Storage Aid System Pittsburgh ANGB

Amendment / Modification

This addendum provides supplemental information and instructions related to the following clauses and solicitation provisions:

• FAR 52.212-1 Instructions to Offerors – Commercial Items (Aug 2018)

• FAR 52.212-2 Evaluation--Commercial Items (Oct 2014)

• FAR 52.212-1 Instructions to Offerors – Commercial Items:

  • Submission of offers: Offers must be submitted electronically via the Procurement Integrated Enterprise Environment (PIEE) at https://piee.eb.mil/. Three documents are required: one electronic cost proposal and two technical proposals. One technical proposal must be "sanitized" (no company name or pricing). Proposals via email or DoD SAFE will not be accepted. Specific naming conventions for documents are provided. A cover page is required for each section instead of tabs.
  • Period for acceptance of offers: Offerors agree to hold prices firm for 90 calendar days from the offer receipt date.
  • Late Submissions: Offers must be received by the specified date and time (3:00 PM EST). Late offers are generally not considered unless received before award and accepting them would not unduly delay the acquisition. Late modifications making terms more favorable to the Government may be accepted.
  • Contract award: The Government intends to award without discussions, based on the offeror's best terms. The Government reserves the right to conduct discussions if necessary and may reject any or all offers.
  • Debriefings: Information to be disclosed during post-award debriefings is outlined.
  • Proposal Checklist and Summary Pricing Sheet: Offerors must comply with instructions and submit this as part of the price proposal.

• FAR 52.212-2 Evaluation--Commercial Items:

  • Evaluation Method: The acquisition will use the Lowest Price Technically Acceptable (LPTA) source selection method.
  • Evaluation Factors: Offers will be evaluated on TECHNICAL ACCEPTABILITY and PRICE.
  • Interchanges: The Government intends to award without interchanges but reserves the right to conduct them.
  • Unawardable Proposals: Proposals failing to comply with FAR 52.212-1 instructions, the addendum, or the Proposal Checklist and Summary Pricing Sheet may be considered unawardable.
  • Proposal Ranking: Proposals will be ranked by total evaluated price (TEP), with the two lowest-priced responsive proposals evaluated for technical acceptability first.
  • Technical Review: A technical review team will evaluate proposals on an acceptable/unacceptable basis for three subfactors: Technical Proposal Questionnaires (TPQs), Commercial Literature/Cut Sheets, and Proposed Schedule.
  • Price Evaluation: Total Evaluated Price (TEP) will be calculated. Prices will be evaluated for reasonableness and balance. Unbalanced pricing is grounds for rejection.

• Submission: Via PIEE, by 3:00 PM EST. Three documents required (cost proposal, sanitized technical, unsanitized technical). Specific naming conventions and cover pages are required.

• Evaluation: Lowest Price Technically Acceptable (LPTA). Factors are Technical Acceptability and Price. Technical proposals must be rated "Acceptable" in all subfactors. Price will be evaluated for reasonableness and balance.

Direct any questions to TSgt Jennifer Jensen (jennifer.jensen.10@us.af.mil) and Maggie Seid (margaret.seid@us.af.mil).

Form / Attachment / Pricing Sheet

This document is a "Notification of Compliance with Contract Insurance Requirements." It serves as a form for the contractor to acknowledge and confirm their understanding and adherence to the insurance requirements stipulated in the contract, as well as those outlined in FAR 28.307-2.

• Contractor's acknowledgment of reading and understanding contract insurance requirements.
• Confirmation that insurance will be maintained in specified amounts and types.
• Requirement for insurance policies to include an endorsement regarding cancellation notice periods (longer of state law or 30 days written notice to Contracting Officer).
• Confirmation of maintaining Workers' Compensation Insurance or a reciprocal agreement.
• Obligation to maintain and provide subcontractor proofs of insurance upon request.
• Fields for detailing the Insurance Company(s) (Name, Address, Policy #, Telephone #).
• Fields for Contractor information (Company Name, Address).
• Signature block for the contractor, including Typed Name and Title, Authorized Signature, and Date.

Bidders should use this form to document their compliance with insurance requirements. It outlines specific obligations regarding the types and duration of insurance coverage, as well as notification procedures for changes or cancellations. This form must be completed and submitted as part of the contractual obligations.

Form / Attachment / Pricing Sheet

This document is a Proposal Checklist for Request for Proposal FA8604-26-R-B011. It outlines the requirements for both the technical and price volumes of a proposal submission. It also includes a Summary Pricing Sheet.

Technical Volume Requirements:

• Submission format: Original plus one copy in PDF. One copy must be sanitized (no offeror name, pricing, or identifying features).
• No cost or pricing data in the technical proposal.
• Cover sheet requirements for both sanitized and unsanitized copies (solicitation number, project title, offeror name, address, UEI).
• Organization and bookmarking requirements for the technical proposal, including specific tabs for Cover Purchase Description and appendices.
• Completion of Technical Proposal Questionnaires (TPQs) is mandatory.
• Exceptions to government requirements must be detailed and are subject to government discretion.
• Commercial literature/cut sheets for equipment must be submitted (two electronic versions, marked).
• A proposed schedule adhering to Section F of the RFP, addressing data items, fabrication, shipping, installation, and testing, is required.

Price Volume Requirements:

• Prepared and submitted separately from the technical volume in PDF format.
• Cover sheet requirements similar to the technical volume.
• Point of contact and email address for correspondence.
• Statement of proposal validity for 90 days.
• Organization and bookmarking, including a Summary Pricing Sheet with CLIN prices and total proposed price.
• Completed, signed, and dated checklist must be included as a separate attachment.
• Signed RFP cover page (SF1449) and completed block 24 with total proposed price.
• Signed cover sheets of all amendments (SF30).
• Completed extended CLIN prices for all CLINs (except "Data" which is NSP).
• Completed and signed Insurance Certificate.
• SAM registration status and current Representations and Certifications (FAR 52.212-3).
• Small business set-aside considerations, including the Non-Manufacturer's Rule and Limitations on Subcontracting.

Summary Pricing Sheet: Lists CLINs for System Design Complete, Pallet Rack System, Cantilever Rack System, Fence System, ESD Shelving System, ESD Work Bench System, 240V Power System, Spill Containment Shelving System, Flammable Cabinet System, Corrosive Cabinet System, Pallet Spill Containment System, Modular Cabinets System, System Installation, Integration, and Quality Conformance Test, and System Data (NSP).

This checklist is critical for bidders to ensure their proposal meets all submission requirements for both technical and price volumes. Failure to comply with any item may result in the proposal being deemed non-responsive or receiving an unacceptable rating. The pricing sheet provides the structure for itemizing costs.

Solicitation / RFP / RFQ

This Purchase Description (PD) establishes the minimum performance, design, fabrication, installation, orientation, and test requirements for a storage aid system at Building 110, Pittsburgh ANGB, Pennsylvania. The work includes all equipment, materials, and labor for installation, testing, and adjustment, as well as providing on-the-job instructions to Government personnel.

• System Components: Mezzanine, Pallet Rack, Mobile Storage system, Rider Reach, Support Equipment.

• Performance: Hazardous noise levels not to exceed 85 dB(A) for 8 hours. Operates in temperatures from 0 to 120 degrees Fahrenheit with up to 99% relative humidity.

• Design & Fabrication: Must use standard, commercial components available for at least one year. Structural requirements must comply with state/local codes and seismic conditions (IBC, UFC 3-310-04). No Ozone Depleting Substances (ODS) to be used.

• Safety: Must comply with OSHA 29 CFR 1910 and 29 CFR 1926. Moving parts require guards per ANSI B11.19. Placards required for hazards and operating limits. Work areas must be kept clean.

• Protective Coatings: System surfaces require protection via painting, plating, or galvanizing, adhering to specific standards (ASTM A123, A153, B633).

• Welding: Must comply with AWS B2.1, D1.1, D14.1, and Z49.1. Fire protection measures are required during welding, cutting, and brazing operations, including permits and fire extinguishers.

• Documentation: Requires monthly management reports, shop drawings, equipment manuals, system checkout certificates, as-built drawings, and a spare parts list.

• Orientation: Contractor must provide operator and maintenance orientation for Government personnel.

• Warranty: One-year warranty after final acceptance.

• Acceptance Tests: System Checkout Test, Quality Conformance Test, and Reliability Demonstration Test must be successfully completed.

• Defect Classification: Critical, Major, and Minor defects will be classified, with Critical/Major defects causing rejection.

• Not specified in this document.

• The work shall be completed in accordance with this PD and Air Force Drawings NPT501-01 and NPT501-02.

• Applicable documents include various Air Force Instructions, OSHA standards, and industry standards (AISC, ANSI, ASTM, AWS, NEMA, NFPA, SAE, UFC).

Form / Attachment / Pricing Sheet

This document appears to be a floor plan or schematic related to the removal of pallet racks and potentially other items within Building 110 in Pittsburgh, PA, for the NPT501-02 project. It details the layout of the area, including "PALLET RACK TYPES TO BE REMOVED" and "MODULAR OFFICE" spaces.

• Layout: Depicts the arrangement of pallet racks (labeled by type A, B, C) and office spaces.
• Scope of Work Indication: Shows specific pallet rack types designated for removal.
• Project Information: Includes project name (NPT501-02), location (Building 110, Pittsburgh, PA), and sheet designation (S1 of S1).
• Revision Information: Contains dates and names associated with drafting and review.

This document is crucial for bidders to understand the physical scope of work, specifically the items to be removed and the general layout of the work area. It helps in assessing the labor, equipment, and time required for the demolition and removal tasks.

Other / Unclassified

This document lists DFARS (Defense Federal Acquisition Regulation Supplement) clauses that are included by reference. It is organized by "CD" (Class Deviation) numbers, followed by a list of specific DFARS clauses with their clause numbers and effective dates.

This document is relevant to potential bidders as it outlines specific regulatory clauses that will likely be incorporated into any resulting contract. Bidders should review these clauses to understand their obligations and compliance requirements, which may impact pricing, performance, and overall contract management. Key areas covered include:

• Compensation of Former DoD Officials (252.203-7000, 252.203-7002, 252.203-7005)
• Contractor Performance and Risk (252.204-7022, 252.204-7024, 252.204-7998)
• Item Identification and Valuation (252.211-7003)
• Prohibitions (252.223-7008, 252.255-7059, 252.225-7060)
• Trade and Sourcing Requirements (252.225-7001, 252.225-7012, 252.225-7048)
• Payment and Financial Reporting (252.232-7003, 252.232-7010)
• Contract Modifications and Administration (252.243-7002, 252.244-7998)
• Safety and Transportation (252.246-7003, 252.247-7023)

Solicitation / RFP / RFQ

This solicitation (FA860426RB011) is for the design, manufacture, delivery, installation, and integration of a Non-ACAT, Mechanized Materials Handling System at Pittsburgh ANGB, Pennsylvania, Building 110. The project is identified as CSN: NPT501.

The solicitation details multiple line items (CLINs) for various components and services, including:

• System Design (CLIN 0001)
• Mezzanine System (CLIN 0002)
• Pallet Rack Systems (Type A, B, C, D) (CLIN 0003)
• Mobile Storage System (CLIN 0004)
• Rider Reach Vehicle (CLIN 0005)
• Gravity Flow Through Rack Systems (CLIN 0006)
• Plastic Bins Systems (CLIN 0007)
• Pipe Storage Rack Systems (CLIN 0008)
• Demo and Removal of Existing Equipment (CLIN 0009)
• System Installation and Integration (CLIN 0010)
• System Reliability Demonstration Test (RDT) and Final Acceptance (CLIN 0011)
• System Data (CLIN 0012)

Requirements include design in accordance with specified Cover Purchase Descriptions (PD), appendices, and Air Force drawings. Deliverables include equipment, operation, and maintenance manuals, and illustrated parts breakdown.

• Contract Type: Not explicitly stated, but pricing arrangements for most CLINs are Firm Fixed Price.

• Period of Performance: Delivery schedules vary by CLIN, ranging from 45 to 240 Calendar Days from the Date of Award or completion of performance.

• Estimated Value: Not stated in the provided pages.

• Offer Due Date: 02 June 2026, 03:00 PM.

• Evaluation Factors: Technical Acceptability and Price. Past performance is not an evaluation factor.

• This acquisition is set aside 100% for Small Business.

• NAICS Code: 333922

• Size Standard: 500 employees

• The solicitation incorporates FAR clauses 52.212-1, 52.212-3, and 52.212-4 by reference.

• Payment instructions will be processed through Wide Area WorkFlow (WAWF).

• Inspection and Acceptance locations are specified for each CLIN, primarily at Building 110, Pittsburgh ANGB, PA.

• A list of attachments is provided, including Cover PD, Appendices A-E, Drawings, Contractor Information, Addendums, and Checklist Summary Pricing Sheet.

Form / Attachment / Pricing Sheet

This document, Appendix E, outlines the minimum performance, design, fabrication, installation, and test requirements for support equipment and services to be installed at Pittsburgh ANGB, Building 110. It details specific components, their characteristics, and requirements for their installation and removal.

• General Scope: Defines the overall requirements for support equipment and services.
• Applicable Documents: References other relevant documents, including Section 2 of the Cover PD and AF Drawings NPT501-01 and NPT501-02.
• Requirements:
  • System Description: Specifies components to be installed or carried out.
  • Characteristics: Details requirements for support equipment.
    • Configuration Requirements: Specifies location and configuration as per AF Drawing NPT501-01.
    • Structure and Installation:
      • Flow Through Rack: Requires 24 racks, same brand/color/material, steel with rust-resistant coating, lockable casters, and interface with plastic bins.
      • Plastic Bins: Requires 650 plastic containers (23.5" x 15.5" x 12"), weather-resistant polyurethane, interfacing with racks.
      • Pipe Rack: Requires 11 steel pipe racks, powder coated or painted, color specified by COTR.
  • Demo and Removal:
    • Modular Office: Removal of physical components, electrical elements, fire safety components, debris, and repair of damage.
    • Pallet Racks: Removal of existing pallet racks as detailed in AF Drawing NPT501-02.
    • Walls: Removal of existing non-load bearing walls and sanding of floors/walls as needed.
• Quality Assurance Provisions:
  • Inspections: System inspection to verify requirements are met during checkout and quality conformance tests.
  • Tests: Functional tests for Gravity Flow Through Rack and Pipe Rack, requiring them to be loaded to capacity for 24 hours without permanent deformation.

This appendix provides critical details for bidders regarding the specific equipment to be supplied and installed, including quantities, materials, dimensions, and installation locations. It also outlines the demolition and removal tasks required, as well as the quality assurance and testing procedures. Bidders must carefully review these requirements to accurately estimate costs, develop technical proposals, and ensure compliance with all specified standards and drawings.

Form / Attachment / Pricing Sheet

This document, Appendix A, outlines the minimum performance, design, fabrication, installation, and test requirements for a mezzanine to be constructed at Pittsburgh ANGB, Building 110. It specifies requirements in conjunction with the Cover Purchase Description (PD) and related Air Force drawings.

• General Scope: Defines the overall project for the mezzanine.
• Applicable Documents: Lists relevant ASTM, OSHA, and other standards.
• Requirements:
  • System Description: Provides elevated storage space, interfaces with forklift and pallet jack.
  • Characteristics: Includes configuration as per Drawing NPT501-01.
  • Structure and Installation: Details general requirements for load capacity (125 lbs/sq ft), freestanding design, pre-engineered components, seismic resistance, and deflection limits (L/360). Specifies requirements for columns, base plates, framing, decking (metal roof deck and composite flooring), and stairs.
  • Mezzanine Components: Includes detailed specifications for stairs, mezzanine railing, kickplates, pallet gates, and fire suppression systems.
  • Electrical: Specifies LED lighting requirements underneath the mezzanine (50 foot-candles).
  • Safety Features: Includes requirements for load capacity signs, no-step signs, and safety factors for structural members.
• Quality Assurance Provisions: Outlines inspection and testing procedures, including load testing and lighting verification.

This appendix provides critical technical specifications and requirements for the mezzanine construction. Bidders must review these details to understand the scope of work, materials, design standards, safety features, and quality assurance measures necessary to successfully bid on and execute this project.

Form / Attachment / Pricing Sheet

This document appears to be a drawing or schematic related to material handling and storage systems, specifically detailing "Storage Aid Systems" for Building 110 at Wright Patterson AFB. It outlines various types of racks and storage solutions.

• Rack Types: Details include "Gravity Flow Rack," "Pallet Rack Type C - Mobile Aisle," "Pallet Rack Type D - Mobile Aisle," and "Pipe Storage Rack." Specifications such as levels, weight capacity, and dimensions are indicated.
• Layout: Shows a proposed layout including "Mobile Aisle," "Office," and "Pipe Storage Area."
• Clearances: Notes on "Clear Height to Lowest Structure" and "Maintain 12' Aisle Clearance."
• Components: Mentions "Plastic Bins," "Shelving Inserts," and "Guide Rails."

This drawing provides critical visual and technical information about the proposed storage infrastructure. Bidders responding to an opportunity requiring the installation or provision of these systems would use this document to understand the physical requirements, dimensions, capacities, and layout of the storage solutions needed. It is essential for accurate proposal development, including material selection, configuration, and installation planning.

Form / Attachment / Pricing Sheet

This document, Appendix D - Rider Reach, establishes the minimum performance, design, fabrication, installation, and test requirements for one (1) Rider Reach at Pittsburgh ANGB, Building 110. It is intended to cover all equipment, materials, and labor necessary for the system's installation, in conjunction with the Cover Purchase Description (PD) and Air Force (AF) Drawings NPT501-01.

• Scope: Defines the requirements for the Rider Reach system.
• Applicable Documents: References Section 2 of the Cover PD.
• Requirements:
  • System Description: Must conform to ANSI B56.1 and interface with the pallet rack and cantilever per AF Drawing NPT501-01.
  • Characteristics:
    • General Requirements: Minimum rated load capacity (3,000 lbs at 24-inch centers), minimum power (24V), minimum operating time (8 hours), battery type (Lead Acid), operator type (Standing), lift height (14 ft), collapsed height (10 ft), fork dimensions (48 inches), minimum travel speeds (5 MPH no load, 3 MPH rated load), raising speed (50 ft/min rated load), lowering speed (95 ft/min rated load), and load stability.
    • Braking System: Mechanical and/or Electrical, with caster and drive application.
    • Operational Capabilities: Minimum reach distance (24 inches), minimum tilt (5 degrees up, 2 degrees down), minimum side shift (+/- 2 inches), non-marking wheels, and aisle operation capability (6-foot aisles with 48x48-inch pallet).
    • Safety Features & Indicators: Hour indicator, battery charge indicator, flashing lights, horn, working spotlight, operator compartment fan/light, dead man brake, and overload protection.
    • Charging Requirements: On-board charger compatibility (110V, 240V, or 208V) and compliance with NEMA IB 6-83 standards.
    • Training: In accordance with ANSI B56.1 standards.
• Quality Assurance Provisions: Includes inspections and tests to verify compliance with all requirements.

This appendix details the specific technical specifications and performance criteria for the Rider Reach equipment. Bidders must ensure their proposed equipment meets all listed requirements, including load capacity, dimensions, operational capabilities, safety features, and charging specifications. The quality assurance provisions outline the testing and inspection procedures that will be used to verify compliance, which bidders should consider in their planning and execution.

Form / Attachment / Pricing Sheet

This document, Appendix B for Pallet Rack, establishes the minimum performance, design, fabrication, installation, and test requirements for pallet rack types A, B, C, and D at Pittsburgh ANGB, Building 110. It covers all equipment, materials, and labor necessary for system installation, in accordance with the Cover Purchase Description (PD) and Air Force Drawing NPT501-01.

• Applicable Documents: RMI/ANSI MH16.1 Industrial Steel Storage Racks and RMI/ANSI MH26.2 Design and Testing of Welded Wire Rack Decking.
• System Description: Manufacturer must be R-Mark® certified.
• Characteristics:
  • Configuration: As shown on AF Drawing NPT501-01.
  • Uprights: Specific capacity, capable of supporting fully loaded bays without deformation, with tear drop openings on 2-inch increments.
  • Bearing Plates: Disperse load, minimum of 2 punched holes for 1½ inch anchor bolts.
  • Shelf Beams: Specific capacity, teardrop compatible connectors, attached safety lock, step type.
  • Row Spacers: 6-inch flue space, 2 spacers within 24 inches from top and bottom.
  • Leveling Shims: Equal length/width to bearing plate, max 5 per location, no slotted/welded.
  • Decking: R-Mark® compliant, galvanized, external waterfall, permanently attached support beams.
  • Anchoring: Rigid freestanding structure, installed per manufacturer's instructions.
  • Assembly: Must be straight and square; horizontal members level within 1/8 inch over 10 feet; vertical members plumb within 1/2 inch over 10 feet.
  • Capacity Labels: 8.5 X 11 inches.
  • Row Markers: Two card holders per section, capable of holding 8.5 X 11 inch labels, mounted between 7 and 10 feet from the floor.
  • Color: As specified by COTR.
• In-Rack Sprinkler System: Not required.
• Quality Assurance: Includes inspection and specific tests (load capacity, shelf-to-column safety lock, footplate anchoring).

This document details the specific technical requirements for the pallet racking system to be procured. Bidders must ensure their proposed solution meets all specified design, material, fabrication, installation, and testing criteria. Compliance with referenced drawings and standards is mandatory.

Form / Attachment / Pricing Sheet

This document, Appendix C, establishes the minimum performance, design, fabrication, installation, and test requirements for a mobile storage system at Pittsburgh ANGB, Building 110. It is intended to cover all equipment, materials, and labor necessary for the system's installation.

• System Description: Must conform to NPT501-01.
• Characteristics:
  • Operation: Each carriage requires a crank mechanism as shown on AF drawing NPT501-01.
  • Configuration: System location and configuration as shown on AF Drawing NPT501-01.
  • Structure and Installation: Details requirements for carriages (1,000 lbs/carriage foot capacity, <0.5% deflection), frames (aluminum or steel channel, welded/bolted, cross bracing), bumpers, stationary platforms, shelving sections (interface with pallet rack type C and D inserts), face panels (1/8" thick, cover full height/width), row identification, rails (load bearing grout, steel material), end stops, rail skirts, elevated flooring (Resindeck or equivalent, 1.5" thick, 75 lbs/sq ft capacity), and ramps (all access sides, <10% grade).
  • Drive Chain: Connects gear reduction sprockets from crank to drive shaft.
  • Bearings: Permanently lubricated, securely mounted, properly housed.
  • Wheels: Must not lose contact with rails.
  • Guidance System: Prevents dislodgement or derailment.
  • Safety Devices: Anti-movement lock, anti-tip device, system lock devices.
• Quality Assurance Provisions:
  • Inspections: System must meet requirements of sections 1, 2, and 3, and cover purchase description. Inspections are part of checkout and quality conformance tests.
  • Tests: Includes a 24-hour functional test, maximum load test (4+ hours), and anti-movement lock test.

This appendix details the specific technical requirements, design specifications, and quality assurance measures for the mobile storage system. Bidders must ensure their proposed solution meets all outlined criteria, including structural integrity, operational functionality, safety features, and testing protocols. It directly informs the design, fabrication, and installation aspects of any proposal.

Form / Attachment / Pricing Sheet

This document, titled "NPT501-Contractor Information," is a form used to gather essential details about the contractor's available services and resources for the opportunity. It helps the government understand the contractor's operational capabilities and limitations.

• Services Available: Details on work schedule (shifts, hours, days), availability of office, classroom, and staging space (including dimensions and locations), secured areas, and restroom access.
• Utilities Available: Information on electrical outlets (voltage, hertz, phase) and water availability, including location.
• Services Not Available: Explicitly states that government forklifts, tools, and equipment are not provided for contractor use. Also notes that government personnel will not assist with loading/unloading contractor equipment.
• Joint Occupancy: Outlines the requirement for the contractor to minimize interference with normal Air Force operations.
• Site Visit Information: Provides contact details (Name: CMSGT NICOLE BROWN, Phone: 412-776-7210) for arranging a site visit.

This form requires bidders to confirm their available resources and acknowledge limitations. It is crucial for bidders to accurately complete this form to demonstrate their capacity to meet the contract requirements and to understand what resources the government will not provide. The site visit information is also critical for potential bidders to gain a better understanding of the work environment.