. It provides the necessary NSN and UPC information for ordering or referencing these items, likely for fulfilling a contract requirement.

Amendment / Modification

This document details numerous deviations and changes to the base specification MIL-DTL-32158, dated 19 January 2004, for APECS MARPAT Trousers. Key changes include:

• Material Properties: Modifications to stiffness requirements (WARP and FILLING), and changes to test methods for stiffness, puncture propagation tear, and hydrostatic resistance.
• Component Specifications: Updates to slide fastener lengths, cord lock part numbers, and leg tab hook dimensions.
• Construction and Operations: Revisions to sewing procedures, buttonhole placement, suspender loop attachment, and the addition of new operations for flap construction and eyelet placement.
• Sizing and Labeling: Addition of specific sizing information for Large X-Short and X-Large Short trousers, and updates to label information.
• Packaging and Marking: Revisions to packaging requirements, including case lot quantity, bag specifications, and compliance with various MIL-STD and ASTM standards.
• Defect Definitions: Updates to defect criteria for marking, materials, workmanship, contents, and palletization.
• Standard Samples: Revisions to standard sample information for various colors and types of materials.

Numerous sections of the base specification (MIL-DTL-32158) are affected, including paragraphs related to characteristics, stiffness, leg tabs, suspender loops, cargo pockets, buttonholes, eyelets, and packaging. Several other referenced documents (e.g., MIL-C-44436, MIL-DTL-5038, MIL-T-3530, MIL-W-5664D, MIL-DTL-32072) have also been amended, canceled, or replaced.

Bidders must ensure their proposed product complies with all the detailed changes and deviations outlined in this amendment. This includes adherence to updated material specifications, construction methods, sizing, and packaging requirements. Failure to comply with these revised specifications may result in rejection.

Solicitation / RFP / RFQ

This solicitation is for the procurement of three (3) types of trousers: MC APECS Class 1 Trousers, NWU APECS Type II Trousers, and NWU APECS Type III Trousers. The contract will be an Indefinite Delivery/Indefinite Quantity, Firm Fixed Price type with a five (5) year ordering period, divided into five (5) 12-month price tier periods.

• Product Demonstration Models (PDMs): Required for submission with the proposal. PDMs must be an exact match to the solicitation's specifications, patterns, and technical data. Failure to submit acceptable PDMs will result in rejection of the entire offer.

• Technical Proposal: Required to demonstrate the offeror's ability to meet the Government's requirements.

• Past Performance: Will be evaluated based on recency, relevancy, and quality of performance.

• Domestic Material Restrictions: Offerors must comply with the Berry Amendment, Buy American Act, and other domestic material restrictions.

• RFID Tags: Required at the item, pallet, and case level for all items.

• Supply Chain Traceability Documentation: Contractors must retain and provide documentation demonstrating item conformity.

• Contract Type: Indefinite Delivery/Indefinite Quantity, Firm Fixed Price.

• Period of Performance: Five (5) year ordering period, with five (5) 12-month price tier periods.

• Estimated Value: Not explicitly stated, but minimum quantities are defined.

• Guaranteed Minimum Dollar Value: 1,449 PR (combined minimum quantity for all three items).

• Proposal Submission: Primarily through the DLA Internet Bid Board System (DIBBS). Email offers are not authorized for initial submissions.

• PDM Submission: Must be received by the closing date and time. Partial proposals (PDM only or Solicitation package only) will not be evaluated.

• Evaluation Criteria: Best Value Source Selection procedures will be used. Non-price/non-cost factors (Technical Proposal, PDMs, Past Performance) are significantly more important than price.

• Key Deadlines: Proposal submission deadline is 3:00 PM local time on 2025-Dec-22.

• This requirement is solicited as a Historically Underutilized Business Zone (HUBZone) Small Business Set-Aside.

• Offerors must be registered in SAM and DIBBS.

• Proposals must remain valid for 180 calendar days after the receipt of offers.

• Offerors are cautioned to make their original offer their best offer, as award may be made without discussions.

• NIST SP 800-171 assessment is required for consideration for award.

Form / Attachment / Pricing Sheet

This document provides detailed specifications and deviations for NWU Type II and Type III trousers, which are part of the All Purpose Environmental Camouflage (APEC) clothing system. It serves as a technical data sheet for potential bidders to understand the exact requirements for these garments.

• Item Description: Trousers, APECS, Navy Working Uniform (NWU) Type II and Type III.
• Governing Specifications: Primarily NCTRF PD 04-11A dated 17 April 2012, with numerous deviations and changes listed.
• Material Requirements: Details on basic cloth and reinforcement material, including piece numbers and shade requirements.
• Color and Appearance: Specifics on shade matching, visual shade evaluation, and spectral reflectance testing, referencing standards like AATCC EP 9 and PM-SOF SSES Spec 07-11.
• Testing and Qualification: Outlines qualification and conformance inspection procedures, including sample sizes, testing methods (visual, spectral reflectance, NIR), and acceptance criteria.
• Packaging and Marking: Specifies requirements for case lot quantities, packaging materials (e.g., ASTM-D-5118), and lot numbering (MIL-STD-129R).
• Deviations/Changes: Extensive list of modifications to various standards and specifications (e.g., FED-STD-595, MIL-DTL-3530, MIL-STD-129R).

This document is critical for any bidder intending to supply NWU Type II and Type III trousers. It details the precise technical specifications, material requirements, testing protocols, and packaging standards that must be met. Bidders must carefully review all listed deviations and changes to ensure their proposed product complies fully with the government's requirements. Understanding these specifications is essential for accurate proposal development and successful contract fulfillment.

Forms / Attachments / Pricing Sheets

This document provides a detailed list of National Stock Numbers (NSNs), sizes, and Universal Product Codes (UPCs) for Type II and Type III NWU Trousers (APECS, NWU). It also outlines requirements for Product Demonstration Models (PDMs) and First Article testing, along with details on shade evaluation and testing procedures for components.

• NSN, Size, UPC Listings: Comprehensive tables for Type II and Type III trousers, covering a wide range of sizes from X-Small X-Short to XX-Large X-Long.
• Product Demonstration Models (PDMs): Requirement for three sample trousers (Medium-Regular size) for manufacturing, visual, dimensional, and end-item testing. PDMs used for physical testing will be destroyed.
• End-Item Physical Testing: Includes hydrostatic resistance, laundering, tape ends integrity, and physical surface appearance tests, performed before and after 5 launderings.
• First Article: If PDMs are not required, a First Article of three trousers will be submitted for similar testing. Any failure will result in rejection.
• Shade Evaluation: Details government laboratory testing for shade, including sampling procedures based on lot size and cutting swatch dimensions for single-color, multi-color camouflage, and OCP/OEFCP items.
• Testing Locations & Procedures: Specifies addresses and procedures for submitting samples for shade and physical testing, including the use of DD Form 1222.
• Quality Assurance: References DLA Troop Support Clothing & Textiles Additional Quality Assurance Requirements Revision 1 (August 2021) and Clause 52.246-11 Higher-Level Contract Quality Requirement.
• Digital Patterns: Information on receiving electronic patterns via DoD Secure Access File Exchange (DoD SAFE), requiring Gerber Accumark software (version 9 or higher).
• Special Measurements: Government reserves the right to make size changes, potentially requiring altered electronic patterns or contractor adjustments.

This document is crucial for bidders as it specifies the exact items being procured (NWU Trousers Types II and III) with detailed NSN, size, and UPC information. It outlines critical testing requirements (PDMs, First Article, Shade Evaluation) and submission procedures, including the need for specific software for digital patterns. Understanding these requirements is essential for accurate proposal preparation and ensuring compliance with quality and testing standards.

Solicitation / RFP / RFQ

This document, dated December 3, 2024, appears to be a solicitation or related document for the procurement of "Trousers, APECS, MARPAT". It lists National Stock Numbers (NSNs) and associated sizes and UPCs for these trousers.

• Product Demonstration Models (PDMs): Three sample trousers (Medium-Regular size) are required for submission to undergo manufacturing, visual, dimensional, and end-item testing.

• End-Item Physical Testing: Two trousers will undergo testing according to MIL-DTL-32158 dated January 19, 2004. This testing includes hydrostatic resistance (before and after laundering), laundering, tape ends integrity (before and after 5 laundering), and physical surface appearance (before and after 5 laundering).

• Material Caution: Use of alternate cloth and components is strongly discouraged due to technical complexity. If alternates are used, they must be documented at the time of offer, but may result in a lower evaluation rating.

• First Article: If PDMs are not required, a First Article consisting of three trousers will be submitted for similar manufacturing, visual, dimensional, and end-item physical testing.

• Quality Assurance: Includes DLA Troop Support Clothing & Textiles Additional Quality Assurance Requirements Revision 1 (August 2021) and references ANSI/ISO/ASQ Q9001-2015.

• Shade Evaluation: Specific guidance is provided for shade evaluation of contractor-furnished materials, including sampling tables and addresses for submitting swatches for government testing.

• Digital Patterns: Electronic patterns will be provided via DoD SAFE drop-box, requiring Gerber Accumark software (version 9 or higher). Paper patterns are available upon request during the solicitation phase.

• Special Measurements: The government reserves the right to make size changes, potentially requiring special measurement items and adjustments to production patterns.

• PDMs/First Article: Samples are required for testing. PDMs used for physical testing will be destroyed.

• Shade Testing: Samples and DD Form 1222 to be sent to US ARMY CCDC Soldier Center, Natick, MA.

• Physical Testing: Test reports for components are required, with samples forwarded upon request to US ARMY CCDC Soldier Center, Natick, MA.

• Evaluation: Alternate materials may result in a lower rating. Inspection at Source/Acceptance at Source is applicable.

Not explicitly stated in the provided text, but quality requirements and testing procedures are detailed.

• The document lists specific NSNs, sizes, and UPCs for the trousers.
• It details the testing procedures and requirements for both PDMs and First Articles.
• Information regarding digital pattern delivery and software requirements is included.
• Addresses for submitting samples and test reports are provided.

Other / Unclassified

This document, "DLA Troop Support Clothing & Textiles Additional Quality Assurance Requirements (Revision 1 dated August 2021)," outlines the minimum contractual quality system requirements for DLA Troop Support Clothing & Textiles contracts. It supersedes the October 2018 version and details various quality assurance procedures, including general requirements, inspection requirements, quality testing, and final examination.

This document is crucial for potential bidders as it defines the quality standards and processes that must be adhered to for contracts related to DLA Troop Support Clothing & Textiles. Key areas relevant to bidders include:

• General Requirements: Contractor obligations for obtaining technical data and testing, quality system requirements based on item classification (technical description, complexity, criticality), and requirements for Product Demonstration Models (PDMs), First Article Testing (FAT), and Production Testing.
• Inspection Requirements: Procedures for lot formation (fabric, component, end item), lot numbering, traceability, and presentation of lots for inspection.
• Quality Testing Requirements: Details on certified test reports, government acceptance testing (including shade evaluation and near infrared testing), and government contractor testing.
• Forms: References to various forms (e.g., DD Form 1222, DD Form 250, DLA Form 6004, DLA Form 6005) that are integral to the quality assurance process.
• Non-Conforming Material: Procedures for handling non-conforming material, including waiver processes and corrective action plans.

Understanding these requirements is essential for bidders to accurately estimate costs, develop compliant proposals, and ensure successful contract performance.

Form / Attachment / Pricing Sheet

This document provides guidance on uploading proposals through the Defense Logistics Agency (DLA) Internet Bid Board System (DIBBS). It outlines the process for submitting offers, including requirements for completion, submission, and potential modifications.

• Offers must be signed and completed in their entirety according to solicitation requirements.
• All associated documents must be added before selecting 'submit'.
• Data is not saved until the offer is submitted.
• Once submitted, documents can be added but not removed.
• Late submissions, modifications, and withdrawals are subject to specific FAR provisions (52.212-1, 52.214-7, or 52.215-1).
• Offerors are responsible for ensuring proposals reach the designated Government office by the specified time, using authorized transmission methods.
• Unavailable proposal upload capability is not an acceptable reason for a late bid; refer to the solicitation for alternative methods.
• The DIBBS system allows uploading offers by selecting the 'Offer' icon on the RFP search screen.
• The Upload Offers window includes sections for uploading documents, viewing pending submissions, and viewing submitted offers.
• File upload specifications include: up to 60 characters for description, specific acceptable file extensions (.doc, .docx, .jpg, .jpeg, .tif, .tiff, .gif, .pdf, .rtf, .txt, .xls, .xlsx), and a maximum file size of 10 MB.
• File names cannot contain spaces and can only use hyphens (-) and underscores (_).
• Each offer must contain one document designated as the 'Offer' via a checkbox.
• Submitted offers are read-only, but additional documents can be submitted prior to the close date.

This guidance is critical for bidders to understand the correct procedure for submitting proposals and associated documents via DIBBS. It highlights key requirements, potential pitfalls (like late submissions or incorrect file formats), and the system's functionality for managing offer submissions. Adhering to these guidelines ensures that bids are properly received and considered.

Performance Specification

This document, MIL-PRF-32142, establishes the performance requirements for a waterproof, windproof, and moisture vapor permeable camouflage printed cloth. It is intended for use in the fabrication of the All Purpose Environmental Clothing System (APECS) parkas and trousers.

• Classification: The cloth is classified into two types:

  • Type I: For USMC APECS Parkas and Trousers, with two classes: MARPAT Woodland Camouflage and MARPAT Desert Camouflage.
  • Type II: For broad service APECS Parkas and Trousers, with two classes: US Woodland Camouflage and Day Desert Camouflage.

• Performance Requirements: The cloth must meet stringent specifications for:

  • Weight, tearing resistance, and hydrostatic resistance (sustained and to burst).
  • Evaporative resistance and moisture vapor transmission rate.
  • Stiffness, water permeability (under various conditions including cold and wet flex), and spray rating.
  • Resistance to organic liquids and physical surface appearance after laundering and continuous wash.
  • Dimensional stability.
  • Colorfastness to laundering, light, and perspiration.
  • Color matching and pattern execution, with specific tolerances for pattern repeats.
  • Spectral reflectance values within defined ranges for different camouflage patterns.
  • Toxicity: Must not present a dermal health hazard.

• Materials: Recycled, recovered, or environmentally preferable materials are encouraged if they meet or exceed operational requirements.

• The specification outlines requirements for first article inspection and conformance inspection.

• Testing procedures and methods are detailed, referencing various ASTM, AATCC, and other standards.

• Bidders will need to ensure their proposed cloth meets all specified performance requirements and passes the detailed inspection and testing procedures outlined.

• Specific details regarding color matching, pattern execution, and spectral reflectance are critical for evaluation.

• Not specified in this document.

• The document references numerous other specifications, standards, and drawings that must be consulted.

• It includes detailed procedures for various tests, including laundering, water permeability, and moisture vapor transmission.

• Disposal of printed seconds/mill seconds/rejected material is addressed.

Form / Attachment / Pricing Sheet

This document is a Purchase Description for U.S. Navy Working Uniform All Purpose Environmental Camouflage System (APECS) Trousers in Desert and Woodland camouflage. It details the requirements for the material, design, construction, and testing of these trousers.

• Scope: Covers requirements for US Navy APECS trousers in desert and woodland camouflage.
• Classification: Specifies Type II (Desert Camouflage NWU II) and Type III (Woodland Camouflage NWU III).
• Sizes: Provides a schedule of available sizes (X-Small to XX-Large) and lengths (X-Short to X-Long).
• Intellectual Property: Notes Government ownership of Navy patterns and logos.
• Applicable Documents: Lists numerous Federal Standards, Commercial Item Descriptions, Department of Defense Specifications, and non-government publications (AATCC, ASQ, ASTM, TAPPI, ISO) that must be conformed to.
• Requirements: Details material specifications (basic material, reinforcement material, three-layer knit laminate), component requirements (color, sealing tape, nylon tape, drawcord, fasteners, thread, snaps, labels), construction methods (stitches, seams, stitching, bartacks, eyelets, seam sealing), manufacturing operations, and finished measurements.
• Verification: Outlines inspection classifications (First article, Conformance) and testing procedures (component testing, trouser laundering, hydrostatic resistance, seam seal tape ends integrity, color change, physical surface appearance, barrel lock test, infrared reflectance, toxicity).
• Intended Use: Trousers are for US Navy personnel in cold/wet weather conditions.

This document is critical for any bidder intending to manufacture or supply APECS trousers for the U.S. Navy. It defines all technical specifications, material requirements, construction standards, and testing protocols that must be met. Bidders must carefully review these requirements to ensure their product offerings comply fully.