Motor Fuel Maintenance: FA283526Q0004

Performance Work Statement (PWS)

This PWS outlines the requirements for performing Preventative Maintenance (PM) on Motor Fuel Dispensers at Building 1642, 70 Chenault St., Hanscom AFB, MA.

• Provide all management, labor, tools, equipment, test equipment, supplies, personal protective equipment, parts, and transportation necessary for Motor Fuel Dispenser Preventative Maintenance.

• Services include inspecting and servicing all components as detailed in Appendix A.

• Repairs will be coordinated with the Contracting Officer's Representative (COR) and CEOES.

• All services and parts must conform to manufacturer's equipment specifications.

• Performance objectives for Monthly Inspections, Six Month Inspections, and Filter Change and Strainer Cleaning are 100% Compliance.

• The contract includes a base year and four option years, with specific dates provided for each.

• Base Year: 26 Sept 2026 to 25 Sept 2027

• Option Year 1: 26 Sept 2027 to 25 Sept 2028

• Option Year 2: 26 Sept 2028 to 25 Sept 2029

• Option Year 3: 26 Sept 2029 to 25 Sept 2030

• Option Year 4: 26 Sept 2030 to 25 Sept 2031

• Work will be performed at Building 1642, Hanscom AFB, MA.

• Hours of Operation: Monday through Friday, 07:30 a.m. to 4:00 p.m., excluding Federal Holidays.

• Quality Assurance: Government will evaluate contractor performance; COR will participate in administration.

• Environmental Protection and Safety: Contractor must comply with all applicable federal, state, and local laws and regulations.

• Hazardous Waste: Contractor must dispose of hazardous waste according to regulations.

• Spills: Immediate reporting of spills to 911 and the COR is required, with a written report within four hours.

• Housekeeping: Work areas must be kept clean and neat.

• Access: Contractor personnel must comply with base access requirements, including identification and vehicle passes. Foreign Nationals have specific rules.

• Health and Safety: Contractor must take steps to prevent accidents and preserve health and safety.

• Ozone Depleting Substances: Contractor shall not use or require the use of Class I Ozone Depleting Substances (ODS).

Solicitation / RFP / RFQ

This solicitation seeks proposals for preventative maintenance services for motor fuel dispensers located at Building 1642, 70 Chenault St., Hanscom AFB, MA 01731. The services are required by Civil Engineering (CE).

• Monthly inspections and preventative maintenance (PMs) for motor fuel dispensers.

• Six-month inspections and PMs for shear valves.

• 300,000-gallon filter changes.

• The Product Service Code (PSC) is F108.

• The contract type is Firm Fixed Price.

• The period of performance includes a base year and four option periods, extending up to September 25, 2031.

• Specific quantities for each service are detailed in the schedule (e.g., 12 monthly inspections per year, 6 filter changes per year, 2 shear valve PMs per year).

• Offers will be evaluated on a Lowest Price Technically Acceptable (LPTA) basis.

• Technical proposals must demonstrate understanding of requirements and the ability to perform as stated in the Performance Work Statement (PWS).

• Proposals will be evaluated as acceptable or unacceptable for the technical factor.

• Only technically acceptable proposals will be evaluated for price.

• The offer due date is April 22, 2026, at 02:00 PM.

• The acquisition is set aside 100% for Small Business.

• NAICS Code: 562910, Size Standard: 1000.

• The solicitation incorporates FAR clauses 52.212-1, 52.212-3, and 52.212-4 by reference, with 52.212-5 attached.

• Payment instructions will be processed through Wide Area WorkFlow (WAWF).

• A list of attachments includes the Wage Determination, Motor Fuel PWS-Final, and several Preventative Maintenance Tables.

Form / Attachment / Pricing Sheet

This document is a U.S. Department of Labor Wage Determination (Revision No. 32) applicable to the Service Contract Act. It specifies the minimum wage rates and fringe benefits required for various occupations in specific counties and towns within Massachusetts.

• Lists specific counties and towns in Massachusetts where the wage determination applies (Essex, Middlesex, Norfolk, Plymouth, and Suffolk).
• Provides a detailed list of occupation codes, titles, and corresponding minimum hourly wage rates.
• Includes footnotes and general notes regarding benefits, hazardous pay, uniform allowances, and conformance processes.

This document is crucial for bidders to understand the minimum labor costs associated with the opportunity. It dictates the required wages and benefits for service employees working on the contract, directly impacting the cost proposal. Bidders must ensure their proposed wages meet or exceed these minimums to comply with the Service Contract Act.

Form / Attachment / Pricing Sheet

This document outlines the recommended preventive maintenance schedule and procedures for "The Atlas Fuel System" components. It details what maintenance is required, how often it should be performed, and who is responsible for the inspection and repair.

• Components: Lists specific parts such as pump pulleys, belts, belt tension, tank, nozzle hooks and shafts, mechanical computers, door locks, and water in the tank.
• Recommended Frequency: Specifies intervals for maintenance (e.g., every six months, after every fuel tank fill-up) or triggers (e.g., if a squealing noise occurs).
• Recommended Maintenance: Provides step-by-step instructions for each maintenance task, including lubrication, inspection for damage or wear, and power removal procedures.
• Who Performs the Inspection/Repair: Designates whether the task is for the "Owner" (inspection) or an "ASC" (Authorized Service Center) for repair and testing.
• Warnings: Includes critical safety warnings regarding electrical shock, pinch points, and the handling of pressurized flammable fuel and lethal voltages. It emphasizes that only Gasboy-trained ASCs should service the unit.

This document is crucial for bidders to understand the ongoing maintenance requirements for the Atlas Fuel System. It highlights the need for regular inspections and servicing, the specific tasks involved, and the safety protocols that must be followed. Bidders should consider these maintenance requirements when developing their proposals, particularly if the opportunity involves the operation, maintenance, or support of this fuel system.

Form / Attachment / Pricing Sheet

This document outlines the preventative maintenance procedures for "The Atlas Fuel System" components, specifically focusing on Meters, Valves, Filter change and strainer cleaning, and Shear valves. It details the recommended frequency for these maintenance tasks, the specific maintenance steps to be performed, and identifies who is responsible for the inspection and repair (Owner-Inspect or ASC - Authorized Service Contractor).

• Meters, Valves: Monthly inspection for leaks, with specific steps for removing power, blocking the pump, inspecting hydraulic connections and seals. Notes that some seal staining is normal.
• Filter change and strainer cleaning: For new installations, after 50,000 gallons or one month. For subsequent changes, after 300,000 gallons, every six months, or when fuel delivery slows. These tasks must be performed by an ASC.
• Inspect and lubricate shear valves: Recommended every six months. Includes detailed steps for inspecting valve operation, lubricating with SAE10 oil, and testing.

This document is crucial for bidders to understand the ongoing maintenance requirements for the fuel systems associated with the opportunity. It highlights the need for regular inspections and specific maintenance tasks, including safety warnings related to fuel leaks, electrical hazards, and pinch points. It also clarifies that certain maintenance tasks, such as filter changes and shear valve servicing, must be performed by Gasboy-trained ASCs, which may impact the bidder's proposed approach to service and support.

Other / Unclassified

This document contains pages 63 and 64 from the "Atlas™ Fuel Systems Owner's Manual - September 2011." It details preventive maintenance procedures for external leaks, displays, breakaways, warning tags, operating instructions, and hose continuity for fuel systems.

This information is relevant to bidders by outlining the expected maintenance and inspection requirements for fuel systems. It specifies the frequency of checks, the recommended maintenance tasks, and who is responsible for performing these tasks (Owner or an Authorized Service Center - ASC). The document also includes critical safety warnings regarding flammable fuel and electrical hazards, emphasizing that only trained ASC personnel should service the equipment. This provides insight into the operational environment and potential maintenance obligations associated with the opportunity.

Other / Unclassified

This document is a page from the "Atlas™ Fuel Systems Owner's Manual - September 2011" and details the "Preventive Maintenance Table" for fuel systems. It outlines components, recommended frequencies for maintenance, recommended maintenance procedures, and who performs the inspection/repair.

This document provides specific guidance on the preventive maintenance required for fuel system components, including stainless steel sheathing, lower doors, and hoses/swivels. It details inspection frequencies and procedures, emphasizing safety warnings related to leaking fuel, pressurized components, and electrical hazards. It also specifies that only Gasboy-trained ASCs should service the units and warns against using excessive hose lengths. This information is relevant for bidders to understand the maintenance expectations and potential operational constraints associated with the fuel systems if this document is part of a solicitation for maintenance services or related equipment.

Form / Attachment / Pricing Sheet

This document, "Preventative Maintenance," is an excerpt from the Atlas Fuel Systems Owner's Manual (September 2011). It details recommended preventative maintenance procedures for specific components of the Atlas Fuel System, likely related to a SAM.gov opportunity.

• Hose Retrievers: Requires weekly inspection for fraying, broken cables, or cables wrapped around hoses. Repairs must be performed by an ASC. A warning is included regarding the trip hazard posed by improperly recoiled hoses.
• Nozzles and Boot Area: Requires weekly inspection for damage, leaks, loose spouts, or missing parts. Vapor recovery boots (bellows) must be inspected for proper seal and damage. Consult the nozzle manufacturer for additional inspections. Repairs must be performed by an ASC. A warning is included regarding the ignition of leaking fuel and severe injury or death from damaged pumps/dispensers.

This document outlines critical maintenance tasks and safety warnings for components that may be part of the equipment or services being procured. Bidders should review these requirements to understand the expected upkeep and safety protocols associated with the opportunity. It highlights the need for authorized service centers (ASCs) for repairs, which may be a factor in service delivery or cost proposals.

Other / Unclassified

This document is a protected PDF file that cannot be opened with the current reader. It indicates that a compatible PDF reader is required to view the content.

This document does not contain information about the opportunity's requirements, scope, or submission details. Bidders will need to obtain a compatible PDF reader to access the actual solicitation or related documents.