Philpott Anchors and Instrumentation Construction

Solicitation / RFP / RFQ

This solicitation details "Ready to Advertise Specifications" for the Philpott Dam Anchors and Instrumentation Construction project. The US Army Corps of Engineers – Wilmington District is procuring the installation of spillway anchors, automated anchor load sensors, inclinometers, automation of crack gauges, and piezometers at Philpott Dam, Henry and Franklin Counties, Virginia.

• Installation of spillway anchors and automated anchor load sensors.

• Installation of inclinometers in monoliths 9 and 13.

• Automation of crack gauges and piezometers.

• Related incidental work.

• Compliance with EM 385-1-1 (Safety and Occupational Health Requirements), March 2024 edition.

• Comprehensive environmental protection requirements, including an Environmental Protection Plan (EPP), waste management (minimum 60% diversion by weight), pollution control, and stormwater management.

• Detailed specifications for various construction activities including clearing and grubbing, spillway anchors, seeding, instrumentation and performance monitoring, concrete rehabilitation, miscellaneous cast-in-place concrete, miscellaneous metal fabrications, and interior electrical distribution systems.

• Closeout submittals including O&M data packages.

• Solicitation No.: W912PM26RA004

• Contract No.: W912PM26XXXX

• Task Order No.: W912PM-23-F-0008

This document primarily contains technical specifications. Proposal submission and evaluation criteria are not detailed herein but would be found in the full solicitation package.

No specific set-aside or eligibility requirements are detailed in this document.

• References the Water Control Plan for Philpott Lake (June 1992).
• Includes detailed submittal requirements for various project aspects, such as a Construction Waste Management Plan (due within 45 days of award), Pesticide Application Plan, and instrumentation data.
• Requires adherence to numerous standards (e.g., DODI, ASTM, PTI, ACI, USACE, VDOT).

Solicitation / RFP / RFQ

This solicitation, W912PM26RA004, is for the Philpott Dam Anchors and Instrumentation Construction project located in Philpott, Virginia. The estimated magnitude of construction is between $5,000,000.00 and $10,000,000.00. This is an unrestricted procurement.

The solicitation details various construction tasks including:

• Mobilization

• Inclinometer core drilling and casing installation

• Inclinometer Sensor installation

• Vibrating Wire Piezometer installation

• Pneumatic Piezometer Conversion

• Automated Crack Meter Installation

• Anchor Vibrating Wire Load Cell Installation

• Anchor Electromagnetic Sensor Installation

• Electrical Panelboard Installation

• RMU Installation

• RIO Cabinet Installation

• Drilling in Concrete for Spillway Anchors

• Spillway Anchors

• Performance Test

• Water Tightness Test

• Regrout for Anchors

• Redrill Grout Holes

• Demobilization

• Performance and Payment Bonds

• Contract Type: Firm Fixed Price

• Period of Performance: 365 calendar days from Notice to Proceed.

• Estimated Value: $5,000,000.00 - $10,000,000.00

• Proposals must be submitted electronically per Enclosure 3: Instructions to Offerors.

• Hand-carried proposals and other forms of electronic submission (CD-ROM, facsimile) are not authorized.

• Return Section 00 45 00 Representations and Certifications with proposal.

• Offerors must submit proposals electronically by 09 JUN 2026, 01:00 PM local time.

• Offers must be valid for at least 60 calendar days after the offer due date.

• Proposal evaluation will be in accordance with Enclosure 3 - Instruction to Offerors.

• Unrestricted procurement.

• HUBZone Price Evaluation Preference is applicable.

• Solicitation/Technical Inquiries must be submitted via ProjNet (Bidder Inquiry module). Inquiries must be submitted no later than ten (10) calendar days prior to receipt of proposals.

• A site visit is scheduled for Tuesday, 5 May 2026, at 8:00 AM EST. RSVP required by 1 May 2026.

• All contractors must register in the System for Award Management (SAM) database.

• Performance and Payment Bonds are required.

• A bid guarantee is required.

Form / Attachment / Pricing Sheet

This document provides detailed instructions for the preparation and submission of proposals for the solicitation.

• Submission Method: Electronic via email only; no hard copies accepted.
• Points of Contact: Contracting Officer Troy D. Small (troy.d.small@usace.army.mil) and Contract Specialist Jenifer Garland (jenifer.m.garland@usace.army.mil).
• Deadline: Proposals are due by the time and date specified in Block 13 of the SF 1442. Late submissions will not be considered.
• Format: Adobe PDF, 8.5" x 11" pages, minimum 10-point font.
• File Naming Convention: W912PM26RA004_[COMPANYNAME]VOLUME_I and W912PM26RA004[COMPANYNAME]_VOLUME_II.
• Page Limits: Volume I and Volume II are each limited to 150 pages. Excess pages will not be evaluated.
• Bid Bond: A Bid Bond (SF 24) must be submitted electronically in Volume I, Tab G, by the proposal due date.
• Prohibitions: Do not include pricing information in Volume II. Do not include exceptions to solicitation terms and conditions.

This document is critical for bidders to understand the specific requirements for preparing and submitting their proposals. Adhering to these instructions regarding format, naming conventions, page limits, and submission method is essential for a compliant and evaluable submission. Failure to comply may result in a proposal being deemed non-responsive or unacceptable.

Form / Attachment / Pricing Sheet

This document, "Attachment 1: Proposal Data Sheet," is a form required for offerors responding to Solicitation Number W912PM26RA004 for the Philpott Anchors and Instrumentation Construction project. It is used to collect essential information about the offeror and their authorized representatives.

• Offeror Information: Requires the Offeror's Legal Business Name, Address, Phone Number, Fax Number, Email Address, Unique Entity ID (UEID), CAGE Code, and Tax ID Number.
• Authorized Negotiator(s): Collects the Full Name, Title, Phone Number, and Email Address of individuals authorized to negotiate on behalf of the Offeror.
• Statement of Agreement: A certification that the Offeror agrees with all terms, conditions, and provisions of the solicitation.
• Joint Venture / Team Member Information: A section for basic identification of joint venture partners or major subcontractors, with a note that detailed information must be provided elsewhere.
• Certification: A signature block for the individual authorized to sign the proposal, including their Printed Name, Title, and Date.

This form must be completed accurately and submitted as part of the proposal. It provides the government with necessary contact and identification details for the offeror and their negotiating team, and serves as a formal agreement to the solicitation's terms. Failure to complete this form correctly may impact the proposal's acceptability.

Other / Unclassified

This document is a General Decision Number (VA20260025) issued by the U.S. Department of Labor, Wage and Hour Division, effective January 2, 2026. It supersedes a previous decision (VA20250025) and establishes prevailing wage rates for heavy construction projects, specifically including sewer and water lines, within specified counties in Virginia. The rates were revised pursuant to 29 CFR 1.6(c)(1) on December 13, 2024.

This document provides the minimum wage rates for various labor classifications (e.g., Carpenter, Electrician, Laborers, Power Equipment Operators, Truck Drivers) that must be paid on contracts covered by this wage determination. Bidders must use these rates when preparing their proposals and ensure compliance during contract performance. The document also outlines Executive Orders related to paid sick leave (EO 13706) and minimum wage (EO 13658) for federal contractors, and provides information on how to identify different types of wage rate identifiers and the process for appealing wage determinations.

Other / Unclassified

This document is a "General Decision Number" for wage rates applicable to heavy construction projects, specifically including sewer and water lines, in various counties and independent cities within Virginia. It provides prevailing wage rates and fringe benefits for different labor classifications, such as Crane Operators, Carpenters, Cement Masons, Electricians, Laborers, Power Equipment Operators, and Truck Drivers. The document also includes information on Executive Orders related to paid sick leave (EO 13706) and minimum wage for federal contractors (EO 13658), as well as details on how wage determination identifiers are structured and the process for appealing wage determinations.

This document is relevant to bidders as it establishes the minimum prevailing wage rates that must be paid to laborers and mechanics employed on covered construction projects. Understanding these rates is crucial for accurate cost estimation and ensuring compliance with labor standards when preparing bids for opportunities that fall under this wage determination. It also informs bidders about potential requirements related to paid sick leave and minimum wage for federal contractors.

Solicitation / RFP / RFQ

This is a "Ready to Advertise" (RTA) solicitation package for the Philpott Dam Anchors and Instrumentation Construction project, being procured by the U.S. Army Corps of Engineers, Wilmington District.

The project involves construction related to anchors and instrumentation at Philpott Dam. Detailed scope of work, deliverables, and technical requirements are specified in the attached drawings and specifications.

• Solicitation Number: W912-PM-26-RA004
• Contract Number: W912PM-26-X-00XX
• Issue Date: March 2026
• Period of Performance: Implied to commence after award in March 2026.

Detailed submission instructions and evaluation criteria will be provided with the formal solicitation. Key deadlines are not detailed in this RTA package.

No specific set-aside or eligibility requirements are mentioned in this RTA package.

• The package includes numerous drawings (G-000 through C-400) detailing general information, geotechnical instrumentation, civil plans, access routes, laydown areas, and site layouts.
• The project is located in Henry and Franklin Counties, Virginia.
• The "Locked Drawings" (S-Series, E-Series, EP-Series, R-Series) are critical for bidders to understand structural elements, electrical systems, instrumentation, power distribution, and general dam details. These are essential for accurate bidding, material procurement, and construction planning.
• The solicitation is a result of work performed by the U.S. Army Corps of Engineers and A-E firms, including Black & Veatch Special Projects Corp. and Atriax.

Solicitation / RFP / RFQ

This document serves as a "Ready to Advertise" (RTA) cover sheet and provides "Unlocked Drawings" for the Philpott Dam Anchors and Instrumentation Construction project. It indicates the solicitation is prepared for release and offers detailed technical drawings essential for bidders to understand the project scope.

• Structural Drawings (S-series): Detail spillway monolith elevations, plans of new spillway anchors, and cross-sections of anchor components and installation.

• Electrical Drawings (E-series): Illustrate electrical and instrumentation plans, new work sections, powerhouse plans, and demolition plans, including details on panelboards, conduits, wiring, and instrumentation.

• Electrical Interface and Mounting Details (EI-series): Provide specific details on antenna installations, RIO cabinet mounting, and lightning protection systems.

• Electrical Details (E1501, E1502): Show installation details for embedded cables, conduit troughs, and anchor load cell/sensor cable installations.

• One-Line Diagrams (EP-series): Depict electrical power distribution for demolition and new work, including panel schedules.

• Reference Drawings (R-series): Provide general dam plan, elevations, and sections.

• Solicitation Number: W912-PM-26-RA004

• Issue Date: March 2026

Details regarding proposal submission and evaluation criteria will be provided in the full solicitation package. Bidders must thoroughly review the provided drawings to accurately assess the scope of work and develop precise cost estimates.

No specific eligibility or set-aside information is present in these documents.

The project is located in Henry and Franklin Counties, Virginia. The drawings cover General, Geotechnical, Civil, Structural, and Electrical/Instrumentation/Controls disciplines.