PLATE,METAL

Solicitation / RFP / RFQ

This is a combined synopsis/solicitation for commercial items, prepared in accordance with FAR Part 12 and Simplified Acquisition Procedures (FAR 13). It serves as the only solicitation, and written solicitations will not be issued. The procurement is for steel alloy plates of various thicknesses (0.500", 0.750", 1.250") meeting specific NAVSEA technical publications and requirements.

• Item 0001: PLATE, 0.500" THICK, STEEL ALLOY GRADE HY-80, TYPE I

• Item 0003: PLATE, 0.750" THICK, STEEL ALLOY GRADE HY-80, TYPE II

• Item 0005: PLATE, 1.250" THICK, STEEL ALLOY GRADE HY-80, TYPE III

• All items require First Article Testing (FAT) per T9074-BD-GIB-010/0300 (REV2).

• Direct traceability to chemical analysis and mechanical property tests is required.

• Additional requirements include: Certificate of Conformance (COC), Chemical Analysis, Mechanical Properties Test, Hardness Test, Non-Destructive Test (NDT), Visual Inspection, Charpy-V Notch Test, and UT Testing reports.

• Items 0002, 0004, and 0006 are Controlled Industrial Material (CIM) requirements, necessitating two copies of certification as specified.

• Pricing Arrangement: Firm Fixed Price for all line items.

• The specific contract type is not explicitly stated but implied to be a single award.

• Quote Due Date: 06/16/2026, 12:00 PM HST.

• Quotes must be submitted via email to angela.morrelli.civ@us.navy.mil using the attachment "II.S-1. Solicitation - SPMYM426Q3471".

• Required Quote Information: Company information, price of material, manufacturer name (traceability may be requested), Country of Origin, Business size, Delivery date/Lead Time, and whether the offeror is a reseller/distributor/dealer (and if so, pricing agreement/control).

• Evaluation Criteria: The contract will be awarded to the responsible offeror whose technical approach is acceptable and whose price is fair and reasonable. Award will be made on the basis of lowest price, technically acceptable. The evaluation factors are:

  1. Technical Capability (Acceptable/Unacceptable)
  2. Price
  3. Delivery

• Failure to provide required information or meet technical specifications may result in technical unacceptability.

• Set Aside: 100% SMALL BUSINESS.

• NAICS Code: 332313

• FSC Code: 9515

• Offerors must be registered in the System for Award Management (SAM).

• Paper copies of the solicitation will not be available.

• Applicable clauses and provisions are incorporated by reference and can be accessed online.

• Offerors must complete and include provisions 52.204-24, 52.204-26, and 252.204-7019.

• Vendors must list the country of origin for each line item.

Forms / Attachments / Pricing Sheets

This document contains a compilation of Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses and provisions. These are provided for informational purposes and to outline contractual requirements that may apply to a solicitation.

• FAR Clauses: Includes provisions related to covered telecommunications equipment and services (52.204-26, 52.204-24, 52.204-25), prohibition on ByteDance applications (52.204-27), and Federal Acquisition Supply Chain Security Act (FASCSA) orders (52.204-29, 52.204-30).
• DFARS Clauses: Includes provisions for covered defense telecommunications equipment or services (252.204-7016) and Wide Area Workflow (WAWF) payment instructions (252.232-7006).
• DLAD Procurement Notes: Covers various topics including superseded part numbers, manufacturing phase-outs, supply chain traceability, nonconforming packaging/marking, product verification testing, origin inspection, WAWF information, qualified products lists, sourcing for critical safety items, transporter proof of delivery, and offers for part-numbered items.
• Evaluation Factors: Outlines evaluation criteria for solicitations, including technical capability, price, and delivery, often using a Lowest Price Technically Acceptable (LPTA) approach.
• Small Business Representations: Includes provisions for various small business categories (e.g., small business, HUBZone, women-owned, service-disabled veteran-owned) and requires specific representations from offerors.

This document is crucial for bidders as it details the mandatory clauses, representations, and evaluation criteria that will govern any contract awarded under the solicitation. Understanding these requirements is essential for preparing a compliant and competitive offer. Bidders must pay close attention to clauses related to telecommunications, supply chain security, small business status, and evaluation factors to ensure their proposals meet all government specifications and requirements.

Solicitation / RFP / RFQ

This document is a Request for Quotation (RFQ) for the procurement of specific types and thicknesses of steel alloy plates (HY-80, Type I and Type II). The issuing agency is DLA MARITIME - PEARL HARBOR.

• PLATE, 0.500" THICK, STEEL ALLOY GRADE HY-80, TYPE I: Requires adherence to NAVSEA TECH PUB T9074-BD-GIB-010/0300 REV 2, Appendix B. Includes Factory Acceptance Test (FAT) requirements per T9074-BD-GIB-010/0300 (REV2), requiring direct traceability to chemical analysis and mechanical property tests. Additional requirements include Certificate of Conformance (COC), chemical analysis, mechanical properties test, hardness test, non-destructive test, visual inspection, Charpy-V notch test, and UT testing with reports. This is a Controlled Industrial Material (CIM) requirement, with two copies of certification required.

• PLATE, 0.750" THICK, STEEL ALLOY GRADE HY-80, TYPE II: Similar requirements to the 0.500" plate, adhering to the same NAVSEA technical publication and including FAT, COC, chemical analysis, mechanical properties test, hardness test, non-destructive test, visual inspection, Charpy-V notch test, and UT testing with reports. Also a CIM requirement with two copies of certification.

• PLATE, 1.250" THICK, STEEL ALLOY GRADE HY-80, TYPE II: Similar requirements to the other plates, adhering to the same NAVSEA technical publication and including FAT, COC, chemical analysis, mechanical properties test, hardness test, non-destructive test, visual inspection, Charpy-V notch test, and UT testing with reports. Also a CIM requirement with two copies of certification.

• Pricing Arrangement: Firm Fixed Price for all items.

• ACRNs: AA, AB, AC are assigned to the respective line items.

• The document references "See Schedule" for detailed pricing and quantity information, which is not fully included in the provided pages.

• Submission Deadline: Quotations must be submitted by close of business on June 16, 2026.

• Evaluation: The document implies evaluation based on submitted quotations, with specific details likely in the "Schedule" section.

• Contact for Information: Angela Morrelli at DLA MARITIME - PEARL HARBOR (Phone: 808-473-8000).

• The RFQ is marked "IS NOT A SMALL BUSINESS SET-ASIDE."

• The document includes various clauses related to manufacturing phase-out, supply chain traceability, inspection and acceptance, packaging and marking, first article testing, and payment methods (Government Purchase Card and Wide Area Workflow - WAWF).

• Specific delivery dates are listed as July 13, 2026, for multiple line items.

• FOB Destination is specified.

Form / Attachment / Pricing Sheet

This document details "Acquisition Requirements" and "Additional Requirements" for materials, specifically focusing on steel plate, alloy, structural, and high yield strength (HY-80 and HY-100) materials. It references several technical documents and standards that must be adhered to.

• Base Materials: Specifies requirements for low alloy steel plate, forgings, castings, shapes, bars, and heads of HY-80/100/130 and HSLA-80/100, referencing Rev. 2, DTD 18DEC2012.
• HY-80, Type II: Explicitly mentioned as a requirement.
• Testing: First Article Testing is required per specific paragraphs. Working zone temperature surveys are required per SAE-AMS-H-6875. Dimensions for non-standard tensile test specimens are specified.
• Additional Requirements (T9074-BD-GIB-010/0300 Appendix B):
  • Specifies Steel Plate, Alloy, Structural, High Yield Strength (HY-80 AND HY-100) per Rev 2, Appendix B, DTD 12Dec2012.
  • Requires one 0.750" thick X 5 FT X 20 FT plate of HY-80, Type II.
  • Virgin raw material is not required.
  • Ultimate tensile strength to be provided for information only.
  • Simulated stress relief sample is not required.
  • Weld repair is prohibited prior to heat treatment unless specified.
  • No alternate ultrasonic acceptance standard is specified.
  • Applicable fabrication document is NAVSEA T9074-AD-GIB-010/1688 Rev 1.
  • Plate thickness is 0.750" with specified thickness tolerances.
  • Flatness tolerances are specified.
  • Descaling and coating are required per Appendix K.
  • Explosion bulge testing is required for First Article Testing only.
  • First article specimens location is specified.

This document is critical for bidders to understand the precise material specifications, standards, and testing requirements for the components being procured. Adherence to these detailed requirements, including specific document revisions and tolerances, will be essential for proposal preparation and successful contract performance.

Form / Attachment / Pricing Sheet

This document outlines specific acquisition requirements and additional requirements for materials, likely related to a solicitation for steel plate.

• Base Materials: Specifies requirements for low alloy steel plate, forgings, castings, shapes, bars, and heads of HY-80/100/130 and HSLA-80/100, referencing Rev. 2, DTD 18DEC2012.
• HY-80, Type 1: A specific material type is called out.
• First Article Testing: Required IAW specific paragraphs.
• Virgin Raw Materials: Not required.
• Working Zone Temperature Surveys: Shall be conducted per SAE-AMS-H-6875.
• Tensile Test Specimens: Dimensions specified IAW a particular paragraph.
• Additional Requirements (T9074-BD-GIB-010/0300 Appendix B):
  • Steel Plate, Alloy, Structural, High Yield Strength (HY-80 AND HY-100).
  • One 0.500" thick X 8 FT X 20 FT plate.
  • HY-80, Type 1.
  • Ultimate tensile strength provided for information only.
  • Simulated stress relief sample not required.
  • Weld repair limitations.
  • Applicable fabrication document: NAVSEA T9074-AD-GIB-010/1688 Rev 1.
  • Thickness tolerance as specified in Table B-6.
  • Flatness tolerances as specified in Table B-9.
  • Descaling and coating required per Appendix K.
  • Explosion bulge testing required for First Article Testing only.
  • Location of first article specimens specified.

This document details critical material specifications, testing requirements, and fabrication standards. Bidders must carefully review these requirements to ensure their proposed materials and manufacturing processes comply with the government's specifications for this opportunity.

Form / Attachment / Pricing Sheet

This document outlines specific acquisition requirements and additional requirements for materials, likely related to a solicitation for critical applications. It details specifications for steel plate, forgings, castings, shapes, bars, and heads.

• Base Materials: Specifies requirements for HY-80/100/130 and HSLA-80/100 steel alloys, including Type II for HY-80. It references specific revisions of military standards (e.g., DTD 18DEC2012).
• Testing: Mandates First Article Testing and specifies requirements for working zone temperature surveys (SAE-AMS-H-6875) and dimensions for non-standard tensile test specimens.
• Additional Requirements (Appendix B): Details specifications for a 1.250" thick x 5 FT x 20 FT HY-80 Type II steel plate. It clarifies that virgin raw material is not required and provides information-only ultimate tensile strength data. Weld repair restrictions and ultrasonic acceptance standards are also noted.
• Fabrication: References NAVSEA T9074-AD-GIB-010/1688 Rev 1 for applicable fabrication documents.
• Tolerances and Coatings: Specifies thickness tolerances, flatness tolerances, descaling, and coating requirements per various appendices and paragraphs of referenced documents.
• Testing (Specific): Includes requirements for explosion bulge testing for First Article Testing only.

This document is crucial for bidders to understand the precise material specifications, testing protocols, fabrication standards, and quality control measures required for the opportunity. Adherence to these detailed requirements will be essential for proposal preparation and successful contract performance.