Z--Provide Maintenance Repairs for Elevator Cables an

Questions & Answers / Clarifications

This document provides responses to vendor questions regarding the "Provide Maintenance Repairs for Elevator Cables and Painting of Structure" solicitation (Solicitation #140P5126Q0021) for Mammoth Cave National Park.

• PPQ Usage: Previous performance questionnaires (PPQs) from other agencies are acceptable if recent, relevant, and compliant with solicitation terms.
• As-Built Drawings: The available as-built drawings are provided as attachment 0007 of the amendment.
• Scope of "Framework" Cleaning/Coating: Includes all steel, permanent, non-moving structures in the elevator shaft, including the emergency ladder.
• Staging/Parking: Limited to behind the elevator building.
• Existing Coatings: Non-hazardous; lead abatement was completed in 2015. Contractors must conduct their own testing and comply with OSHA.
• SSPC/AMPP Certifications: SSPC/AMPP QP-2 certification is not required. Applicable SSPC standards (listed in the document) must be adhered to.
• Ambient Temperature: Approximately 55 degrees Fahrenheit, +/- 5 degrees.
• Elevator Shaft Safety Training: No specific certification is required, but contractors must ensure employees are physically qualified and trained for safe performance, including climbing and navigating the shaft.
• Paint System: The approved system uses Noxyde red primer and Noxyde federal gray finish (or approved equal), with specific ASTM requirements to be followed. Sherwin Williams Macropoxy 646 and Fast Clad HB are also recommended systems for approval.
• Bid Bond: Not required.
• Work Hours: Typically Mon-Fri, 7:00 am to 6:00 pm. Weekend, holiday, and nighttime work can be approved with 24-hour verbal notice to the COR due to the emergency nature of the project.
• Elevator Status: Currently inoperable.
• Cable Replacement: Priority is to replace the cable first, before coatings application.
• Insulation Panels: The contractor is responsible for painting exposed structures. Panels around the elevator are for enclosure and water infiltration protection and are complicated to remove/replace.
• USDA Verification: Not required.
• Licensed Elevator Tech: Required on-site for critical functions like opening doors, manually stopping the elevator, and potentially cable certification.
• Progress Meetings: Prime Program Managers, site superintendents, and Quality Control managers are required to attend.
• Governor Rope: Governor cables are to be replaced.
• Prevailing Wage: Elevator mechanics/technicians are included.
• Stripe Coat: Park facilities are unclear on the necessity or definition of a "stripe coat" and do not believe it is necessary unless defined by another common name.

These clarifications address specific requirements, scope, materials, and procedures, potentially impacting bidder understanding and proposal preparation. The document confirms that the elevator is inoperable and cable replacement is the priority. It also clarifies the paint system and required certifications.

Amendment / Modification

This amendment (0002) to solicitation 140P5126Q0021 provides responses to vendor questions and includes several attachments:

• Questions and Answers: Provided as attachment 0006.

• As-Builts: Provided as attachment 0007.

• Drawings: Provided as attachment 0008.

• Elevator Shaft Plans: Provided as attachment 0009.

• Questions and Answers (Attachment 0006): Clarifies scope, hazardous materials, safety requirements, and coating systems.

  • Scope includes all permanent, non-moving structures in the elevator shaft for cleaning and coating.
  • Existing coatings are non-hazardous; lead abatement was completed in 2015.
  • SSPC/AAMP QP-1 certification is not required, but applicable SSPC sections are.
  • Ambient temperature is approximately 55 degrees Fahrenheit (+-5).
  • No specific safety certification is required, but personnel must be qualified and able to navigate the shaft.
  • Approved coating materials include Noxyde (Rust-Oleum) or approved equal, with specific ASTM requirements to be followed. Sherwin Williams Macropoxy 646 and Fast Clad HB are also recommended systems.
  • A bid bond is not required.
  • Work hours are typically Mon-Fri, 7:00 am to 6:00 pm, with potential for weekend/holiday/night work with 24-hour notice.
  • The elevator is currently inoperable.
  • Cable replacement must be done before coatings application.
  • The backside of framing facing insulation is to be cleaned and painted; panels may need removal/replacement.
  • USDA verification is not required.
  • A licensed elevator technician is required on-site for critical functions like opening doors and overriding elevator operation.
  • Prime Program Managers, site superintendents, and QC managers are required to attend progress meetings.
  • Governor ropes are to be replaced.
  • Prevailing wage applies to elevator mechanics/technicians.
  • The need for a "stripe coat" is unclear and likely not necessary.

• Attachments: New attachments (0006, 0007, 0008, 0009) are provided.

• The period of performance is now 05/18/2026 to 03/01/2027.

• Bidders should review the Q&A and new attachments for updated requirements and details.

Form / Attachment / Pricing Sheet

This document contains architectural drawings detailing the elevator shaft plans, including sections, isometric views, elevation views, and anchor details. It is intended to provide specific construction and design information for the elevator shaft.

• Sections (AA, BB, CC, DD): Illustrate cross-sections of the elevator shaft, showing structural elements, drainage systems, and reinforcement.
• Isometric View: Provides a three-dimensional perspective of the elevator shaft, highlighting drainage pipes, return ducts, and structural connections.
• Elevation View: Shows the vertical aspects of the elevator shaft, including door openings and drainage termination.
• Anchor Detail: Details the method for anchoring steel reinforcing bars into the bedrock substrate.
• General Notes: Includes critical information regarding the protection of elevator equipment from shotcrete, installation of drainage media and pipes, sump pit drainage, and contractor responsibilities for excavation and protection.

This attachment is crucial for bidders to understand the specific design, structural requirements, and drainage systems for the elevator shaft. It directly informs the scope of work, material specifications, and installation procedures required for the construction or modification of the elevator shaft. Bidders must review these plans to accurately estimate costs, develop a compliant technical approach, and identify any potential site-specific challenges.

Form / Attachment / Pricing Sheet

This document contains drawings and notes related to the elevator support structure at Mammoth Cave National Park. It is provided for informational purposes to supplement original construction drawings and is not intended to direct the current work.

• Tower Elevation: Details the vertical structure of the elevator tower, including existing components and proposed modifications.
• Typical Tower Section A-A: Illustrates a cross-section of the tower, showing structural elements like column legs and braces.
• Notes: Provides critical information for bidders, including:
  • References to original construction drawings (W.E. Caldwell Company, Inc., dated 1-31-57).
  • Requirement for bidders to visit the site and verify existing conditions.
  • Instructions for repainting the existing tower.
  • Identification of deteriorated structural bolts due to corrosion.
  • Specifications for replacing deteriorated bolts with A-325N or A-325X, ¼" bolts, including cleaning, priming, and tightening methods.
  • A minimum of 100 bolts are to be replaced, with any additional bolts requiring owner approval and a unit price submission.
  • Prohibition of removing bolts during elevator operation.
• Elevator Details: Mentions the existing elevator's capacity (3,000 LBS), operating speed (100 FT/MIN), control type, and car enclosure.
• Required Work: Indicates the need to remove existing conduit and wiring, furnish and install new hoist ropes, shackles, and guide assemblies, and provide new conduit boxes and wiring at the bottom hatch.

This document is crucial for bidders to understand the existing conditions of the elevator support structure, the scope of potential repairs or replacements (specifically regarding bolts), and the overall context of the project. It highlights the need for site verification and provides specific technical details for structural components and elevator parts that may require attention or replacement.

Form / Attachment / Pricing Sheet

This document contains "As-Built" drawings for the Mammoth Cave Elevator Shaft project. These drawings provide detailed plans, sections, and elevations of the existing elevator shaft, including its structure, components, and surrounding rock face. They are intended for reference by contractors to understand the current state of the shaft prior to any proposed work.

• Detailed schematics of the elevator shaft, showing dimensions, elevations, and existing structural elements.
• Illustrations of the rock face, existing frame, ladder, and platform within the shaft.
• Depictions of the rock catch system and encapsulation liner.
• Specific details on anchor points, rock bolts, mesh, and cable systems.
• Notes regarding the "As-Built" data being provided for reference only and the contractor's responsibility to verify all information.

Bidders can use these "As-Built" drawings to:

• Accurately assess the existing conditions of the elevator shaft.
• Understand the scope and complexity of the work required.
• Identify potential challenges or constraints related to the existing structure and rock formations.
• Develop more precise proposals and cost estimates by having a clear visual representation of the project site.

Amendment / Modification

• The due date for receipt of quotes has been updated.

• The elevator is currently out of service due to a snapped lift cable requiring replacement.

• The deadline for quote submission has been extended.

• The new deadline for submitting quotes is May 13, 2026, at 1:00 PM EST.

• The period of performance remains 05/18/2026 to 03/01/2027.

Solicitation / RFP / RFQ

This is a combined synopsis/solicitation for commercial services to perform complete repainting of the structural steel elevator shaft and full replacement of deteriorated lift cables within Mammoth Cave National Park. The work is technically complex due to the confined, damp, and enclosed vertical shaft environment.

• Repainting of the 270-foot-high steel elevator support structure.

• Replacement of all deteriorated elevator lift cables.

• Cleaning and preparing all structural steel framing, ladders, landings, and other exposed steel elements.

• Applying rust-inhibitive primer and high-performance epoxy topcoats.

• Installation of new elevator lift cables conforming to NEII and ANSI A17.1 code requirements.

• Implementation of ventilation, containment, environmental, and worker safety controls.

• Strict environmental controls to prevent contamination within the cave.

• Quality assurance testing, certifications, and shaft restoration.

• Contract Type: Single Firm-Fixed Price Contract.

• Period of Performance: Estimated to be from 06/01/2026 to 03/01/2027.

• Performance and payment bonds required at 100% of contract price within 10 days of award.

• Insurance certificate required with minimum coverage of $50,000 per person, $100,000 per occurrence, and $100,000 per property, submitted within 10 days of award.

• Submission Due Date: May 21, 2026, 1:00 PM Eastern Daylight Time (EDT).

• Quotes must be submitted electronically to edward_dingle@ios.doi.gov.

• Evaluation Criteria: Best Value – Lowest Priced Technically Acceptable (LPTA).

• Evaluation Factors: Price, Technical Ability and Approach, and Past Performance.

• Technical and Past Performance, when combined, are approximately equal to cost or price.

• Quotes must be rated acceptable in all evaluated areas to be deemed acceptable.

• Questions must be submitted in writing via email by May 07, 2026, 4:00 PM EDT.

• Set Aside: 100% Small Business.

• NAICS Code: 238290 (Other Building Equipment Contractors), with a small business size standard of $22,000,000.00.

• Offerors must have current Representation and Certifications in SAM.gov and be registered in SAM.gov.

• A site visit is scheduled for May 04, 2026, 09:00 AM EDT.

• The solicitation document and incorporated provisions and clauses are effective through Federal Acquisition Circular (FAC) 2026-01 dated March 13, 2026.

• Attachments include Statement of Work, Wage Determination, Price Schedule, Site Visit Information, and Past Performance Questionnaire.

Form / Attachment / Pricing Sheet

This document is a Wage Determination (No. 2015-4679, Revision No. 30) issued by the U.S. Department of Labor, Employment Standards Administration, Wage and Hour Division. It establishes the minimum wage rates and fringe benefits required for various occupations under the Service Contract Act for work performed in Edmonson County, Kentucky.

• Lists numerous occupational codes and titles, ranging from administrative and clerical roles to technical, health, and service occupations.
• Specifies the minimum hourly wage rate for each occupation.
• Details required fringe benefits, including Health & Welfare rates ($5.55 per hour or $222.00 per week) and specific provisions for Executive Order 13706 (Paid Sick Leave) and Executive Order 13658 (Minimum Wage).
• Includes notes on hazardous pay differentials (8% for high hazard, 4% for low hazard) and uniform allowances.
• Outlines the conformance process for occupations not explicitly listed.

This wage determination is critical for any bidder on a federal contract in Edmonson County, Kentucky, that is subject to the Service Contract Act. Bidders must use these rates to accurately calculate labor costs for their proposals. Failure to comply with these wage and benefit requirements can lead to bid disqualification or contract non-compliance. It ensures that employees performing contract work are paid at least the minimum rates established by the Department of Labor.

Form / Attachment / Pricing Sheet

This document is a pricing schedule for Solicitation Number 140P5126Q0021, related to the "Provide Maintenance Repairs for Elevator Cables and Painting of Structure" project at Mammoth Cave National Park. It details the expected costs for the base contract and any option line items.

• Solicitation Number: 140P5126Q0021
• Project Title: Provide Maintenance Repairs for Elevator Cables and Painting of Structure
• Location: Mammoth Cave National Park, Mammoth Cave, Kentucky
• Line Item 1: "Provide Maintenance Repairs for Elevator Cables and Painting of Structure" is a Lump Sum (LS) item with a quantity of 1 and a Unit Price and Total Price of $0.0.
• Cost Breakdowns Sheet: Includes categories for Total Material Cost, Total Labor Cost, Total Equipment Cost, and Total Direct Construction Costs for "Elevator Lift Cable" and "Painting of structural steel elevator shaft," all with $0.0 values.

Offerors are required to submit an offer that includes pricing for all base and option line items. Failure to provide pricing for all items may result in an unacceptable proposal. Bidders must provide the total price for lump-sum items and unit price with extended total price for unit-priced items. Costs for work not explicitly listed should be included in related items. The document specifies that in case of calculation errors, the unit price governs, and in case of summation errors, the corrected amounts govern. Totals and extended prices should be rounded to whole dollars.

Form / Attachment / Pricing Sheet

This document provides information regarding a mandatory site visit for an upcoming solicitation (RFP # 140P5126Q0021). The site visit is intended for interested parties to assess local conditions that may affect the conduct of operations and costs for the repainting of a structural steel elevator shaft and replacement of lift cables at Mammoth Cave.

• Project Description: Repainting of structural steel elevator shaft (approx. 270 vertical feet) and full replacement of deteriorated lift cables.
• Work Involved: Environmental containment and shaft ventilation, lift cable removal and installation, SSPC-compliant surface prep and epoxy painting, hot work/fire watch, and strict environmental controls.
• Location: Mammoth Cave National Park, 1 Mammoth Cave Pkwy, Mammoth Cave, Kentucky 42259.
• Date and Time: Monday, May 04, 2026, at 09:00 AM EST.
• Questions Submission: All questions must be submitted electronically in writing to edward_dingle@nps.gov no later than Wednesday, May 06, 2026, at 4:00 PM EST. No telephonic questions will be accepted. A summary of Q&A will be provided as an amendment.
• Site Visit RSVP: Parties planning to attend must RSVP by Friday, May 01, 2026, 3:00 PM EST to Christopher D. Parker (Christopher_Parker@nps.gov or 479-597-0901).
• Important Note: No individual site inspections will be offered.

Attendance at this site inspection is considered vital for preparing a competitive and cost-effective quote. Failure to attend may not be used as justification for omissions or miscalculations in proposals. It is highly advantageous for interested parties to have qualified representation at the site inspection. Information gathered during the site visit is crucial for understanding the scope and potential challenges of the project.

Statement of Work (SOW) / Performance Work Statement (PWS)

This Statement of Work (SOW) details the requirements for the cyclic repainting of a 270-foot-high steel elevator support structure and the replacement of all deteriorated elevator lift cables within the vertical elevator shaft at Mammoth Cave National Park.

• Cleaning and preparing all structural steel framing, ladders, landings, and other exposed steel elements within the elevator shaft.

• Applying rust-inhibitive primer and high-performance epoxy topcoats to prepared surfaces.

• Installing new elevator lift cables conforming to NEII and ANSI A17.1 code requirements.

• Implementing ventilation, containment, environmental, and worker safety controls in a damp and enclosed vertical shaft environment.

• The work is located within the vertical elevator shaft of Mammoth Cave National Park's primary visitor elevator.

• The shaft descends approximately 270 feet into the cave system.

• The work environment is damp, confined, and may have elevated humidity and condensation.

• Stringent adherence to environmental controls, air quality, and worker safety is required per OSHA 1926, NFPA 101, and NPS cave protection standards.

• Contractor must confine operations to designated areas and ensure the elevator shaft is closed to the public and park staff during construction.

• Protective barriers and guards are required at access points.

• Damage to cave walls, formations, or park facilities must be prevented and remediated at the Contractor's expense.

• No fuel-powered equipment is allowed in the shaft; only low-VOC, OSHA-compliant, explosion-proof equipment is permitted.

• Contractor must install negative-pressure ventilation with HEPA and LEL monitoring.

• OSHA 29 CFR 1926 compliant fall protection, scaffolding, and confined space protocols are mandatory.

• All personnel must be trained in elevator shaft safety.

• Hot Work operations require a site-specific Hot Work Permit Program and presence of fire watch personnel and extinguishers.

• Prior to mobilization, submit plans for surface prep and painting, containment/ventilation, lift cable specifications, safety, work schedule, equipment/paint data, and subcontractor qualifications.

• Includes final cleaning, surface restoration, demobilization, and submission of punch list completion, as-built logs, paint batch reports, vapor test logs, photo documentation, warranty documents, and certified test results for lift cables.

Form / Attachment / Pricing Sheet

This document is a Past Performance Questionnaire (PPQ) for Solicitation # 140P5126Q0021. It is used by the National Park Service to gather feedback on a contractor's performance for a previous or current contract. This information will be used in the evaluation of quotes for the upcoming project.

• Contract Information: Details about the referenced contract, including number, value, period of performance, and a description of services provided.
• Contact Information: Fields for the alternate Point of Contact (POC) for the questionnaire and the Offeror's contact details.
• Performance Evaluation: Sections to rate the contractor's performance in areas such as meeting requirements, timeliness, ability to resolve timeliness problems, quality of work, and overall rating. This includes definitions for performance ratings (Exceptional, Very Good, Satisfactory, Marginal, Unsatisfactory, N/A).
• Comments: Space for detailed narratives to support the ratings provided.

Bidders must ensure that the entity they list as a reference completes this questionnaire accurately and favorably. The feedback provided in this document directly impacts the past performance evaluation, which is a significant factor in the overall award decision for Solicitation # 140P5126Q0021. Bidders should also ensure their contact information is correct and that they have provided the correct contract information for their references.