One (1) Computer Numerically Controlled (CNC) Horizontal Boring & Milling Machine

Solicitation / RFP / RFQ

This is an unrestricted, full and open solicitation for a firm-fixed price contract for a Computer Numerically Controlled (CNC) Horizontal Boring & Milling Machine, in accordance with Purchase Description VIBB 26-40-1005 dated February 02, 2025. The acquisition is being conducted under FAR Subpart 13.5.

• One (1) CNC Horizontal Boring & Milling Machine.

• Associated training, technical data, IUID tags, foundation, shipping, rigging, installation, and removal of existing equipment.

• Delivery is required within 355 days After Receipt of Order (ARO).

• Packaging must be in accordance with ASTM D3951.

• Contract Type: Firm-Fixed Price.

• Period of Performance: 355 calendar days ARO for all line items.

• Estimated Value: Not explicitly stated, but the solicitation number suggests a significant procurement.

• Proposals are due by June 08, 2026, at 04:00 PM local time.

• Award will be based on a Lowest Price Technically Acceptable (LPTA) source selection process.

• The government reserves the right not to make an award if it is not in the best interest of the government.

• Offers must be submitted in English and U.S. dollars.

• This is an unrestricted solicitation.

• A site visit is scheduled for May 19, 2025, at 08:30 a.m. PST at Fleet Readiness Center Southwest, Naval Base Coronado.

• Vendors must contact Marley Soli at least ten (10) working days in advance to attend the site visit.

• Questions must be submitted in writing via email to the Contracting Officer or Designee within ten (10) days after the site visit.

• Offerors must be registered in SAM.gov.

• The offeror's proposed offer is valid for 120 days from the closing date of the solicitation.

Solicitation

This document is a purchase description for the acquisition of a new Computer Numerically Controlled (CNC) Horizontal Boring & Milling Machine. The contractor will be responsible for the complete removal of existing equipment, installation of new equipment, training personnel, rigging, quality assurance, and providing a turn-key system at FRCSW North Island, CA. This machine will replace an existing HS6R Boring-Milling machine and will be located in the Beryllium Copper Shop.

• New, commercially available CNC Horizontal Boring & Milling Machine.

• Machine must include all components, parts, and features to meet performance requirements.

• Parts subject to wear, breakage, or distortion must be accessible for adjustment, replacement, and repair.

• Measuring and indicating devices must be graduated in U.S. customary units; electronic systems demonstrating switching capability are acceptable.

• Controls (electrical, mechanical, hydraulic, pneumatic) must be conveniently located.

• Safety and Health Requirements: Compliance with OSHA 29 CFR 1910 and OPNAV 5100.23G or equivalent standards.

• Audible noise level must not exceed 84 decibels (dB) at the operator's work position or 3 feet from the equipment.

• Hazardous Material Exclusions: Must be free of known hazardous materials (e.g., asbestos, mercury, lithium, PCBs). Class I Ozone Depleting Substances are prohibited.

• Lubrication: Proper lubrication means required, with accessible oil holes, grease fittings, and filler caps. Lubrication data must be provided.

• Replacement Parts: Must be manufactured to definite dimensions and tolerances, and be interchangeable without modification.

• Construction: Must be new, without defects, and free of repairs. Structure must withstand maximum forces without distortion.

• Components: Includes base, table (70 in. x 50 in. rotary table, 3,000 lbs. workpiece load capacity), column, and axes actuated by closed-loop servo mechanisms.

• Coolant System: Flood-type with 150-gallon capacity, 100 psi flood pressure, 200 psi through-spindle pressure, splash guard, and coolant gun.

• Electrical System: Conforms to NFPA 79 or equivalent standards. Must be tolerant of +/- 10% voltage fluctuation from the 480V, 3-phase, 60Hz, 125 Amp source power. Includes a single disconnect device with lockout capability.

• CNC Features: Standard CNC control with programmable automatic control, synchronous and independent axis movement, MDI, interpolation, part program editing, storage, diagnostics, and automatic shutdown on fault conditions.

• Motors: Rated for continuous duty, 60-Hz operation, drip-proof enclosure, conforming to NEMA MG 1 or equivalent standards.

• Work Light: Provided with protective shield.

• Hour Meter: Non-resetting type, displaying accumulated operating time.

• Machine Specifications: Detailed in Table I, including axes travel (X: 72 in., Y: 60 in., Z: 53 in., W: 24 in.), spindle speed range (60-2,000 rpm), automatic tool changer (32 capacity), CAT 50 tool holder, and footprint (29.5 ft L x 26 ft W x 18 ft H).

• Alignment and Accuracy Tolerances: Measured per ISO 10791-1.

• Standard and Additional Tooling/Equipment: Includes long type angle head, U-axis head, chip conveyor, LED cabinet lighting, manual pulse generator, detachable table enclosure, and tooling pre-setter.

• Marking: Instruments, control panels, and plates must be in English, engraved/etched/embossed, and corrosion-resistant.

• Technical Data: Three hard copies and one electronic copy (CD) of technical data, including operation, maintenance, and spare parts list.

• Plan of Action and Milestones (POA&M): To be provided within 30 days after contract award.

• Acceptance Test Plan (ATP): To be prepared and submitted within 30 days after contract award.

• Installation: Contractor responsible for installation, including foundation, anchor bolts, leveling screws, and related hardware. Facility operating hours are 6:00 am - 2:30 pm, Monday-Friday. Maximum allowable floor space is 29.5 ft x 26 ft.

• Foundation: Contractor to provide a new foundation, including removal of existing foundation and excavation. Secondary containment and epoxy floor required.

• Installation/Foundation Drawings: Preliminary submission within 60 working days of contract, final submission within 60 calendar days of preliminary drawing acceptance.

• Equipment Removal: Contractor responsible for removing the existing HS6R Haas Boring-Milling Machine and providing necessary foundation and installation.

• Rigging: Contractor responsible for all rigging, installation, anchoring, and leveling.

• Training: Four operators to receive specialized training for 4 consecutive 8-hour workdays.

• Maintenance Training: Manuals to cover system drawings, troubleshooting, repair, maintenance, adjustments, and isolation procedures.

• Quality Assurance: Contractor responsible for all inspection requirements, including contract quality assurance inspection (Origin) and final inspection/acceptance test (Destination).

• Contract type: Not specified in this document.

• Period of Performance: Not specified in this document.

• Estimated Value: Not specified in this document.

• Quotes must be clear, concise, and provide sufficient detail for evaluation.

• Offerors must indicate compliance or exception to technical requirements using EXCEEDS, COMPLY, or EXCEPTION TO.

• Descriptive literature is required to establish product details.

• Past performance data is required, including a questionnaire sent to five references.

• Pricing support (two commercial invoices) is requested.

• Source Selection Process: Lowest Price Technically Acceptable (LPTA).

• Technical Review Rating: Acceptable or Unacceptable.

• Past Performance Rating: Acceptable or Unacceptable.

• Price Reasonableness/Support will be evaluated.

• Notification: Contractor to notify PCO 15 business days in advance for origin inspection and 15 business days for destination inspection/acceptance.

• Not specified in this document.

• Applicable documents include Federal, Military, and Non-Government standards (e.g., FED-STD, OSHA, ISO, ANSI, NEMA, NFPA, AGMA, SAE).

• Order of Precedence: This document takes precedence over cited references in case of conflict.

• Acronyms are defined as needed.

• Installation location is BERYLLIUM SHOP 97408, B472.

• Facility information brochure for FRCSW is included, detailing access, safety, and points of contact.

Solicitation / RFP / RFQ

This is an unrestricted, firm-fixed-price solicitation for a Computer Numerically Controlled (CNC) Horizontal Boring & Milling Machine, in accordance with Purchase Description VIBB 26-40-1005 dated February 02, 2025. The acquisition is being conducted under FAR Subpart 13.5. The award will be based on a Lowest Price Technically Acceptable (LPTA) source selection process. The government reserves the right not to make an award if it is not in the best interest of the government.

• One (1) Computer Numerically Controlled (CNC) Horizontal Boring & Milling Machine.

• The machine must be new; surplus items and prototypes are not acceptable.

• Associated items include IPE Milling Equipment, IPE Training, IPE Technical Data, IPE IUID Tag, IPE Foundation, Removal of Existing Equipment, IPE Shipping, IPE Rigging, and IPE Installation.

• Delivery is required within 355 days After Receipt of Order (ARO).

• Contract Type: Firm-Fixed-Price.

• Period of Performance: 355 calendar days ARO for all line items.

• Estimated Value: Not explicitly stated, but the solicitation is for commercial items.

• Offer Due Date: May 25, 2026, 04:00 PM Local Time.

• Proposals must be submitted in English and U.S. dollars.

• Evaluation will be based on conformance to instructions and LPTA.

• Site Visit: Scheduled for Tuesday, May 19, 2025, at 08:30 a.m./PST at Fleet Readiness Center Southwest, Naval Base Coronado.

• Questions must be submitted in writing via email within ten (10) days after the site visit.

• Offers must be signed and dated and submitted to the office specified in the solicitation by the closing date and time.

• This is an Unrestricted, Full and Open solicitation.

• NAICS Code: 333515, Size Standard: 500 employees.

• The solicitation incorporates by reference FAR 52.212-1, 52.212-4, 52.212-3, and 52.212-5.

• Offerors must be registered in the System for Award Management (SAM).

• The offeror's proposed offer is valid for 120 days from the closing date of the solicitation.

• Packaging must be in accordance with ASTM D3951.

• Delivery hours are Monday through Thursday, 8:00 A.M. to 3:30 P.M. (excluding Federal Holidays).

Solicitation / RFP / RFQ

This is a combined synopsis and solicitation for the procurement of one (1) Computer Numerically Controlled (CNC) Horizontal Boring & Milling Machine. The solicitation will be issued by DLA Aviation Richmond.

• One (1) CNC Horizontal Boring & Milling Machine.

• Complete technical data package (VIBB 26-40-1005) including minimum requirements for the machine, training, technical data, IUID tags, shipping, foundation, removal of existing equipment, rigging, and installation.

• Contract Type: Firm, Fixed Price.

• Award will be made under FAR 13.5 procedures.

• FOB: Destination.

• Inspection: Origin/Acceptance: Destination.

• Solicitation Issue Date: April 24, 2026.

• Solicitation Closing Date: June 8, 2026.

• Submission Instructions: Email the solicitation package, compliance statement, and descriptive literature to Christina Gibbs at Christina.Gibbs@dla.mil.

• A site visit is intended as part of the solicitation at Fleet Readiness Center- Southwest (FRCSW), Building 472, 1150 1st St., Coronado, CA 92118. Specific date/time will be available as part of the solicitation.

• Unrestricted with Other Than Full and Open Competition.

• NAICS Code: 333517

• FSC Code: 3408

• A copy of the solicitation will be available via the DLA DIBBS website: https://www.dibbs.bsm.dla.mil/Solicitations/

• Solicitations are in PDF format. Adobe Acrobat Reader is required for viewing.