Naval Sea Logistics Center Readiness Based Sparing Services

Amendment / Modification

This amendment addresses questions received from potential bidders regarding the solicitation.

• Section A - Solicitation/Contract Form: Miscellaneous text has been modified.

• Attachment 4 - Personnel Qualifications: Clarifications are provided regarding the Senior Engineer and Project Manager SR roles, including experience requirements, resume submissions, and substitution policies.

• RFP Section C, "C-237-H002 SUBSTITUTION OF KEY PERSONNEL" and Section L, paragraph 3.1.3: Referenced for post-award substitution of key personnel.

• Attachment 4, Section A (Recommended Labor Mix): Clarification on the use of alternative labor categories like Logisticians or Data Scientists and the requirement for explanation if the proposed labor mix differs from the estimate.

• The amendment clarifies requirements related to personnel qualifications and labor mix, which may impact how bidders prepare their proposals.

• It addresses questions about the typical number of models, turnaround times for model execution and rework, contractor responsibility for data cleanup, required software versions (OPUS Suite 2024.16), and the mandatory nature of fields in the results spreadsheet.

• The review/acceptance workflow for model outputs and the submission package contents are also clarified.

• Past performance as a subcontractor is confirmed as acceptable.

• FAR 52.222-41 applicability is confirmed at the SeaPort MAC level if SCLS labor categories are proposed.

• The amendment confirms that the Naval Sea Logistics Center is not aware of this work being performed under other contracts.

Solicitation / RFP / RFQ

This solicitation is for Readiness Based Sparing (RBS) Modeling services to support the Naval Sea Logistics Center (NAVSEALOGCEN) in providing life-cycle logistics support solutions for US Naval systems. The objective is to procure services for executing the mission of developing, maintaining, and assessing life-cycle logistics support policies, procedures, and data systems.

• Provide subject matter technical expertise in the development of RBS models utilizing OPUS SUITE [OPUS and SIMLOX].

• Execute and deliver RBS models to support system development and sustainment throughout its lifecycle using the Navy Common Readiness Model (NCRM).

• Provide model results to NAVSEALOGCEN and stakeholders using a standardized NAVSEALOGCEN RBS Results Spreadsheet.

• Provide support to NAVSEALOGCEN for the Maritime Allowance RBS Re-Provisioning and Change Review Board (MARRC-RB) package submission.

• Provide monthly customer progress reports.

• All contractor personnel require a Secret clearance.

• Contract Type: Cost Plus Fixed Fee (CPFF)

• Period of Performance: Base Year (01 Jun 2026 - 31 May 2027) with four (4) option years.

• Estimated Total Man Hours: 251,580

• Proposals must be submitted through the PIEE Solicitation Module by the solicitation closing date and time.

• Evaluation Factors: Technical (Approach, Management, Personnel), Past Performance, and Cost Proposal.

• Factor 1 (Technical) is more important than Factor 2 (Past Performance). Factors 1 and 2 combined are significantly more important than Factor 3 (Cost Proposal).

• Award will be made to the responsible Offeror whose proposal demonstrates the best value to the Government.

• This requirement is a small business set-aside.

• Specifically, it is a Women-Owned Small Business (WOSB) set-aside.

• Access to OPUS Suite software will be provided by NAVSEALOGCEN.

• Cybersecurity Maturity Model Certification (CMMC) Level 2 (Self) is required.

• Key personnel include a Senior Engineer and Project Manager SR, requiring specific qualifications including OPUS Suite experience.

Form / Attachment / Pricing Sheet

This document is a Contract Data Requirements List (CDRL) that specifies data items to be delivered by the contractor under a contract. It outlines the specific data requirements, including titles, descriptions, and submission details.

• Data Item Number (A003): Contractor's Data Management Plan (CDMP)
• Title: Contractor's Data Management Plan (CDMP)
• Authority: DI-MGMT-82228
• Contract Reference: PWS
• Requiring Office: NAVSEALOGCEN
• Distribution Statement D: Authorized for military and civilian employees of DoD, and U.S. DoD contractors or grantees performing specific jobs.
• First Submission: 30 days after award of contract.
• Electronic Media Requirements: Submitted in Adobe Acrobat PDF format 2.0 or later via e-mail.
• Distribution: Final copies to NAVSEALOGCEN (1), COR (1), TA (1), and NSLC 02 (3).

This CDRL details a specific deliverable required from the contractor: a Data Management Plan. Bidders should review the requirements for the CDMP, including its format (PDF), submission deadline (30 days post-award), and distribution instructions, to understand their data submission obligations if awarded the contract.

Form / Attachment / Pricing Sheet

This document, "Attachment 4 – Personnel Qualifications," provides guidance on recommended labor mixes and defines government-specified labor categories for the opportunity. It aims to help offerors understand the expected personnel requirements and structure their proposals accordingly.

• Recommended Labor Mix: Offers are provided with a recommended distribution of labor hours across various labor categories (Program Manager, Senior Engineer, Engineer II, Engineer I, and their overtime variants) for base year and option years. While offerors have latitude to propose their own labor mix, any deviations must be explained in the Staffing Plan Narrative and justified for quality, efficiency, and cost-effectiveness. The government will consider this estimate in proposal evaluation.
• Government Defined Labor Categories: This section details the desired education, experience, certifications, and security clearance requirements for specific labor roles. It also provides the closest Bureau of Labor Statistics (BLS) Standard Occupational Classification (SOC) codes and recommended pay ranges.
• Job Descriptions: For each defined labor category (Project Manager SR, Senior Engineer, Engineer II, Engineer I), a detailed job description outlines key responsibilities, required and desired experience, desired education, and security clearance.

This attachment is crucial for bidders to understand the personnel expertise and experience the government expects. It directly impacts proposal development by:

• Guiding the creation of the offeror's staffing plan.
• Informing the selection of proposed labor categories and their associated costs.
• Providing a basis for evaluating the alignment of proposed personnel qualifications with the PWS requirements.
• Highlighting the importance of justifying any deviations from the recommended labor mix to avoid potential negative impacts on evaluation.

Form / Attachment / Pricing Sheet

This document is Appendix B, a Non-Disclosure Agreement (NDA) required for contractor employees and subcontractors working under a contract with the Naval Sea Logistics Center. It outlines the obligations of individuals who may access sensitive or proprietary information belonging to the Government or other Contractors.

• Defines proprietary information, including cost/pricing data, spend plans, technical proposals, cost estimates, negotiation strategies, and statements of work.
• Requires individuals to agree not to discuss or disclose such information to unauthorized persons.
• Warns of potential irreparable injury to the information owner due to unauthorized disclosure, use, or negligent handling.
• States that the U.S. Government may seek remedies to enforce the agreement, including court orders, and may assess court costs and attorney fees.
• Outlines conditions under which an individual may seek other employment, requiring disclosure of the continuing obligation to prospective employers.
• Lists exceptions to the non-disclosure obligation, such as information already in the public domain, disclosed with prior written approval, independently developed, disclosed via court order, or inadvertently disclosed despite reasonable care.
• Includes signature blocks for the employee/subcontractor, witness, and organization.
• Details criminal penalties (up to five years confinement and fines) and civil penalties (up to $50,000 for individuals, $500,000 for organizations, plus twice the compensation received or offered) for violations.

Bidders should be aware that personnel involved in performing this contract will be required to sign this Non-Disclosure Agreement. It highlights the sensitive nature of the information they may encounter and the legal consequences of unauthorized disclosure.

Form / Attachment / Pricing Sheet

This document, "Appendix A: Performance Requirements Summary," outlines the performance standards, objectives, monitoring methods, acceptable quality levels (AQLs), and incentive structures for various aspects of a contract. It serves as a critical reference for bidders to understand the expected performance outcomes and how they will be measured and evaluated.

• Cost Control: Requirements for demonstrating cost control, explaining deviations, and submitting monthly progress reports. Includes AQLs for cost deviation details and justification.
• Schedule Control: Expectations for demonstrating schedule control, submitting progress reports, and on-time delivery of deliverables/CDRLs. Includes AQLs for project progress demonstration and timely deliverable submission.
• Quality: Standards for deliverable/CDRL submission, including acceptable quality levels and monthly progress reports. Includes AQLs for deliverable ratings and progress report content.
• Business Relations: Requirements for contractor responsiveness to government requests, including response times and tracking/logging of responses. Includes AQLs for response timeliness.
• Staffing Management: Procedures for contractor notification of personnel changes, requirements for qualified replacements, and reporting of labor disputes. Includes AQLs for timely notification of replacements and labor disputes.

This appendix is crucial for bidders as it details the performance metrics and quality standards that will be used to evaluate contract performance. Understanding these requirements is essential for developing accurate proposals, estimating resource needs, and ensuring compliance throughout the contract period. It highlights the government's expectations regarding cost, schedule, quality, communication, and personnel management.

Form / Attachment / Pricing Sheet

This document is a Contract Data Requirements List (CDRL) that specifies data items to be delivered by the contractor under a contract. It outlines the specific data items, their titles, descriptions, and delivery requirements.

• Data Item Number (A004): Quality Assurance Program Plan (QAPP)
• Contract Reference: Performance Work Statement (PWS)
• Frequency of Delivery: One-Time (OTIME)
• First Submission: 30 days after award
• Distribution Statement D: Authorized for military, U.S. DoD contractors, or grantees for specific contractual purposes.
• Electronic Media Requirement: Submission in Adobe Acrobat PDF format via e-mail.
• Addressees: NAVSEALOGCEN (See Task Order), COR and TA (identified in Section G), NSLC 02 (identified in Section G).

This CDRL details a required deliverable, the Quality Assurance Program Plan (QAPP), which bidders must understand and plan to provide if awarded the contract. It specifies the format, submission timeline, and distribution limitations for this crucial document.

Other / Unclassified

This document is a joint instruction (NAVSEAINST 4441.12A and NAVSUPINST 4441.37A) establishing the Maritime Allowance Readiness Based Sparing (RBS), Reprovisioning, and Change-Review Board (MARRC-RB). The MARRC-RB is responsible for reviewing and approving RBS optimizations and major reprovisioning efforts that impact maritime allowances. It also provides oversight for allowance management and identifies potential policy issues.

This document outlines the process and board responsible for managing and approving changes to maritime allowances. While not a direct solicitation, understanding this process is crucial for any vendor whose work involves or impacts the provisioning, sparing, or reprovisioning of maritime systems and their associated allowances. It details the types of efforts that trigger MARRC-RB review (RBS optimizations, Allowance Change Requests, major reprovisioning efforts) and the roles of various commands and offices (NAVSEA, NAVSUP, PEOs, ISEAs) in the process. The document also references several enclosures that provide detailed instructions and checklists for specific types of reviews, such as RBS System Checklist, Non-RBS Major Reprovisioning Systems Checklist, Allowance Change Request Checklist, and Allowance Exception Request Checklist. These enclosures may contain specific data requirements or procedural steps relevant to contractors involved in these areas.

Form / Attachment / Pricing Sheet

This document is a DD Form 1423-1, Contract Data Requirements List (CDRL). It specifies data items required from a contractor as part of a contract. Bidders should use this form to understand the specific data deliverables expected under the contract.

• System/Item: Readiness Based Sparing
• Contract/PR No.: N6572626R3000
• Contractor: TBD
• Data Item No.: A006
• Title of Data Item: Configuration Management Plan (CMP)
• Subtitle: Configuration Item Inventory Report
• Authority: PWS
• Remarks:
  • Block 9: Distribution Statement D (Distribution authorized to Military and civilian employees of the DoD or U.S. DoD contractors or grantees who enter into a contract or award with the DoD to perform a specific job, to supply labor and materials, or to provide products and services). Further distribution is in the furtherance of that contract or award.
  • Block 12: 45 days after the award of contract.
  • Block 13: The first of each month after the final submission at least 45 days after the award of contract.
  • Block 14: MS Excel xls or xlsx compatible format.
  • Addresses and quantities for distribution are specified in Section G of the contract.
  • Contacting Officer & Contractual contact information identified in Section G of the contract.

This CDRL indicates that the contractor will be required to submit a Configuration Management Plan (CMP) and a Configuration Item Inventory Report in MS Excel format. Bidders should note the submission deadlines and distribution requirements outlined in the remarks and be prepared to comply with these data delivery obligations.

Form / Attachment / Pricing Sheet

This document is a Contract Data Requirements List (CDRL) that specifies data items required from a contractor. It outlines the specific data items, their titles, descriptions, and submission requirements.

• Data Item Number (DID): DI-MGMT-81945A
• Title: Phase-Out Transition Plan
• System/Item: Readiness Based Sparing
• Contract Reference: PWS
• Frequency: OTIME (One Time)
• Date of First Submission: 60 Days prior to the end of the contract's last period of performance.
• Distribution Statement: D (Authorized for military and civilian employees of DoD or U.S. DoD contractors/grantees for contractual purposes).
• Format: Electronic Media Requirements specify delivery in Adobe Acrobat PDF format 2.0 or later via e-mail.

This CDRL details a specific deliverable, the 'Phase-Out Transition Plan,' required for the 'Readiness Based Sparing' system. Bidders need to understand this requirement, including its submission deadline, format, and distribution limitations, when preparing their proposals. It indicates a need for a plan to transition out of the current system or contract.

Form / Attachment / Pricing Sheet

This document is a Contract Data Requirements List (CDRL) detailing a specific data item required under a contract. It outlines the requirements for a "Contractor Status Report" related to "Readiness Based Sparing" (RBS) and associated modeling systems.

• Data Item Number: DI-MGMT-81991(T)
• Title: Contractor Status Report
• System/Item: Readiness Based Sparing
• Contract Reference: PWS
• Frequency: Monthly
• First Submission: 45 Days After Contract Award
• Subsequent Submissions: 10th of each month after the first submission.
• Reporting Requirements: The report must include the RBS modeling System of Record, Cost/Efficiency Curve of the chosen spares package, and the RBS modeling System of Record Monte Carlo simulation software operational availability calculation. Overall effort and status of models must be summarized.
• Distribution: Authorized only for military and civilian employees of the DoD or U.S. DoD contractors/grantees.
• Format: MS Excel, Word, Adobe Acrobat PDF 2.0 or later, OPUS (.opi) and/or SIMLOX (.sxi) emailed.

This CDRL specifies a required monthly report for contractors involved with Readiness Based Sparing. Bidders should note the detailed content requirements for the status report, including specific modeling systems and calculations, as well as the required submission format and distribution limitations. This information is crucial for understanding post-award reporting obligations.

Form / Attachment / Pricing Sheet

This document is a Contract Data Requirements List (CDRL) detailing a specific data item required for the "Readiness Based Sparing" system. It outlines the requirements for a "Proposed Spare Parts List" (Data Item No. A001).

• Data Item Title: Proposed Spare Parts List
• Authority: DI-PSSS-80134B(T) (tailored)
• Format Requirements: MS Excel for analysis, OPUS (.opi) and SIMLOX (.sxi) for preliminary RBS model input files. The report must separate candidacy lists, input files, and results.
• Content Requirements: Includes Nomenclature, Cognizance Code, NIIN, Federal Supply Class Code, Quantity per Application (QPA), Ordinance Alteration Quantity Adjustment Code, Mission Essential Code, Source, Maintenance, and Recoverability (SM&R) coding, Acquisition Advise Code, Best Replacement Factor, Allowance Override Designator Code, Allowance Override Quantity Code, reliability block diagrams (RBD), optimization execution dates, and target performance metrics.
• Explanatory Narrative: Must include system nomenclature, workbook descriptions, model notes, assumptions, data sources, logistical delay times, SM&R coding, thresholds, operational profile, RBD source, POC information, and initial model run date.
• Frequency: Monthly
• First Submission: 45 Days After Contract Award
• Subsequent Submissions: 10 Days After Contract Award (monthly thereafter)
• Distribution: Authorized for military, civilian DoD employees, and contractors performing specific jobs under contract. Distribution Statement D.
• Electronic Media: MS Excel, OPUS (.opi), SIMLOX (.sxi), and Adobe Acrobat PDF format 2.0 or later via email.

This CDRL specifies a critical data deliverable for the opportunity. Bidders must understand the detailed requirements for the "Proposed Spare Parts List," including the specific data elements, formatting, analysis tools, and submission schedule. This information is crucial for accurately estimating the effort and resources required to fulfill this contractual obligation.

Form / Attachment / Pricing Sheet

This document is Attachment 6, a Cost Proposal Spreadsheet, for Solicitation No. N6572626R3000. It is designed for prime offerors to detail their proposed costs, including labor, indirect costs, fees, and other direct costs (ODCs).

• Cost Elements: Includes Prime Contractor Labor Cost (Direct and Indirect), Subcontractor Labor Cost, Fixed Fee, and Other Direct Costs (ODCs).
• Labor Breakdown: Requires categorization by Company Labor Category and eCRAFT Labor Category, with fields for Hours, Amount, and Rate for each year of the contract (Base, Option Years 1-4).
• Subcontractor Costs: Specific sections for subcontractor proposed costs, pass-through analysis, and prime contractor fee on subcontractor price.
• Fee Analysis: Details for calculating prime contractor fee on labor and subcontractor costs, with a note on how it's treated in Section H and Section B of the solicitation.
• Pass Through Analysis: Outlines the calculation of pass-through amounts and compares them to the maximum allowed by the SeaPort-e IDIQ Contract (0.08).
• Fields for Offeror Information: Includes placeholders for Prime Offeror Name, Subcontractor Name, and DCAA Point of Contact Information.

This spreadsheet is critical for bidders to accurately calculate and present their proposed costs in response to the solicitation. It dictates the format and detail required for cost proposals, including labor rates, hours, indirect cost calculations, subcontractor costs, and fee structures. Bidders must carefully complete this spreadsheet to comply with solicitation requirements and ensure their pricing is competitive and compliant with contract limitations on pass-through costs and fees.

Form / Attachment / Pricing Sheet

This document is Attachment 5, "Past Performance Reference." It serves as a template for offerors to provide details about their past performance on relevant contracts or task orders. This information is crucial for the government to assess the offeror's ability to successfully perform the work described in the solicitation's PWS.

• Company Name, CAGE Code, UEI: Identifiers for the offeror.
• Program Name, Contract/Task Order Number: Details of the past performance reference.
• Program Manager, Contracting Officer, Contracting Officer’s Representative: Key personnel involved.
• Contract Type, Period of Performance, Total Value of Award: Financial and temporal aspects of the reference.
• Offeror's Description: A section for the offeror to explain the relevance of the past performance, detailing similarities in scope and complexity to the current solicitation's PWS.
• Required Documentation: Offerors must provide a copy of the contract or task order, including the relevant SOW/PWS, for each reference.

Offerors must complete this form and provide supporting documentation for each past performance reference. Failure to provide the required documentation may negatively impact the government's ability to evaluate the relevancy of the past performance. Refer to Section M of the solicitation for detailed evaluation criteria regarding past performance.

Form / Attachment / Pricing Sheet

This document, "Attachment 3 - Staffing Plan," is a template provided for offerors to detail their proposed staffing for Solicitation # N6572626R3000. It outlines the required information for a comprehensive staffing plan.

• Company Name: To be provided by the offeror.
• Staffing Details Table: Requires information on each proposed employee or role, including:
  • Name (prefaced with 'Contingent -' or 'Key -', or 'TBD' for non-key positions)
  • Employer
  • Company Labor Category
  • eCraft Labor Category
  • PWS Task Area Supported
  • Location
  • Labor Hours Proposed (Base Year through Option Year 4)
  • % of Total Time Dedicated to Contract
  • Years of Relevant Experience
  • Highest Education Degree Attained
  • Degree Area
  • Security Clearance Level
  • Citizenship
  • Certifications
  • Notes
• Sorting Instructions: Information must be sorted first by "Task Area" and then by "Labor Category."
• Use of 'TBD': Allowed for non-key positions without identified personnel, and potentially for surge or special study CLINs/SLINs.

This attachment is crucial for bidders to demonstrate their capability to meet the staffing requirements of the contract. Offerors must accurately complete this template to detail their proposed workforce, including experience, education, security clearances, and labor hour allocation across different task areas and labor categories. Failure to provide this information in the specified format may impact proposal evaluation.

Form / Attachment / Pricing Sheet

This document is the Quality Assurance Surveillance Plan (QASP) for the "NAVAL SEA LOGISTICS CENTER (NAVSEALOGCEN) READINESS BASED SPARING (RBS) SERVICES PERFORMANCE WORK STATEMENT." It outlines the systematic methods the Naval Sea Logistics Center will use to monitor contractor performance and ensure required performance standards and service levels are met.

• Roles and Responsibilities: Defines the roles of the Contracting Officer (KO) and Contracting Officer's Representative (COR).
• Performance Monitoring: Details methodologies including surveillance techniques (random monitoring, 100% inspection, periodic inspection), customer feedback mechanisms, and acceptable quality levels (AQLs).
• Quality Assurance Documentation: Describes the performance management feedback loop and the use of monitoring forms (Attachments 1, 2, and 3).
• Analysis and Reporting: Outlines how performance will be determined, reported, and reviewed, including monthly reports and in-depth reviews.
• Other Direct Costs (ODCS): Specifies procedures for monitoring ODCS if they exceed certain thresholds.
• Attachments: Includes a Performance Requirements Summary, a Sample Quality Assurance Monitoring Form, and a Customer Complaint Investigation Form.

This QASP details how the government will measure and evaluate the contractor's performance against the requirements defined in the PWS. Bidders should review this document to understand the government's expectations for quality, timeliness, responsiveness, and overall performance, as well as the methods used for surveillance and assessment. This will help in formulating a proposal that addresses these performance metrics and in understanding the oversight process during contract execution.

Form / Attachment / Pricing Sheet

This document is a DD Form 254, Contract Security Classification Specification. It provides security requirements for a contract, including facility clearance levels, safeguarding of classified information, and access to various types of sensitive information. It is used for solicitation purposes and must be returned to NAVSEALOGCEN SECURITY with contract details upon award.

• Facility Security Clearance (FCL): Specifies the required level of clearance for contractor facilities (e.g., Secret).
• Safeguarding of Classified Information: Outlines the level of safeguarding required at the contractor facility.
• Contract Information: Includes fields for Prime Contract Number, Solicitation Number (N6572626R3000), and Due Date.
• Access Requirements: Details the types of information the contractor will require access to, such as COMSEC, National Intelligence Information, Controlled Unclassified Information (CUI), and access to DoN IT systems.
• Performance Requirements: Specifies actions the contractor will undertake, including receiving, storing, and generating classified information or material, fabricating/modifying/storing classified hardware, and performing services.
• Security Guidance: Provides specific instructions regarding CUI, OPSEC, and the handling of critical information.
• Points of Contact: Lists government and contractor points of contact for security-related matters.

This form is critical for bidders to understand the security obligations and requirements associated with the contract. It details the necessary security clearances, handling procedures for classified and controlled unclassified information, and operational security (OPSEC) measures. Bidders must ensure they can meet these security requirements to be eligible for award. The solicitation number and due date are also provided.

Form / Attachment / Pricing Sheet

This document, Appendix C: Table of Deliverables, outlines the specific deliverables required under the contract, their corresponding Contract Data Requirements List (CDRL) identifiers, the relevant sections of the Performance Work Statement (PWS) they relate to, and their submission timelines.

• CDRL Identifiers: A001 through A006.
• Deliverables: Proposed Spare Parts Lists, Contractor Status Report, Contractor's Data Management Plan (CDMP), Quality Assurance Program Plan (QAPP), Phase-Out Transition Plan, and Government Property (GP) Inventory Report.
• PWS Paragraphs: References to specific sections within the PWS that detail each deliverable.
• Submission Requirements: Specifies when each deliverable is due, including initial submission deadlines after contract award and subsequent submission frequencies.

This table is crucial for bidders to understand the specific reporting and planning requirements that will be imposed upon contract award. It details the types of documentation and reports that must be submitted, along with their deadlines, which will impact resource allocation and project management planning. Bidders should pay close attention to the submission timelines for each deliverable to ensure compliance.

Solicitation / RFP / RFQ

This solicitation, N6572626R3000, is for Readiness Based Sparing (RBS) Modeling services to support the Naval Sea Logistics Center (NAVSEALOGCEN) in providing life-cycle logistics support solutions for US Naval systems. The objective is to procure RBS modeling services to aid in executing NAVSEALOGCEN's mission.

• Provide subject matter technical expertise in the development of RBS models using OPUS SUITE [OPUS and SIMLOX].

• Execute and deliver RBS models to support a system's development and sustainment throughout its lifecycle using the Navy Common Readiness Model (NCRM).

• Provide model results to NAVSEALOGCEN and stakeholders.

• Provide support to NAVSEALOGCEN for the Maritime Allowance RBS Re-Provisioning and Change Review Board (MARRC-RB) package submission.

• Provide monthly customer progress reports.

• All contractor personnel will require a Secret clearance.

• Contract Type: Cost Plus Fixed Fee (as indicated in Section L).

• Period of Performance: Base Year (01 Jun 2026 - 31 May 2027) with four Option Years.

• Estimated Value: Not explicitly stated in the provided sections.

• Proposals must be submitted through the PIEE Solicitation Module by the solicitation closing date and time.

• Evaluation will be based on Technical (Factor 1), Past Performance (Factor 2), and Cost Proposal (Factor 3).

• Factor 1 is more important than Factor 2. Factors 1 and 2 combined are significantly more important than Factor 3.

• Key deadlines: Proposal submission by solicitation closing date and time; questions due 15 calendar days after issue date.

• This requirement is being solicited as a small business set-aside.

• NAICS code: 541330.

• Small business size standard: $47 million.

• The solicitation is 100% set aside for Women-Owned Small Businesses.

• Access to OPUS Suite software will be provided by NAVSEALOGCEN.

• Cybersecurity Maturity Model Certification (CMMC) Level 2 (Self) compliance is required effective November 10, 2025.